`StyledButton` is considered obsolete and by using `StatusButton` we're getting
the expected and correct look & feel of buttons by default.
Closes#1627
- Account color is used in list hightlight, separator and tabs
- Popup fields are cleared when opened
- Account color is randomized when popup is opened
- Show scrollbars in asset list if needed
- Show scrollbars in account list if needed
- Fix margin between assets
- Add symbol to asset amounts
- Stop scrolling at element bounds
The transaction component's `reset` functionality was meant ot reset a form when the modal was closed. It was difficult to manage and added extra overhead for each additional transaction modal created.
Instead of using reset functions, we can use Loaders to load and destroy the modal's as they are opened and closed. We do not need to keep them in memory and then also reset their functions. It creates a smaller memory footprint to destroy the object and reload on open.
feat: load gas prediction prices asynchronously
We were previously displaying an address in the "to" field for TransactionPreview. Instead, this is meant to be a contact view.
- Fix ContactSelector to trigger selectedContactChanged
- Fix RecipientSelector > ContactSelector to trigger resolveEns from outside call to prevent infinite loop from the above fix
- Add alias to pre-selected contact for the Contact view of TransactionPreview
- Add option to change debounce delay so that when values are pre-selected (readonly), there is no delay before resolution.
- Fix missing tx data param in walletModel.estimateGas
I noticed that the 1:1 chat commands were not able to send token transactions due to "intrinsic gas too low" error. I quickly realised there there were a few components missing, which have been fixed.
*feat: update the 1:1 chat commands transaction modal to allow editing of the from account and network fee*
The TransactionStackGroup was updated slightly to allow manual control of back/next actions.
Fixes#870.
*fix: Create distinct modal transaction actions*
Previously, adding `Connection`s for the `walletModel.transactionWasSent` signal in different dialogs would cause the signal to be handled in the wrong dialog. The solution was to pass a `uuid` from the requesting dialog, and include the `uuid` in the response, so that only requests that were requested from the dialog would be handled.
*fix: update 1:1 translations*
All the translations were not being translated for me. I noticed that they did not exist in the `.ts` translation files either.
- If the count matches the required amount a tick will be included next the count
- The format is "✓ 12 words"
- This commit also fixes the text color when in dark in the wallet add new account modal
Currently, exceptions thrown during transactions or gas estimation that were spawned in another thread are not being propagated, due to a limitation in nim (see https://nim-lang.org/docs/manual_experimental.html#parallel-amp-spawn).
This means any exceptions from status-go were not propagated correctly and would cause the app to crash. This includes entering the wrong password when trying to send a transaction.
The issue was addressed by passing a `success` variable by reference, which is set to false if an exception was thrown by status-go.
Fixes#788.
Fixes#853.
Fixes#856.
refactor: gas estimation and transaction sends have been abstracted to allow calling `estimateGas`, `send`, and `call` on the contract method (similar to the web3 API).
Moved sticker pack gas estimation and purchase tx over to the new API
*Sticker purchase:*
- gas estimate is done using new API and debounced using a timer
*Wallet send transaction:*
- tokens can now be sent
- gas is estimated correctly for a token tx, and debounced using a timer
***NOTE***
1. If attempting to send tokens on testnet, you must use a custom token as the token addresses in the pre-built list are for mainnet and will not work on testnet.
2. The new API should support all existing gas estimates, send txs, and calls. The loading of sticker pack data, balance, count, purchased sticker packs, etc, can be moved over to the new API. Almost all of the `eth_sendTransaction`, `eth_gasEstimate`, and `eth_call` could be move over as well (that's the idea at least).
This commit extends the AddressInput to perform ENS lookups when valid
ENS values are entered. The lookup happens asynchronously, so we show a loading
indicator as the request is happening.
Closes#790
- Determine if the recent transaction history is being fetched or available before obtaining the first 20 transactions
- On account change, reset the selected tab to show the asset list
- Collectibles were kinda pixelated/blurry (not anymore)
Fixes#806
Add gas estimate for sticker pack purchase.
Update transaction for sticker pack purchase.
Add GasValidator component which validates gas is selected correctly and displays an error message if not. This component is not visible until it is not valid (at which point the valdiation error message is displayed).
In a future PR, need to:
1. estimate gas for token txfer (sendTransaction) via a normalised method for estimating gas for EthSend
2. move sticker pack purchase to use an EthSend object so gas can be estimated and tx sent
Fixes#669.
Composes all tx components to create a send transaction modal for the wallet.
1. Add a reusable TransactionStackView component that wraps a StackView component to show the screens of the Send Tx modal and handles back/forward/reset functionality.
2. Add a reusable TransactionStackGroup which holds tx components and allows modal header and button text to be defined and handles validation for all child components.
3. Add an isValid property to all tx comps for pristine validation state.
4. Reset all components in modal once modal is closed. This consists of a `resetInternal` function that each component should implement to reinstate its original starting state, and a `reset` function that parent components can use to reinstate the overridden properties.
5. Tx error handling to display either a StatusGo error message in the dialog, or wrong password in the TransactionSigner.
6. Fix ReceiveModal to allow for pre-selected account based on current wallet account.
7. Add focused border colour to Input component.
8. Fix issue with last TransactionStackGroup input not being able to obtain focus.
9. Fix fiatBalance not appearing on initial load on AccountSelector.
10. Fix selected asset updated properly when assets changed in the AssetSelector component.
11. AccountSelector is pre-populated with selected wallet account. Supporting work on the components has been done to suppor this.
12. Changing accounts in the "from account" updates the asset balances in the AssetAndAmountInput component.
13. Move validation from ContactSelector to the Select component.
1. Test sending of tokens. This requires that tokens contracts are setup on testnet. Right now, they are set up for contract addresses on mainnet.
2. Loading state once transaction is sent. Button in modal needs to move to a loading state and the "toast" messages in the wallet need to appear informaing user of tx progress.
3. Need to clarify (and implement?) support of ENS names in the AddressInput. It appears that ENS names could be resolved. This would be a long operation and require some kind of UI loading indication.
4. Wallet balances need to be updated on every block, so for example, sending funds between accounts I should be able to see the balance updated in real time.
1. Sending to a contact currently doesn't work because the ContactSelector component selects the Contact's whipser key, instead of his/her wallet address. May need to figure out how this is done in status-react. As it stands, attempting to send to a contact will crash the app.
2. Sending *from* an imported account does not work, with an error from StatusGo `cannot locate account for address: 0x123...`
So far our `IconButton` hasn't been a proper button control which comes
with many downsides, such as:
- Some default button behaviours need to be simulated (e.g. `onClicked`)
- Any support built-in features for all controls in QML like `ToolTip` aren't can't be used
- There are probably accessibility aspects to it as well
We use the `IconButton` in many different places. Sometimes it doesn't
even act as a button, but just as an icon. I suggest we introduce a separate
`StatusIcon` component for that in future changes.
This commit turns the `IconButton` into a proper `RoundButton`, restoring
the control behaviour and features we get from QML.
This also required to expose the `icon` property as a `iconImg`,
because a `RoundButton` already comes with an `icon`.
On the other hand, we could remove the `onClick` simulation and can now
take advantage of components like `ToolTip`.
This commit fine-tunes the layout of the advanced modal input controls.
It also adds validation so that only numeric values are accepted as
gas price and gas limit values
Add receive modal in the wallet to show a QR code and address selector
Improve Input component to be able to show a Copy button that copies to clipboard
Improve AccountSelector modal to be able to not show details and fix eliding
When tokens are added/removed, the asset list in the AssetAndAmountInput is updated.
The selected asset can be specified by the parent component which is needed for things like sticker market where we need to set SNT as the fixed token.
Improved the validation for the component:
- validate() can be called externally
- validation display is handled internally and messages can be customised
- validation error messages are handled by the Input component and validation UX is consistent with other tx components
Remove all `walletModel` references from the `AccountSelector` component, as the component should not be aware of the API's existence.
Pass currency to `AccountSelector` component.
Fixes#670.
Component spec based on https://www.notion.so/emizzle/Wallet-transaction-components-2003b78a8d0d41c4ab3d21eb2496fb20.
Changes the current Select shared component to a model databound component. This means we can bind directly to `QAbstractListModel`'s coming from Nim instead of needing manipulating the data in to javascript objects. The changes to the Select component will be used for the upcoming Asset selector shared component.
Adds settings API for getting current network details.
Uses the current network details to display the correct etherscan link in QML (etherscan URL is a setting in the current network settings).
Add sticker popup
Add send sticker message
Add ability to select sticker pack and show stickers for pack with scroll
1. Sticker history
2. Install sticker packs
3. Sticker market
1. Sticker packs are installed on app start up until installation of sticker pack functionality is added
2. Optimisations such as preloading images to be done so that sticker images are not downloaded each time.
Replaces PR #105.
Implement a `pkg-macos` target that ultimately results in `Status.dmg` being
written to `pkg/`. Due to [limitations][limits] of the OpenSSL `.dylib`s in
`/usr/lib/` on macOS, `libssl.a` and `libcrypto.a` are statically linked into
`bin/nim_status_client` from a [Homebrew][brew] "bottle" that is compatible
with macOS 10.13 (the oldest macOS version compatible with Qt v5.14).
`pkg-macos` creates an `.app` bundle layout in `tmp/macos/dist` based partly on
information in a very helpful [StackOverflow answer][so-answer]. Note the part
of the answer (toward the end) that explains a problem with the working
directory and how to fix it. That's the reason for the `nim_status_client.sh`
script introduced in this commit (it gets copied into the bundle). It's also
the reason for having `Info.plist` copied into the bundle before `macdeployqt`
is run (see below) and then overwriting it with `Info.runner.plist` before
creating the `.dmg` file. The app icons file `status-icon.icns` was taken from
`deployment/macos/` in the [status-react][sr] repo.
The [`macdeployqt`][macdeployqt] tool is used to copy the needed portions of Qt
into the bundle; it automatically updates `rpath`, etc. so the
`nim_status_client` executable in the bundle can locate the libs within the
bundle.
`macdeployqt` is run twice, for the "outer" and "inner" `.app` bundles,
because of an apparent bug in `macdeployqt` that results in QtWebEngine related
resources not being processed correctly on the first pass. This results in some
bloat in the final bundle but it seems unavoidable at present.
The [create-dmg][cdmg] tool is used to package the bundle into a `.dmg`
file. There are two reasons for this:
1. It produces a nice looking icon for the `.dmg` that overlays the Status logo
on an external disk icon.
2. `Info.plist` needs to be overwritten after running `macdeployqt` (see
explanation above) but before creating the `.dmg` file. If we passed the `-dmg`
cli option to `macdeployqt` to have it generate the `.dmg` file then it
wouldn't be possible to overwrite `Info.plist`.
So there is a cosmetic reason and a practical reason for using another
tool. Probably the biggest downside is that `create-dmg` is implemented in
Node.js so it needs to be installed with `npm`; that's the reason this commit
introduces `package.json`, etc. Note that zero code from `node_modules` ends up
in the `.app` bundle or the `.dmg` file.
Code signing of the macOS `.app` bundle and `.dmg` is attempted if the
environment variable `MACOS_CODESIGN_IDENT` is defined. In that case, the
environment variable `MACOS_KEYCHAIN_OPT` may optionally be defined with the
path to a preferred keychain database file.
Refactor a number of sections in the Makefile for consistency's sake, e.g. the
`appimage` target becomes `pkg-linux` and ultimately results in
`NimStatusClient-x86_64.AppImage` being written to `pkg/`.
Make a number of changes to bring the Linux packaging steps up-to-date and use
the `-qmlimport` cli option of `linuxdeployqt` to simplify resolution of Qt
plugins.
Note that `make pkg` will correctly resolve to `make pkg-linux` or `make
pkg-macos` depending on the OS in use.
Consistently use lower-case "c" in the name of *components* directories and
imports.
[limits]: https://developer.apple.com/forums/thread/124782
[brew]: https://brew.sh/
[so-answer]: https://stackoverflow.com/a/3251285
[sr]: https://github.com/status-im/status-react/tree/develop/deployment/macos
[macdeployqt]: https://doc.qt.io/qt-5/macos-deployment.html
[cdmg]: https://github.com/sindresorhus/create-dmg
There's still some things that needs to be done (possibly in future commits):
[ ] Asset icons need to be determined so they can be displayed along the transaction
[ ] Transaction values need to be converted to decimal values
[ ] Date-time formatting
[ ] Grouping of transactions by days
Having all the different input types in one file made it simpler to design, but created an issue with memory, because all the aliases, properties and images were created for all types even if you only used a basic Input. I tried using Loaders, but making aliases within loaders is super painful/impossible in some cases.
Similar to its `footer` content, ModalPopup can now receive header components
allowing consumers to design the header part of the modal to their likings.
Usage:
```
ModalPopup {
id: popup
header: Item {
...
}
...
}
```
The header section will take the height of the root element of the substree
passed to `header`
simplify controllers and views, make everything more consistent
refactor wallet to use asset model
move some of wallet logic away from the controller
move ChatMessage to model
move chatItem model
organize models folder
simplify chat message and chat item
rename messageList to message_list
simply addresses in the controller
rename mailservers list
refactor how profile is set
refactor/simplify profile view
refactor/simplify adding mailservers
rename wallet view
simplify wallet assets
rename nodeView to view
extract channel list view
extract channel list view
refactor channel list / chats view
move signals out of app folder
address code reviews
Pascal Precht
Jonathan Rainville
Richard Ramos
hydrogen
emizzle
decanus
Iuri Matias
Michael Bradley, Jr
