fix#8786
- multiaccount recovery wasn't saving the root key properly
- this resulted in the impossibility to add new accounts in the wallet
Signed-off-by: yenda <eric@status.im>
This commit does a few things:
1) Move messages to status-go
2) Use message-id computed from status-go
3) Remove old replies
Old message id was used for compatibility of replies with older clients.
Given that v1 is breaking, this is not needed anymore and simplifies
moving messages to status-go. No protocol/data-store change is made, to minimize
changes.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
Contacts are now in status-go, no migration of contacts is provided so
all contacts will be lost upon installing this build.
I have left the initialization of filters a bit sketchy (we wait that
load-filters is called twice), as the next step will be to avoid calling
load-filters altogether, as now that both contacts & chats are in
status-go, there's no reason to call it from status-react, and can be
called directly from status-go on loading.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
This commit moves chats to status-go.
I have changed the logic to load all chats in one go for simplicity and
while that might have a performance impact, I think it's premature to
optimize this flow as there will be more changes to the login flow.
Also currently this is likely to be slower as we need to wait for the
status-service to be initialized, as well as realm.
No migration is provided as we are past the point of no return, so by
installing this version you will lose your chats.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
Currently on some devices there are still some legacy chats(?) that are
one-to-one but don't have a public key as an id (transactor,demo-bot).
We were wrongly sending those to status-go to create filters.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
This commits changes the behavior to read from a signal instead of
polling each filter.
We receive a signal from status-go every 0.3 seconds, only if new
messages are received. We receive a single signal for all the chats, and
we don't dispatch anymore on every message.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
This commit moves the management of installations to status-go, and
migrates the data from realm.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
All the code has been implemented in statusgo: status-im/status-go#1466
Basically all the whisper filter management is done at that level.
Technical description
On startup we load all chats and send a list of them to status go:
For a public chat: {:chatId "status"}, we create a single filter, based on the name of the chat.
For each contact added by us, each user in a group chat and each one to one chat open, we send:
{:chatId "0x", :oneToOne true}. This will create a chats, to listen to their contact code.
Any previously negotiated topic is also returned.
Once loaded, we create our filters, and upsert the mailserver topics, both of which are solely based on the filters loaded.
In order to remove a chat, we delete/stopwatching first the the filter in status-react and then ask status-go to remove the filter. For a public chat we always remove, for a one-to-one we remove only if the user is not in our contacts, or in a group chat or we have a chat open. Negotiated topics are never removed, as otherwise the other user won't be able to contact us anymore.
On stopping whisper we don't have to ask status-go to remove filters as they are removed automatically.
Some more logic can be pushed in status-go, but that will be in subsequent PRs.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
- replace web3-prototype wherever possible
- currently only the money namespace is left
for future refactoring, the ideal solution
would be to use strings for big numbers all
the time and only convert for arithmetic operations
- use json-rpc call to replace trivial web3 calls
Signed-off-by: yenda <eric@status.im>
- upgrade to realm 2.28 to benefit from perf improvements
- remove user-statuses and replace by seen and outgoing-status fields
to get rid of a lot of bloat queries and computations
- remove unused seen message, bottom-infos
- remove unused fields in transport schema
- use objectForPrimaryKey whenever possible instead of get by field
Signed-off-by: yenda <eric@status.im>
Connect to stubs of status-go protocol API, behind the flag. Since status-go isn't updated yet, setting this flag will break the app.
What needs to be tested is no regressions in a normal mode.
Signed-off-by: Igor Mandrigin <i@mandrigin.ru>
the defn macro knows register the function as an events under the
keywords provided in the :events key of the attributes map. It also
adds the interceptors provided in the :interceptors map
exemple:
```clojure
(fx/defn hello4
{:doc "this function is useless as well"
:events [:test/valid1 :test/valid2]}
[{:keys [db]} b]
{:db (assoc db :a b) :b (:a db)})
```
Signed-off-by: yenda <eric@status.im>
move utils.ethereum.tokens to ethereum.tokens
move utils.ethereum.abi-spec to ethereum.abi-spec
move utils.ethereum.core to ethereum.core
move utils.ethereum.eip165 to ethereum.eip165
move utils.ethereum.eip55 to ethereum.eip55
move utils.ethereum.eip681 to ethereum.eip681
move utils.ethereum.ens to ethereum.ens
move utils.ethereum.erc721 to ethereum.erc721
move utils.ethereum.mnemonics to ethereum.mnemonics
move utils.ethereum.resolver to ethereum.resolver
move utils.ethereum.macros to ethereum.macros
Signed-off-by: yenda <eric@status.im>
- introduce json-rpc namespace, which provides `call` and `eth-call`,
a generic way of calling a json-rpc method taking care of conversions
and error handling
- remove web3 usage from wallet
- clean up effects, reducing the amount of computations when login in
`wallet-autoconfig-token` is a very expensive call on mainnet
because it checks the balance of every known token.
it is called:
- when wallet is refreshed by pulling
- when user goes on any wallet screen
this PR changes that by:
- calling it only when the wallet is initialized and there is no
visible-token configuration
it only calls update-wallet when a new transaction arrives
- remove the transaction fetching loop entirely to rely only on subscription
for live transactions and token transfer updates
- fetch token transfers history via etherscan API to lift the 100000 blocks
limit on token transfers history
- inbound token transfers are catched via a filter on ethlogs
- outbound token transfers and other transactions are catched by filtering
transaction in current block that have the wallet address as to or from field
- removes fetching of last 100000 blocks of token transfers from
the wallet pull loop
- fetches the last 100000 blocks of token transfers at startup
- replaces pulling by subscriptions to ethlogs for token transfers
This PR is part of network incentivisation. It adds a way for a client
to pull nodes from a contract.
This is done by selecting the `eth.contract` fleet. If that is selected
on login it will fetch nodes from a contract and pass them to status-go.
If these can't be fetched, it will default to `eth.beta`.
Currently contract information are hard-coded, but eventually the user
will be able to add their own (probably).
Toggled off in release.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
[#7454] fix add basic copy to public chat empty screen state + chat messages-views intro screens for all chats
Signed-off-by: Igor Mandrigin <i@mandrigin.ru>
- support for ipfs only
- provides fns to encode and decode contenthashes as defined in EIP1577
- provides cat fx to retrieve contenthash
Signed-off-by: yenda <eric@status.im>
Sometimes it happens that the expired signal is received while the
there's a new request in flight.
This happens in cases such as:
1) We send a request (A)
2) We get disconnected from the mailserver
3) We connect to a new mailserver
4) We send a request (B)
5) We receive an expired signal for A
In such cases the request should not be retried or counted as a failure.
Signed-off-by: Igor Mandrigin <i@mandrigin.ru>
Currently the separate topic was not used, as it's a bit tricky to
coordinate when multiple devices from different versions are present,
with the partitioned topic, probably this optimisation is not necessary
anymore, so removing this for now.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
When we are offline, we don't try to change mailserver, and we don't
show a pop up to the user, as it is not that the mailserver is not
working, we are just offline.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
The denormalized-clock-value was erroneously set to the one of the last
message received. This meant that on chats were the clock-value raced
ahead of the timestamp (#status), a message from the mailserver or a
message from someone with an old clock-value would basically make those
messages be sorted in the past.
The correct behavior is that last-clock-value for a given chat should be
the maximum last clock value ever seen for that chat.
Signed-off-by: Andrea Maria Piana <andrea.maria.piana@gmail.com>
Pedro Pombeiro
Andrea Maria Piana
Andrey Shovkoplyas
yenda
Dmitry Novotochinov
Vitaliy Vlasov
Julien Eluard
Volodymyr Kozieiev
Igor Mandrigin
Roman Volosovskyi
tbenr
bitsikka