These components are used to render the chat info in the top bar of the chat view.
`StatusChatInfoButton` is an clickable button that will open chat info dialogs.
Closes#923
This component introduces `StatusLetterIdenticon`, `StatusImageIdenticon`
and `StatusIdenticon`.
- `StatusLetterIdenticon` renders an identicon with a single letter based on a
name.
- `StatusImageIdenticon` renders an actual image based on an identicon URL
- `StatusIdenticon` is a composition of the former both, but with a loading mechanism
to decide which should be rendered
The commit also ensures all of these components are used respectively throughout
the application.
Disable the selection of "contact" in the send transaction modal, because right now, this is not possible, but it will be in the future. Once we get this working, we can uncomment it.
Fixes: #815
Previously, only stickers purchased from the main status account were shown. Now, stickers purchased from any of the accounts are shown.
Accounts include any accounts returned by `accounts_getAccounts` and are non-chat accounts.
Fixes#788.
Fixes#853.
Fixes#856.
refactor: gas estimation and transaction sends have been abstracted to allow calling `estimateGas`, `send`, and `call` on the contract method (similar to the web3 API).
Moved sticker pack gas estimation and purchase tx over to the new API
*Sticker purchase:*
- gas estimate is done using new API and debounced using a timer
*Wallet send transaction:*
- tokens can now be sent
- gas is estimated correctly for a token tx, and debounced using a timer
***NOTE***
1. If attempting to send tokens on testnet, you must use a custom token as the token addresses in the pre-built list are for mainnet and will not work on testnet.
2. The new API should support all existing gas estimates, send txs, and calls. The loading of sticker pack data, balance, count, purchased sticker packs, etc, can be moved over to the new API. Almost all of the `eth_sendTransaction`, `eth_gasEstimate`, and `eth_call` could be move over as well (that's the idea at least).
This commit extends the AddressInput to perform ENS lookups when valid
ENS values are entered. The lookup happens asynchronously, so we show a loading
indicator as the request is happening.
Closes#790
Add gas estimate for sticker pack purchase.
Update transaction for sticker pack purchase.
Add GasValidator component which validates gas is selected correctly and displays an error message if not. This component is not visible until it is not valid (at which point the valdiation error message is displayed).
In a future PR, need to:
1. estimate gas for token txfer (sendTransaction) via a normalised method for estimating gas for EthSend
2. move sticker pack purchase to use an EthSend object so gas can be estimated and tx sent
Fixes#669.
Composes all tx components to create a send transaction modal for the wallet.
1. Add a reusable TransactionStackView component that wraps a StackView component to show the screens of the Send Tx modal and handles back/forward/reset functionality.
2. Add a reusable TransactionStackGroup which holds tx components and allows modal header and button text to be defined and handles validation for all child components.
3. Add an isValid property to all tx comps for pristine validation state.
4. Reset all components in modal once modal is closed. This consists of a `resetInternal` function that each component should implement to reinstate its original starting state, and a `reset` function that parent components can use to reinstate the overridden properties.
5. Tx error handling to display either a StatusGo error message in the dialog, or wrong password in the TransactionSigner.
6. Fix ReceiveModal to allow for pre-selected account based on current wallet account.
7. Add focused border colour to Input component.
8. Fix issue with last TransactionStackGroup input not being able to obtain focus.
9. Fix fiatBalance not appearing on initial load on AccountSelector.
10. Fix selected asset updated properly when assets changed in the AssetSelector component.
11. AccountSelector is pre-populated with selected wallet account. Supporting work on the components has been done to suppor this.
12. Changing accounts in the "from account" updates the asset balances in the AssetAndAmountInput component.
13. Move validation from ContactSelector to the Select component.
1. Test sending of tokens. This requires that tokens contracts are setup on testnet. Right now, they are set up for contract addresses on mainnet.
2. Loading state once transaction is sent. Button in modal needs to move to a loading state and the "toast" messages in the wallet need to appear informaing user of tx progress.
3. Need to clarify (and implement?) support of ENS names in the AddressInput. It appears that ENS names could be resolved. This would be a long operation and require some kind of UI loading indication.
4. Wallet balances need to be updated on every block, so for example, sending funds between accounts I should be able to see the balance updated in real time.
1. Sending to a contact currently doesn't work because the ContactSelector component selects the Contact's whipser key, instead of his/her wallet address. May need to figure out how this is done in status-react. As it stands, attempting to send to a contact will crash the app.
2. Sending *from* an imported account does not work, with an error from StatusGo `cannot locate account for address: 0x123...`
As per discussion, there's no "primary" and "secondary" type in round buttons.
They just appear in different sizes (44x44, 40x40, 32x32). The size determines
their look & feel
So far our `IconButton` hasn't been a proper button control which comes
with many downsides, such as:
- Some default button behaviours need to be simulated (e.g. `onClicked`)
- Any support built-in features for all controls in QML like `ToolTip` aren't can't be used
- There are probably accessibility aspects to it as well
We use the `IconButton` in many different places. Sometimes it doesn't
even act as a button, but just as an icon. I suggest we introduce a separate
`StatusIcon` component for that in future changes.
This commit turns the `IconButton` into a proper `RoundButton`, restoring
the control behaviour and features we get from QML.
This also required to expose the `icon` property as a `iconImg`,
because a `RoundButton` already comes with an `icon`.
On the other hand, we could remove the `onClick` simulation and can now
take advantage of components like `ToolTip`.
This fixes a bug that, when the supplied assets change the AssetSelector resets its
selected asset as well
Previously, it would keep the selected asset around, even when the asset list has changed,
leaving it in an invalid state
This commit fine-tunes the layout of the advanced modal input controls.
It also adds validation so that only numeric values are accepted as
gas price and gas limit values
Add receive modal in the wallet to show a QR code and address selector
Improve Input component to be able to show a Copy button that copies to clipboard
Improve AccountSelector modal to be able to not show details and fix eliding
When tokens are added/removed, the asset list in the AssetAndAmountInput is updated.
The selected asset can be specified by the parent component which is needed for things like sticker market where we need to set SNT as the fixed token.
Improved the validation for the component:
- validate() can be called externally
- validation display is handled internally and messages can be customised
- validation error messages are handled by the Input component and validation UX is consistent with other tx components
Remove all `walletModel` references from the `AccountSelector` component, as the component should not be aware of the API's existence.
Pass currency to `AccountSelector` component.
Fixes#670.
Component spec based on https://www.notion.so/emizzle/Wallet-transaction-components-2003b78a8d0d41c4ab3d21eb2496fb20.
Changes the current Select shared component to a model databound component. This means we can bind directly to `QAbstractListModel`'s coming from Nim instead of needing manipulating the data in to javascript objects. The changes to the Select component will be used for the upcoming Asset selector shared component.
This introduces the ability to:
- list search existing contacts
- block contacts
- unblock contacts
- list blocked contacts
- remove contacts
- search and add contacts
Closes#608
Sticker pack details retreived from contract:
- pack data decoded from contract response
- data contains contentHash which, once decoded, contains an IPFS identifier
- futher pack data in EDN format is downloaded from IPFS
- the EDN info is decoded in to a StickerPack
List of available packs from contract are obtained separately from list of installed contracts (stored as a setting in Status-go).
Sticker market contains dynamic list of sticker packs. The sticker button shown for each pack has all states defined (in the design) for all UI states (ie bought, free, installed, pending, etc)
Add modal popup showing sticker pack details and list of stickers to be un/installed. Contains a "larger" version of the sticker pack button with many differnt UI states defined.
Uninstallation of a sticker pack removes those sticker pack's stickers from the recent sticker list and persists the list
Simplify the view model by including stickers, instead of setting an "activeStickerPackId" property. This allowed for display of sticker pack stickers to be displayed in the modal popup separately from the sticker packs shown in the market.
Add sticker popup
Add send sticker message
Add ability to select sticker pack and show stickers for pack with scroll
1. Sticker history
2. Install sticker packs
3. Sticker market
1. Sticker packs are installed on app start up until installation of sticker pack functionality is added
2. Optimisations such as preloading images to be done so that sticker images are not downloaded each time.
The border color of `RoundedColor` is way darker than channel and chat icons in
other places of the application.
This commit aligns it so it's the same everywhere
Having all the different input types in one file made it simpler to design, but created an issue with memory, because all the aliases, properties and images were created for all types even if you only used a basic Input. I tried using Loaders, but making aliases within loaders is super painful/impossible in some cases.
Similar to its `footer` content, ModalPopup can now receive header components
allowing consumers to design the header part of the modal to their likings.
Usage:
```
ModalPopup {
id: popup
header: Item {
...
}
...
}
```
The header section will take the height of the root element of the substree
passed to `header`
Generates 5 random accounts with identicons, allows user to enter password, then stores the account and logs in to the statusgo node.
Add EventEmitter that notifies nim_status_client.nim once node has started and is logged in (likely needs some refactoring to include the eventemitter in the base controller class).
Add QML StateMachine for the onboarding view.
Add nimcrytpo, uuids, eventemitter, isaac dependencies via submodules.
Add button to Intro view to randomly gen account.
Onboarding carousel completed
Redo folder restructuring
NOTES:
1. nim_status_client binary is output to `./bin/nim_status_client`, so you'll need to update your workflow to run this file. README has been updated to reflect this. Also, if you're running VSCode, instructions for code reload were added.
2. All `ui` files now live in `ui/`
3. All lib files (ie `libstatus`) now live in `lib/`
4. Removed the Qt Creater user project file as this is unique to each user
5. Moved the project file to `ui/`, so just open up the `ui` folder in Qt creator and it should locate the project file
6. `-d:release` removed from compilation as it wasn't needed
7. Broke up main.qml in to the main app and onboarding components, however this should be broken down further into more reusable components
8. Click "Get started" to show chat
Format some files using nimpretty
Pascal Precht
Richard Ramos
Jonathan Rainville
emizzle
Iuri Matias