Currently, exceptions thrown during transactions or gas estimation that were spawned in another thread are not being propagated, due to a limitation in nim (see https://nim-lang.org/docs/manual_experimental.html#parallel-amp-spawn).
This means any exceptions from status-go were not propagated correctly and would cause the app to crash. This includes entering the wrong password when trying to send a transaction.
The issue was addressed by passing a `success` variable by reference, which is set to false if an exception was thrown by status-go.
This commit address two bugs:
1. When importing a mnemonic, the resulting "master" account and its address
was used as account to be stored as opposed to its derived default account
2. The account was stored in the wrong path, resulting in status not being able
to locate accounts when sending transactions.
Fixes#787
Fixes: #815
Previously, only stickers purchased from the main status account were shown. Now, stickers purchased from any of the accounts are shown.
Accounts include any accounts returned by `accounts_getAccounts` and are non-chat accounts.
Fixes#788.
Fixes#853.
Fixes#856.
refactor: gas estimation and transaction sends have been abstracted to allow calling `estimateGas`, `send`, and `call` on the contract method (similar to the web3 API).
Moved sticker pack gas estimation and purchase tx over to the new API
*Sticker purchase:*
- gas estimate is done using new API and debounced using a timer
*Wallet send transaction:*
- tokens can now be sent
- gas is estimated correctly for a token tx, and debounced using a timer
***NOTE***
1. If attempting to send tokens on testnet, you must use a custom token as the token addresses in the pre-built list are for mainnet and will not work on testnet.
2. The new API should support all existing gas estimates, send txs, and calls. The loading of sticker pack data, balance, count, purchased sticker packs, etc, can be moved over to the new API. Almost all of the `eth_sendTransaction`, `eth_gasEstimate`, and `eth_call` could be move over as well (that's the idea at least).
This commit extends the AddressInput to perform ENS lookups when valid
ENS values are entered. The lookup happens asynchronously, so we show a loading
indicator as the request is happening.
Closes#790
- Determine if the recent transaction history is being fetched or available before obtaining the first 20 transactions
- On account change, reset the selected tab to show the asset list
- Collectibles were kinda pixelated/blurry (not anymore)
Fixes#806
Add gas estimate for sticker pack purchase.
Update transaction for sticker pack purchase.
Add GasValidator component which validates gas is selected correctly and displays an error message if not. This component is not visible until it is not valid (at which point the valdiation error message is displayed).
In a future PR, need to:
1. estimate gas for token txfer (sendTransaction) via a normalised method for estimating gas for EthSend
2. move sticker pack purchase to use an EthSend object so gas can be estimated and tx sent
Prior to this commit, the app would request messages from the last
24 hours for all joined channels.
The changes made here ensure that messages since the *last* request
are requested. The last request for each topic/chat is stored in the
nodes mailserver topics.
When no channels are joined, the default is still 24 hours, however,
as soon as a channel is joined, the last request time will be updated
and honored in the next request.
Fixes#669.
Composes all tx components to create a send transaction modal for the wallet.
1. Add a reusable TransactionStackView component that wraps a StackView component to show the screens of the Send Tx modal and handles back/forward/reset functionality.
2. Add a reusable TransactionStackGroup which holds tx components and allows modal header and button text to be defined and handles validation for all child components.
3. Add an isValid property to all tx comps for pristine validation state.
4. Reset all components in modal once modal is closed. This consists of a `resetInternal` function that each component should implement to reinstate its original starting state, and a `reset` function that parent components can use to reinstate the overridden properties.
5. Tx error handling to display either a StatusGo error message in the dialog, or wrong password in the TransactionSigner.
6. Fix ReceiveModal to allow for pre-selected account based on current wallet account.
7. Add focused border colour to Input component.
8. Fix issue with last TransactionStackGroup input not being able to obtain focus.
9. Fix fiatBalance not appearing on initial load on AccountSelector.
10. Fix selected asset updated properly when assets changed in the AssetSelector component.
11. AccountSelector is pre-populated with selected wallet account. Supporting work on the components has been done to suppor this.
12. Changing accounts in the "from account" updates the asset balances in the AssetAndAmountInput component.
13. Move validation from ContactSelector to the Select component.
1. Test sending of tokens. This requires that tokens contracts are setup on testnet. Right now, they are set up for contract addresses on mainnet.
2. Loading state once transaction is sent. Button in modal needs to move to a loading state and the "toast" messages in the wallet need to appear informaing user of tx progress.
3. Need to clarify (and implement?) support of ENS names in the AddressInput. It appears that ENS names could be resolved. This would be a long operation and require some kind of UI loading indication.
4. Wallet balances need to be updated on every block, so for example, sending funds between accounts I should be able to see the balance updated in real time.
1. Sending to a contact currently doesn't work because the ContactSelector component selects the Contact's whipser key, instead of his/her wallet address. May need to figure out how this is done in status-react. As it stands, attempting to send to a contact will crash the app.
2. Sending *from* an imported account does not work, with an error from StatusGo `cannot locate account for address: 0x123...`
When entering a user name like `@Pascal` it wouldn't be properly replaced
with the pubKey of `pascal.stateofus.eth` since it was comparing to `@pascal`
This commit ensures simple user name mentions are properly matched against
their ens names regardles of their case.
Fixes part of #769
- link color in compact mode
- channel links did not have a #
- clicking on a mention should show that profile
- The AddChat button image didn't reposition when closing
Necessary cases are:
- Onboarding to show the list of 5 accounts
- In QML when we show it to the user for the backup
- Change it to a Loader, so the component and its memory is cleaned when closed
When tokens are added/removed, the asset list in the AssetAndAmountInput is updated.
The selected asset can be specified by the parent component which is needed for things like sticker market where we need to set SNT as the fixed token.
Improved the validation for the component:
- validate() can be called externally
- validation display is handled internally and messages can be customised
- validation error messages are handled by the Input component and validation UX is consistent with other tx components
- Added an nsbp in front of paragraphs, otherwise the alignment property was ignored
- Enabled richformat for channel list to avoid emoji overlap in last message
- Show welcome page only when there are no ens names registered
- If you already have an ens username for the current account, connect and mark it as preferred name
- State machine navigation
Fixes#670.
Component spec based on https://www.notion.so/emizzle/Wallet-transaction-components-2003b78a8d0d41c4ab3d21eb2496fb20.
Changes the current Select shared component to a model databound component. This means we can bind directly to `QAbstractListModel`'s coming from Nim instead of needing manipulating the data in to javascript objects. The changes to the Select component will be used for the upcoming Asset selector shared component.
This introduces the ability to:
- list search existing contacts
- block contacts
- unblock contacts
- list blocked contacts
- remove contacts
- search and add contacts
Closes#608
Adds settings API for getting current network details.
Uses the current network details to display the correct etherscan link in QML (etherscan URL is a setting in the current network settings).
Implement a `pkg-windows` target that ultimately results in `Status.zip` being
written to `pkg/`.
Note: this commit does not introduce code signing for the Windows build since
that piece is still a work in progress.
`pkg-windows` creates a portable folder in `tmp/windows/dist` with the help of
[`windeployqt`][windeployqt], which copies the needed portions of Qt into the
folder.
Since DLL resolution is relatively inflexible, a launcher `Status.exe` is
created at the top-level of the folder; the launcher opens `bin/Status.exe`
while adding the portable folder's `bin/` to the `PATH`, allowing
`bin/Status.exe` to resolve the DLLs in that folder.
A few additional tools need to be installed (e.g. with [scoop][scoop]) and
availble in `PATH`:
* 7-zip
* dos2unix (provides unix2dos)
* findutils
* go
* rcedit
* wget
The above list builds on the tools list in PR #521, and the other requirements
and instructions in that PR's description still apply.
**Why not build an installer?**
When starting work on packaging for the Windows build, my initial plan was to
build an installer, and for that purpose I researched the [WiX Toolset][wix],
the [Qt Installer Framework][qtif], and some other options.
I found that building an installer is a bit complex. I then recalled, from
personal experience, that [Cmder][cmder]'s [Mini download][mini] is
installer-less. You simply unzip the download and place the `cmder_mini` folder
wherever you prefer. Such an approach was also recommended to me in one of the
Nim language's community chats.
In addition to being simpler, the installer-less approach also gives
installation of Status Desktop a lower profile than an installer-application
would since nothing is written to the Windows registry, added to the *Add or
remove programs* list, etc. I think that's a benefit given the privacy-security
focus of Status, but others may feel differently so please provide feedback on
this point!
[windeployqt]: https://doc.qt.io/qt-5/windows-deployment.html
[scoop]: https://scoop.sh/
[wix]: https://wixtoolset.org/
[qtif]: https://doc.qt.io/qtinstallerframework/index.html
[cmder]: https://cmder.net/
[mini]: https://github.com/cmderdev/cmder/releases/download/v1.3.15/cmder_mini.zip
Allow switching to Ropsten by flipping a toggle switch in Profile > Advanced settings.
When switching networks, note that installed stickers will be uninstalled, and recent stickers will be removed. Sticker packs can be reinstalled after login. Purchased sticker packs will not need to be re-purchased, but will need to be re-installed.
Mailserver fleet information will **not** be updated. This can be controlled by a separate (undeveloped yet) setting.
Sticker pack details retreived from contract:
- pack data decoded from contract response
- data contains contentHash which, once decoded, contains an IPFS identifier
- futher pack data in EDN format is downloaded from IPFS
- the EDN info is decoded in to a StickerPack
List of available packs from contract are obtained separately from list of installed contracts (stored as a setting in Status-go).
Sticker market contains dynamic list of sticker packs. The sticker button shown for each pack has all states defined (in the design) for all UI states (ie bought, free, installed, pending, etc)
Add modal popup showing sticker pack details and list of stickers to be un/installed. Contains a "larger" version of the sticker pack button with many differnt UI states defined.
Uninstallation of a sticker pack removes those sticker pack's stickers from the recent sticker list and persists the list
Simplify the view model by including stickers, instead of setting an "activeStickerPackId" property. This allowed for display of sticker pack stickers to be displayed in the modal popup separately from the sticker packs shown in the market.
If the environment variable `NIM_STATUS_CLIENT_DEV` is not empty then the
`./data` dir is created/used relative to the current working directory, as was
always the case prior to the changes introduced in this commit.
`NIM_STATUS_CLIENT_DEV` is set to `t` when doing `make run`. To get the
production behavior in development do:
```
$ NIM_STATUS_CLIENT_DEV="" make run
```
or on Windows in a Bash shell:
```
$ NIM_STATUS_CLIENT_DEV="" mingw32-make run
```
Closes#391
Add sticker popup
Add send sticker message
Add ability to select sticker pack and show stickers for pack with scroll
1. Sticker history
2. Install sticker packs
3. Sticker market
1. Sticker packs are installed on app start up until installation of sticker pack functionality is added
2. Optimisations such as preloading images to be done so that sticker images are not downloaded each time.
Richard Ramos
Jonathan Rainville
Michael Bradley, Jr
hydr063n
Pascal Precht
emizzle
Iuri Matias
decanus
Ștefan Talpalaru
