With the introduction of batching and lazy attestation aggregation, it
no longer makes sense to enqueue attestations between the signature
check and adding them to the attestation pool - this only takes up
valuable CPU without any real benefit.
* add successfully validated attestations to attestion pool directly
* avoid copying participant list around for single-vote attestations,
pass single validator index instead
* release decompressed gossip memory earlier, specially during async
message validation
* use cooked signatures in a few more places to avoid reloads and errors
* remove some Defect-raising versions of signature-loading
* release decompressed data memory before validating message
* avoid creating indexed attestation just to check signatures - above
all, don't create it when not checking signatures ;)
* avoid pointer op when adding attestation to pool
* better iterator for yielding attestations
* add metric / log for attestation packing time
This is a revamp of the attestation pool that cleans up several aspects
of attestation processing as the network grows larger and block space
becomes more precious.
The aim is to better exploit the divide between attestation subnets and
aggregations by keeping the two kinds separate until it's time to either
produce a block or aggregate. This means we're no longer eagerly
combining single-vote attestations, but rather wait until the last
moment, and then try to add singles to all aggregates, including those
coming from the network.
Importantly, the branch improves on poor aggregate quality and poor
attestation packing in cases where block space is running out.
A basic greed scoring mechanism is used to select attestations for
blocks - attestations are added based on how much many new votes they
bring to the table.
* Collect single-vote attestations separately and store these until it's
time to make aggregates
* Create aggregates based on single-vote attestations
* Select _best_ aggregate rather than _first_ aggregate when on
aggregation duty
* Top up all aggregates with singles when it's time make the attestation
cut, thus improving the chances of grabbing the best aggregates out
there
* Improve aggregation test coverage
* Improve bitseq operations
* Simplify aggregate signature creation
* Make attestation cache temporary instead of storing it in attestation
pool - most of the time, blocks are not being produced, no need to keep
the data around
* Remove redundant aggregate storage that was used only for RPC
* Use tables to avoid some linear seeks when looking up attestation data
* Fix long cleanup on large slot jumps
* Avoid some pointers
* Speed up iterating all attestations for a slot (fixes#2490)
* only deserialize attestation and aggregation gossiped signatures once
* re-indent some aggregate checks into block scope
* spelling
* remove debugging assertion
* put part of gossip validation back into block context
* attestation pool test signature loading isn't so unsafe, and exportRaw isn't free
* remove more development doAsserts; don't exportRaw in loops
* Reset cached indices when resetting cache on SSZ read
When deserializing into an existing structure, the cache should be
cleared - goes for json also. Also improve error messages.
* batch attestations
* Fixes (but now need to investigate the chronos 0 .. 4095 crash similar to https://github.com/status-im/nimbus-eth2/issues/1518
* Try to remove the processing loop to no avail :/
* batch aggregates
* use resultsBuffer size for triggering deadline schedule
* pass attestation pool tests
* Introduce async gossip validators. May fix the 4096 bug (reentrancy issue?) (similar to sync unknown blocks #1518)
* Put logging at debug level, add speed info
* remove unnecessary batch info when it is known to be one
* downgrade some logs to trace level
* better comments [skip ci]
* Address most review comments
* only use ref for async proc
* fix exceptions in eth2_network
* update async exceptions in gossip_validation
* eth2_network 2nd pass
* change to sleepAsync
* Update beacon_chain/gossip_processing/batch_validation.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
Co-authored-by: Jacek Sieka <jacek@status.im>
* update some v1.1.0 alpha1 to alpha2
* remove unused getDepositMessage overload and move other out of datatypes/base
* bump nim-eth2-scenarios to download v1.1.0-alpha.2 test vectors
* construct object rather than result
Since quite a lot of additional procs were now compiled as generics, this lead to compiler bugs that had
to be worked-around:
* The `Domain` type was renamed to `Eth2Domain` to avoid compilation errors
due to conflicts with `nativesockets.Domain`.
Similarly, `eth2_network.KeyPair` was renamed to `NetKeyPair`.
* A new more robust version of `hexToByteArray` was added to stew
* set upper bound on EpochRef cache
* max 32 EpochRef instances
* less memory waste in BlockRef by removing EpochRef seq that is mostly
unused (~20mb)
* less memory waste in dag block lookup by not keeping an extra copy of
digest (~70mb)
* fix `==` and `$` for Eth2Digest
* remove `ChainDAG.tmpState` (~50mb?)
all in all, this branch cuts mainnet memory usage by ~160-180mb and puts
limits on EpochRef cache usage - where normally it hovered around 950mb
before, it's now sitting at 600-700mb on my machine.
* docs
* initial immutable validator database factoring
* remove changes from chain_dag: this abstraction properly belongs in beacon_chain_db
* add merging mutable/immutable validator portions; individually test database roundtripping of immutable validators and states-sans-immutable-validators
* update test summaries
* use stew/assign2 instead of Nim assignment
* add reading/writing of immutable validators in chaindag
* remove unused import
* replace chunked k/v store of immutable validators with per-row SQL table storage
* use List instead of HashList
* un-stub some ncli_db code so that it uses
* switch HashArray to array; move BeaconStateNoImmutableValidators from datatypes to beacon_chain_db
* begin only-mutable-part state storage
* uncomment some assigns
* work around https://github.com/nim-lang/Nim/issues/17253
* fix most of the issues/oversights; local sim runs again
* fix test suite by adding missing beaconstate field to copy function
* have ncli bench also store immutable validators
* extract some immutable-validator-specific code from the beacon chain db module
* add more rigorous database state roundtripping, with changing validator sets
* adjust ncli_db to use new schema
* simplify putState/getState by moving all immutable validator accounting into beacon state DB
* remove redundant test case and move code to immutable-beacon-chain module
* more efficient, but still brute-force, mutable+immutable validator merging
* reuse BeaconState in getState
* ensure HashList/HashArray caches are cleared when reusing getState buffers; add ncli_db and a unit test to verify this
* HashList.clear() -> HashList.clearCache()
* only copy incrementally necessary immutable validators
* increase strictness of test cases and fix/work around resulting HashList cache invalidation issues
* remove explanatory scaffolding
* allow for storage of full (with all validators) states for backwards/forwards-compatibility
* adjust DbSeq type usage
* store full, with-validators, state every 64 epochs to enable reverting versions
* reduce memory allocation and intermediate objects in state storage codepath
* eliminate allocation/copying through intermediate BeaconStateNoImmutableValidators objects
* skip benchmarking initial genesis-validator-heavy state store
* always store new-style state and sometimes old-style state
* document intent behind BeaconState/Validator type-punnery
* more accurate failure message on SQLite in-memory database initialization failure
* allow multiple hard fork datatypes to coexist
* update to 1.0.1
* merge recent datatypes.nim updates
* trigger rebuild now the out-of-disk-space machine offline
* database state storage benchmarking via ncli_db
* more cleanups from immutable validator state branch
* unexport some eth2_network constants and remove unused variables/templates
* make two PeerScore constants public
* expose node signatures
* format bitseqs as hex strings
* format trusted sigs as hex strings (same as untrusted)
* reuse rpc client sigs
* include validator index in duties
* move SyncInfo to spec
* use IntSet rather than HashSet[ValidatorIndex]
* add bounds check before uint64 -> int conversion
* use intsets in block transitions
* remove superfluous Nim issue explanation/reference
* performance fixes
* don't mark tree cache as dirty on read-only List accesses
* store only blob in memory for keys and signatures, parse blob lazily
* compare public keys by blob instead of parsing / converting to raw
* compare Eth2Digest using non-constant-time comparison
* avoid some unnecessary validator copying
This branch will in particular speed up deposit processing which has
been slowing down block replay.
Pre (mainnet, 1600 blocks):
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3450.269, 0.000, 3450.269, 3450.269, 1, Initialize DB
0.417, 0.822, 0.036, 21.098, 1400, Load block from database
16.521, 0.000, 16.521, 16.521, 1, Load state from database
27.906, 50.846, 8.104, 1507.633, 1350, Apply block
52.617, 37.029, 20.640, 135.938, 50, Apply epoch block
```
Post:
```
3502.715, 0.000, 3502.715, 3502.715, 1, Initialize DB
0.080, 0.560, 0.035, 21.015, 1400, Load block from database
17.595, 0.000, 17.595, 17.595, 1, Load state from database
15.706, 11.028, 8.300, 107.537, 1350, Apply block
33.217, 12.622, 17.331, 60.580, 50, Apply epoch block
```
* more perf fixes
* load EpochRef cache into StateCache more aggressively
* point out security concern with public key cache
* reuse proposer index from state when processing block
* avoid genericAssign in a few more places
* don't parse key when signature is unparseable
* fix `==` overload for Eth2Digest
* preallocate validator list when getting active validators
* speed up proposer index calculation a little bit
* reuse cache when replaying blocks in ncli_db
* avoid a few more copying loops
```
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3279.158, 0.000, 3279.158, 3279.158, 1, Initialize DB
0.072, 0.357, 0.035, 13.400, 1400, Load block from database
17.295, 0.000, 17.295, 17.295, 1, Load state from database
5.918, 9.896, 0.198, 98.028, 1350, Apply block
15.888, 10.951, 7.902, 39.535, 50, Apply epoch block
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* clear full balance cache before processing rewards and penalties
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
Validation is turned off meaning that no BLS operations are performed
3947.901, 0.000, 3947.901, 3947.901, 1, Initialize DB
0.124, 0.506, 0.026, 202.370, 363345, Load block from database
97.614, 0.000, 97.614, 97.614, 1, Load state from database
0.186, 0.188, 0.012, 99.561, 357262, Advance slot, non-epoch
14.161, 5.966, 1.099, 395.511, 11524, Advance slot, epoch
1.372, 4.170, 0.017, 276.401, 363345, Apply block, no slot processing
0.000, 0.000, 0.000, 0.000, 0, Database block store
```
* fix subnet calculation in RPC and insert broadcast attestations into node's pool
* unify codepaths to ensure only mostly-checked-to-be-valid attestations enter the pool, even from node's own broadcasts
* update attestation pool tests for new validateAttestation param
* make subnet cycling more robust; use one stability subnet/validator; explicitly represent gossip enabled/disabled
* fix asymmetry in _snappy being used for subscriptions but not unsubscriptions
* remove redundant comment
* minimal RPC and VC support for infoming BN of subnets
* create and verify slot signatures in RPC interface and VC
* loosen old slot check
* because Slot + uint64 works but uint64 + Slot doesn't
* document assumptions for head state use; don't clear stability subnets; guard against VC not having checked an epoch ahead, fixing a crash; clarify unsigned comparison
* revert unsub fix
* don't lag aggregated attestations by a slot
* don't use aggregation topic at all
* use aggregates again, but with aggressively low ATTESTATION_PROPAGATION_SLOT_RANGE; seems to hold on to LH 1.0 nodes
* clean up scaffolding and double ATTESTATION_PROPAGATION_SLOT_RANGE to 16
* increase ATTESTATION_PROPAGATION_SLOT_RANGE to 24
* increase ATTESTATION_PROPAGATION_SLOT_RANGE to 28 and isolate in only used function due to customization; remove TRAILING_DISTANCE machinery
* Revert "Revert "Full "node" RPC calls implementation and fixes to peer lifetime states. (#2065)" (#2082)"
This reverts commit 7cc3dc8027.
* fix nil disconnectedFut crash
* fixes
don't resetPeer, it causes peer miscounts
* disconnect disconnecting peers
...when there's a race.
* avoid connection spamming
* never decrease SeenTable timeout
* only recover ENR for known peers
* seen only when really disconnected
* Handle some web3 timeouts better
* Add support for developer .env files
* Eth1 improvements; Mainnet genesis state
Notable changes:
* The deposits table have been removed from the database. The client
will no longer process all deposits on start-up.
* The network metadata now includes a "state snapshot" of the deposit
contract. This allows the client to skip syncing deposits made prior
to the snapshot (i.e. genesis). Suitable metadata added for Pyrmont
and Mainnet.
* The Eth1 monitor won't be started unless there are validators attached
to the node.
* The genesis detection code is now optional and disabled by default
* Bugfix: The client should not produce blocks that will fail validation
when it hasn't downloaded the latest deposits yet
* Bugfix: Work around the database corruption affecting Pyrmont nodes
* Remove metadata for Toledo and Medalla
Validators exiting is normal, no need to scream about it
* avoid reallocating seq on big exit queue
* avoid fetching state cache when updating head (it's rarely needed)
* remove incorrectly implemented live validator counts (avoids memory
allocs)
Calculating rewards/penalties is slow due to how we compute sets of
attestations validators then use the sets for inclusion checks, to see
who attested. The dominant function during validated block processing /
epoch processing is hash set building and lookup.
This PR inverts the flow by removing the sets and creating a single
large validator status list, then applying all relevant state
attestations, then updating rewards and penalties.
This provides a 10x speedup to epoch processing which in turn speeds up
both empty slot and block processing - for example, on startup, we
replay all non-finalized blocks to prime fork choice - the same when
validating attestations or replaying states on reorg.
* misc memory and perf fixes
* use EpochRef for attestation aggregation
* compress effective balances in memory (medalla unfinalized: 4gb ->
1gb)
* avoid hitting db when rewinding to head or clearance state
* avoid hitting db when blocks can be applied to in-memory state -
speeds up startup considerably
* avoid storing epochref in fork choice
* simplify and speed up beacon block creation flow - avoids state reload
thanks to head rewind optimization
* iterator-based committee and attestation participation help avoid lots
of small memory allocations throughout epoch transition (40% speedup on
epoch processing, for example during startup)
* add constant for threshold
* update ve1.0.0-rc.0 preset spec references
* remove runtime preset ETH1_FOLLOW_DISTANCE from preset files; remove two CI build items to try to keep Travis from timing out
This addresses the issues by detecting and rejecting keystores with
incorrect PBKDF2 and SCrypt params. It also bumps the version of
nim-json-serialization to include a bugfix for incorrect parsing
of json files featuring comments.
It turns out that we often save lots of states in the database that are
the result of empty slot processing only - here, we make sure to only
save a state if a block follows - this fixes several issues:
* empty slot states are not always pruned leading to state database size
explosion
* storing states is (very) slow which slows down processing in general,
so we should only do it when it's likely to be useful
* attestation processing doesn't get stuck on saving random states that
won't appear in the chain history
* in exit pool, filter out already-packaged messages; bundle remaining messages into beaconblocks
* filter messages at block construction time
* allow adding up to intended capacity of buffers, beyond per-block limits
* document rationale/design for filtering mechanism
* Bump BLST
* Test for https://github.com/supranational/blst/issues/22 regression
* Use SHA256 from BLST + bump nim-blscurve to reenable fno-tree-vectorize
* SHA256 on non-blst platforms import fixes
* import fixes again
* can't prefix with nimcrypto
* address review comment [skip ci]
* {.noInit.} on the digests
about 40% better slot processing times (with LTO enabled) - these don't
do BLS but are used
heavily during replay (state transition = slot + block transition)
tests using a recent medalla state and advancing it 1000 slots:
```
./ncli slots --preState2:state-302271-3c1dbf19-c1f944bf.ssz --slot:1000
--postState2:xx.ssz
```
pre:
```
All time are ms
Average, StdDev, Min, Max, Samples,
Test
Validation is turned off meaning that no BLS operations are performed
39.236, 0.000, 39.236, 39.236, 1,
Load state from file
0.049, 0.002, 0.046, 0.063, 968,
Apply slot
256.504, 81.008, 213.471, 591.902, 32,
Apply epoch slot
28.597, 0.000, 28.597, 28.597, 1,
Save state to file
```
cast:
```
All time are ms
Average, StdDev, Min, Max, Samples,
Test
Validation is turned off meaning that no BLS operations are performed
37.079, 0.000, 37.079, 37.079, 1,
Load state from file
0.042, 0.002, 0.040, 0.090, 968,
Apply slot
215.552, 68.763, 180.155, 500.103, 32,
Apply epoch slot
25.106, 0.000, 25.106, 25.106, 1,
Save state to file
```
cast+rewards:
```
All time are ms
Average, StdDev, Min, Max, Samples,
Test
Validation is turned off meaning that no BLS operations are performed
40.049, 0.000, 40.049, 40.049, 1,
Load state from file
0.048, 0.001, 0.045, 0.060, 968,
Apply slot
164.981, 76.273, 142.099, 477.868, 32,
Apply epoch slot
28.498, 0.000, 28.498, 28.498, 1,
Save state to file
```
cast+rewards+shr
```
All time are ms
Average, StdDev, Min, Max, Samples,
Test
Validation is turned off meaning that no BLS operations are performed
12.898, 0.000, 12.898, 12.898, 1,
Load state from file
0.039, 0.002, 0.038, 0.054, 968,
Apply slot
139.971, 68.797, 120.088, 428.844, 32,
Apply epoch slot
24.761, 0.000, 24.761, 24.761, 1,
Save state to file
```
* remove some superfluous gcsafes
* remove getTailState (unused)
* don't store old epochrefs in blocks
* document attestation pool a bit
* remove `pcs =` cruft from log
* skeleton of attester slashing pool & validators
* add skeleton for proposer slashings and voluntary exits; rename pool to more inclusive exit pool to stay consistent with all three; ensure is initialized by beacon_node so is safe to merge, even if it doesn't do much yet
* stop discarding non-existent future epochs during epoch state transitions; remove a pointless StateCache() construction in advance_slots()
* update nbench to pass StateCache to process_slots()
This implements disparity, resolving a part of
https://github.com/status-im/nim-beacon-chain/issues/1367
* make BeaconTime a duration for fractional seconds
* factor out attestation/aggregate validation
* simplify recording of queued attestations
* simplify attestation signature check
* fix blocks_received metric
* add some trivial validation tests
* remove unresolved attestation table - attestations for unknown blocks
are dropped instead (cannot verify their signature)
* harden beacon_pending_deposits metrics calculation
* ...
* move beacon_pending_deposits and beacon_processed_deposits_total out of specs and into chain DAG
Replace shuffling function with zrnt version - `get_shuffled_seq` in
particular puts more strain on the GC by allocating superfluous seq's
which turns out to have a significant impact on block processing (when
replaying blocks for example) - 4x improvement on non-epoch, 1.5x on
epoch blocks (replay is done without signature checking)
Medalla, first 10k slots - pre:
```
Loaded 68973 blocks, head slot 117077
All time are ms
Average, StdDev, Min, Max, Samples,
Test
Validation is turned off meaning that no BLS operations are performed
76855.848, 0.000, 76855.848, 76855.848, 1,
Initialize DB
1.073, 0.914, 0.071, 12.454, 7831,
Load block from database
31.382, 0.000, 31.382, 31.382, 1,
Load state from database
85.644, 30.350, 3.056, 466.136, 7519,
Apply block
506.569, 91.129, 130.654, 874.786, 312,
Apply epoch block
```
post:
```
Loaded 68973 blocks, head slot 117077
All time are ms
Average, StdDev, Min, Max, Samples,
Test
Validation is turned off meaning that no BLS operations are performed
72457.303, 0.000, 72457.303, 72457.303, 1,
Initialize DB
1.015, 0.858, 0.070, 11.231, 7831,
Load block from database
28.983, 0.000, 28.983, 28.983, 1,
Load state from database
21.725, 17.461, 2.659, 393.217, 7519,
Apply block
324.012, 33.954, 45.452, 440.532, 312,
Apply epoch block
```
When blocks and attestations arrive, they are SSZ-decoded twice: once
for validation and once for processing. This branch enqueues the decoded
block directly for processing, avoiding the second, slow
deserialization.
* move processing of blocks and attestations to queue
* ...and out from beacon_node
* split attestation processing into attestations and aggregates
* also updates metrics
* clean up logging to better follow the lifetime of gossip: arrival,
validation and processing
* drop attestations and aggregates if there are too many
* try to prioritise blocks and aggregates before single-validator
attestations
* evaluate block attestations under the epochref of the block - this is
what the state transition function does
* avoid copying attestation seq unnecessarily
* avoid unnecessary hashset for unslashed indices
* don't sort shuffled_validator_indices, just get them directly with
iteration
* grab full epoch of proposer indices while we have the data available -
they'll get cached and reused
* avoid computing active validator set when not used for logging
* collect all epochrefs in specific blocks to make them easier to find
and to avoid lots of small seqs
* reuse validator key databases more aggressively by comparing keys
* make state cache available from within `withState`
* make epochRef available from within onBlockAdded callback
* integrate getEpochInfo into block resolution and epoch ref logic such
that epochrefs are created when blocks are added to pool or lazily when
needed by a getEpochRef
* fill state cache better from EpochRef, speeding up replay and
validation
* store epochRef in specific blocks to make them easier to find and
reuse
* fix database corruption when state is saved while replaying quarantine
* replay slots fully from block pool before processing state
* compare bls values more smartly
* store epoch state without block applied in database - it's recommended
to resync the node!
this branch will drastically speed up processing in times of long
non-finality, as well as cut memory usage by 10x during the recent
medalla madness.
* add --enable-logtrace argument to launch_local_testnet
* scan for all available logfiles
* remove specific filename references
* update v0.11.3 spec ref to v0.12.2
* Bump BLSCurve
* Use unified aggregation API
* use new blscurve with unified aggregate API
* bump
* fix toRaw
* replace state_sim combine with AggregateSignature
* Fix 32-bit
* Fix 32-bit for real and test deactivating ccache for fno-tree-lopp-vectorize flag
* change compilation switches to narrow down Linux issue
* Use -fno-tree-vectorize to disable both tree-loop-vectorize and tree-slp-vectorize
* blscurve now disables both Loop and SLP vectorization
* Add tests for the miracl/milagro fallback
* Travis has max log size of 4MB
* Test with Miracl in the finalization test
* fix state_sim log level
* Coment out the slow fallback tests
* initial dynamic subscribe/unsubscribe for attestations to/from subnets
* implement random stability subnet and clean up
* switch from HashSet[uint64] to set[uint8]
* refactor subnet logic out from beacon_node and actual (un)subscribing
* only try to subscribe to marginally different subnets
* add assertions
* maintain ENR subnets
* assert that beacon_node and eth2_network have consistent view of subscribed subnets
* disable actual cycling
* remove one cache, add another
This cache removes the need for rewinding in most attestation validation
flow since the attestations come from one of two epochs and must be
targetting a viable block.
Additionally, it also removes all state caches which are less likely to
be used over-all - more metrics are needed to track the rewinding.
On risk is that when chains don't finalize, we'll have lots of epochrefs
in memory meaning lots of validator key databases, most being exactly
the same. This can be addressed in any number of ways. Some of the
memory usage is mitigated by the fact that we previously had lots of big
state caches and now we're keeping only keys instead.
* cleanups
* doc
* removed the BlockPool type and all of the proxy functions around it - passing the chain DAG and the quarantine explicitly where appropriately - they don't need to be bundled in a type
* fixed the build after the rebase
* Lazy loading of crypto objects
* Try to fix incorrect field access by hiding fields but no luck. SSZ/Chronicles/macro bug?
* Fix incorrect blsValue access. was "aggregate" not "chronicles"
* Fix tests that rely on the internal BLSValue representation
* limit attestations kept in attestation pool
With fork choice updated, the attestation pool only needs to keep track
of attestations that will eventually end up in blocks - we can thus
limit the horizon of attestations that we keep more aggressively.
To get here, we expose getEpochRef which gets metadata about a
particular epochref, and make sure to populate it when a block is added
- this ensures that state rewinds during block addition are minimized.
In addition, we'll use the target root/epoch when validating
attestations - this helps minimize the number of different states that
we need to rewind to, in general.
* remove CandidateChains.justifiedState
unused
* remove BlockPools.Head object
* avoid quadratic quarantine loop
* fix
* add helper for beacon committee length (used for quickly validating
attestations)
* refactor some attestation checks to do cheap checks early
* validate attestation epoch before computing active validator set
* clean up documentation / comments
* fill state cache on demand
* avoid converting from uint64 to int, and where most feasible, int type conversion at all
* .len.uint64 -> .len64
* fix 32-bit compilation
* try keeping state_sim loop variable/bounds as int for 32-bit Azure
* len64 -> lenu64
* cache beacon committee size calculation
this fixes a bug in get_validator_churn_limit as well
* fix
* make committee counts consistently uint64
mixing feels like the worst of the two worlds
hash_tree_root was turning up when running beacon_node, turns out to be
repeated hash_tree_root invocations - this pr brings them back down to
normal.
this PR caches the root of a block in the SignedBeaconBlock object -
this has the potential downside that even invalid blocks will be hashed
(as part of deserialization) - later, one could imagine delaying this
until checks have passed
there's also some cleanup of the `cat=` logs which were applied randomly
and haphazardly, and to a large degree are duplicated by other
information in the log statements - in particular, topics fulfill the
same role
* restore EpochRef and flush statecaches on epoch transitions
* more targeted cache invalidation
* remove get_empty_per_epoch_cache(); implement simpler but still faster get_beacon_proposer_index()/compute_proposer_index() approach; add some abstraction layer for accessing the shuffled validator indices cache
* reduce integer type conversions
* remove most of rest of integer type conversion in compute_proposer_index()
This also assigns precise types to the constants in the minimal
and mainnet presets in order to reduce the chance of compilation
errors when custom presets are used (previously, only the custom
presets have precisely assigned types for the constants).
* quick workaround for epochref cache issue
* disable assertion which doesn't work without epochref caches
* get local testnets and altona running again
htr is fast now, so hitting the database to load the state root is no
longer motivated - the more simple code is less vulnerable to database
corruption.
* update most of the remaining non-fork-choice spec refs, updating code where necessary
* revert presumably harmless compute_signing_root() change, but this way, keep things really unchanged outside inspector
* Dual headed fork choice
* fix finalizedEpoch not moving
* reduce fork choice verbosity
* Add failing tests due to pruning
* Properly handle duplicate blocks in sync
* test_block_pool also add a test for duplicate blocks
* comments addressing review
* Fix fork choice v2, was missing integrating block proposed
* remove a spurious debug writeStackTrace
* update block_sim
* Use OrderedTable to ensure that we always load parents before children in fork choice
* Load the DAG data in fork choice at init if there is some (can sync witti)
* Cluster of quarantined blocks were not properly added to the fork choice
* Workaround async gcsafe warnings
* Update blockpoool tests
* Do the callback before clearing the quarantine
* Revert OrderedTable, implement topological sort of DAG, allow forkChoice to be initialized from arbitrary finalized heads
* Make it work with latest devel - Altona readyness
* Add a recovery mechanism when forkchoice desyncs with blockpool
* add the current problematic node to the stack
* Fix rebase indentation bug (but still producing invalid block)
* Fix cache at epoch boundaries and lateBlock addition
- testnets can now be launched with a separate validator client - make altona SCRIPT_PARAMS="--separateVC"
- reverted the ctrl+C signal handler code reuse - not necessary for the VC anyway (default is good enough)
- added a bit more logging in the VC
- removed unnecessary code in the VC - connect() just parses the address & port...
- fixed a couple more VC issues - when fetching the duties for an epoch fails on the BN side ==> the VC shouldn't be left in a broken state
- documented the currently supported json-rpc endpoints
- added more checks on the BN side for the API - bounds-checking the requests & also checking if the BN itself is synced
- other cleanup
currently a local sim doesn't finalize, but participation in the altona network with a separate VC is painless and works just as well as with in-process validators in a BN
* adopt Result[void, string] in place of some bool return signatures
* string -> cstring to reduce memory allocations; ensure all err() strings are constants, with contextual information from higher-level callers
* logScope usage fixes
* homogenize err() reporting convention
* invalid signature in deposit isn't an error
* add tests for unviable blocks
also enable finalization tests in all test configs - they're plenty fast
now
also fix newClone for non-rvo cases. sigh.
* fixes
* cleanups
* fix ncli state root check flag
* add block dump to ncli_db
* limit ncli_db benchmark length
* tone down finalization logs
* introduce trusted blocks
We only store blocks whose signature we've verified in the database - as
such, there's no need to check it again, and most importantly, no need
to deserialize the signature when loading from database.
50x startup time improvement, 200x block load time improvement.
* fix rewinding when deposits have invalid signature
* speed up ancestor iteration by avoiding copy
* avoid deserializing signatures for trusted data
* load blocks lazily when rewinding (less memory used)
* chronicles workarounds
* document trustedbeaconblock
* re-add minimal preset constant checking; organize presets to better support multiple spec versions
* bump spec ref
* increase Azure timeout to 90 minutes to accomodate Nim compiler building
- better logging & retrying requests on the VC side if the BN fails for some reason
- VC now fetches the attestation duties 1 epoch in advance - in the future it will tell the BN to subscribe to the appropriate attestation topics in advance based on that info
- a bunch of other code cleanup & fixes such as better naming for consoles when using multitail, etc.
reviewed in PR #1184 - proper review of the API & VC are pending
* collect signature production and verificaiton in one place
Signatures are made over data and domain - here we collect all such
activities in one place.
Also:
* security: fix cast-before-range-check
* log block/attestation verification consistently
* run block verification based on `getProposer` in its own history
* clean up some unused stuff
* import
* missing raises
* 3gb vs 12gb for 4000 epochs of witti
* 3-4x sync blocks/sec performance improvement on my FDE SSD drive
* generate less quirky code for primitive types
* random fixes
* create dump dir on startup
* don't crash on failure to write dump
* fix a few `uint64` instances being used when indexing arrays - this
should be a compile error but isn't due to compiler bugs
* fix standalone test_block_pool compilation
* add signed block processing in ncli
* reuse cache entry instead of allocating a new one
* allow for small clock disparities when validating blocks
- each BN gets half of its previous validators as inProcess and the other half goes to the respective VC for that BN - using separate data dirs where the keys are copied
- also removed a few command line options which are no longer necessary
- block proposals originating from a VC are propagated from one BN to the rest properly
- other cleanup & moving code back to since it is no longer used elsewhere
* reorder ssz
* split into hash_trees and ssz_serialization, roughly, for hashing and
IO
* move bitseqs into ssz (from stew)
* clean up imports
* docs, imports
* wip: cache
* cache lists and arrays of complex objects (5x block processing speed
on ncli_db)
trivial baseline cache that stores tree in flat memory structure
* support array of uint64
* work around type issues
* more type compiler bug workarounds
* cache balances, more type fixes
* index type
* ncli_db: add validation flag, better ux
* int64 fixes
* test fix
* "oops"
```
647.913, 0.000, 647.913, 647.913, 1,
Initialize DB
0.540, 0.402, 0.340, 9.451, 619,
Load block from database
40.268, 0.000, 40.268, 40.268, 1,
Load state from database
0.498, 0.150, 0.343, 0.930, 596,
Apply block
3.548, 11.005, 0.729, 54.022, 23,
Apply epoch block
```
* support all basic types
* cleanups
* a few more cleanups
* switch state transition caching usage to shuffled active validator indices to match EpochRef
* refactor the EpochRef -> StateCache transformation; elide pointless mapIt
* limit state passed between get_beacon_committee(...) and compute_committee(...)
* tweaks
* plumbing between block pool and state transition functions around active validator indices and committees
* have shared epochrefs followed by blockref tree while allowing for skipped slots
* factor out the epoch info extraction; document how the EpochRef follows forks
* be stricter about SSZ length prefix
* compute zeroHash list at compile time
* remove SSZ schema stuff
* move SSZ navigation to ncli
* cleanup a few leftover openArray uses
- we have a new binary which connects via RPC to the respective BN and has an internal clock - waking it up on every slot
- the BN has a new option called --external-validators and currently in order to have the VC binaries to run we need to pass EXTERNAL_VALIDATORS=yes to make
- factored some code out of beacon_node.nim for easier reuse in validator_api.nim and validator_client.nim
- the VC loads its associated private keys from the datadir for its BN
- most of the validator API calls have been implemented as a stub.
- the VC polls its BN at the start of each epoch - getting a list of all active validators for the current epoch - and then continues to request blocks and sign them with its appropriate validators when necessary
* in makeBeaconBlock - use rollback instead
* in tests - this helps state_sim give more accurate data and makes it
30% faster
* fix some usages of raw BeaconState
* update more spec refs in beacon_chain/spec/presets; skip skipped constant sanity checks also from markdown reports' perspectives
* mark skipped as skipped in markdown
* sync fixes
* fix Status message finalized info
* work around sync starting before initial status exchange
* don't fail block on deposit signature check failure (fixes#989)
* print ForkDigest and Version nicely
* dump incoming blocks
* fix crash when libp2p peer connection is closed
* update chunk size to 16 to work around missing blocks when syncing
* bump libp2p
* bump libp2p
* better deposit skip message
* fix some warnings related to beacon_node splitting; reimplement finalization verification more robustly; improve attestation pool block selection logic
* re-add missing import
* whitelist allowed state transition flags and make rollback/restore naming more consistent
* restore usage of update flags passed into skipAndUpdateState(...) in addition to the potential verifyFinalization flag
* switch rest of rollback -> restore
When replaying state transitions, for the slots that have a block, the
state root is taken from the block. For slots that lack a block, it's
currently calculated using hash_tree_root which is expensive.
Caching the empty slot state roots helps us avoid recalculating this
hash, meaning that for replay, hashes are never calculated. This turns
blocks into fairly lightweight "state-diffs"!
* avoid re-saving state when replaying blocks
* advance empty slots slot-by-slot and save root
* fix sim randomness
* fix sim genesis filename
* introduce `isEpoch` to check if a slot is an epoch slot
* remove near-duplicate code paths: process_slot(), process_slots(), and state_transition() for BeaconState are now wrappers around the HashedBeaconState versions
* convert tests/test_state_transition.nim to use HashedBeaconState
* convert mocking infrastructure and spec_block/epoch_processing tests to use HashedBeaconBlock, and remove thus unused process_slot*(state: var BeaconState)
* ssz: move ref support outside
Instead of allocating ref's inside SSZ, move it to separate helper:
* makes `ref` allocations explicit
* less magic inside SSZ
* `ref` in nim generally means reference whereas SSZ was loading as
value - if a type indeed used references it would get copies instead of
references to a single value on roundtrip which is unexpected
TODO: EF tests would benefit from some refactoring since they all do the
same thing practically..
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
* add another check for inconsistent aggregation and committee length, since ncli_transition bypasses process_attestation(...)/check_attestation(...) and calls almost directly into process_epoch(...)
* bump validator functions to v0.11.1 spec references
* bump some spec references to v0.11.1
* poke
* reduce stack space usage in process_final_updates(...) to avoid fuzzed segfault in https://github.com/status-im/nim-beacon-chain/issues/921
* document motivation behind manually constructing hash_tree_root of a HistoricalBatch
* fix mainnet finalization and swith eth2_network_simulation to a kind of small-mainnet profile
* Fix slot reference in trace logging
* bump a couple of spec refs from v0.11.0 to v0.11.1
* bump another spec ref to v0.11.1, one more try at Jenkins test vector download CI issue
* fix other slot reference in trace logging and skip past single-block/multi-slot gaps to re-approach from ancestry side by state_transitioning, by requiring exact match on both root hash and slot for fast path
* make more precise the fast path condition
* redo logic to make uniform with BeaconChainDB; fix chronos deprecation warning
* revert not-working replacement of deprecated chronos futures `or`
* switch testnet1 to mainnet
* fix warnings by switching from deprecated chronos API addTimer(...) to setTimer(...) and removing especially some unnecessary chronicles and extras imports from test suite modules
* update a couple v0.10.1 spec references to v0.11.1
* crypto: cleanup
* fix several Defect-on-user-input
* make crypto interface more similar to secp
* use `crypto.nim` in all of nbc
* digest: raises
* fix
* vendor
* remove all but one UnusedImport warning
* bump a few more spec version references from v0.10.1 to v0.11.1
* more v0.10.1 spec reference updates/removals
* yet more v0.10.1 spec reference updates
* refactor and fix merkle proof construction in test suite and thereby remove most remaining skipMerkleValidation flags, now unnecessary
* a few non-semantic comment update/removals
* initial attestation aggregation
* fix usage of committee index, vs index in committee; uniformly set trailing/following distance; document how the only-broadcast-if mechanism works better and what aggregation already happens, not otherwise sufficiently clear; use correct BlockSlot across epoch boundaries
* address inconsistent notion of which slot in past to target for aggregate broadcast; follow 0.11.x aggregate broadcast p2p interface topic
* Fix get_slot_signature(...) call after get_domain(...) change required genesis_validators_root
* mark all spec references which aren't dealt with in other PRs as v0.11.1
* update two more spec refs to v0.11.1
* initial extended validation setup
* flesh out all TODO items for attestation and beaconblock verification
* fix finalization and add chronicles debugging messages
* directly use blockPool.headState rather than pointlessly updating it and document this constraint
* fix logic relating to first-attestation checking; support validating blocks across multiple forks
* initial 0.11.1 spec commit; no test regressions and finalizes in eth2_network_simulation
* with BLS 0.10/0.11 available, stop skipping attester slashing, proposer slashing, and voluntary exist operations fixture tests
* switch param orders to group state.{fork, genesis_validators_root}; bump spec/datatypes spec version for network purposes
* mark attestation construction and broadcast and some minimal/mainnet constants as 0.11.1-compatible; remove phase 1 sharding constants from minimal which don't exist in that preset
* complete (except for get_domain(...)) 0.11.0 beacon chain spec update
* mark compute_start_slot_at_epoch(...), is_active_validator(...), compute_signing_root(...), and get_seed(...) as 0.11.0
* Initial implementation of runtime bls skipping.
Add libnfuzz skipBLSValidation handling, check that it propagates.
* Rename skipBLSValidation -> skipBlsValidation, start skipStateRootValidation
* Replace skipValidation flags with more granular flags.
Also added skipBlockParentRootValidation flag
Mainly replaced with skipBlsValidation but also StateRoot or
BlockParentRootValidation flags where appropriate.
* Adjust interop test to pass when skipping merkle validation.
* Stop skipping validation for mainchain_monitor.
* Remove comment.
* Also skipMerkleValidation for test_beacon_chain_db.
* beacon node code cleanup
* rudimentary error checking on mainnet monitor
* start client even when sending deposit
* work around missing block number exception
* connect to testnet with web3 url
* pretty-print digests in json
* update to 0.10.1
* SSZ Generic and nbench uses the v0.10.1 fixtures
* Tests + spec links: v0.10.0 -> v0.10.1
* Add v0.10.1 TODO in get_latest_attesting_balance (forkchoice)
* SSZ Bytes are now ByteList
* Remove nim-result submodules that was leftover/added by mistake in the branch
The loader has been tested with the presets published by Lighthouse.
You can try connecting to one of their testnets by running:
cd nim-beacon-chain
./connect-to-testnet lighthouse/testnet0
* simplify data storage to key-value, tries are not relevant for NBC
* locked-down version of lmdb dependency
* easier to build / maintain on various platforms
* nbench PoC
* Remove the yaml files from the example scenarios
* update README with current status
* Add an alternative implementation that uses defer
* Forgot to add the old proc body
* slots-processing
* allow benching state_transition failures
* Add Attestations processing (workaround confutils bug:
- https://github.com/status-im/nim-confutils/issues/10
- https://github.com/status-im/nim-confutils/issues/11
- https://github.com/status-im/nim-confutils/issues/12
* Add CLI command in the readme
* Filter report and add notes about CPU cycles
* Report averages
* Add debugecho style time/cycle print
* Report when we skip BLS and state root verification
* Update to 0.9.3
* Generalize scenario parsing
* Support all block processing scenarios
* parallel bench runner PoC
* gitBetter load issues reporting (the load issues were invalid signature and expected to fail)
* re-enable test_interop based on zcli with 0.9.1 specs and update initialize_beacon_state_from_eth1(...) to 0.9.1
* switch many procs to funcs
* fix import os.nim instead; ospaths is deprecated [Deprecated] warnings