Closing #9967
When Holdings dropdown is open, activate focus to searcher in assets and collectibles. Changes focus to ENS input in case ENS tab is active.
In Holdings dropdown, when ENS tab is active and Add button is enabled, pressing enter key should behave same than clicking on the button itself.
In Holdings dropdown, when one asset or collectible has been selected, activate focus in the amount input, then when Add button is enabled, pressing enter key should behave same than clicking on the button itself.
Also add handlers to JoinCommunityView for requesting and cancelling
requests. These will be extended in follow up commits to included
authentication modals
TLDR;
- all links visible in settings/popup
- persistent order of items
- drag'n'drop to reorder
- editing/deleting in a new popup
- several links of the same type
Needs changes in nimqml (to expose QAIM::begin/endMoveRows), in
DOtherSide (to expose those to NIM), in status-go (to preserve the links
order and fully save them to DB)
Fixes#9777
Introduce TokenItem struct.
TokenModel keeps TokenItems.
TokenItem keeps CommunityTokenDto and chain details.
Chain details are taken from networks service.
Fix#9867
- It has been added a `StackView` in main mint tokens panel to easily switch back / forward between views.
- It has been created a SQ component `StackViewStatesManager` that allows a managing together a stackview and states.
- Updated `HoldingsDropdown` to use new stack states component
- Refactored minting components store access, since some panels were accessing stores directly. Now `CommunitySettingsView` is the single place where stores are accessed.
- Renamed store `CommunitesStore` to `CommunityTokensStore` for handling minting / airdrop actions / request models.
- `NetworkFilter` refactored to prevent direct access to store inside the component.
Closes#9663
This does a few things:
- It integrates with the latest `CommunityTokensMetadata` to access
community specific ERC721 token
- It changes `ChatLayout` such that it conditionally loads either
`ChatView` or `JoinCommunityView`. `JoinCommunityView` has been
specifically designed for token-gated communities
Here's what works (in terms of token permissions):
1. If a community has token permissions and the the current users is not
a member of that community, we show `JoinCommunityView` instead of
`ChatView`
2. Any community token permissions of type "Become member" are listed in
the `JoinCommunityView`
3. There are different types of token critera a permission can have:
ERC20 token, ERC721 token, or ENS (which is also ERC721 but we have
a type for that nonetheless)
Only ERC20 token balances are checked for the known wallet accounts.
This happens every time the known token list has been updated (every
10 min atm).
We still need to add balance checks for any ERC721 tokens and ENS.
4. If token permissions are created, updated or deleted by the community
owner, the `JoinCommunityView` will update in real-time.
You'll also notice that the `Reveal my address and request access`
button will be enabled if any of the token permissions are fulfilled
(only ERC20 at the time being). Clicking that button will not yet send
a request.
This will be done in the next step as part of https://github.com/status-im/status-desktop/issues/9761
- the goal of this PR is to get some bsais UI building blocks done for
the followup PRs
- the order of showcase tabs now is:
Communities/Accounts/Collectibles/Assets
- there will be further changes to accomodate for different types of
backend models as those get developed (for other users' profiles)
Fixes#9664
So far CP components (views, panels) were accessing stores directly.
Now `CommunitySettingsView` is a single place where stores are accessed.
Other components no longer depend on stores.
Moreover:
- dedicated store `PermissionsStore` created for handling permissions
in a single, separated place
- storybook pages fixed
Closes: #9784
Prior to this change `ChatLayout` exposed `chatView` which let other
components access it, its properties and signals.
This is problematic as we need to be able to swap out the `ChatView`
with the `JoinCommunityView` for token gated communities, in which case
there won't be an instance of `chatView`.
This commit ensures that we rely purely on inputs and outputs of the
component, without exposing the component instance itself.
- Added navigation between pages.
- Added main layout and properties (some backend integration still pending).
- Added holders model with mocked data.
- Added mint tokens footer component.
Closes#8734 and #8737
Community permissions model refers to channels by id instead of
taking/serving all details. UI fetches necessary metadata form
appropriate channels model.
Closes: #9588
This commit is the first of implementing community permissions.
**It is not implementing the complete feature**, rather does it
introduce the first pieces, such that we can get code reviewed and
merged before it grows too big.
To review these features, please make sure to
1. Enable wallet (Settings -> Advanced -> Wallet toggle)
2. Enable community permissions (Settings -> Advanced -> Community
Permissions toggle)
You'll have to restart the app after doing so.
The commit introduces the following:
**UI, API calls and view models to CRUD community permissions**
After creating a community, the user can go to the community
settings and create new token permissions. The user can also update
and delete existing permissions.
**Asset and collectible view models**
To create community token permissions, users have to select
the token criteria. This commit introduces the `assetsModel` for ERC20
tokens and `collectiblesModel` for `ERC721` tokens.
The latter only supports custom minted community tokens at this point.
**This commit requires:** https://github.com/status-im/status-go/pull/3207
Model with community tokens was moved to section_item - every section has its own model.
Every deployed smart contract is saved to database with "In Progress" state.
The app listenes to deployed transaction and updates contract state in database to "Failed" or "Deployed".
Corresponding model is updated.
Issue #9233
The chat title/subtitle no longer bleed into the action buttons
- handle long texts in chat description, elide them and show the whole
text in a tooltip
- minor UI fixes in ChatHeaderContentView and StatusToolBar
- adjust Sandbox' Controls page
Fixes#9583
- Component parametrised and renamed to `CommunityWelcomeSettingsView`. It will be the base class for some of the community settings functionalities.
- Updated `CommunityPermissionsSettingsPanel` to use the new welcome screen class.
... to help align with original design intent
- dropped date breaks before msg groups
- show full date/timestamp in the msg header
- floating "Unpin" button on mouse hover
- no padding/spacing between messages
- some smaller code cleanups and dead code removals
Fixes#9396
LinksMessageView component will receive the urls from nim as string and it will only forward the string to getLinkPreviewData slot implemented in nim together with some settings (supported img extensions and unfurling preferences)
On nim side the urls will be parsed and validated using the settings received from qml.
Images are now validated before sending them to the UI using the HEAD request.
Add Community Tokens testing UI with minting button, enabled by a Advanced Settings toggle.
Add minting module,view and needed models.
Add community_tokens service to call collectibles smart contract functions.
Issue #8921
... doesn't work in the community section
Extract the `Chat.RootStore` as a toplevel/shared property and pass it
down to ChatLayouts, instead of cross referencing it between different
components. This was also problematic since the ChatLayouts now live
inside a Loader, so it's more appropriate to refer to the
`Chat.RootStore` directly, instead of
`personalChatLayoutLoader.item.rootStore`, since the
`personalChatLayoutLoader.item` might not be visible (due to it being
inside a Loader and a StackLayout) or it might even be a different
component (`loadingStateComponent` or `errorStateComponent`).
This also caused similar problems for other components, such as
ActivityCenterPopup or StatusStickersPopup.
Fixes#9513
Created new view to be used when a community needs permissions to join:
- Left panel blur layout created.
- Header panel blur layout created.
- Central panel blur layout created.
- Join permission overlay panel integrated.
Closes#9267
- all remaining global popup components moved into a separate Popups
entity
- removed some static objects from the Global singleton (appMain,
pinnedMessagesPopup, communityProfilePopup, sounds); rationale:
singletons should not contain any state
- fixed support for popups in storybook
- fixed some warnings (most of them broke the popups in one way or the other)
Fixing QML Connections warnings due to deprecated onFoo handlers. Now we're using function onFoo(params).
Fixing QML compilation error due to js filename format.
Fixing cyclic dependencies between qml components.
- Updated initial dropdown view for assets and collectibles to directly show the list of corresponding elements.
- Updated assets and collectibles panel when an item is selected, according to new design.
- Updated collectibles logic when amount is 1.
- Added collectibles group item as part of the selectable's options.
- Updated `storybook` according to new changes.
- Created reusable `TokenItem` component.
- Updated `CommunityPermissionsHelpers`.
Closes#9043
Provide the needed data from the nim model directly to the delegate. This way whenever a delegate needs to display the data it doesn't need to reach the backend.
perf(chatScroll): Fix comments on Avoid calling the backend on delegate creation/binding
perf(chatScroll): Avoid calling the backend on delegate creation/binding - add TODO comment on senderColorHash default
perf(chatScroll): merge quotedMessageAuthor details
perf(chatScroll): Fix nim tests
perf(chatScroll): Fix merge error - messages_model.nim
- Logic related to operators removed.
- Dropdown `and/or` removed.
- Updated `PermissionItem` to display only the tag and not the operator.
- Updated `storybook` according to new changes.
Fixes#8500
Adds the action to copy the right-clicked message's text.
It copies the unparsed text (no html).
For that, I had to add it in the MessageItem and expose it in the model.
I also fixed the copy MessageId action that didn't show + didn't work even if it would have shown.
Plus some small cleanups.
Adds `deleted` to the QuotedMessage object so that on the frontend, we can show "Delete message" only when we know the message was deleted.
Otherwise, when we don't know the quoted message, we show "Unknown message [...]"
Exposed new properties in `SettingsDirtyToastMessage` to customise buttons texts.
Exposed new properties in `SettingsPageLayout` to customise dirty toast buttons texts.
Fixes#9046
- make the left/right padding and internal spacing consistent with the
Figma design
- the padding itself got broken by a behavior-incompatible change introduced in
17aaec2d53 (diff-451194c72ab50ea2586b6f1d6521b81d9a93206069788117326788be28b638fd);
this change is however correct but we can no longer rely on the
implementation detail that used to "reset" the left/right padding to its
default value when we set `leftPadding: 0`
Fixes#8910
- Updated `StatusItemSelector` API to allow other asset sizes and leftPadding.
- Applied different asset size in holdings tags in `NewPermissionView` to fit the design.
- Changed `StatusListItemTag` API. Now it is based on `Control` component.
- Updated needed qml files to fit with the new `StatusListItemTag` API.
- Added `elide` property in `Text` component to better visualise the content when a specific width is forced.
feat(CommunitySettings): Implement UI for`edit`, `duplicate` and `remove` actions in community permissions page
- Enabled `duplicate` action (mocked).
- Enabled `delete` action (mocked) and added / updated navigations in case all permissions are removed.
- Added delete confirmation popup.
- Enabled `edit` action (mocked) where changes are detected and the `dirty changes toast` appears properly.
Closes#8581
Fixes#7643
This adds the backend to resend. It then hooks the button to it.
This also adds a visual state for when we are sending. This gives a good indication that a message was sent.
Added property `previousPageName` into `SettingsPageLayout`.
Added needed slots in `CommunitySettingsView` to get `previousPageName` property changes and display the correct string.
Renamed `updateState` method to `navigateBack` to have a better accurate name.
Fixes#8455
- Created page and added editor for specific page.
- Created needed mocked models.
- Added background in permission related pages to ensure correct dark mode visualization.
- Added `CommunityPermissionsSettingsPanel`.
- Created panel item editor and basic panel editor layout for `CommunityPermissionsSettingsPanelPage`. Still not linked to a model.
- Added mocked data for collectibles and tokens.
- Created `ChannelsModel` mocked data.
- Added edit / duplicate / remove signals logs.
- Created `CommunityPermissionsView` and integrated into the flow.
- Created `PermissionItem` component.
- Added `holdingsListModel`, `permissionsObjectModel` and `channelsListModel` flows with mocked data.
- Added `isPrivate` permission property.
- Added button header in `SettingsPageLayout`
- Added signals/methods for edit/duplicate/remove permissions
- Created new file `OperatorsUtils.qml` specific for `Operators`
Status allows for importing communities via their private keys.
There's a requested feature that users should be able to import a community via
its public key as well.
This will behave differently as private keys won't give users ownership
of the communities. When importing via a (compressed) public key, Status
will try to fetch information about the community from the network. If it
finds such information, it'll load it into the app and create
a communitiy view from which users can then request access.
If it can't find a community or community information in the network,
the user will get a dedicated error message.
This commit also refactors the `ImportCommunityPopup` such that it uses
`StatusDialog` and updates the copy accordingly since importing via
public key is now possible as well.
Closes#8339
- when calling `Utils.getColorHashAsJson()` we don't actually need to
issue ID verification requests at all and there might be situations when
we know beforehand that we don't need the ENS verification either
- change these helper functions' syntax and do early returns in that case
- in MessageContextMenuView, the "contact details" were duplicated, so
remove one
- remove dead code, fix some warnings
This adds support for receiving copied images from the clipboard
and pasting it into the chat input.
After pasting, chat input will recognize the image and render a preview
similar to how it would do it when selecting images via the file dialog.
**Also important to note**:
At the time of this PR, it seems that desktop only supports sending
jpegs to status-go. I'm not sure if this was deliberately done this way
because the protocol says it supports jpg, png, webp and gif.
Because of this, pasting for example pngs will work, however
transparency will be lost (which is also most likely the cause of #8820)
This PR operates on that assumption. So while it adds support for
copy/pasting images, it does not address the lack of file type support.
Closes#3395
similar to the profile dialog, we need to add an opacity mask in front of
the contentItem to ensure the rounded corners at the bottom are preserved
when we have no margins/padding inside the popup
Fixes#7759
Applied the following solution agreed with design team: When a user types their message, hitting enter, or pressing send, should automatically create the chat and send the message, removing the 'To' input field and Confirm/Reject buttons (that means, directly navigating to the new created chat).
Fixes#7706
When typing at non-end position (in channel name filed) cursor
is no longer jumping to the end. Additionally binding loop
on "contentWidth" is fixed.
Closes: #7805
- user is able to see community without being a member
- invitation bubble always display "Go to Community"
- join community buttons are displayed in community view
main part of: #7072
- 'Settings' title removed and it is shown instead the Community name and number of members
- Overview icon updated according to the design
- Icon of members size updated according to the design
- The spaces between edges of the Secondary Nav tab and items updated according to the design
Fixes#6785
This adds the UI plus all necessary models and signal handling to render
discord import progress in the desktop application.
It also introduces message handling for discord chat message types.
Requires status-im/status-go#2826 to function
Co-authored with @caybro
- remove the extra spinner (ok'ed by John and Benj)
- use the more modern StatusIcon, w/o the unconditional ColorOverlay
- some minor cleanup
Closes: #7645
Direct binding was causing problems with height calculation in some
environments (qt 5.15) and lack of binding in other (5.14). This is
a solution which seems to work in both cases.
Closes: #7703
The create a group chat related objects have been updated according to new qml changes.
Now these tests are working (if they don't work it is bc of mailserver reliability).
Actually this is not a signing transaction, but rather authenticating logged in
user when he wants to send a transaction. An authentication is done by entering
password(regular user) or pin(keycard user).
A real signing transaction feature will be (hopefully) added in a near future where
we're going to sign a transaction on a keycard which corresponds to a certain
account, a user wants to send a transaction from.
To sum up... this change just removes password from the send modal and introduces
`Authenticate` flow instead.
Fixes: #7510
- don't display identicon rings for contacts with an ENS name
- prefer the at-form (@foo-user) whenever possible, and don't display their
username or pubkey unless they are locally given a nickname
- show compressed keys everywhere instead of the regular ones
Fixes: #7319Fixes: #7515
This was never implemented, eventhough a similar approach is used with
the global AppSearch. Expose the method `scrollToMessage(messageId)` so
that it can be called from QML directly.
Fixes#7375
- fix spacing/padding/margins
- remove MouseAreas, they block hovering the buttons (not needed any
longer thanks to our new QQC2 buttons)
- some minor cleanups
Fixes#7366
- align the dialog to design
- fix radio button logic (it was possible to uncheck a mutually exclusive
checked button eventhough it's inside the button group, leaving the Unpin
button in an undefined state)
- port to StatusDialog and layouts, dropping a lot of needless code
- remove dead code for passing around the `property Component
pinnedMessagesListPopupComponent`; the popup is being invoked via
`Global.openPopup()`
Fixes#7316Fixes#7315
- export a non-blurry browsers image from Figma
- bring the whole UI closer to the design
- sllight refactor to user StatusDialog and layouts
Fixes#7169
Replace Contact component with StatusMemberListItem.
Add missing Nim functions to fill models with onlineStatus.
Adjust components paddings to match design.
Fixes#6985
This adds a feature flag for the discord import tool so we can start
landing individual pieces of the feature without it being fully
implemented.
It also introduces the modal chooser for creating new communities but
it doesn't do anything more than that, as of this commit
Closes#6843
Remove ValidationMode.Always for StatusInputs because by default they
are invalid and validate input when dirty
Remove condition from errorMessage of BackupSeedStepBase as not needed.
Fixes#6825
Requires https://github.com/status-im/StatusQ/pull/858
BREAKING CHANGE: StatusInputs are invalid by default and validate when
dirty.
`tst_chatFlow`:
- Commented out bc of `mailserver` issues and then weak.
- Added basic test scenario for sending a mention in a public chat with needed validations.
- Added basic test scenario to check a mention cannot be done if it is a non existing user.
`StatusChatScreen` updates:
- Updated join room method to validate the chat is loaded.
- Added methods for doing and verifying a mention.
`SquishDriver` updates:
- Added support in `SquishDriver` to click into a link in a text or label component.
- Minor function renames.
Closes#6879
- Added functionality as experimental advanced view button
feat(CommunitySettings / Permissions): Added welcome page
- Enabled new permissions tab.
- Created welcome page layout.
- Added permissions welcome image.
- Fixed top margin content in `SettingsPanelLayout` to fit designs.
Closes#6036
feat(CommunitySettings/Permissions): Created `new permission` page
- Added `new permission` page.
- Created first card layout.
- Added navigation between `welcome` and `newPermission` views.
- Improvements in base community settings layout pages.
Closes#6037
feat(CommunitySettings/Permissions): `Who holds` tokens dropdown component creation and integration
- Tokens dropdown component creation: main view, operators view and extended view.
- Logic to add new token and change operator.
Part of #6038
Use new status-go function to update group chat details.
Changes in RenameGroupPopup to handle choosing colors and images.
Changes in EditCroppedImagePanel to handle background component.
Issue #5982
- fix initial input focus
- fix texts according to design
- fix TAB keys between the input fields
- fix input fields text and placeholders alignment
- make the community options checkboxes clickable
- adjust margins/spacing according to design
Closes: #6724
Alex Jbanca
Noelia
Jonathan Rainville
Michał Cieślak
mprakhov
Pascal Precht
Lukáš Tinkl
Boris Melnik
Michal Iskierko
Magnus
Alexandra Betouni
Alexandra Betouni
MishkaRogachev
Sale Djenic
Richard Ramos
Igor Sirotin
Dario Gabriel Lipicar
Patryk Osmaczko
Khushboo Mehta
Pascal Precht
Michał
PavelS
Stefan