formattedPlainTextFilter was not reset when suggestion
box was closed causing the insertMention function to be
called again even thought there was no mention in the
chat input
Closes#3535
Fixes#3606.
The “retry” link for failed messages was not aligned correctly in the light theme. This was due to setting the `verticalCenter` as well as `anchors.top` in some situations. `verticalCenter` has been removed in favour of setting the top and bottom anchors.
Fixes: #3473.
Sometimes when blocking users and changes channels, blocked user messages would still appear.
This PR fixes the issue by toggling a `hide` property on messages from a contact when that contact is blocked or unblocked. Previously, the messages were only removed from the view when the contact was blocked, but when the view was reloaded, that state was not tracked correctly.
In case clicked channel:
- exists in a community -> the app will switch you to it
- doesn't exist in a community, but exists in the public chat list -> the app
will switch to `Chat` section and also to the appropriate channel there
- doesn't exist in a community and doesn't exist in the public chat list -> the app
will switch to `Chat` section and join new channel
Fixes: #3489
When StatusQ switched to using `DelegateModel` in `StatusChatList` to enable drag and drop,
we lost the API `itemAt` which was previously exposed via the `Repeater` that was aliased as
`chatListItems`.
StatusQ now exposes `statusChatListItems` additionally so we can still access `model.itemAt`
which is used in this commit.
The only reason this is done here though, is because we need to update the profile picture of
contacts when we get a contact changed signal. Ideally, we handle contact changes including the
profile picture entirely in the backend and have it then just rerender the screen (instead of
using a `Connection`).
Fixes#3328
Closes#3410.
Re-enables open membership communities, with necessary changes in the Inivitation Bubble for one-on-one chats.
fix: add/edit communities components not appearing
On add/edit community popup load, some components below the thumbnail image picker were not appearing until the app window was resized. Removing the height of the ScrollView fixed the issue (on mac).
NOTE: this may require windows and linux users to test.
Closes#3307.
WalletV2 view can be toggled between normal wallet view and the SavedAddresses view.
Users can load, add, edit, and delete saved addresses.
Favouriting a saved address is out of scope, as is sending to a saved addresses, drilling down in to a saved address, and supporting multiple networks.
Updates components that utilised the StatusMinLengthValidator component to support the changes made to StatusQ.
### Notes
1. Depends on status-go PR https://github.com/status-im/status-go/pull/2356
2. Depends on StatusQ PR https://github.com/status-im/StatusQ/pull/394.
# Conflicts:
# src/app/wallet/v2/view.nim
# ui/app/AppLayouts/WalletV2/WalletV2Layout.qml
* The userlist toggle made persistent between restarts
* Members is enabled by default for communities
* Public channels changed title to "last seen"
instead of "Members"
Closes#3502
There was a breaking change introduced 8d32c1d933
which caused reference errors in various modals.
This commit fixes the modal to create and edit community channels
by ensuring we're accessing `contentItem` and also only setting
channel data when editing a channel.
Closes#3390
fixed to display online status only if is the current user and
if they have been active in the last 7 minutes. Respective color
is shown depending on if they are in "do not disturb" mode or they
have been active more than 5 minutes ago
Closes#3282
Avoid computation when it is not needed for the suggestion filter
This is quite visible when the member list contains 1000s of members.
It is the case when you load historical message (1 month)
This commit enables users to enter fully qualified ENS names manually
and marking them as mentions, which are then later being replaced with
pubkeys.
The changes do not prevent users from entering ENS names that don't exist.
There's also a fix that ensure prepended "@" signs are removed from the
items selected in the suggestions box.
Closes#3149
Removed all computation of suggestion from qml
Reuse user list in order to populate the suggestion box
As a side effect, the suggestion are not serialized from qml to
nim
Remove InputArea which seems not used anymore
fixes#3251
- Being able to react in timeline chat
- Once there is a reaction, being able to remove them or add new
- Height of the message taking in consideration if there is reaction or
not
As requested by design popup search added for the left side, click on a search
field (above channels list).
Refers to the changes requested by the issue-2934
Fixes: #2934
The transfer ownership popup triggered by the backup community baner button
was behaving weirdly because the banner from where it originates lives inside
a loader that is deactivated once the popup was opened.
Moving the logic that deactivates the loader into the onClosed handler of the
popup solves this issue.
Thanks to @pinebit for getting to the bottom of this!
Fixes#2997
Updated offset of the notification tooltip arrow based on if the members list is visible. The arrow should be in center when member list is visible else it should be right aligned as there is no place on the window
fixes#3102
Updated from PopupMenu to StatusPopMenu. Removed buttons not in design.
Also added left and right button functionalXity on memeber list
fixes#2956, #3162
Feature added. Firstly we check if the searched message is already displayed and if yes simply jump
to it, if not then we are loading new 20 messages in the past using cursor and check if the
searched message's id is among those received messages. We do that in a loop till we find the
message we are searching for.
Fixes: #3005
Searching messages by some term for a specific channel is added on the side of status-go and an
appropriate part on the side of nim is developed accordingly.
Fixes: #2912
Current code adapted to handle future changes on message search (like searching message in multiple
channels).
Memory leak which was happening in qml assigning (copying) MessageItem to qml variable messageItem
(where that qml variable messageItem was never deleted) is fixed.
Fixes: #2912
Searching messages by some term for a specific channel is added on the side of status-go and an
appropriate part on the side of nim is developed accordingly.
Fixes: #2912
Current code adapted to handle future changes on message search (like searching message in multiple
channels).
Memory leak which was happening in qml assigning (copying) MessageItem to qml variable messageItem
(where that qml variable messageItem was never deleted) is fixed.
Fixes: #2912
This broke during the modal refactoring because we're no longer relying
on `chatsModel.contextChannel`.
Passing the channel item to the popup ensures it's properly hydrated again.
Closes#3050
This also updates StatusQ as the underlying StatusListItem component wasn't able
to handle multi-line subtitles very well. Also it didn't support tertiaryTitle, which
is needed in this UI.
As described in #3015, when editing channels that belong to a category of a community,
after saving them, they'll get kicked out of the category.
This is because we haven't passed the category id along the API that performs the
save operation.
This commit ensures we have access to a category chats' `categoryId` and send it
over to `editCommunityChat` RPC API provided by status-go
Fixes#3015
There are a few issues with the popup's content when there are many channels in a community:
1. Channel items belonging to other categories would still take space in the list
1. Due to the longer list of channels, the delete button wouldn't be fully visible (scrolling down
helps here)
2. Scrolling down is hard because the `ListView` in use is `interactive`
3. Even when `interactive` is set to false, one would scroll the name input out of the viewport.
To solve these, this commit rearchitects the popup's content such that:
1. The name input is always static and in place
2. The scrollview starts with the channel list and ends with the channel list
3. The delete button is positioned below the scrollview
4. The scrollview has a max height of 300 so that the popup doesn't grow too big
5. Invisible channel items won't have a height anymore
The result is that the middle section of the popup becomes scrollable in case there's many
channel items, while both, the name input and the delete button stay in the viewport.
Fixes#3013
This was lost during the refactor to use StatusQ components because it wasn't
clear to me that community channel descriptions should be rendered there.
Fixes#2982
Alexandra Betouni
Khushboo Mehta
Eric Mastro
Sale Djenic
Anthony Laibe
Pascal Precht
Michael Bradley, Jr
B.Melnik
Richard Ramos
Andrei Smirnov
Alexandra Betouni
Jonathan Rainville