Fixes: #926.
Gas estimations were not being decoded correctly (indicated with "error getting gas price predictions" in the console) and were preventing transaction dialogs from continuing past the step containing the GasSelector component. This affected mainnet only, because in testnet we have hardcoded gas prices (for when the gas prices on mainnet are insane) which is why it was not apparent in testnet.
fix: Contract address not showing correctly
This was caused by `getStickerMarketContractAddress` being moved to `utilsView` but not updated in QML
Update StatusRoundButton colours to support a "tertiary" style (background and icon color overlay), as well as tertiary hover colour.
Fix the modal header close button so that it more closely matches the design.
Replace the buttons in the onboarding modals with StatusRoundButtons were possible.
Closes: #586
Previously, loading sticker packs and stickers would show a lot of blank and non-interactive content.
Now, stickers and sticker packs have grey circles to indicate loading. Additionally, the sticker market button (+) shows a loading indicator until the sticker packs are loaded.
Supports system dark mode. Changes the user appearance setting to a 3-way setting of System, Light, Dark.
New accounts will have their appearance setting set to "System", which uses the system setting to determine if dark mode should be applied.
Breaking change: Users who had their settings on Light Theme, will now get the system theme (light or dark). Users who had their theme set to Dark, will now get the Light theme.
At startup, the onboarding screens will have the system-level setting of dark mode applied or not. Once, logged in, the user settings will be applied.
## Note
An appearance setting of "System" is not dynamic to the system-level setting. This means that if a user has "System" set for their appearance (and ie, the user has light mode set), and then user then changes their system setting from light to dark, the app will not respond until it is restarted. This is due to a limitation of Qt not having a reliable way to propagate these changes to QML.
Related to: #586.
Adds a loading state to stickers, so that a loading indicator appears while the sticker is being downloaded from IPFS.
In the case of a network failure or timetout, a reload button is shown instead. Once network is restored and the reload button is clicked, the image is reloaded from the network, going through the same lifecycle of showing the loading state first.
These components are used to render the chat info in the top bar of the chat view.
`StatusChatInfoButton` is an clickable button that will open chat info dialogs.
Closes#923
This component introduces `StatusLetterIdenticon`, `StatusImageIdenticon`
and `StatusIdenticon`.
- `StatusLetterIdenticon` renders an identicon with a single letter based on a
name.
- `StatusImageIdenticon` renders an actual image based on an identicon URL
- `StatusIdenticon` is a composition of the former both, but with a loading mechanism
to decide which should be rendered
The commit also ensures all of these components are used respectively throughout
the application.
Currently, exceptions thrown during transactions or gas estimation that were spawned in another thread are not being propagated, due to a limitation in nim (see https://nim-lang.org/docs/manual_experimental.html#parallel-amp-spawn).
This means any exceptions from status-go were not propagated correctly and would cause the app to crash. This includes entering the wrong password when trying to send a transaction.
The issue was addressed by passing a `success` variable by reference, which is set to false if an exception was thrown by status-go.
Fixes#788.
Fixes#853.
Fixes#856.
refactor: gas estimation and transaction sends have been abstracted to allow calling `estimateGas`, `send`, and `call` on the contract method (similar to the web3 API).
Moved sticker pack gas estimation and purchase tx over to the new API
*Sticker purchase:*
- gas estimate is done using new API and debounced using a timer
*Wallet send transaction:*
- tokens can now be sent
- gas is estimated correctly for a token tx, and debounced using a timer
***NOTE***
1. If attempting to send tokens on testnet, you must use a custom token as the token addresses in the pre-built list are for mainnet and will not work on testnet.
2. The new API should support all existing gas estimates, send txs, and calls. The loading of sticker pack data, balance, count, purchased sticker packs, etc, can be moved over to the new API. Almost all of the `eth_sendTransaction`, `eth_gasEstimate`, and `eth_call` could be move over as well (that's the idea at least).
This commit extends the AddressInput to perform ENS lookups when valid
ENS values are entered. The lookup happens asynchronously, so we show a loading
indicator as the request is happening.
Closes#790
The problem was that the BigInt lib did not handle decimals at all. `divMod` only let the remainder be what is after the dot. So I created my own divde and multiply methods to move the dot depending on the number of decimals
- Determine if the recent transaction history is being fetched or available before obtaining the first 20 transactions
- On account change, reset the selected tab to show the asset list
- Collectibles were kinda pixelated/blurry (not anymore)
Fixes#806
Add gas estimate for sticker pack purchase.
Update transaction for sticker pack purchase.
Add GasValidator component which validates gas is selected correctly and displays an error message if not. This component is not visible until it is not valid (at which point the valdiation error message is displayed).
In a future PR, need to:
1. estimate gas for token txfer (sendTransaction) via a normalised method for estimating gas for EthSend
2. move sticker pack purchase to use an EthSend object so gas can be estimated and tx sent
Fixes#669.
Composes all tx components to create a send transaction modal for the wallet.
1. Add a reusable TransactionStackView component that wraps a StackView component to show the screens of the Send Tx modal and handles back/forward/reset functionality.
2. Add a reusable TransactionStackGroup which holds tx components and allows modal header and button text to be defined and handles validation for all child components.
3. Add an isValid property to all tx comps for pristine validation state.
4. Reset all components in modal once modal is closed. This consists of a `resetInternal` function that each component should implement to reinstate its original starting state, and a `reset` function that parent components can use to reinstate the overridden properties.
5. Tx error handling to display either a StatusGo error message in the dialog, or wrong password in the TransactionSigner.
6. Fix ReceiveModal to allow for pre-selected account based on current wallet account.
7. Add focused border colour to Input component.
8. Fix issue with last TransactionStackGroup input not being able to obtain focus.
9. Fix fiatBalance not appearing on initial load on AccountSelector.
10. Fix selected asset updated properly when assets changed in the AssetSelector component.
11. AccountSelector is pre-populated with selected wallet account. Supporting work on the components has been done to suppor this.
12. Changing accounts in the "from account" updates the asset balances in the AssetAndAmountInput component.
13. Move validation from ContactSelector to the Select component.
1. Test sending of tokens. This requires that tokens contracts are setup on testnet. Right now, they are set up for contract addresses on mainnet.
2. Loading state once transaction is sent. Button in modal needs to move to a loading state and the "toast" messages in the wallet need to appear informaing user of tx progress.
3. Need to clarify (and implement?) support of ENS names in the AddressInput. It appears that ENS names could be resolved. This would be a long operation and require some kind of UI loading indication.
4. Wallet balances need to be updated on every block, so for example, sending funds between accounts I should be able to see the balance updated in real time.
1. Sending to a contact currently doesn't work because the ContactSelector component selects the Contact's whipser key, instead of his/her wallet address. May need to figure out how this is done in status-react. As it stands, attempting to send to a contact will crash the app.
2. Sending *from* an imported account does not work, with an error from StatusGo `cannot locate account for address: 0x123...`
As per discussion, there's no "primary" and "secondary" type in round buttons.
They just appear in different sizes (44x44, 40x40, 32x32). The size determines
their look & feel
- link color in compact mode
- channel links did not have a #
- clicking on a mention should show that profile
- The AddChat button image didn't reposition when closing
Necessary cases are:
- Onboarding to show the list of 5 accounts
- In QML when we show it to the user for the backup
- Change it to a Loader, so the component and its memory is cleaned when closed
So far our `IconButton` hasn't been a proper button control which comes
with many downsides, such as:
- Some default button behaviours need to be simulated (e.g. `onClicked`)
- Any support built-in features for all controls in QML like `ToolTip` aren't can't be used
- There are probably accessibility aspects to it as well
We use the `IconButton` in many different places. Sometimes it doesn't
even act as a button, but just as an icon. I suggest we introduce a separate
`StatusIcon` component for that in future changes.
This commit turns the `IconButton` into a proper `RoundButton`, restoring
the control behaviour and features we get from QML.
This also required to expose the `icon` property as a `iconImg`,
because a `RoundButton` already comes with an `icon`.
On the other hand, we could remove the `onClick` simulation and can now
take advantage of components like `ToolTip`.
This commit fine-tunes the layout of the advanced modal input controls.
It also adds validation so that only numeric values are accepted as
gas price and gas limit values
Add receive modal in the wallet to show a QR code and address selector
Improve Input component to be able to show a Copy button that copies to clipboard
Improve AccountSelector modal to be able to not show details and fix eliding
When tokens are added/removed, the asset list in the AssetAndAmountInput is updated.
The selected asset can be specified by the parent component which is needed for things like sticker market where we need to set SNT as the fixed token.
Improved the validation for the component:
- validate() can be called externally
- validation display is handled internally and messages can be customised
- validation error messages are handled by the Input component and validation UX is consistent with other tx components
- Added an nsbp in front of paragraphs, otherwise the alignment property was ignored
- Enabled richformat for channel list to avoid emoji overlap in last message
Remove all `walletModel` references from the `AccountSelector` component, as the component should not be aware of the API's existence.
Pass currency to `AccountSelector` component.
- Show welcome page only when there are no ens names registered
- If you already have an ens username for the current account, connect and mark it as preferred name
- State machine navigation
Fixes#670.
Component spec based on https://www.notion.so/emizzle/Wallet-transaction-components-2003b78a8d0d41c4ab3d21eb2496fb20.
Changes the current Select shared component to a model databound component. This means we can bind directly to `QAbstractListModel`'s coming from Nim instead of needing manipulating the data in to javascript objects. The changes to the Select component will be used for the upcoming Asset selector shared component.
This introduces the ability to:
- list search existing contacts
- block contacts
- unblock contacts
- list blocked contacts
- remove contacts
- search and add contacts
Closes#608
Adds settings API for getting current network details.
Uses the current network details to display the correct etherscan link in QML (etherscan URL is a setting in the current network settings).
Allow switching to Ropsten by flipping a toggle switch in Profile > Advanced settings.
When switching networks, note that installed stickers will be uninstalled, and recent stickers will be removed. Sticker packs can be reinstalled after login. Purchased sticker packs will not need to be re-purchased, but will need to be re-installed.
Mailserver fleet information will **not** be updated. This can be controlled by a separate (undeveloped yet) setting.
Sticker pack details retreived from contract:
- pack data decoded from contract response
- data contains contentHash which, once decoded, contains an IPFS identifier
- futher pack data in EDN format is downloaded from IPFS
- the EDN info is decoded in to a StickerPack
List of available packs from contract are obtained separately from list of installed contracts (stored as a setting in Status-go).
Sticker market contains dynamic list of sticker packs. The sticker button shown for each pack has all states defined (in the design) for all UI states (ie bought, free, installed, pending, etc)
Add modal popup showing sticker pack details and list of stickers to be un/installed. Contains a "larger" version of the sticker pack button with many differnt UI states defined.
Uninstallation of a sticker pack removes those sticker pack's stickers from the recent sticker list and persists the list
Simplify the view model by including stickers, instead of setting an "activeStickerPackId" property. This allowed for display of sticker pack stickers to be displayed in the modal popup separately from the sticker packs shown in the market.
Jonathan Rainville
Pascal Precht
emizzle
hydr063n
Iuri Matias
Michael Bradley, Jr
Richard Ramos
Dean Eigenmann