fixed to display online status only if is the current user and
if they have been active in the last 7 minutes. Respective color
is shown depending on if they are in "do not disturb" mode or they
have been active more than 5 minutes ago
Closes#3282
Avoid computation when it is not needed for the suggestion filter
This is quite visible when the member list contains 1000s of members.
It is the case when you load historical message (1 month)
This commit enables users to enter fully qualified ENS names manually
and marking them as mentions, which are then later being replaced with
pubkeys.
The changes do not prevent users from entering ENS names that don't exist.
There's also a fix that ensure prepended "@" signs are removed from the
items selected in the suggestions box.
Closes#3149
Removed all computation of suggestion from qml
Reuse user list in order to populate the suggestion box
As a side effect, the suggestion are not serialized from qml to
nim
Remove InputArea which seems not used anymore
fixes#3251
- Being able to react in timeline chat
- Once there is a reaction, being able to remove them or add new
- Height of the message taking in consideration if there is reaction or
not
As requested by design popup search added for the left side, click on a search
field (above channels list).
Refers to the changes requested by the issue-2934
Fixes: #2934
The transfer ownership popup triggered by the backup community baner button
was behaving weirdly because the banner from where it originates lives inside
a loader that is deactivated once the popup was opened.
Moving the logic that deactivates the loader into the onClosed handler of the
popup solves this issue.
Thanks to @pinebit for getting to the bottom of this!
Fixes#2997
Updated offset of the notification tooltip arrow based on if the members list is visible. The arrow should be in center when member list is visible else it should be right aligned as there is no place on the window
fixes#3102
Updated from PopupMenu to StatusPopMenu. Removed buttons not in design.
Also added left and right button functionalXity on memeber list
fixes#2956, #3162
Feature added. Firstly we check if the searched message is already displayed and if yes simply jump
to it, if not then we are loading new 20 messages in the past using cursor and check if the
searched message's id is among those received messages. We do that in a loop till we find the
message we are searching for.
Fixes: #3005
Searching messages by some term for a specific channel is added on the side of status-go and an
appropriate part on the side of nim is developed accordingly.
Fixes: #2912
Current code adapted to handle future changes on message search (like searching message in multiple
channels).
Memory leak which was happening in qml assigning (copying) MessageItem to qml variable messageItem
(where that qml variable messageItem was never deleted) is fixed.
Fixes: #2912
Searching messages by some term for a specific channel is added on the side of status-go and an
appropriate part on the side of nim is developed accordingly.
Fixes: #2912
Current code adapted to handle future changes on message search (like searching message in multiple
channels).
Memory leak which was happening in qml assigning (copying) MessageItem to qml variable messageItem
(where that qml variable messageItem was never deleted) is fixed.
Fixes: #2912
This broke during the modal refactoring because we're no longer relying
on `chatsModel.contextChannel`.
Passing the channel item to the popup ensures it's properly hydrated again.
Closes#3050
This also updates StatusQ as the underlying StatusListItem component wasn't able
to handle multi-line subtitles very well. Also it didn't support tertiaryTitle, which
is needed in this UI.
As described in #3015, when editing channels that belong to a category of a community,
after saving them, they'll get kicked out of the category.
This is because we haven't passed the category id along the API that performs the
save operation.
This commit ensures we have access to a category chats' `categoryId` and send it
over to `editCommunityChat` RPC API provided by status-go
Fixes#3015
There are a few issues with the popup's content when there are many channels in a community:
1. Channel items belonging to other categories would still take space in the list
1. Due to the longer list of channels, the delete button wouldn't be fully visible (scrolling down
helps here)
2. Scrolling down is hard because the `ListView` in use is `interactive`
3. Even when `interactive` is set to false, one would scroll the name input out of the viewport.
To solve these, this commit rearchitects the popup's content such that:
1. The name input is always static and in place
2. The scrollview starts with the channel list and ends with the channel list
3. The delete button is positioned below the scrollview
4. The scrollview has a max height of 300 so that the popup doesn't grow too big
5. Invisible channel items won't have a height anymore
The result is that the middle section of the popup becomes scrollable in case there's many
channel items, while both, the name input and the delete button stay in the viewport.
Fixes#3013
This was lost during the refactor to use StatusQ components because it wasn't
clear to me that community channel descriptions should be rendered there.
Fixes#2982
When right-clicking a community from the navbar and selecting "View community", Status Desktop
opens `CommunityMembersPopup` which looks like it was either never really finished or more of an
intermediate solution until a proper community profile popup was created.
That's why this commit replaces it with a `CommunityProfilePopup` instead.
In fact, this lead to changes in `CommunityProfilePopup` where the `activeCommunity` dependency
is entirely removed, which allows us to use this popup in various places given that it's hydrated
with proper data.
Because we're no longer relying on `activeCommunity` inside that popup, all of its children and
connected popups needed that same refactor as well, hence this PR introduces a few more changes.
Closes#2890
This replaces the modal popup with `StatusModal` in the `CreateCommunityPopup`
and also ensures that it adheres to the design.
There are still things to be refactored in here, primarily form control components.
Those will be tackled in future commits once they have been built in StatusQ
Closes#2882
There was a change in StatusQ that introduced dividers for modal footers
and headers, so we don't need to put them in the content manually anymore.
This commit removes the no longer needed ones.
Toast message is added when user access an existing community using community's private key. Toast
message with message that importing community is in progress is displayed while community is being
imported and once it is imported toast is closed and new one, which will be closed in 4 seconds,
with message that community is imported is displayed.
Fixes: #2467
The reason for this issue is a message where recipient accepted to share his address with sender.
In that message recipient's public key is set as a "from" property of a "Message" object and we
cannot determine which of two users has initiated transaction actually.
This is fixed checking if the "from" address from the "commandParameters" object of the "Message"
is contained as an address in the wallet of logged in user. If yes, means that currently logged in
user has initiated a transaction (he is a sender), otherwise currently logged in user is a
recipient.
We were just sending a transaction, without notifying message about that. Now we call
callPrivateRPC("acceptRequestTransaction".prefix, %* [transactionHash, messageId, signature])
and that notifies message about the change, but only on the sender side. Appropriate message
on the recipient side was not notified about the change. That need to be checked.
This commit refactors the `CommunityProfilePopup` to use `StatusModal`. Since it's made of
various popup content components, it also updates the memberlist, the overview and the
invite friends view, so it doesn't break the UI along the way.
Closes: #2885, #2887, #2888
There are two regressions introduced in 080767c338 where
the `CreateChannelPopup` isn't properly centered when triggered in edit mode,
and that the channel name field isn't hydrated with channel data.
This commits fixes both bugs.
This bug is happening if you have more than one private chat in the contacts column. How many chats
you have that many same notifications you will get. That's happening cause connection is made
between chatsModel.messageView and ChatsMessages component for each private chat, and for each of
them ChatsMessages component is maintained in StackLayout component what means all of them are
exist but only selected instance is visible. When new messageNotificationPushed signal is emitted
each qml component triggers its slot (regardless component is not currently visible it exists in
the background, it's not deleted) and that's why we see more than one OS' notification bubble for
the same notification.
That is fixed moving slot from ChatMessage component to ChatColumn component.
Fixes: #2551
Also fixes a bug where if the search was cleared, messages would after that appear all on top of each other.
Also leaves the popup live after closing so the search can be gone back to
The issue is happening randomly. I managed to catch it few times and hopefully fix it. Problem was
in leave proc in src/status/chat.nim cause we were sending activeChannelChanged signal from it what
started setting activeChannel to the value of the backToFirstChat variable, and while that process
was in progress setActiveChannelByIndex was called from activeChannel what caused another emit of
activeChannelChanged signal while the previous one was not completed. That caused new setting of
activeChannel with active channel index 0, what caused an app crash.
This is fixed by setting active channel to the first one from the list when we get a signal that
any channel from the list is removed. This way activeChannelChanged is broadcasted to the other
parts correctly.
Fixes: #2825
This issue is being happened randomly, no general rule, in my case it happens often when you accept
first contact from the list immediately after the app start, but the ticket says that it happens
when you click accept while context menu is opened.
Two places were threat for this crash and both are fixed here:
- getChannel proc, direct access by index to Chat element of the chats sequence,
- setChatItem proc, where we actually were setting chatItem and accessing its property without
checking if it is an empty object.
Fixes: #2837
A crash is happening not only when you click on a notification bubble with mentions, but on any
chat notification displayed in macOS' notification center. Discussion and details how we can
overcome this may be seen on zenhub, in issue 2819. So far this commit is just a simple solution
to avoid an app crash.
Fixes: #2819
This commit replaces the `TopBar` components with StatusQ's `StatusChatToolBar`
and touches a few other things as part of this refactoring, namely:
1. `ChannelContextMenu` has been renamed to `ChatContextMenu` and is now a `StatusPopupMenu`
2. Leftover components have been removed: `StatusChatInfo`, `StatusChatInfoButton` and `TopBar`
3 `ActivityCenter` has been moved into `ChatColumn.qml` because `StatusChatToolBar` doesn't provide it
4. `Share chat` option in `ChatContextMenu` has been removed as it wasn't doing anything.
Closes#2746
This commit replaces `CategoryList` and `ChannelList` with `StatusChatListAndCategories`,
`StatusPopupMenu` etc. provided by StatusQ.
It also removes components that lived inside Status Desktop but are no longer used
anywhere after the refactor.
Since StatusQ components are decoupled from UI model logic, we also needed to introduce
a new API retrieve a community category from within QML.
Closes#2805
A reason why the crash is happening is actually previous step, when an user who is about to receive
a transaction clicks "confirm and share address" button. In that moment instead of his address an
empty js object is shared. After that clicking on the "sign and send" button, by sender, causes an
app crash because transaction cannot be made using invalid address of the recipient.
Fixes: #2718
Mark all mention notifications as read is fixed. Also mark as read one by one notification removes "@" from the appropriate channel along with the marking as read last mention notification for that channel. hasMention field which was bool is switched with mentionsCount field which is int, so we have evidention how many mentions were for each channel.
Fixes: #2788
This first step in leveraging StatusQ components. This sets up the overall
app layout, allowing us to use other sub view layouts provided by StatusQ,
such as `StatusAppTwoPanelLayout`.
This commit primarily touches the application navbar, leaving layout changes
in dedicated views for future commits.
Partially closes#2688
Fixes: #2649.
Upon receipt of status-go signals which included communities that have been left (`joined: false`), those communities were being rejoined automatically when they should not have been.
fix(communities): Invitation bubble button state updates
The community state inside of the invitation bubble was not reactive to any community actions (such as joining, leaving, updating). In addition, requesting to join a community changed the button’s text to “Pending”, but upon approval, the button’s state was not updating.
The component was setting an observed community in the Component.onCompleted event, which was occurring for all invitation bubbles, but because the community wasn’t bound correctly to the bubble, once a bubble with a different community was encountered, the community in context of the bubble wasn’t updated and instead used a local copy. Once the community was bound correctly (to be reactive), the states started working correctly.
The invitation bubble has been simplied so that it has states instead of using lots of if/else statements inside of the property bindings. This simplified the component’s logic for things like onClick action and made it a lot easier to read and modify.
add getSettings methods to src/status
fix issue with calling getSettings; document issue
remove most direct references to libstatus; document some common issues
remove most references to libstatus wallet
add mailserver layer to status lib; remove references to libstatus mailservers
remove libstatus accounts references
move types out of libstatus; remove libstatus types references
remove libstatus browser references
refactor libstatus utils references
remove more references to libstatus stickers
remove references to libstatus constants from src/app
remove more libstatus references from src/app
refactor token_list usage of libstatus
refactor stickers usage of libstatus
refactor chat usage of libstatus
remove libstatus references from the wallet view
remove logic from ens manager view
fix issue with import & namespace conflict
remove unnecessary imports
refactor provider view to not depend on libstatus
refactor provider view
refactor: move accounts specific code to its own section
fix account selection
move collectibles to their own module
update references to wallet transactions
refactor: move gas methods to their own file
refactor: extract tokens into their own file
refactor: extract ens to its own file
refactor: extract dappbrowser code to its own file
refactor: extract history related code to its own file
refactor: extract balance to its own file
refactor: extract utils to its own file
clean up wallet imports
fix: identicon for transaction commands
Fixes#2533
Fixes: #2486.
In the community member managment popup, for the current user, remove the “more actions” menu that allows kicking of the user and viewing of their profile.
Fixes: #2601.
Kicking a user and re-inviting them now correctly redisplays the join/decline options. Other combinations of User B leaving or declining an invitation are not handled. Please see the notes below for clarification.
Additionally, the group invite popup (that shows the list of members belonging to the group) correctly shows when a user is kicked or when a user leaves the group in real time. Previously, the popup needed to be reopened to display this.
fix: decline invitation crash
Declining a group invitation was crashing the app. This has been fixed.
### NOTES
1. In the case where User A invites User B to a group, but User B declines (or User B joins, then leaves), then from a status-go standpoint, User B is still part of the group, but the chat is marked as `active: false` for User B. This creates a situation where User B cannot re-join the group once s/he has declined the invitation. @cammellos mentioned there possibly will need to be a refactor of cab6281dc5/protocol/messenger.go (L1710) (which, by retaining User B as a member, effectively prevents the re-invitation) once “swipe to delete” is implemented on mobile. There is an activity center notification received for User B that is meant to allow re-joining of the group when the notification is accepted. The activity center notification received from status-go looks like the following:
```json
"activityCenterNotifications": [
{
"id": "0x0e342d33",
"chatId": "e342d33f-dd05-4d7b-b14e-b5335e1a3ee9-0x043bf46aa874c377a34946eab67a32cf36c15907b328216dfce375d169fed7d81c21cada3229db1fd37c762d2c02702111a646657feca6621e2e948febcf378fb4",
"name": "test-22",
"type": 2,
"lastMessage": null,
"message": null,
"timestamp": 1623305612000,
"read": false,
"dismissed": false,
"accepted": false
}
]
```
Closes#2344.
Add ability to edit name, description, and private fields of a community channel.
feat: Display community channel description
Ensure the width of the description does not surpass the context menu and instead wraps to the next line.
feat: After channel is created, set it as the active channel
For new and existing communities, force the `require approval` membership requirement in the create/edit community popup.
### NOTE
This will not affect the membership requirement value already-created communities.
When inviting contacts to a community, Status Desktop suggests a list of
all contacts, even if contacts of that list are already members of the community.
This commit introduces a new flag to `ExistingContacts` component that
allows for configuring whether community members should be hidden or not
Fixes#2502
Fixes: #2365.
Previously, suggestions for mentions were showing profile pics even for users who were not contacts. Now, profile pics are only shown for those users who are contacts. The user’s identicon is shown otherwise.
fix: user thumbnail not shown when no profile pic
When a user was a contact, but didn’t have a profile pic, an image would not be loaded and a ‘reload’ image would be shown instead. With this PR, if the user is a contact and they do not have a profile pic, their identicon will be shown instead.
Fixes#2448.
Currently, if a wrong password is entered when generating a wallet account, the app will crash due to attempting to decode a `GeneratedAccount ` from an rpc response containing only an error.
With this PR, we are detecting if an error is returned in the response, and if so, raising a StatusGoException. This exception is caught in the call chain, and translated in to a `StatusGoError` which is serialised and sent to the QML view, where it is parsed and displayed as an invalid password error in the input box.
refactor: remove string return values as error messages in wallet model
In the wallet model, we were passing back empty strings for no error, or an error as a string. This is not only confusing, but does not benefit from leaning on the compiler and strong types. One has to read the entire code to understand if a string result is returned when there is no error instead of implicitly being able to understand there is no return type.
To alleviate this, account creation fundtions that do not need to return a value have been changed to a void return type, and raise `StatusGoException` if there is an error encountered. This can be caught in the call chain and used as necessary (ie to pass to QML).
refactor: move invalid password string detection to Utils
Currently, we are reading returned view model values and checking to see if they include a known string from Status Go that means there was an invalid password used. This string was placed in the codebased in mulitple locations.
This PR moves the string check to a Utils function and updates all the references to use the function in Utils.
Fixes#2419
Makes it so the private key is elided by default so you can see it all from the get-go. If you focus the field, the key will "unfurl" and you can copy it manually.
Otherwise. the Copy button will always copy the whole key
Fixes: #2364
The Send Message button click event was erroring due to a refactor that had been done to allow for changing app sections.
This has been updated to follow the current way to change app sections.
fix: “Send Message” button crash in communities
This required switching from communities to normal view.
fix: crash when clicking channel link in community message
When a message in communities contains a link to another channel (ie #otherchannel), the search for this channel needed to be updated to also search for the channel by name, allowing for switching between channels within a community by message link. Additionally, when in a community, if the channel was located in a normal chat, it will switch the view to the normal chat after being found.
Fixes: #2257.
If a user had selected a watch-only address in the wallet, the backend `walletModel.currentAccount` property would also change. When loading a transaction modal, this property was used to set the `selectedAccount` value for the “from” `AccountSelector`, regardless if the account was a watch-only address.
This PR updates the logic for `selectedAccount` such that it will only allow the account to be selected if it is not a watch-only account.
The popup to invite friends to communities has so far always been a brand new
popup that's opened on top of possible existing popups.
The design however, expects that the same section should be shown as part
of a wizard-like process inside of the existing community profile overview
popup, when entered from there.
This commit extracts the invite friends popup section into component that
can be reused as stack view, as well as modal content, to implement both
scenarios.
This commit changes a bunch of things related to ui bugs in the community
profile popup. Fixes include:
- Removing the `Delete Community` option since this functionality isn't implemented yet
- Changing the color of the menu item's icons in dark mode to be blue
- Doing the same in the memberlist popup
There's a regression in the application where kicking members from communities
doesn't work anymore. This was due to UI logic being moved to a different model
without updating the corresponding view action.
Fixes#2274
Prior to this commit, only admins of a community could open up the community
profile popup from inside the community. However, normal members should be able
to do so too.
Normal members shouldn't be able to create channels, nor should "leave
channel" be an option of the context menu provided inside of a community.
This commit removes these.
This commit introces global settings that apply across accounts used
inside the application. This is useful when settings like the selected
locale should b the same across all accounts.
Closes#2144
Fixes#2050.
This PR contains changes to fix the name validation for new communities and new channels in communities. In the process of updating this, better validation was also added to both popups (create community and create channel), including the prevention of the "Create" button from being enabled until all form fields were valid.
During this process, it was noticed that the community image cropper was not actually cropping the image *in the preview*. Once the community was created, status-go was successfully cropping the image as the user intended. However, the preview thumbnail prior to creation was not accurately showing the cropped image preview and showing the entire image centred instead. *This is still yet to be fixed.* One solution is to upgrade Qt to `5.15` to take advantage of Image QML's `sourceClipRect`.
Alright, this is an interesting one:
As described in #1829, when the profile popup is opened within the chat view,
users are still able to click *through* the popup on message, which then puts them in
an active state.
I've done a bunch of debugging as described [here](https://github.com/status-im/status-desktop/issues/1829#issuecomment-804748148) and after doing some
further debugging, I found out that `isMessageActive` isn't really the culprit here.
What causes this effect is the `HoverHandler` that's attached to the `CompactMessage` item.
`HoverHandler` is a standard QML type that emits `hoverChanged` signals so one can do things like
applying hover effects on elements, which is exactly what we do:
```
HoverHandler {
onHoverChanged: {
root.isHovered = hovered // `root` being the message item
}
}
```
I assume we went with this handler because putting a `MouseArea` in there instead, which fills
the entire message component pretty much eliminates all existing mouse handlers attached to
other child components, such as the profile image or the username of the message, which also
open a message context menu.
It turns out that, having a `HoverHandler` as described above, actually activates it when the
user clicks with the left mouse button as well (not just on hover). That's what causes the "click-through"
effect. This can be verified by setting `acceptedButtons` to `Qt.RightButton`, basically telling
the handler that only right clicks will activate it.
I then tried using `Qt.NoButtons` instead so that no button clicks and only hovers will activate
the handler, but that didn't seem to have any effect at all. It still defaults to `Qt.LeftButton`.
So the last resort was to disable the `HoverHandler` altogether, whenever either the profile popup,
or the message context menu (for emojis etc) is open.
Unfortunately, we don't have access to the profile popup in the compact message component, because it's
detached from the component tree. Therefore, I've introduced a new property `profilePopupOpened` on
the chat layout, which we can read from instead.
Fixes#1829
This commit introduces a `reset()` function so that search results inside
the application can be easily reset. It also introduces a `resultClickable`
flag which allows consumers of this component to decide whether a search result
is clickable and emits a dedicated event.
This is useful when UIs should only allow actions via the result icon button
(as it's the case with the new add-to-contact modal).
This change aligns the member list's look & feel of the community profile popup
with the designs by implementing the proper member list items styles, hover effects
and fine-tuning the context menu.
This commit also comments some of the actions provided by the context menu,
which aren't implemented yet. There's no point in having UI components that don't or
can't function.
Those will be re-introduced once they are actually implemented.
Closes#1959
The designs for the membership request button look different now, so this
commit makes use of the `StatusSettingsLineButton` to implement that new
look & feel.
Prior to this commit, the community memberlist was represented in a nested modal
which doesn't adhere to the designs. Rather, the section should render inside the
existing modal, requiring it to be refactored using a `StackView`.
This commit refactors the community profile popup so that the different content
sections ("Overview" and "MemberList") are rendered inside of the popup and can
be pushed onto and popped off a stack view.
The content components (newly introduced in this commit) `CommunityProfilePopupMembersList`
and `CommunityProfilePopupOverview` need to define a `headerTitle`, `headerDescription` and
if needed `imageSource` so they can alter the modal's header.
The same pattern might be used in other places of the modal if required.
Partially fixes#1959
Allow up to 5 images to be dragged and dropped in to one-on-one chats and in the timeline. Can be combined with the existing upload button. The upload file dialog has been changed to allow multiple selections. Drag and dropped images adhere to the following rules, with corresponding validations messages:
- Max 5 image
- Image size must be 0.5 MB or less
- File extension must be one of [".png", ".jpg", ".jpeg", ".heif", "tif", ".tiff"]
Drag and drop and uploaded images are now also deduplicated.
This was hardcoded into `isAdmin` for some reason. It also seems that the
property isn't actually used anywhere in the profile popup, so we might
as well get rid off it.
The `communityProfilePopup` relies on the currently `activeCommunity` to
get its data. Unfortunately, once read, even when `chatsModel.setActiveCommunity()`
is called which triggers `activeCommunityChanged`, the data in the popup
won't be updated. The next time one would open a community profile page,
it'd have the data that was previously received from the model.
This commit ensures that the popup is hydrated with the most recent data
by explicitly updating its properties right before it's opened.
Prior to this commit there was a scenario where the application would
crash due a memory bug when attempting to (re)join a community.
The scenario is as follows:
1. User creates or has been invited to community with `ON_REQUEST` permissions
2. User leaves community
3. User decides to rejoin, so she selects the community she's been part
of and hits the "Join" button
At this point Status Desktop would send a new `RequestToJoin` request, as the
community has a corresponding permissions setting.
This would then result in an `already a member` error in status-go, because
status-go checks whether the requestee is already part of the members list of
the community. The error isn't handled inside Status Desktop which causes
a crash because we're trying to access data in memory that doesn't exist.
Why is this happening?
While this might be unexpected, when leaving a community (as done on step 2 of
the mentioned scenario), users don't actually lose membership but simply
"unsubscribe" from all channels in the community in question and their `joined`
flag is set to `false`.
From that point on, re-joininng a community is done by sending a `JoinCommunity`
request (instead of `RequestToJoin`), which will then set the `joined` flag to
`true` and doesn't actually check the membership in the database.
This commit ensures we're calling the right API by checking whether not only
whether the community is needs `ON _REQUEST` permissions, but also whether the
user isn't already a member of it.
Fixes#2017
In https://github.com/status-im/status-desktop/commit/a90a30af1 we've introduced the functionality to import
communities through the UI via a community private key.
That private key is being validated before it gets imported.
For some reason, validation has been removed in another refactor
later on in https://github.com/status-im/status-desktop/commit/534cb23e1, rendering the import
functionality broken.
This commit re-introduces the `validate()` method to make importing
communities work again.
Prior to this commit, communities without an image would render invisible
in the navigation bar of the application. To avoid this, we're now falling
back to our StatusLetterIdenticon component, which renders the first letter
of the community name with the color of the community.
When a user is part of a community, write access to any channel of
that community is granted. When the permission allows for it, a community's
channel `canPost` property is `true`, which should be relied on to
render the necessary component for writing into a channel.
This commit makes sure community members with proper access get the
chat input rendered so they can write to channels.
Fixes#1985
Very similar to #1986, we're trying to access the `activeCommunity`
property on the `chatsModel` object, which doesn't have such a property
anymore every since we've moved communities into its own view.
This causes errors when trying to create channels.
This commit fixes this bug by ensuring `activeCommunity` is accessed
from `chatsModel.communities` instead.
When the communities code was moved into its own view in https://github.com/status-im/status-desktop/commit/b38d1df59
it broke the functionality to join communities again.
Qt complains that the Nim API in use `chatsModel.communities.joinCommunity`
expects two parameters, when it's call with just one.
This is unexpected because the API in question set a default value
for its second parameter.
To make this work again, we have to make sure the `setActive`
parameter is supplied every time we call the API from
within QML.
Also, worth noting that this is not the first time we're running into
a scenario like this.
Turns out in https://github.com/status-im/status-desktop/commit/81bb7fcc6 we've introduced a regression where
leaving a communities isn't possible anymore because we're trying
to call an API that doesn't exist on the `chatsModel`.
This commit fixes it by ensuring the API is called from `chatsModel.communities`.
Updated community popup menu btn style. Fixes#1961
Updated community popup menu btn style. Fixes#1961
Updated community popup menu btn style. Fixes#1961
Updated community popup menu btn style. Fixes#1961
For an unknown reason, when the `chatLogView` ListView uses
a `verticalLayoutDirection: BottomToTop`, it prevents the application
from successfully rendering during login and crashes.
From debugging this, we know that this only happens when the above
condition applies *and* when a `DelegateModel` is used.
The delegate doesn't even need proper data, it application would still
crash.
We found out that the crash can be avoided when another `ListView` exists
in this component (however it's unclear why).
For now this commit adds such a placeholder `ListView` until it
we know more about what's going on.
In some cases inside of 1-on-1 chats, the fake messages added to
the beginning of the message list, wouldn't determine the correct
username of the contact in question.
This commit explicitly calls `chatsModel.userNameOrAlias()` instead
of relying on `activeChannel.name` which tries to do the same.
This commit adds a menu item to the message context menu to
copy links that may exist inside of a message.
There are three possible scenarios:
1. There's no link in the message, which causes the menu to not
render the dedicated menu item at all
2. There's one link in the message, which renders an additional
`Action` with a copy-to-clipboard functionality
3. There are multiple links in a single message. This adds a
nested `PopupMenu` in the existing menu with menu items for each
link extracted from the message
To make this work there were some changes in the `PopupMenu` component
needed, as it wasn't take the sub menu's `enabled` state into account
properly. This makde it always render nested menus even when they
should've been invisible.
Closes: #1733
This commit introduces the new design and behaviour of the modal
that opens up when starting a new 1-on-1 chat.
Main changes include:
- New search UI/UX functionality of users and ENS resolutions
- Composed view of existing contacts and contacts to be searched
- Ability to add contacts from within the modal
Closes: #1747
This was missing in one of our previous PRs and causes the
channel context menu to not function properly e.g. when deleting
chats, it currently always deletes the first chat in the channel list
instead of the active channel.
There's a bug in the profile popup where we're calling an API that
actually doesn't exist. This commit fixes it by calling into the
correct `profileModel` member, to make unblocking users work.
There are some inconcistencies in the application when it comes to
button UI elements because we're using `StatusButton` in some places,
in other we use `StyledButton`. The latter is the original
component we've created when we started out building Status
Desktop, but is planned to be removed entirely in favour of
`StatusButton`.
This commit replaces the usages of `StyledButton` with `StatusButton`
There are some places in the application where a custom round
button has been implemented, which essentially can be realized
using our `StatusRoundButton`. This commit addresses those cases.
redesigns the compact mode to have a nice hover, easier replying and adding reactions and more
Missing parts are aligning chat command, images and unfurlings, redesigning mentions and the channel list and also trying to find a way to re-enable link hovers in the text
This commit does a bunch of things:
- First and foremost, it removes the active channel dependency.
This is needed to have it operate on the correct channel object,
without forcing us to change the active channel (e.g. right-clicking
on a channel item that's not active, will make it active eventually)
- To make that work, this commit changes the `ChannelContextMenu`
to receive a `ChatItemView`, so it can be used for things like determining
what menu options are shown, what members are in a group, whether
someone is admin of a group etc.
- This also required a new `QtProperty` called `contextChannel`.
The reason this is required, is because in some cases, like receiving
members count of groups, we need a complete `ChatItemView` object
as we don't have access to certain APIs otherwise.
- Unfortunately, we can't pass down `activeChannel` every where for that
because sometimes the context menu should not actually operate on
the active channel.
Fixes: #1755
This commit introduces a new `ChannelContextMenu` component that can be reused
in different places, such as the channel list, as well as the chat bar.
At the moment we use two different pop up menus that also show two different
set of menu options. By using `ChanelContextMenu` in both of these places,
we get the same menu and same experience.
Closes#1711
fixes#935
A bug occurs when someone requests a large amount of funds from you since the gas estimation will fail and there isn't a way of handling errors in the source yet.
This PR handles the error appropriatley for both `estimateGas` and `estimateTokenGas` where the response is only converted from hex to int if the RPC call was successful. Otherwise return the error message as the response and let the UI decide how to display it.
Currently the error for gas estimation in transaction bubbles is displayed in a popup however, ive come to realize that 2 popups open instead of one. This is a new bug of which I can't pinpoint the root cause at the moment and have opted to file a separate issue for it.
This commit makes reactions in the status timeline work.
There are two things prior to this commit that are broken:
1. The logic that opens the reaction context menu always expects
and instance of `chatsView` because it tries to calculate a users
nickname. Such an instance isn't always available in that context, so
the nickname logic has been moved to `appMain` for now, removing that
dependency and therefore making it work in both, the chat view as well
as the status view.
2. While 1) makes the context menu work, it turns out that adding and
removing reactions inside the status timeline is still not working.
The reason for that is, that the reactions component maintains its own
`messageList`, which isn't aware of the fact that reactions for messages
coming from chats of `ChatType.Profile`, need to go into a dedicated
message list for `ChatType.Timeline`.
In other words, reactions are sent and removed from message in messagelists
that don't actually exist.
This commit fixes both of these things by ensuring the message lists
maintained by reactions are timeline aware. Also ensuring updates are
done correctly.
Prior to this commit, the function was expected on a `chatView` QML object.
This has worked out so far because the places where the API is used were always
living inside `ChatLayout`.
With the new timeline however, this is no longer the case so we have to make sure
that the API is available to other views as well.
This commit introduces some `MouseArea`s so components inside the
`StatusUpdate` component cancel it out by having a higher `z`.
Also, in some cases we need to conditionally set the `root.hovered` property
to ensure the values get inverted correctly, otherwise it causes undesired
flicker effects.
Fixes#1377.
Fixes#1479.
Two sites have been added to the whitelist: giphy.com and tenor.com.
`imageUrls` in its entirety has been removed and instead all links are being handle through the message `linkUrls`. This prevents double-handling of urls that may or may not be images.
The logic to automatically show links previews works like this:
1. If the setting "display chat images" is enabled, all links that *contain* ".png", ".jpg", ".jpeg", ".svg", ".gif" will be automatically shown. If the URL doesn't contain the extension, we are not downloading it. This was meant to be somewhat of a security compromise as we do not want to download each and every link posted in a message just to find out its true content type.
2. If the above setting is *disabled*, then we follow the whitelist settings for tenor and giphy. This allows us to preview gifs that do not have a file extension in their url.
feat: bump status-go to the commit that supports the new whitelist (https://github.com/status-im/status-go/pull/2094), and also lets us get link preview data from urls in the whitelist. NOTE: this commit was branched off status-go `develop`, so once it is merged, and we update this PR to the new commit, we will effectively be getting status-go develop changes. We *could* base that status-go PR off of master if it makes things easier.
fix: height on settings update issue
feat: move date/time of message below links
fix: layout issues when changing setting `neverAskAboutUnfurlingAgain`
feat: Add MessageBorder component to aid in showing rounded corners with different radius
This is needed when accessing the context menu from the timeline status updates.
Previously, it'd only change the active channel because it assumed the user is already
in the chat view. This is no longer the case when in timeline view, so we need to make sure
we first navigate to the chat view.
YouTube link unfurling was not working for a couple reasons.
There were two main parts fixed:
1. QML context for messages pertaining to linkUrls and imageUrls was changed from implicit to explicit. By this, I mean that any time we referenced linkUrls/imageUrls, we were relying on the knowledge that those values would be populated by some parent context several levels up. Now, we are referring to properties that have been explicitly defined on the components. This offers the ability to reuse components, and makes reading the code and debugging much easier.
2. Error handling has been added to getting link preview data. An unhandled "error" was thrown each time a link that wasn't whitelisted was passed in, causing the app to crash. For example, when a link to a tenor gif was posted in the chat, that URL was not whitelisted, causing the app to crash.
In timeline status update messages we want to render the ENS name next to a
local nickname in case it exists. This commit extends the `UsernameLabel` to do
just that.
Closes#1488
StatusChatInput was relying on the suggestions ListModel, even though there was
no guarantee that it would exist. This is more apparent when using the component
in different context (e.g. Timeline/Status Updates). QML will throw a reference
error in this case.
`StatusChatInput` ideally shouldn't rely on chatsModel and other global
objects at all. Also, when using the component in different places, it can cause
accidental sending of message when testing the component (because all the logic is already
wired up)
We've introduced a bug in https://github.com/status-im/nim-status-client/commit/8fd28dfa where a
non-existing `UnblockContactConfirmationDialog` usage was added.
This commit changes it to be a standard `ConfirmationDialog` to make the application compile
again.
This is done because there's gonna be a case where this connection causes errors
because the component expects `NormalMessage` to be a parent of this component.
When used in future StatusUpdates, there's no `NormalMessage`. Unfortunately,
disabling the connection based on a condition doesn't remove the error, so we have
to move this code out entirely
This PR is a response to @emizzle's suggested change in PR #1431 . It checks if a user is blocked before exposing certain functionality to the user in a Profile popup. The new unblock button also has a fail-safe unblock confirmation popup
disable the chat input if 1-on-1 chat recipient has been blocked.
fix#898
The segmentation fault occured because the RPC response returned json with an error message as oppossed to the usual data required to update the chat. Since the section of the code didn't handle this error message it caused the app to crash. I've handled this error to show an error alert box by emitting a event
Add keyboard shortcuts according to https://notes.status.im/02cfVf1KQLeQU2SqrIi9tw
fix: update chat message bubbles
- Align emojis to middle of text
- Add line-height as per design
- Properly support RTL languages (right-aligned) and LTR languages (left-aligned)
- Remove unneeded non-breaking space at the beginning of current user messages
- Properly support markdown for bold, strikethrough, and italic
- Fix text being removed when in between strikethrough markdown (~~)
fix: emoji resolution update for high resolution monitors
- Emojis now use the 72x72 original set, but are down-scaled to 20x20 (in chat bubbles) or 22x22 in other places, effectively tripling their pixel density
feat: handle new lines in blockquote
Handle new lines in blockquote so that messages display correctly.
Also, add functionality when a new line is entered in to the chat input, if it's inside a blockquote, a new ">" will be added automatically. This is also handled when backspace is entered.
feat: update xss to support full qt html4 table and table-cell attributes
The transaction component's `reset` functionality was meant ot reset a form when the modal was closed. It was difficult to manage and added extra overhead for each additional transaction modal created.
Instead of using reset functions, we can use Loaders to load and destroy the modal's as they are opened and closed. We do not need to keep them in memory and then also reset their functions. It creates a smaller memory footprint to destroy the object and reload on open.
feat: load gas prediction prices asynchronously
We were previously displaying an address in the "to" field for TransactionPreview. Instead, this is meant to be a contact view.
- Fix ContactSelector to trigger selectedContactChanged
- Fix RecipientSelector > ContactSelector to trigger resolveEns from outside call to prevent infinite loop from the above fix
- Add alias to pre-selected contact for the Contact view of TransactionPreview
- Add option to change debounce delay so that when values are pre-selected (readonly), there is no delay before resolution.
- Fix missing tx data param in walletModel.estimateGas
BalanceValidator and GasValidator have been moved outside of the TransactionPreview component, because there are some transaction modals that may not need them to be baked in to TransactionPreview. It is useful to have these components on the tx preview step only when we start the process on the preview step.
Fixes#1202
I had to revert the loader changes that switched from/to as it was causes quite a lot of logistical complexity. Instead of using Loaders, we are setting the type of account (account or contact), and it is being displayed appropriately. There is a very slight deviation from the design, however it is consistent with the design for other transaction previews.
feat: add BalanceValidator
Shows an exclamation icon next to the "from" account when the balance for the requested asset is too low.
This is useful when the user starts the transaction wizard on the TransactionPreview step.
fix: SignTransactionModal - set default focused account when none is found
refactor: move token lookup from QML to nim in the toMessage procedure.
fix: 1:1 tx requests - handle case where token contract is not found (ie sending SNT from mainnet and receiving message on testnet)
feat: error checking for building a token transaction
feat: TransactionPreview - add a validation check that disallows continuation if the selected "from" account has insufficient funds
I noticed that the 1:1 chat commands were not able to send token transactions due to "intrinsic gas too low" error. I quickly realised there there were a few components missing, which have been fixed.
*feat: update the 1:1 chat commands transaction modal to allow editing of the from account and network fee*
The TransactionStackGroup was updated slightly to allow manual control of back/next actions.
Fixes#870.
*fix: Create distinct modal transaction actions*
Previously, adding `Connection`s for the `walletModel.transactionWasSent` signal in different dialogs would cause the signal to be handled in the wrong dialog. The solution was to pass a `uuid` from the requesting dialog, and include the `uuid` in the response, so that only requests that were requested from the dialog would be handled.
*fix: update 1:1 translations*
All the translations were not being translated for me. I noticed that they did not exist in the `.ts` translation files either.
Sale Djenic
Anthony Laibe
Alexandra Betouni
Khushboo Mehta
Pascal Precht
Andrei Smirnov
B.Melnik
Alexandra Betouni
Richard Ramos
Jonathan Rainville
Eric Mastro
Iuri Matias
--replace-all
ace-smart
staked-smart-ace
Malik Al-Jabr
Michael Bradley, Jr