A new rule introduced which should provide easier tracking/maintainig
later. The rule says:
- popup contains up to 3 action buttons and one back button (optional)
- if 3 buttons are displayed in the popup then the most left button, but
not back button, always triggers tertiary action, middle button always
triggers secondary action and the most right button always triggers primary
action
- if 2 buttons are displayed, then:
- if one of them is "Cancel" (left button) it should trigger tertiary action
and the other one (right button) should trigger primary action
- if non of them is "Cancel" then the left button triggers secondary action
and the right button triggers primary action
- if single button is displayed, then:
- if it's "Cancel" it triggers tertiary action
- if it is not "Cancel" it triggers primary action
- tertiary action always reffers to the cancel action until otherwise set
- tertiary action will be always triggered by closing popup via keybord
(esc key) or clicking on top right `x` button on the popup
- align the dialog to design
- fix radio button logic (it was possible to uncheck a mutually exclusive
checked button eventhough it's inside the button group, leaving the Unpin
button in an undefined state)
- port to StatusDialog and layouts, dropping a lot of needless code
- remove dead code for passing around the `property Component
pinnedMessagesListPopupComponent`; the popup is being invoked via
`Global.openPopup()`
Fixes#7316Fixes#7315
- Added `Authenticate` flow
- `Setup a new Keycard with an existing account` updated so it includes `Authenticate` flow
from the point where is needed (when migrating a profile keypair)
- We are missing `Unlock Keycard` flow for this one, will be added once it is developed
Also
- fix the other saved addresses that were relying on the order of
buttons and fail after adding the favourite button
- improve the rest of the tests
- improve debug buttons
- extend driver with helper functions
Closes: #6898
Depends on statug-go favourite flag extension and merging of `favourites`
with `saved_address` tables and API
Additional changes:
- Remove duplicate name instead of ESN
Closes: #6546
- `Setup a new Keycard with an existing account` flow improved
- code review comments applied
- Qml part updated due to the latest `StatusListItem` changes in `StatusQ`
- Added flow which covers `Setup a new Keycard with an existing account` from
the keycard settings part (though two sub-flows there are missing, `Unlock Keycard`
and `Authentication` cause we don't have them yet).
- Updated factory reset flow (part of shared module) that it can read and display metadata
from a keycard if they are set, with this update this flow is almost complete, we are missing
`Unlock Keycard` flow for it as well.
Enable preview for gifs after enabling the gif functionality
Disable gif functionality if the preview was disabled
Addition fixes
- The gifs weren't checked if all images weren't enabled
- The subdomain wasn't checked for whitelisting if the main domain wasn't enabled
- Image clicking
- Dismiss asking for unfurling was not updating the state
Considerations
- Looked into having the "gif enabled" - "tenor unfurling" relation
embedded in the controller but it would require extensive refactoring
by implementing a data-model for unfurling whitelisted domains
Closes: #6829
the "Recent emojis" was always empty until the user has clicked
additional emoji
loading the recent emojis in `Global.onSettingsLoaded` is too late; it's
executed long before the popup is opened; instead do it at the end of
parsing the categories
Replace Contact component with StatusMemberListItem.
Add missing Nim functions to fill models with onlineStatus.
Adjust components paddings to match design.
Fixes#6985
The test network was toggled twice. The banner was impeding with the wallet setting click. The asset list item was missing the objectName and also checking the balance was not resilient
This adds a feature flag for the discord import tool so we can start
landing individual pieces of the feature without it being fully
implemented.
It also introduces the modal chooser for creating new communities but
it doesn't do anything more than that, as of this commit
Closes#6843
Remove ValidationMode.Always for StatusInputs because by default they
are invalid and validate input when dirty
Remove condition from errorMessage of BackupSeedStepBase as not needed.
Fixes#6825
Requires https://github.com/status-im/StatusQ/pull/858
BREAKING CHANGE: StatusInputs are invalid by default and validate when
dirty.
`tst_chatFlow`:
- Commented out bc of `mailserver` issues and then weak.
- Added basic test scenario for sending a mention in a public chat with needed validations.
- Added basic test scenario to check a mention cannot be done if it is a non existing user.
`StatusChatScreen` updates:
- Updated join room method to validate the chat is loaded.
- Added methods for doing and verifying a mention.
`SquishDriver` updates:
- Added support in `SquishDriver` to click into a link in a text or label component.
- Minor function renames.
Closes#6879
- Added functionality as experimental advanced view button
feat(CommunitySettings / Permissions): Added welcome page
- Enabled new permissions tab.
- Created welcome page layout.
- Added permissions welcome image.
- Fixed top margin content in `SettingsPanelLayout` to fit designs.
Closes#6036
feat(CommunitySettings/Permissions): Created `new permission` page
- Added `new permission` page.
- Created first card layout.
- Added navigation between `welcome` and `newPermission` views.
- Improvements in base community settings layout pages.
Closes#6037
feat(CommunitySettings/Permissions): `Who holds` tokens dropdown component creation and integration
- Tokens dropdown component creation: main view, operators view and extended view.
- Logic to add new token and change operator.
Part of #6038
This partially covers factory reset flow. The part where user is able to select which accounts
wants to remove/keep from/on a keycard will be added later once we add the keycard settings part
for storing those data to a keycard.
Fixes: #6790
Use new status-go function to update group chat details.
Changes in RenameGroupPopup to handle choosing colors and images.
Changes in EditCroppedImagePanel to handle background component.
Issue #5982
Keycard implementation affected onboarding/login flows.
- new user - first run - new keys into keycard
- new user - first run - import seed phrase into keycard
- old user - first run - login importing from keycard
- login the app using keycard
Fixes: #5972
drop a defunct MouseArea that was being used for a context menu which got
removed in the meantime; it breaks clicking inside the TextField
Closes: #5167
Fixes#6251
Adds the "Respond to Contact Request" and "Contact Request Pending" options to the MessageContextMenu
Also fixes some small issues with contact verification where the state of the incoming request was not correct
- Created new test case with basic create group chat scenario.
- Added specific data folder for `tst_groupChat`.
- Removed deprecated data folder.
- Added dynamic login (depending on the account).
- Added global account information in `suite_status/data` folder.
- Added new group chat validations, title, history texts, members added and send chat message.
- Replaced some ids by objectNames.
- Some improvements in `names.py`.
- Onboarding objects refactor.
Fixes#6444
- fix system appearance preview being cut off
- bring the panel close to UI design (I haven't changed the common
stuff like headline fonts, overall margins, etc)
Closes: #6623
- startup, login and onboarding modules merged into the single one
- `State` class introduced which is the base class for all states, every state
determines what is the next state in each of 3 possible actions, and what
is the previous state, if it has previous state
- `StateWrapper` class is introduced as a convenient way to expose
`State`'s props and deal with them on the qml side
- startup module maintains states as a linked list and there are few convenient
methods to move through the list `onBackActionClicked`, `onNextPrimaryActionClicked`
`onNextSecondaryActionClicked`, `onNextTertiaryActionClicked`
- redundant code removed
Fixes: #6473
- add the (Un)Mark as Untrustworthy action to the menu
- fix the placement and visuals of the (Un)Block menu item
- add a missing separator above these
- store the blocked and trust details in `d.contactDetails` and properly
refresh it upon opening the menu
- some other smaller UI fixes to align the menu to the design
Closes#6538: Stranger's (untrustworthy) menu doesn't match the Design
Closes#6535: The stranger's card doesn't match the Design
previously, the context menu would be randomly placed; now the image gets
access to its context menu and allows for placing it precisely, just like
it's done in UsernameLabel
the role name exported by the model has (likely) changed :/
`qrc:/imports/shared/views/chat/MessageView.qml:212: Error: Cannot assign [undefined] to QString`
`StatusButton` is now used correctly. There are 3 different button variations with preset heights/widths and paddings. The consumer cannot change the height without altering the expected behaviour and display of the button.
Button height is now consistent with chat input.
Fixes#6298
Fixes#6396Fixes#6398
- fix displaying the chatkey and the copy button next to it using layouts
- hide the mutual contact and verified contact icons in case of My
profile
Sale Djenic
Lukáš Tinkl
Michal Iskierko
Patryk Osmaczko
Jonathan Rainville
Stefan
PavelS
Anthony Laibe
Khushboo Mehta
Igor Sirotin
Alexandra Betouni
Boris Melnik
Pascal Precht
Michał Cieślak
Richard Ramos
Anastasiya S
Noelia
MishkaRogachev
Khushboo-dev-cpp
Kamil K
Jakub Sokołowski