We were previously displaying an address in the "to" field for TransactionPreview. Instead, this is meant to be a contact view.
- Fix ContactSelector to trigger selectedContactChanged
- Fix RecipientSelector > ContactSelector to trigger resolveEns from outside call to prevent infinite loop from the above fix
- Add alias to pre-selected contact for the Contact view of TransactionPreview
- Add option to change debounce delay so that when values are pre-selected (readonly), there is no delay before resolution.
- Fix missing tx data param in walletModel.estimateGas
fix: SignTransactionModal - set default focused account when none is found
refactor: move token lookup from QML to nim in the toMessage procedure.
fix: 1:1 tx requests - handle case where token contract is not found (ie sending SNT from mainnet and receiving message on testnet)
feat: error checking for building a token transaction
feat: TransactionPreview - add a validation check that disallows continuation if the selected "from" account has insufficient funds
I noticed that the 1:1 chat commands were not able to send token transactions due to "intrinsic gas too low" error. I quickly realised there there were a few components missing, which have been fixed.
*feat: update the 1:1 chat commands transaction modal to allow editing of the from account and network fee*
The TransactionStackGroup was updated slightly to allow manual control of back/next actions.
Fixes#870.
*fix: Create distinct modal transaction actions*
Previously, adding `Connection`s for the `walletModel.transactionWasSent` signal in different dialogs would cause the signal to be handled in the wrong dialog. The solution was to pass a `uuid` from the requesting dialog, and include the `uuid` in the response, so that only requests that were requested from the dialog would be handled.
*fix: update 1:1 translations*
All the translations were not being translated for me. I noticed that they did not exist in the `.ts` translation files either.
- Create privilege dialogs dynamically for each privilege requested
- Check if a privilege has been granted before to determine if dialog must be shown or not
- If dapp is allowed to use privilege, save it in the settings
- Create privilege dialogs dynamically for each privilege requested
- Check if a privilege has been granted before to determine if dialog must be shown or not
- If dapp is allowed to use privilege, save it in the settings
- Changed WebView to WebEngineView
- Created a new controller/view for the web3 provider
- Created a private profile
- Created a channel for comms browser - qml
All tokens are now implemented as a strongly-typed Contract, Erc20Contract, or Erc721Contract. This prevents having two separate lists of overlapping tokens/contracts and normalises how to retreive the current SNT contract (depending on the network).
Fixes: #926.
Gas estimations were not being decoded correctly (indicated with "error getting gas price predictions" in the console) and were preventing transaction dialogs from continuing past the step containing the GasSelector component. This affected mainnet only, because in testnet we have hardcoded gas prices (for when the gas prices on mainnet are insane) which is why it was not apparent in testnet.
fix: Contract address not showing correctly
This was caused by `getStickerMarketContractAddress` being moved to `utilsView` but not updated in QML
Closes: #586
Previously, loading sticker packs and stickers would show a lot of blank and non-interactive content.
Now, stickers and sticker packs have grey circles to indicate loading. Additionally, the sticker market button (+) shows a loading indicator until the sticker packs are loaded.
Supports system dark mode. Changes the user appearance setting to a 3-way setting of System, Light, Dark.
New accounts will have their appearance setting set to "System", which uses the system setting to determine if dark mode should be applied.
Breaking change: Users who had their settings on Light Theme, will now get the system theme (light or dark). Users who had their theme set to Dark, will now get the Light theme.
At startup, the onboarding screens will have the system-level setting of dark mode applied or not. Once, logged in, the user settings will be applied.
## Note
An appearance setting of "System" is not dynamic to the system-level setting. This means that if a user has "System" set for their appearance (and ie, the user has light mode set), and then user then changes their system setting from light to dark, the app will not respond until it is restarted. This is due to a limitation of Qt not having a reliable way to propagate these changes to QML.
Use nim-web3 library and remove internal encoding funcs that were copied from nim-web3.
Remove all instances of EthAddress (and therefore eth/common/eth_types imports)
Currently, exceptions thrown during transactions or gas estimation that were spawned in another thread are not being propagated, due to a limitation in nim (see https://nim-lang.org/docs/manual_experimental.html#parallel-amp-spawn).
This means any exceptions from status-go were not propagated correctly and would cause the app to crash. This includes entering the wrong password when trying to send a transaction.
The issue was addressed by passing a `success` variable by reference, which is set to false if an exception was thrown by status-go.
This commit address two bugs:
1. When importing a mnemonic, the resulting "master" account and its address
was used as account to be stored as opposed to its derived default account
2. The account was stored in the wrong path, resulting in status not being able
to locate accounts when sending transactions.
Fixes#787
Fixes: #815
Previously, only stickers purchased from the main status account were shown. Now, stickers purchased from any of the accounts are shown.
Accounts include any accounts returned by `accounts_getAccounts` and are non-chat accounts.
Fixes#788.
Fixes#853.
Fixes#856.
refactor: gas estimation and transaction sends have been abstracted to allow calling `estimateGas`, `send`, and `call` on the contract method (similar to the web3 API).
Moved sticker pack gas estimation and purchase tx over to the new API
*Sticker purchase:*
- gas estimate is done using new API and debounced using a timer
*Wallet send transaction:*
- tokens can now be sent
- gas is estimated correctly for a token tx, and debounced using a timer
***NOTE***
1. If attempting to send tokens on testnet, you must use a custom token as the token addresses in the pre-built list are for mainnet and will not work on testnet.
2. The new API should support all existing gas estimates, send txs, and calls. The loading of sticker pack data, balance, count, purchased sticker packs, etc, can be moved over to the new API. Almost all of the `eth_sendTransaction`, `eth_gasEstimate`, and `eth_call` could be move over as well (that's the idea at least).
This commit extends the AddressInput to perform ENS lookups when valid
ENS values are entered. The lookup happens asynchronously, so we show a loading
indicator as the request is happening.
Closes#790
- Determine if the recent transaction history is being fetched or available before obtaining the first 20 transactions
- On account change, reset the selected tab to show the asset list
- Collectibles were kinda pixelated/blurry (not anymore)
Fixes#806
Add gas estimate for sticker pack purchase.
Update transaction for sticker pack purchase.
Add GasValidator component which validates gas is selected correctly and displays an error message if not. This component is not visible until it is not valid (at which point the valdiation error message is displayed).
In a future PR, need to:
1. estimate gas for token txfer (sendTransaction) via a normalised method for estimating gas for EthSend
2. move sticker pack purchase to use an EthSend object so gas can be estimated and tx sent
Prior to this commit, the app would request messages from the last
24 hours for all joined channels.
The changes made here ensure that messages since the *last* request
are requested. The last request for each topic/chat is stored in the
nodes mailserver topics.
When no channels are joined, the default is still 24 hours, however,
as soon as a channel is joined, the last request time will be updated
and honored in the next request.
Fixes#669.
Composes all tx components to create a send transaction modal for the wallet.
1. Add a reusable TransactionStackView component that wraps a StackView component to show the screens of the Send Tx modal and handles back/forward/reset functionality.
2. Add a reusable TransactionStackGroup which holds tx components and allows modal header and button text to be defined and handles validation for all child components.
3. Add an isValid property to all tx comps for pristine validation state.
4. Reset all components in modal once modal is closed. This consists of a `resetInternal` function that each component should implement to reinstate its original starting state, and a `reset` function that parent components can use to reinstate the overridden properties.
5. Tx error handling to display either a StatusGo error message in the dialog, or wrong password in the TransactionSigner.
6. Fix ReceiveModal to allow for pre-selected account based on current wallet account.
7. Add focused border colour to Input component.
8. Fix issue with last TransactionStackGroup input not being able to obtain focus.
9. Fix fiatBalance not appearing on initial load on AccountSelector.
10. Fix selected asset updated properly when assets changed in the AssetSelector component.
11. AccountSelector is pre-populated with selected wallet account. Supporting work on the components has been done to suppor this.
12. Changing accounts in the "from account" updates the asset balances in the AssetAndAmountInput component.
13. Move validation from ContactSelector to the Select component.
1. Test sending of tokens. This requires that tokens contracts are setup on testnet. Right now, they are set up for contract addresses on mainnet.
2. Loading state once transaction is sent. Button in modal needs to move to a loading state and the "toast" messages in the wallet need to appear informaing user of tx progress.
3. Need to clarify (and implement?) support of ENS names in the AddressInput. It appears that ENS names could be resolved. This would be a long operation and require some kind of UI loading indication.
4. Wallet balances need to be updated on every block, so for example, sending funds between accounts I should be able to see the balance updated in real time.
1. Sending to a contact currently doesn't work because the ContactSelector component selects the Contact's whipser key, instead of his/her wallet address. May need to figure out how this is done in status-react. As it stands, attempting to send to a contact will crash the app.
2. Sending *from* an imported account does not work, with an error from StatusGo `cannot locate account for address: 0x123...`
When entering a user name like `@Pascal` it wouldn't be properly replaced
with the pubKey of `pascal.stateofus.eth` since it was comparing to `@pascal`
This commit ensures simple user name mentions are properly matched against
their ens names regardles of their case.
Fixes part of #769
- link color in compact mode
- channel links did not have a #
- clicking on a mention should show that profile
- The AddChat button image didn't reposition when closing
Necessary cases are:
- Onboarding to show the list of 5 accounts
- In QML when we show it to the user for the backup
- Change it to a Loader, so the component and its memory is cleaned when closed
When tokens are added/removed, the asset list in the AssetAndAmountInput is updated.
The selected asset can be specified by the parent component which is needed for things like sticker market where we need to set SNT as the fixed token.
Improved the validation for the component:
- validate() can be called externally
- validation display is handled internally and messages can be customised
- validation error messages are handled by the Input component and validation UX is consistent with other tx components
- Added an nsbp in front of paragraphs, otherwise the alignment property was ignored
- Enabled richformat for channel list to avoid emoji overlap in last message
- Show welcome page only when there are no ens names registered
- If you already have an ens username for the current account, connect and mark it as preferred name
- State machine navigation
Fixes#670.
Component spec based on https://www.notion.so/emizzle/Wallet-transaction-components-2003b78a8d0d41c4ab3d21eb2496fb20.
Changes the current Select shared component to a model databound component. This means we can bind directly to `QAbstractListModel`'s coming from Nim instead of needing manipulating the data in to javascript objects. The changes to the Select component will be used for the upcoming Asset selector shared component.
This introduces the ability to:
- list search existing contacts
- block contacts
- unblock contacts
- list blocked contacts
- remove contacts
- search and add contacts
Closes#608
Richard Ramos
Pascal Precht
emizzle
Iuri Matias
Jonathan Rainville
hydr063n
chainvisions
Michael Bradley, Jr
