1. Hiding DApps button on not supported wallet account selection
2. Filtering DApps in connected dApps list based on account selection
closes: #15589closes: #15647
- display additional beta information as a tooltip
- don't overlap the Beta badge with the unread msg indicator
- some minor cleanups & fixes
Fixes#15795Fixes#15929
- remove the nested unneeded ScrollView
- cleanups and fixes in mocked models and stores to unbreak showing the
networks/routing in storybook
Fixes#15902
- format Big decimal numbers correctly according to the current locale;
some precisions loss is tolerated here for the display purposes
- fixes wrong decimal separators in some places and aligns with the
standard in terms of number of decimals, as everywhere else in the app
Fixes#15612Fixes#15790
- partially reuse the already available Global/Popups methods to hide
assets (which also emit proper notifications); those are needed as
anotehr shared modal from Popups uses it too (may come from outside of
Wallet)
- some warnings cleanup in the controller
Fixes#15777
Add a new NetworkChecker QObject to StatusQ to be used in checking
internet connection status. This is used by the WebEngineLoader
to only allow loading of web pages when there is an active internet
to cover for a corner case on MacOS where the internet connection is
not reestablished if the WebEngineView was loaded without an active
internet connection.
Closes: #15598, #15806
- set the correct widths and elide mode
- fixup the visuals of the NetworkFilter combo box (to disable it w/o
making it look disabled)
- fix passing the connection status down to DAppCard
* Disable the send button when the router returns errors.
* Display a red arrow on networks lacking sufficient gas for the transaction.
Closes#15700#15701
- This commit temporarily disables the MaxAmount button in the `SwapInputPanel` and `SendModal` components.
- The MaxAmount button will be reintroduced with the correct behavior in issue #15709 for the 2.31 release.
closes: #15710
The requirements are that we allow all available networks
to Wallet Connect
Also temporarily disable the tests that validate selection working
Closes: #15638
The static url validation state `Pairing.errors.ok` was directly
responsible for the validation action in UX. With current change
the validation is now based on the pairing response. When the
pairing response is received the UX is validated and after half second
UX is moved to the approval process (`ConnectedDAppModal`)
Closes: #15591
We have no easy way to check the protocol and provide a customized
error message. Therefore we generalizes the error message to network
not supported.
Closes: #15649
- just use the `model.stickers` to access the submodel, remove dead NIM
code
- make sure that the installed sticker packs are loaded, even before
first opening the Sticker popup
- StatusStickerMarket: fix the back button
- fix launching the Buy stickers modal (SendModal)
Fixes#15718
- when we arrive to a point when all input params are empty, disable the
middle Exchange button
- add QML test for the Exchange button enabled/disabled state
Fixes#15751
Add helper function to filter out dApps with sessions that don't
have any supported account in the available accounts list.
Use helper function to filter out dApps connected on other profiles
when listing dApps in the dApps list.
When disconnecting an app only disconnect sessions for the current
profile.
Closes: #14888, #15707
Also
- don't report error in case of status-go returning nil instead
of an empty array.
- fix misleading alias to AmountsArithmetic
- minor improvements requested in previous discussions
Updates: #15707
Adding local setting: metrics_popup_seen
Small refactoring: showing popup from main.qml
Showing popup: 1. on welcome screen, 2. in Settings/Privacy page and 3. after login when the popup has not been shown yet
Issue #15628
Add new settings page for metrics management - Privacy and security
Add popup to enable/disable metrics on Onboarding and Privacy screens
Add MetricsStore in QML
Issue #15490
Reverts changes introduced by 6eeb91 the connector integration
that were loading the SDK asynchronously. Not sure why it isn't working
though.
Closes: #15694
Also differentiate between l1 and l2 fees and check them against the
specific chain balance
Also
- Included tests for the new functionality
- Fixed some inconsistencies in handling types
Updates: #15552
Fixes#15507
Makes sure to enable the network where the owner token was minted before minting or airdroping a token.
This makes sure that the account selector shows the right balance and there is no ETH error before doing the transation
fix#15179 that triggers connection request from client
- Setup the initial architecture for connecting Status-go and UI
screens
- Implement the request Connection popup for Accept or Rejecting
connection
Fixing a bug where the community name is not shown in the `Send` button
Get the collectible community name from the community model for community tokens. Otherwise default to community id.
+ Fix WalletFooter layout when the buttons text exceeds the available width
to squash: Fixing send on owner token - name
1. Show Send Button on wallet footer when all accounts is selected
2. Hide Send Button in collectibles context menu and collectibles details view when the collectible is not owned by the user
3. Disable the Send Button in collectibles context menu and collectibles details view when the collectible is soulbound
to squash: Fine tune send action on collectibles
to squash: Fine tune send on collectibles
to squash: Fine-tune collectibles
Updating the SendModal to receive an accountAddress to preselect the account instead of the account item model
to squash: Fix account selection. by address
The root cause of this issue is the improper computation of the `accountBalance` expression role in the accounts model. Its value depends on another model (`filteredBalancesModel`) and by the time the expression role gets computed the proper `balance ` is not ready in the `filteredBalancesModel`.
This is a quick fix, but maybe the real fix should be restructuring the adapter and the model dependencies. I'd look out for any `ModelUtils` usage and replace it with a declarative approach if possible.
In comparison to the previous version it provides simpler API
and better validation based on AmountValidator.
Old version will be removed after full integration of the new version.
Replace missing methods calls of chart after it was replaced with a different
component.
Update chart on networks change.
Fix data for all chains requested - both test and real networks.
Fix some unrelated qml errors
Compute max fees for transaction related requests and display the
results to user.
Also:
- Add helper to convert from hex (backend) to decimal (frontend) values.
- Add helper to convert from float gwei to hex wei
- Update tests to accommodate for the new dependencies.
Sourcing of account balances is not included therefore the transaction is
allowed to go through even if the account balance is insufficient. An error
will be generated by the backend in this case.
Updates: #15192
Fixes#15614
* feat(StatusQ): add StatusExperimentalTag component and page
* chore(beta): add beta tag to ENS
* chore(beta): add beta tag to Activity tab
* chore(beta): add beta tag to wallet settings
* chore(beta): add beta tag to Notification Center
- Network item hover color, selected item border and background changed to have a better UX and being more accurate to the new design.
- Disabled option of unchecking networks. At least, always one should be selected.
Fixes#15526
Fixes the import popup showing the wrong state. That was because a param was removed from the function, but not from the call to that function, so `true` was passed in `invitationPending` when it shouldn't have.
I also added a call to `spectateCommunity` before the community intro popup so that the community spectated beforee sending the request
Fixes#15382
So there is no easy way from the models and data we currently have in the client to know which account minted the owner token. So the easiest way to help the user is just to catch the error and show a better message.
Description:
Enhanced the SendModal.qml to filter out non-transferable (soulbound) collectibles from the send model. This ensures that only transferable collectibles are displayed when sending.
Changes:
Updated SendModal.qml to include a SortFilterProxyModel with a ValueFilter.
The ValueFilter targets the soulbound role and filters out collectibles with soulbound set to false.
Issue:
Closes#14578
- remove old popup and related components/adaptors
- simplify the API of the Sign/Approve modals to take pre-formatted
amounts as strings
- correct login/auth icon
- SB: make it possible to open the new secondary modals
- SB: fix the `fetchSuggestedRoutes` response handling, pass around the
`uuid` and inject it to the mocked suggested routes
- adjust SB pages and tests
Fixes#15443
* fix(statusProfileNavBarTabButton): Fixed backgound color and ring for StatusNavBarTabButton that's displayed at left bottom of the main window.
Fixed signal typo in CommunityTokensStore.
Closes#15479.
* fix(CommunityTokenStore): fixed signal handler name on qml side.
* feat(icon): show a red dot when we have unread notifications
* feat(windows-icon): update windows icon to have a white border
Fixes#14788Fixes#14855
Adds a red dot on the tray icon if there is an unread message in an unmuted channel or in the activity center
Implemented using the fees from the transaction data sent
by the dApp.
Also fixed the nim status go wrapper to send proper formatted
string as expected on the other side.
Updates: #15192
* feat(WalletConnect): Implement sign request modal
1. Implementing sign request modal based on SignTransactionModalBase
2. Adding storybook page
3. Integrate it in the app
4. Removing DAppRequestModal
5. Update RoundImageWithBadge to preserve aspect ratio between badge and main image
* fix(WalletConnect): Remove unneeded properties from WalletConnectService API
Removing `selectedAccountAddress` and `loginType`. These properties are now passed through DAppsWorkflow API
* fix(WalletConnect): Removing unnecessary changes
* fix(sharedAddress): hide non fully imported accounts from shared address
Fixes#15471
We only filtered out watch only accounts, but we also need to make sure it was a fully imported account, ie an account that is usable, hence why using `canSend`. It is the same property they use in the SendTransaction modal
- Created data transformation file called `WalletAccountsAdaptor` for `SendModal`. Now it contains the owned wallet accounts model data transformations.
- Added common formatting method for short chain ids to some utils and partially removed backend dependency.
- Component name changed to be more precise with what it represents.
- Removed `RootStore` dependency from `Helpers.qml`.
- Removed unnecessary method `lookupAddressObject` from `RootStore`.
- Updated `SendModal` property bindings related to recipient.
- Some activity controller interaction details moved to transactions store instead of being directly in `SendModal`.
- Type enum living in `RecipientSelectorPanel` is moved to `Helpers`. Since it doesn't depends on the specific component and it's used in other global places.
Part of #15208
... and remove particular code for send modal
- derive the footer from the standard `StatusDialogFooter` to reduce
code duplication (drop shadow, divider, margins, etc)
- rename the default button text
- expose the icon name and make it used the correct login/auth type icon
- some minor fixes and cleanups
Fixes#15212
Found out while testing that in some corner cases there will be no
response of error in case of pairing. This is handled now by showing
a generic error message. The implementation is using a timer to handle
this case.
Extend the logic to report errors in the pairing process.
Closes#14676
Extend support for legacy `eth_sign` and `eth_signTypedData`
methods.
Keep the `eth_sign` using the legacy method for compatibility
Use the newly added status-go apis for a safer implementation
of signing typed data by providing chain validation.
Closes: #15361
Registration of QAbstractItemModel* allows to nest submodels, e.g:
SortFitlerProxyModel {
sourceModel: LeftJoinModel { ... }
}
Earlier, it would cause error:
> Cannot assign to property of unknown type "QAbstractItemModel*"
- some minor visual fixes (padding & clear button color)
- make it always paste plain text, eventhough the base component has to
stay RichText
- use it in SendModal->RecipientView
- add a storybook page
- added QML tests
Fixes#15252
- unbreak passing the controller into the adaptor; can't be strongly
typed as that hides all the assets (always returns `false` from the
`visible` property)
- fix selecting account address (var account -> string accountAddress)
- fix the mocked account model to contain the needed `canSend` role, fix
the mocked check function
- fix showing community assets and balance threshold
- Adjusted StatusListItem height to account for scrollbar visibility by adding 16 pixels to contentHeight when tags are visible.
- Set tagsScrollBarVisible to true in TokenListView to ensure the scrollbar is displayed as needed.
fixes: 13620
Changes:
1. Align dialog with Figma design
2. Add new components for round image with badge and connection status tag
3. Add tests
4. Dapps service will now receive wallet `RootStore` as input and reuse existing models with account balance and other necessary info for account selection and chain selection
5. Minor updates in stores
6. Minor updates in WC toast messages to display app domain instead of app url
- create a common base for "sign" transaction popups/modals:
`SignTransactionModalBase`
- add SwapSignModal, deriving from the above common modal base
- add it to StoryBook; integration TBD as part of a different followup
PR
- add QML tests
Fixes#14785
- Disable 'Sort by Date' when timestamps are incomplete.
- Default to 'Alphabetical' sort if date is unavailable.
fixes: #13630
Update status-go submodule to latest commit on develop
Added an optional 'isDisabled' property to the ComboBox model to dynamically control the visibility and interaction of entries based on their state. This enhancement allows for entries to be disabled under certain conditions, improving the UI's adaptability and user interaction.
fixes: #13630
- Added a manual reload button to the WalletHeader to allow users to refresh wallet data on demand.
- Implemented a throttle timer to prevent excessive reloads.
- Show the last reload time.
- Updated UI elements to reflect the reloading state for user feedback.
- Connected the reload button to the backend to trigger the wallet reload functionality.
resolves: #13652
- Added `loadingIndicatorSize` property to `StatusBaseButton` to allow customization of loading indicator size.
- Introduced `mirror` property in `StatusIcon` to support icon mirroring.
resolves: #1365
Fixes#15314
The problem is that we used the `name` property to know if we have an ENS name, but we actually set it to whatever is available, so we need to validate that it's an ENS name
* refactor getters for chainIds and enabledChainIds
* simplify community chainIds getter
* simplify usage of network dto objects
* remove duplicated roles from send area
* rename network model in send module to network route model
- validate input also when pasting via the button (extract to a common
function)
- show the Paste button only when the input is empty and we have sth to
paste actually and prevent it from stealing focus
- upon clicking the Paste button, put focus on the input field
- after pasting, set the cursor past the end of the text
Fixes#14576
Uses status-go's endpoints:
- `wallet_buildTransactions` to format the transaction
- `wallet_signMessage` to sign the transaction
- `wallet_buildRawTransaction` to format the final signed transaction
Updates #15126
- create new dedicated (asset) token selector component
- integrate it into `SwapInputPanel` and `SwapModal`
- add respective SB page and QML tests suite
Fixes#14783
This commit creates a new component NetworkSelectorView and it's implementation will replace the NetworkSelectionView
+ Adding the storybook page
+ Adding tests
This is the first step in refactoring the NetworkFilter, by cleaning the base component that handles the check states.
This component supports multiple configurations:
1. Single selection with or without radio button
2. Multiple selection with or without checkbox
3. Automatic handling of the check state. The component will change the check state based on user clicks
4. Manual handling of the check state. The component will not change the check state, but offers a toggled signal and expects the user to change the check state based on external flows
+ Fix minor bugs
The new account selector expects a generic account model. It will display all the account data if provided, including preferred chains, balance or asset balance. Otherwise it will display only the available data.
The account selector can receive an initial selection based on account address and will provide the current selected address and the current selected model item.
- Unify the account selector between communities and wallet
- Update the account selector to work with addresses instead of model indexes
- Adapt all components using the account selector or the account selection
- Move/reuse qml components involved in the account selector UI
- Remove nim logic used to handle index based account selection.
- Adding storybook page
TLDR: later this should form a basic building block for a new
TokenSelector picker component, potentially replacing the current
HoldingSelector* and TokenListView components (support for collectibles
TBD as part of https://github.com/status-im/status-desktop/issues/15121)
- create reusable `TokenSelectorAssetDelegate` and `TokenSelectorView`
- add corresponding SB page, showcasing the flow/integration and the
separation of concerns between the view, adaptor and delegate layers
- add QML testcase for TokenSelectorView
- don't display crypto symbol for token balances per chain tags
- update the stores and SB pages
- add some missing formatter functions to LocaleUtils and CurrenciesStore
Fixes#14716
Implement infrastructure and integration with status-go to support
general session requests
Supported methods:
- personal_sign
- eth_signTypedData_v4
depends on status-go change that exposes the signing methods
Also
- support hex or utf8 encoding for personal_sign
- format the typed data for display in the modal
Tests are disabled for now, as they are crashing on CI
Close: #14927
Trigger authentication with identity of the request
Track the authentication using the identity and allow only once
Add tests for the new functionality
Minor improvements around the code
Closes#15018
For start support showing sign message only
Support rejecting the request
Storybook integration
Add disabled tests for the main logic and sanity UI tests.
They crash on CI only and work locally on mac. Postponed finding out why
for now.
Closes: #14927
Abstract WalletConnectSDK to make it testable
Implement WC service pairing test
Bring back DAppsWorkflow tests back to life and add a pair modal test
Updates: #14927
* fix(wallet): Renamed KeyPair to key pair throughout the entire app
replaced the keypair occurances with key pair in the entire qml ui files
fixes: #13612
---------
Co-authored-by: belalshehab <belal@status.im>
Co-authored-by: Valentina Novgorodtceva <valentina@status.im>
- add new `showRadioButtons` and `showTitle` UI customization points
- adjust SB and expose all the existing modes, fix it to make it work
with multi selection
- integrate these new modes into SwapModal to align it with the Figma
design
Fixes#14780
- new panel created: `SwapInputPanel`
- some cleanups to the needed stores
- created a SB page demonstrating the use of 2 panels and the
`SwapExchangeButton`
- created QML tests
Fixes#14781
* refactor: rely on canPost and canView instead of checking permissions
Fixes#14983
* chore: remove all Light permission checks that are no longer needed
Fixed an issue where communityDetails were not being updated in PermissionsView.
This issue was causing the name, color, and image not to update correctly.
Co-authored-by: mdias <maildomarcio@gmail.com>
Things done here:
Integrate basic functionality for wallet connect in status-go
Update the list of dapps from the SDK
Retrieve the persistence dapps list from the backend as a fallback
if there is no connection and SDK can't be initialized
Provide a basic simple view of dapps in the wallet connect popup
Closes: #14557
Spent too much time figuring out the puzzle of
service->module->view->QML just to call a
status-go function.
Keeping this attempt for later while moving to a
simplified Controller/Provider approach. I will
come back to the abstraction when we add tests
to use it.
Updates: #14615
When creating or editing a community permission, if you add a holding token that has already been added,
the amount value displayed is in basic units (long value) of that token instead of primary units
- Create row radiobutton component like the one defined in design
- It shall contain custom set of buttons
- It shall contain a Custom button that will be converted to an input
field
- Add the new component into a new storybook page
- Create necessary qml tests to cover the component logic
Fixes#14784
- create a custom circle button component for the Swap popup, with the
needed click event and a border area that can be overlaped with the
background as it looks in the design
Fixes#14782
* chore: switch wakuv2 fleet to waku
See status-im/infra-nim-waku#91 for details
Mostly done automatically. Some parts manually.
* chode: drop eth.staging fleet
Signed-off-by: Jakub Sokołowski <jakub@status.im>
---------
Signed-off-by: Jakub Sokołowski <jakub@status.im>
Co-authored-by: Jakub Sokołowski <jakub@status.im>
Part of https://github.com/status-im/status-desktop/issues/14886
The problem was that we converted `collapsed` to `opened` way too early and with a logic error.
By using collapsed until the module, it's way easier to understand and also fixes the logic mistakes.
I also renamed a couple of functions and variables so that the mistake doesn't happen again.
Now SubmodelProxyModel doesn't affect source model therefore it's
possible to safely use multiple SubmodelProxyModels over the same source
model.
Closes: #14550
* set decimal for assets on AidropSettingsPanel and HoldingsDropdown test pages
* Disable amount length validation by default
* Input: Align validation error string to the left edge
* Update validation error copy
fixes#11918
- created a new component (`ErrorTag`) based on the existing
`InformationTag`, suitable for displaying a row of icon (optional), text
and (optional) button in red/danger color
- add ErrorTagPage.qml to StoryBook
- add some basic QML tests
- InformationTag: make more properties customizable, use the same
`bgRadius` consistently
- StatusSmartIdenticon: some fixes for the MouseArea hover/click
behavior
Fixes#14792
Fixes#14844
The problem was that links to status.app that are not shared links were still considered shared urls, because our util function can only check if it contains `status.app`.
The solution is two fold:
1. If there are Link Previews, I ask the link preview for the type of Link. If it's a normal link, I just open it.
2. If there are no Link Preview for that link, we call `parseSharedUrl` as before, but now we handle the failure by opening in the browser because we can assume that it's a normal link.
- Some NIM's models define additional (not part of the
QAbstractModelItem API) method rowData to allow access to model's data
on UI side
- The same job can be done relying fully on public QAbstractModelItem
API using ModelUtils utility. It gives full transparency if we need
nim's model or other like ListModel replacement in tests/storybook
- propagate `tokensStore` to unbreak the Browser's wallet menu
Fixes#14805
* fix: Fixing the share addresses popup height when only owner and TM permissions are available
* Update ui/app/AppLayouts/Communities/panels/SharedAddressesPanel.qml
Co-authored-by: Michał <michalcieslak@status.im>
---------
Co-authored-by: Michał <michalcieslak@status.im>
Implement the initial Pairing user workflow and disconnect option for
the first session.
Also
- rename pairing modal accordingly (`PairWCModal.qml`) to make room for the proper
`ConnectDAppModal.qml`
- basic tests for service helpers
- update storybook to reflect the new user workflows
Closes#14607
When channel has view-only permission not requiring any holdings, the
channel is not encrypted and should be presented to non-members in
read-only mode.
Closes: #14439
- introduce a new boolean property `checkingPermissionToJoinInProgress`
and use it to enable/disable the Join (share addresses) button when
joining a community
- we don't have to wait for both join and channels permissions check to
finish, as the former is much faster
- renamed `joinPermissionsCheckSuccessful` to
`joinPermissionsCheckCompletedWithoutErrors` to avoid confusion
Fixes#14680
- fix rounded corners in header/footer background
- add support for footer drop shadow
- add a page/demo with the various features to StoryBook
Fixes#14499
* Remove importCommunity from QML and Nim code
Handling issue 14310. Removed functions associated with the API.
* Updated pr for suggested changes.
* Updated module.nim
---------
Co-authored-by: Eliza <elsorber@gmail.com>
- as discussed with Design, do not allow the user to select the UI scale
option from Settings as it causes many problems; instead rely on the
OS/Qt HighDPI support to handle the scaling for us
- note however, for advanced users, it's still possible to specify the
UI scale manually by exporting the standard `QT_SCALE_FACTOR` prior to
starting the app
- in the longterm, we will come with our own scaling solution at the QML
level, independent from the OS
Fixes#14137
- hide the permissions row and tokens when the community is free to join
- fix evaluating the `requirementsMet` property which affects the lock
icon state; that role was never part of the model
- add a helper C++ method `isTokenGatedCommunity`
- adjust the SB models, adding different variations of the
permissionsModel for the CommunitiesPortalLayoutPage
Fixes#14671
- run the user's display name (ENS name) thru the `Emoji.parse()`
function as that will convert the potentially UTF-16 encoded name
containing emojis into an image
Fixes#12290
Other changes
- start Wallet Connect SDK using web engine after wallet is ready
- source WC project ID from the constants in nim
- close list when opening the `ConnectDappModal`
- remove the old POC modal instantiation
- rename ConnectDappPopup to Modal for consistency
- move specific dapps related user settings to their place in the component
- add DAppsStore to be used for dapps abstraction
Updates #14556
* chore: bump status-go
* fix: mitigate permissions stuck in pending on control node promotion
This PR fixes#14023
UI does NOT allow promoting to control node is no Owner token is present
- since the window can be a combination of several states (e.g.
maximized + fullscreen + minimized), use the newer `windowStates()` to
track and toggle them
- call `makeStatusAppActive()` in all the identical codepaths (clicking
tray icon, activating a mac or win instance, running a second instance,
etc)
- fixes restoring the window to its previous state(s) when activating
from the tray or dock icon
- use some more standard keyboard shortcuts
Fixes#14132
- if there's a valid community info and the color is non-empty, inherit
it when creating a new channel
- also fix the color picker button height
- adjust the SB page with separate "create" and "edit" options
Fixes#14570
TLDR: the `StatusLoadingIndicator` will be able to continue the
(rotating) animation eventhough the app might be stuck as
`RotationAnimator` runs on the render thread
- make `StatusIcon` use internally `ColorImage` component which makes it
possible to recolor `Image` on the fly w/o the need to use
`QtGraphicalEffects` module and a separate color layer
- which in turn enables us to use `StatusIcon` with the
`RotationAnimator`
- one minor drawback though, we can no longer use the versioned
properties like `mipmap` with `StatusIcon`; not a big deal as we use
this with SVGs only
Fixes#10014
Problem:
There were no difference between the fact that the avatar is not changed and the avatar is deleted. The same for bio and displayName
On NIM, this state was simply rewritten
Solution
(The problem was discovered due to the fact that if the picture does not change, then Nim receives a base64 encoded source - instead of the path to the new Avatar. Which Status go could not parse as a file.)
On the QML side, if we see that there have been changes, we add changes to changesMap Json, if there are no changes, then do not add. (This is the way to implement Option).
On the NIM Side - convert to saveData
On the Module side - distinguish Nil from an empty string
fixes#14464
- correct propagation of hover events, fixes card flicker
- improve the ugly thick border
- token icons are now correctly rounded
- fix text descent lines are cut of ("y" and "p" truncated at the
bottom) due to excessive clipping, set correct max line count
- fix tag outline not being visible in dark mode
- add/update the corresponding SB page, with more controls to play
around with the different params
Fixes#14555
- make it conditionally available for testing via
Settings/Advanced/Enable translations
- display a tooltip and infobox explaining the current and future
situation
- upon app start, force the language to "en" if the translations are not
enabled; and suggest app restart when they get disabled
Fixes#14527
- fix the corner case and allow the user to join a community without an
explicitely stated "Member" permission
- enable/disable the Share/Join/Save buttons when the permission to join
check is ongoing, or when the permission check failed
- display tooltips over the disabled buttons explaining why it's disabled
- always display the eligibility button floating on top of the
(scrollable) contents
Fixes#14473Fixes#14299
- also trim the leading/trailing whitespace
- fixes long bio (mainly due to linebreaks) pushing down everything
below and also overflowing the preview
- adjust SB page to include such example bio
Fixes#14463Fixes#14465
There was inconsistency in qvariant type of submodels depending if it
was initial call for a given row (creating proxy) or further calls
(returning cached object). It led to subtle issues in views - view was
reporting type errors and failing assigning submodels properly when used
with submodel proxy with already initialized and cached proxy submodels.
Closes: #14507
- gives an overview of all the `Theme.palette.foo` colors
- the color name/code can be copied to clipboard
- light/dark variant supported via storybook's "Dark mode" switch
- integrated search (both the color name and value)
* chore: added object name for manage community on testnet
* chore: added object names for buttons in sign transactions popup
* chore: added object names for preview boxes
- hide the footer when the user is an admin or token master, unless
there is a pending ownership request (`isPendingOwnershipRequest`)
- similarly, hide the sharding section in `CommunityInfoEditor`
- do not cover the shard button with the `SettingsDirtyToastMessage`
- some SB page cleanups and additions
Roman Chornii
Lukáš Tinkl
Khushboo Mehta
belalshehab
Michał Cieślak
Sale Djenic
Cuteivist
Jonathan Rainville
Stefan
Valentina1133
richΛrd
Andrey Bocharnikov
Godfrain Jacques
Ivan Belyakov
Michal Iskierko
Dario Gabriel Lipicar
Alex Jbanca
Lungu Cristian
Igor Sirotin
Noelia
Valentina Novgorodtceva
Anthony Laibe
Alex Jbanca
Patryk Osmaczko
Anastasiya Semenkevich
Belal Shehab
Mykhailo Prakhov
Seitseman
Mikhail Rogachev
mdias
Anton Iakimov