Fixes: #2725.
When clicking on the History tab for a wallet account, there was a QML error for `qrc:/app/AppLayouts/Wallet/WalletLayout.qml:113: TypeError: Property 'checkIfHistoryIsBeingFetched' of object HistoryTab_QMLTYPE_503(0x7fed35da2710) is not a function`. This must have been reintroduced when StatusQ objects were introduced. It has now been removed.
chore: change log level to warn for non-archival node
Previously, there was an error being logged for non-archival infura nodes being used (typically in dev). This log level has been reduced to a warning as the application still functions with non-archival nodes.
add getSettings methods to src/status
fix issue with calling getSettings; document issue
remove most direct references to libstatus; document some common issues
remove most references to libstatus wallet
add mailserver layer to status lib; remove references to libstatus mailservers
remove libstatus accounts references
move types out of libstatus; remove libstatus types references
remove libstatus browser references
refactor libstatus utils references
remove more references to libstatus stickers
remove references to libstatus constants from src/app
remove more libstatus references from src/app
refactor token_list usage of libstatus
refactor stickers usage of libstatus
refactor chat usage of libstatus
remove libstatus references from the wallet view
remove logic from ens manager view
fix issue with import & namespace conflict
remove unnecessary imports
refactor provider view to not depend on libstatus
refactor provider view
refactor: move accounts specific code to its own section
fix account selection
move collectibles to their own module
update references to wallet transactions
refactor: move gas methods to their own file
refactor: extract tokens into their own file
refactor: extract ens to its own file
refactor: extract dappbrowser code to its own file
refactor: extract history related code to its own file
refactor: extract balance to its own file
refactor: extract utils to its own file
clean up wallet imports
fix: identicon for transaction commands
Fixes#2533
Fixes: #2539.
Transaction history is now correctly being fetched from status-go as per mobile. Firstly, when accounts are added (ie as watch accounts), `wallet_checkRecentHistory` must be called first so that the status-go db is populated. After that, `wallet_getTransfersByAddress` can be called. On app load, when we run the `initBalance` logic, we are calling `wallet_getTransfersByAddress`, asking for the last 20 transactions with the `loadMore` parameter set to false. When the user navigates to the Wallet > History tab, they can then click “Load More” to fetch more transactions from status-go. Once the number of transactions returns false below the expected amount, the remaining transactions to fetch have been exhausted and the “Load More” button is disabled.
feat: add non-archival node warning to the UI to indicate to the user that they may not have complete results
feat: set active account to the added account
Once an account is added to the wallet, that newly added account is selected as the active account.
1. The “load more” button is active when new transactions that aren’t already displayed are returned from `wallet_getTransfersByAddress`. This is the only way to enable or disable the “Load more” button as status-go is not able to return information regarding whether or not there are more transactions to be fetched. The downside to this is that lets say the last page of transactions is returned, but there are no more pages left. These returned txs are not currently displayed, so the “load more” button will still be enabled. However, the next click of the button will return 0 results, thus disabling it. It’s effectively an extra click to get to the disabled state.
2. For more information on how the `toBlock` parameter operates for the `wallet_getTransfersForAddress` RPC call, see https://notes.status.im/XmENTrVRRaqhwE4gK0m8Mg?view.
Fixes#2448.
Currently, if a wrong password is entered when generating a wallet account, the app will crash due to attempting to decode a `GeneratedAccount ` from an rpc response containing only an error.
With this PR, we are detecting if an error is returned in the response, and if so, raising a StatusGoException. This exception is caught in the call chain, and translated in to a `StatusGoError` which is serialised and sent to the QML view, where it is parsed and displayed as an invalid password error in the input box.
refactor: remove string return values as error messages in wallet model
In the wallet model, we were passing back empty strings for no error, or an error as a string. This is not only confusing, but does not benefit from leaning on the compiler and strong types. One has to read the entire code to understand if a string result is returned when there is no error instead of implicitly being able to understand there is no return type.
To alleviate this, account creation fundtions that do not need to return a value have been changed to a void return type, and raise `StatusGoException` if there is an error encountered. This can be caught in the call chain and used as necessary (ie to pass to QML).
refactor: move invalid password string detection to Utils
Currently, we are reading returned view model values and checking to see if they include a known string from Status Go that means there was an invalid password used. This string was placed in the codebased in mulitple locations.
This PR moves the string check to a Utils function and updates all the references to use the function in Utils.
Fixes: #2257.
If a user had selected a watch-only address in the wallet, the backend `walletModel.currentAccount` property would also change. When loading a transaction modal, this property was used to set the `selectedAccount` value for the “from” `AccountSelector`, regardless if the account was a watch-only address.
This PR updates the logic for `selectedAccount` such that it will only allow the account to be selected if it is not a watch-only account.
A `StatusIcon` that rotates infinitely and can be used for indicating
pending states.
Usage:
```
StatusLoadingIndicator {
width: 24 // default: 17
height: 24 // default: 17
color: "red" // default: loading asset color
}
```
This also removes `LoadingImage` component from `ui/shared`.
Closes#2360
Fixes: #2248.
Add a close button to the seed backup warning banner in the wallet. The banner will reappear upon application restart as long as the seed hasn’t already been backed up (`profileModel.mnemonic.isBackedUp`).
A new .svg with a white outline needed to be added as well because the original “close.svg” had a purple outline, which would show up when the ColorOverlay applied to the close button had an opacity less than 1.0.
This commit introces global settings that apply across accounts used
inside the application. This is useful when settings like the selected
locale should b the same across all accounts.
Closes#2144
When contract addresses that are not ERC-20 or ERC-721 were input, the token would be allowed to be added and would crash the app.
In addition, when an ERC-20 contract was deployed without a name and symbol, “Invalid ERC-20 address” would appear.
This PR adds error checking from the token detail lookup and reports the error back to the user in the modal. This prevents non-ERC-20/721 contracts from being able to be added to the app and prevents a crash.
There's a bug in the `SetCurrencyModal` where it runs into a callstack size
exceeded error because we're calling it's `open()` API to open itself.
That function happens to call itself again and again.
The reason that API was introduced in the first place, was to ensure that
the configured default currency is reflected currectly.
This commit fixes that issue by getting rid off the `open()` and `close()`
APIs which cause the mentioned error, and rely on `openPopup`'s parameters
configuration instead.
There are some inconcistencies in the application when it comes to
button UI elements because we're using `StatusButton` in some places,
in other we use `StyledButton`. The latter is the original
component we've created when we started out building Status
Desktop, but is planned to be removed entirely in favour of
`StatusButton`.
This commit replaces the usages of `StyledButton` with `StatusButton`
This is a new form control component to select colors for wallet
accounts. It will replace the currently used `ColorSelect` in the
Status Desktop application so it aligns with the new designs.
Closes#1497
This introduces a new component to render Addresses that can be
expanded as well as copied using `CopyToClipBoardButton`.
While there's already an `Address` component that allows for expansion,
it doesn't give us control over it's look and feel and, should rather
be a `Button` anyways.
There's also cases in the application where we render a collapsed address
and don't allow for expanding it. In such cases, we might not want/need
a button at all.
Might make sense to introduce a separate address component that just shows
a collapsed address without any behaviour, which can then be used inside
`StatusExapandableAddress`.
Closes#1633
Setting the default currency through the UI doesn't work because of a `MouseArea` that
is masking the an underlying `StatusRadioButton` which will tricker the default currency
change.
This commit enhances the `MouseArea` to trigger the default currency change and it
also ensures the UI is responding accordingly. Namely that the new default currency
is correcly selected in the list of currencies.
There's also a little change in the background hover color so it works well across
light and dark themes.
Fixes#1632
This commit does a couple of things:
- It changes a label in the wallet menu from "Add/remove Token" to "Manage Assets"
as it has been designed
- It changes the asset list so a hover state could be introduced. Previously there
was no visual effect or response to mouse hover on asset items
- It improves usability of the asset list by making an entire asset item
clickable to toggle the asset in the wallet. This was not possible before.
Users had to click the checkbox achieve this effect
Closes#1631
`StyledButton` is considered obsolete and by using `StatusButton` we're getting
the expected and correct look & feel of buttons by default.
Closes#1627
- Account color is used in list hightlight, separator and tabs
- Popup fields are cleared when opened
- Account color is randomized when popup is opened
- Show scrollbars in asset list if needed
- Show scrollbars in account list if needed
- Fix margin between assets
- Add symbol to asset amounts
- Stop scrolling at element bounds
The transaction component's `reset` functionality was meant ot reset a form when the modal was closed. It was difficult to manage and added extra overhead for each additional transaction modal created.
Instead of using reset functions, we can use Loaders to load and destroy the modal's as they are opened and closed. We do not need to keep them in memory and then also reset their functions. It creates a smaller memory footprint to destroy the object and reload on open.
feat: load gas prediction prices asynchronously
We were previously displaying an address in the "to" field for TransactionPreview. Instead, this is meant to be a contact view.
- Fix ContactSelector to trigger selectedContactChanged
- Fix RecipientSelector > ContactSelector to trigger resolveEns from outside call to prevent infinite loop from the above fix
- Add alias to pre-selected contact for the Contact view of TransactionPreview
- Add option to change debounce delay so that when values are pre-selected (readonly), there is no delay before resolution.
- Fix missing tx data param in walletModel.estimateGas
I noticed that the 1:1 chat commands were not able to send token transactions due to "intrinsic gas too low" error. I quickly realised there there were a few components missing, which have been fixed.
*feat: update the 1:1 chat commands transaction modal to allow editing of the from account and network fee*
The TransactionStackGroup was updated slightly to allow manual control of back/next actions.
Fixes#870.
*fix: Create distinct modal transaction actions*
Previously, adding `Connection`s for the `walletModel.transactionWasSent` signal in different dialogs would cause the signal to be handled in the wrong dialog. The solution was to pass a `uuid` from the requesting dialog, and include the `uuid` in the response, so that only requests that were requested from the dialog would be handled.
*fix: update 1:1 translations*
All the translations were not being translated for me. I noticed that they did not exist in the `.ts` translation files either.
- If the count matches the required amount a tick will be included next the count
- The format is "✓ 12 words"
- This commit also fixes the text color when in dark in the wallet add new account modal
Currently, exceptions thrown during transactions or gas estimation that were spawned in another thread are not being propagated, due to a limitation in nim (see https://nim-lang.org/docs/manual_experimental.html#parallel-amp-spawn).
This means any exceptions from status-go were not propagated correctly and would cause the app to crash. This includes entering the wrong password when trying to send a transaction.
The issue was addressed by passing a `success` variable by reference, which is set to false if an exception was thrown by status-go.
Fixes#788.
Fixes#853.
Fixes#856.
refactor: gas estimation and transaction sends have been abstracted to allow calling `estimateGas`, `send`, and `call` on the contract method (similar to the web3 API).
Moved sticker pack gas estimation and purchase tx over to the new API
*Sticker purchase:*
- gas estimate is done using new API and debounced using a timer
*Wallet send transaction:*
- tokens can now be sent
- gas is estimated correctly for a token tx, and debounced using a timer
***NOTE***
1. If attempting to send tokens on testnet, you must use a custom token as the token addresses in the pre-built list are for mainnet and will not work on testnet.
2. The new API should support all existing gas estimates, send txs, and calls. The loading of sticker pack data, balance, count, purchased sticker packs, etc, can be moved over to the new API. Almost all of the `eth_sendTransaction`, `eth_gasEstimate`, and `eth_call` could be move over as well (that's the idea at least).
This commit extends the AddressInput to perform ENS lookups when valid
ENS values are entered. The lookup happens asynchronously, so we show a loading
indicator as the request is happening.
Closes#790
- Determine if the recent transaction history is being fetched or available before obtaining the first 20 transactions
- On account change, reset the selected tab to show the asset list
- Collectibles were kinda pixelated/blurry (not anymore)
Fixes#806
Add gas estimate for sticker pack purchase.
Update transaction for sticker pack purchase.
Add GasValidator component which validates gas is selected correctly and displays an error message if not. This component is not visible until it is not valid (at which point the valdiation error message is displayed).
In a future PR, need to:
1. estimate gas for token txfer (sendTransaction) via a normalised method for estimating gas for EthSend
2. move sticker pack purchase to use an EthSend object so gas can be estimated and tx sent
Richard Ramos
Eric Mastro
Pascal Precht
Jonathan Rainville
Iuri Matias
ace-smart
hydrogen
