This commit introduces a new `ChannelContextMenu` component that can be reused
in different places, such as the channel list, as well as the chat bar.
At the moment we use two different pop up menus that also show two different
set of menu options. By using `ChanelContextMenu` in both of these places,
we get the same menu and same experience.
Closes#1711
This is a new form control component to select colors for wallet
accounts. It will replace the currently used `ColorSelect` in the
Status Desktop application so it aligns with the new designs.
Closes#1497
This introduces a new component to render Addresses that can be
expanded as well as copied using `CopyToClipBoardButton`.
While there's already an `Address` component that allows for expansion,
it doesn't give us control over it's look and feel and, should rather
be a `Button` anyways.
There's also cases in the application where we render a collapsed address
and don't allow for expanding it. In such cases, we might not want/need
a button at all.
Might make sense to introduce a separate address component that just shows
a collapsed address without any behaviour, which can then be used inside
`StatusExapandableAddress`.
Closes#1633
fixes#935
A bug occurs when someone requests a large amount of funds from you since the gas estimation will fail and there isn't a way of handling errors in the source yet.
This PR handles the error appropriatley for both `estimateGas` and `estimateTokenGas` where the response is only converted from hex to int if the RPC call was successful. Otherwise return the error message as the response and let the UI decide how to display it.
Currently the error for gas estimation in transaction bubbles is displayed in a popup however, ive come to realize that 2 popups open instead of one. This is a new bug of which I can't pinpoint the root cause at the moment and have opted to file a separate issue for it.
Adding a contact through the Add Contact Modal isn't working because the
function being called to add a contact doesn't actually exist.
This was most likely a mistake as the change was just to call that function
in question from a different property.
This commit does exactly that.
Fixes#1660
Setting the default currency through the UI doesn't work because of a `MouseArea` that
is masking the an underlying `StatusRadioButton` which will tricker the default currency
change.
This commit enhances the `MouseArea` to trigger the default currency change and it
also ensures the UI is responding accordingly. Namely that the new default currency
is correcly selected in the list of currencies.
There's also a little change in the background hover color so it works well across
light and dark themes.
Fixes#1632
This commit does a couple of things:
- It changes a label in the wallet menu from "Add/remove Token" to "Manage Assets"
as it has been designed
- It changes the asset list so a hover state could be introduced. Previously there
was no visual effect or response to mouse hover on asset items
- It improves usability of the asset list by making an entire asset item
clickable to toggle the asset in the wallet. This was not possible before.
Users had to click the checkbox achieve this effect
Closes#1631
This commit makes reactions in the status timeline work.
There are two things prior to this commit that are broken:
1. The logic that opens the reaction context menu always expects
and instance of `chatsView` because it tries to calculate a users
nickname. Such an instance isn't always available in that context, so
the nickname logic has been moved to `appMain` for now, removing that
dependency and therefore making it work in both, the chat view as well
as the status view.
2. While 1) makes the context menu work, it turns out that adding and
removing reactions inside the status timeline is still not working.
The reason for that is, that the reactions component maintains its own
`messageList`, which isn't aware of the fact that reactions for messages
coming from chats of `ChatType.Profile`, need to go into a dedicated
message list for `ChatType.Timeline`.
In other words, reactions are sent and removed from message in messagelists
that don't actually exist.
This commit fixes both of these things by ensuring the message lists
maintained by reactions are timeline aware. Also ensuring updates are
done correctly.
`StyledButton` is considered obsolete and by using `StatusButton` we're getting
the expected and correct look & feel of buttons by default.
Closes#1627
The contact list was taking the entire width of its surrounding element,
making it grow too wide to be usable (see #1589).
In fact, it's not following the designs made for this part of the application,
so this commit changes the max layout width to align with the intended
design and should also fix some of the usability issues mentioned in #1589Fixes#1589
The "more actions" button in the contacts list had some hard coded colors
for its hover effect which break the experience in dark mode.
This commit makes changes those so that they work universally.
Prior to this commit, the function was expected on a `chatView` QML object.
This has worked out so far because the places where the API is used were always
living inside `ChatLayout`.
With the new timeline however, this is no longer the case so we have to make sure
that the API is available to other views as well.
This commit introduces some `MouseArea`s so components inside the
`StatusUpdate` component cancel it out by having a higher `z`.
Also, in some cases we need to conditionally set the `root.hovered` property
to ensure the values get inverted correctly, otherwise it causes undesired
flicker effects.
Fixes#1377.
Fixes#1479.
Two sites have been added to the whitelist: giphy.com and tenor.com.
`imageUrls` in its entirety has been removed and instead all links are being handle through the message `linkUrls`. This prevents double-handling of urls that may or may not be images.
The logic to automatically show links previews works like this:
1. If the setting "display chat images" is enabled, all links that *contain* ".png", ".jpg", ".jpeg", ".svg", ".gif" will be automatically shown. If the URL doesn't contain the extension, we are not downloading it. This was meant to be somewhat of a security compromise as we do not want to download each and every link posted in a message just to find out its true content type.
2. If the above setting is *disabled*, then we follow the whitelist settings for tenor and giphy. This allows us to preview gifs that do not have a file extension in their url.
feat: bump status-go to the commit that supports the new whitelist (https://github.com/status-im/status-go/pull/2094), and also lets us get link preview data from urls in the whitelist. NOTE: this commit was branched off status-go `develop`, so once it is merged, and we update this PR to the new commit, we will effectively be getting status-go develop changes. We *could* base that status-go PR off of master if it makes things easier.
fix: height on settings update issue
feat: move date/time of message below links
fix: layout issues when changing setting `neverAskAboutUnfurlingAgain`
feat: Add MessageBorder component to aid in showing rounded corners with different radius
This is needed when accessing the context menu from the timeline status updates.
Previously, it'd only change the active channel because it assumed the user is already
in the chat view. This is no longer the case when in timeline view, so we need to make sure
we first navigate to the chat view.
YouTube link unfurling was not working for a couple reasons.
There were two main parts fixed:
1. QML context for messages pertaining to linkUrls and imageUrls was changed from implicit to explicit. By this, I mean that any time we referenced linkUrls/imageUrls, we were relying on the knowledge that those values would be populated by some parent context several levels up. Now, we are referring to properties that have been explicitly defined on the components. This offers the ability to reuse components, and makes reading the code and debugging much easier.
2. Error handling has been added to getting link preview data. An unhandled "error" was thrown each time a link that wasn't whitelisted was passed in, causing the app to crash. For example, when a link to a tenor gif was posted in the chat, that URL was not whitelisted, causing the app to crash.
In timeline status update messages we want to render the ENS name next to a
local nickname in case it exists. This commit extends the `UsernameLabel` to do
just that.
Closes#1488
StatusChatInput was relying on the suggestions ListModel, even though there was
no guarantee that it would exist. This is more apparent when using the component
in different context (e.g. Timeline/Status Updates). QML will throw a reference
error in this case.
`StatusChatInput` ideally shouldn't rely on chatsModel and other global
objects at all. Also, when using the component in different places, it can cause
accidental sending of message when testing the component (because all the logic is already
wired up)
We've introduced a bug in https://github.com/status-im/nim-status-client/commit/8fd28dfa where a
non-existing `UnblockContactConfirmationDialog` usage was added.
This commit changes it to be a standard `ConfirmationDialog` to make the application compile
again.
This is done because there's gonna be a case where this connection causes errors
because the component expects `NormalMessage` to be a parent of this component.
When used in future StatusUpdates, there's no `NormalMessage`. Unfortunately,
disabling the connection based on a condition doesn't remove the error, so we have
to move this code out entirely
This PR is a response to @emizzle's suggested change in PR #1431 . It checks if a user is blocked before exposing certain functionality to the user in a Profile popup. The new unblock button also has a fail-safe unblock confirmation popup
disable the chat input if 1-on-1 chat recipient has been blocked.
fix#898
The segmentation fault occured because the RPC response returned json with an error message as oppossed to the usual data required to update the chat. Since the section of the code didn't handle this error message it caused the app to crash. I've handled this error to show an error alert box by emitting a event
- Account color is used in list hightlight, separator and tabs
- Popup fields are cleared when opened
- Account color is randomized when popup is opened
- Show scrollbars in asset list if needed
- Show scrollbars in account list if needed
- Fix margin between assets
- Add symbol to asset amounts
- Stop scrolling at element bounds
Add keyboard shortcuts according to https://notes.status.im/02cfVf1KQLeQU2SqrIi9tw
fix: update chat message bubbles
- Align emojis to middle of text
- Add line-height as per design
- Properly support RTL languages (right-aligned) and LTR languages (left-aligned)
- Remove unneeded non-breaking space at the beginning of current user messages
- Properly support markdown for bold, strikethrough, and italic
- Fix text being removed when in between strikethrough markdown (~~)
fix: emoji resolution update for high resolution monitors
- Emojis now use the 72x72 original set, but are down-scaled to 20x20 (in chat bubbles) or 22x22 in other places, effectively tripling their pixel density
feat: handle new lines in blockquote
Handle new lines in blockquote so that messages display correctly.
Also, add functionality when a new line is entered in to the chat input, if it's inside a blockquote, a new ">" will be added automatically. This is also handled when backspace is entered.
feat: update xss to support full qt html4 table and table-cell attributes
fixes https://github.com/status-im/nim-status-client/issues/1232
This PR repurposes the DownloadView into a Loader component of a browser tab and is displayed when:
1. a new downloads tab is opened or
2. a new tab with the link status://downloads or finally when
3. the ShowAll button has been clicked.
You can open any number of Downloads tabs
When you open a new tab and type in status://downloads the title will remain as 'New Tab'
fix: add localization
The transaction component's `reset` functionality was meant ot reset a form when the modal was closed. It was difficult to manage and added extra overhead for each additional transaction modal created.
Instead of using reset functions, we can use Loaders to load and destroy the modal's as they are opened and closed. We do not need to keep them in memory and then also reset their functions. It creates a smaller memory footprint to destroy the object and reload on open.
feat: load gas prediction prices asynchronously
We were previously displaying an address in the "to" field for TransactionPreview. Instead, this is meant to be a contact view.
- Fix ContactSelector to trigger selectedContactChanged
- Fix RecipientSelector > ContactSelector to trigger resolveEns from outside call to prevent infinite loop from the above fix
- Add alias to pre-selected contact for the Contact view of TransactionPreview
- Add option to change debounce delay so that when values are pre-selected (readonly), there is no delay before resolution.
- Fix missing tx data param in walletModel.estimateGas
BalanceValidator and GasValidator have been moved outside of the TransactionPreview component, because there are some transaction modals that may not need them to be baked in to TransactionPreview. It is useful to have these components on the tx preview step only when we start the process on the preview step.
Fixes#1202
I had to revert the loader changes that switched from/to as it was causes quite a lot of logistical complexity. Instead of using Loaders, we are setting the type of account (account or contact), and it is being displayed appropriately. There is a very slight deviation from the design, however it is consistent with the design for other transaction previews.
feat: add BalanceValidator
Shows an exclamation icon next to the "from" account when the balance for the requested asset is too low.
This is useful when the user starts the transaction wizard on the TransactionPreview step.
fix: SignTransactionModal - set default focused account when none is found
refactor: move token lookup from QML to nim in the toMessage procedure.
fix: 1:1 tx requests - handle case where token contract is not found (ie sending SNT from mainnet and receiving message on testnet)
feat: error checking for building a token transaction
feat: TransactionPreview - add a validation check that disallows continuation if the selected "from" account has insufficient funds
I noticed that the 1:1 chat commands were not able to send token transactions due to "intrinsic gas too low" error. I quickly realised there there were a few components missing, which have been fixed.
*feat: update the 1:1 chat commands transaction modal to allow editing of the from account and network fee*
The TransactionStackGroup was updated slightly to allow manual control of back/next actions.
Fixes#870.
*fix: Create distinct modal transaction actions*
Previously, adding `Connection`s for the `walletModel.transactionWasSent` signal in different dialogs would cause the signal to be handled in the wrong dialog. The solution was to pass a `uuid` from the requesting dialog, and include the `uuid` in the response, so that only requests that were requested from the dialog would be handled.
*fix: update 1:1 translations*
All the translations were not being translated for me. I noticed that they did not exist in the `.ts` translation files either.
- Create privilege dialogs dynamically for each privilege requested
- Check if a privilege has been granted before to determine if dialog must be shown or not
- If dapp is allowed to use privilege, save it in the settings
- Changed WebView to WebEngineView
- Created a new controller/view for the web3 provider
- Created a private profile
- Created a channel for comms browser - qml
- If the count matches the required amount a tick will be included next the count
- The format is "✓ 12 words"
- This commit also fixes the text color when in dark in the wallet add new account modal
Fixes: #926.
Gas estimations were not being decoded correctly (indicated with "error getting gas price predictions" in the console) and were preventing transaction dialogs from continuing past the step containing the GasSelector component. This affected mainnet only, because in testnet we have hardcoded gas prices (for when the gas prices on mainnet are insane) which is why it was not apparent in testnet.
fix: Contract address not showing correctly
This was caused by `getStickerMarketContractAddress` being moved to `utilsView` but not updated in QML
Update StatusRoundButton colours to support a "tertiary" style (background and icon color overlay), as well as tertiary hover colour.
Fix the modal header close button so that it more closely matches the design.
Replace the buttons in the onboarding modals with StatusRoundButtons were possible.
Closes: #586
Previously, loading sticker packs and stickers would show a lot of blank and non-interactive content.
Now, stickers and sticker packs have grey circles to indicate loading. Additionally, the sticker market button (+) shows a loading indicator until the sticker packs are loaded.
Supports system dark mode. Changes the user appearance setting to a 3-way setting of System, Light, Dark.
New accounts will have their appearance setting set to "System", which uses the system setting to determine if dark mode should be applied.
Breaking change: Users who had their settings on Light Theme, will now get the system theme (light or dark). Users who had their theme set to Dark, will now get the Light theme.
At startup, the onboarding screens will have the system-level setting of dark mode applied or not. Once, logged in, the user settings will be applied.
## Note
An appearance setting of "System" is not dynamic to the system-level setting. This means that if a user has "System" set for their appearance (and ie, the user has light mode set), and then user then changes their system setting from light to dark, the app will not respond until it is restarted. This is due to a limitation of Qt not having a reliable way to propagate these changes to QML.
Related to: #586.
Adds a loading state to stickers, so that a loading indicator appears while the sticker is being downloaded from IPFS.
In the case of a network failure or timetout, a reload button is shown instead. Once network is restored and the reload button is clicked, the image is reloaded from the network, going through the same lifecycle of showing the loading state first.
These components are used to render the chat info in the top bar of the chat view.
`StatusChatInfoButton` is an clickable button that will open chat info dialogs.
Closes#923
This component introduces `StatusLetterIdenticon`, `StatusImageIdenticon`
and `StatusIdenticon`.
- `StatusLetterIdenticon` renders an identicon with a single letter based on a
name.
- `StatusImageIdenticon` renders an actual image based on an identicon URL
- `StatusIdenticon` is a composition of the former both, but with a loading mechanism
to decide which should be rendered
The commit also ensures all of these components are used respectively throughout
the application.
Currently, exceptions thrown during transactions or gas estimation that were spawned in another thread are not being propagated, due to a limitation in nim (see https://nim-lang.org/docs/manual_experimental.html#parallel-amp-spawn).
This means any exceptions from status-go were not propagated correctly and would cause the app to crash. This includes entering the wrong password when trying to send a transaction.
The issue was addressed by passing a `success` variable by reference, which is set to false if an exception was thrown by status-go.
Fixes#788.
Fixes#853.
Fixes#856.
refactor: gas estimation and transaction sends have been abstracted to allow calling `estimateGas`, `send`, and `call` on the contract method (similar to the web3 API).
Moved sticker pack gas estimation and purchase tx over to the new API
*Sticker purchase:*
- gas estimate is done using new API and debounced using a timer
*Wallet send transaction:*
- tokens can now be sent
- gas is estimated correctly for a token tx, and debounced using a timer
***NOTE***
1. If attempting to send tokens on testnet, you must use a custom token as the token addresses in the pre-built list are for mainnet and will not work on testnet.
2. The new API should support all existing gas estimates, send txs, and calls. The loading of sticker pack data, balance, count, purchased sticker packs, etc, can be moved over to the new API. Almost all of the `eth_sendTransaction`, `eth_gasEstimate`, and `eth_call` could be move over as well (that's the idea at least).
This commit extends the AddressInput to perform ENS lookups when valid
ENS values are entered. The lookup happens asynchronously, so we show a loading
indicator as the request is happening.
Closes#790
The problem was that the BigInt lib did not handle decimals at all. `divMod` only let the remainder be what is after the dot. So I created my own divde and multiply methods to move the dot depending on the number of decimals
- Determine if the recent transaction history is being fetched or available before obtaining the first 20 transactions
- On account change, reset the selected tab to show the asset list
- Collectibles were kinda pixelated/blurry (not anymore)
Fixes#806
Add gas estimate for sticker pack purchase.
Update transaction for sticker pack purchase.
Add GasValidator component which validates gas is selected correctly and displays an error message if not. This component is not visible until it is not valid (at which point the valdiation error message is displayed).
In a future PR, need to:
1. estimate gas for token txfer (sendTransaction) via a normalised method for estimating gas for EthSend
2. move sticker pack purchase to use an EthSend object so gas can be estimated and tx sent
Fixes#669.
Composes all tx components to create a send transaction modal for the wallet.
1. Add a reusable TransactionStackView component that wraps a StackView component to show the screens of the Send Tx modal and handles back/forward/reset functionality.
2. Add a reusable TransactionStackGroup which holds tx components and allows modal header and button text to be defined and handles validation for all child components.
3. Add an isValid property to all tx comps for pristine validation state.
4. Reset all components in modal once modal is closed. This consists of a `resetInternal` function that each component should implement to reinstate its original starting state, and a `reset` function that parent components can use to reinstate the overridden properties.
5. Tx error handling to display either a StatusGo error message in the dialog, or wrong password in the TransactionSigner.
6. Fix ReceiveModal to allow for pre-selected account based on current wallet account.
7. Add focused border colour to Input component.
8. Fix issue with last TransactionStackGroup input not being able to obtain focus.
9. Fix fiatBalance not appearing on initial load on AccountSelector.
10. Fix selected asset updated properly when assets changed in the AssetSelector component.
11. AccountSelector is pre-populated with selected wallet account. Supporting work on the components has been done to suppor this.
12. Changing accounts in the "from account" updates the asset balances in the AssetAndAmountInput component.
13. Move validation from ContactSelector to the Select component.
1. Test sending of tokens. This requires that tokens contracts are setup on testnet. Right now, they are set up for contract addresses on mainnet.
2. Loading state once transaction is sent. Button in modal needs to move to a loading state and the "toast" messages in the wallet need to appear informaing user of tx progress.
3. Need to clarify (and implement?) support of ENS names in the AddressInput. It appears that ENS names could be resolved. This would be a long operation and require some kind of UI loading indication.
4. Wallet balances need to be updated on every block, so for example, sending funds between accounts I should be able to see the balance updated in real time.
1. Sending to a contact currently doesn't work because the ContactSelector component selects the Contact's whipser key, instead of his/her wallet address. May need to figure out how this is done in status-react. As it stands, attempting to send to a contact will crash the app.
2. Sending *from* an imported account does not work, with an error from StatusGo `cannot locate account for address: 0x123...`
As per discussion, there's no "primary" and "secondary" type in round buttons.
They just appear in different sizes (44x44, 40x40, 32x32). The size determines
their look & feel
Jonathan Rainville
Pascal Precht
staked-smart-ace
Richard Ramos
Malik Al-Jabr
Iuri Matias
emizzle
Michael Bradley, Jr
