5d8cdb88c6
update validator metrics on startup
2020-12-16 20:44:48 +02:00
de779c7812
update validator metrics on startup
2020-12-16 19:42:19 +02:00
fea2b712f0
cache not needed to validate exits ( #2188 )
2020-12-16 15:36:02 +01:00
7d5edb4353
use new stew helpers for assignment ( #2172 )
...
* bump libp2p (reduces libp2p gossip memory usage to ~1/3)
* use "generic" assign version
2020-12-16 09:37:22 +01:00
c56677867b
Remove some accidentally left debugging changes
2020-12-16 01:09:19 +02:00
8ebf9c30b0
More complete reset of the web3 provider on each failure; Fix #2184
2020-12-16 00:21:11 +02:00
d59fc8ff5b
readd os import, sometimes used
2020-12-15 16:34:56 +01:00
91786686d5
don't repeat already-included attestations ( #2061 )
...
Don't repeat already-included attestations
Also removes the superfluous (and badly scaling) attestation-cache-eviction
2020-12-15 17:16:10 +02:00
4e191a06ac
use stew/leb128
...
* 3 varint parsers -> 1
* 1/3 memory usage / allocations when writing stuff to libp2p
2020-12-15 17:06:15 +02:00
9211b1ca03
import fixes
2020-12-15 16:19:46 +02:00
8d1443f03c
detect already-aggregate-voted condition before attestation pool; add is_aggregator tests ( #2170 )
...
* detect already-aggregate-voted condition before attestation pool; add is_aggregator tests
* replace pair of attestation-per-epoch tracking lists with single list and remove Option use
* fix attestation condition
* use safer type conversions; add more is_aggregator tests
2020-12-14 20:58:32 +00:00
9daf6be73c
graceful exit on SIGTERM ( #2178 )
...
Much easier than convincing all users to change the default signal in
their service definition file to SIGINT.
2020-12-14 16:45:14 +00:00
c91091197f
Lower gossipFactor since we default to 160 peers ( #2169 )
...
And it might potentially send a bit more IHAVE messages then wanted.
2020-12-11 12:15:34 +01:00
bc977799f6
Log warning when running without metrics support
2020-12-10 17:22:29 +02:00
91741326cc
v1.0.3
2020-12-10 02:56:02 +02:00
57fdd87a24
Log Eth1 request failures more precisely
2020-12-10 02:54:58 +02:00
7979fb79d3
Add some useful Eth1 monitor metrics
2020-12-10 02:54:58 +02:00
983b3c9fbf
Add a 'we3 test' command for verifying the compatibility of a web3 provider
2020-12-10 02:54:58 +02:00
0ec90b26a5
Update ENR record with metadata attnets at each attestation subnet cycle ( #2148 )
2020-12-09 10:13:51 +01:00
8b8b25ddac
always check whether gossip should be enabled in onslotstart ( #2162 )
2020-12-08 18:11:54 +01:00
f10f29d829
avoid some futures and copies in processing pipeline ( #2157 )
...
`addLastNoWait` does the same thing with less task scheduling and
copying
2020-12-08 09:59:40 +01:00
3b06e0f657
directly construct cstring in err() expressions
2020-12-07 22:24:06 +02:00
72d00e33b8
always wait for 2/3 into slot for aggregate attestations ( #2158 )
2020-12-07 20:32:34 +01:00
81c25ca4cd
Disconnect peers on status handshake timeout. ( #2149 )
2020-12-07 19:47:07 +01:00
46c2740097
Documentation for Validators API. ( #2147 )
...
* Recover proper validator API call and remove incorrect one.
Add more examples to API documentation.
2020-12-07 14:51:14 +02:00
32a18769e6
remove waitFor in attestation subnet cycling
2020-12-07 14:48:04 +02:00
26ea76bbdf
don't lag aggregated attestations by a slot ( #2150 )
...
* don't lag aggregated attestations by a slot
* don't use aggregation topic at all
* use aggregates again, but with aggressively low ATTESTATION_PROPAGATION_SLOT_RANGE; seems to hold on to LH 1.0 nodes
* clean up scaffolding and double ATTESTATION_PROPAGATION_SLOT_RANGE to 16
* increase ATTESTATION_PROPAGATION_SLOT_RANGE to 24
* increase ATTESTATION_PROPAGATION_SLOT_RANGE to 28 and isolate in only used function due to customization; remove TRAILING_DISTANCE machinery
2020-12-07 12:56:49 +01:00
7363bf3c7c
Fix a logical typo in beacon_api/validator.getStatus
2020-12-03 21:24:01 +02:00
d302c1d8ee
v1.0.2
2020-12-03 19:17:32 +02:00
f4a3a36731
More specific error message when block validation fails
2020-12-03 11:51:42 +02:00
be107df7f1
status bar: actually display it every second, after updating its data
2020-12-03 11:41:40 +02:00
42dd59852b
Fix compilation problem.
2020-12-03 11:40:32 +02:00
0904ee5609
get_v1_validator_attestation_data() implementation.
2020-12-03 11:40:32 +02:00
f6285d8381
Fix proposeSignedBlock() become sync.
2020-12-03 11:40:08 +02:00
088b001388
Fix get_v1_beacon_states_stateId_committees_epoch() to use optional arguments properly.
...
Optimize get_v1_beacon_pool_attestations() a bit.
2020-12-03 11:40:08 +02:00
21ef0f3a57
Fixes for get_v1_beacon_states_stateId_validators() and get_v1_beacon_states_stateId_validators_validatorId().
2020-12-03 11:40:08 +02:00
9afafb54f5
get_v1_beacon_states_stateId_validator_balances() implementation.
2020-12-03 11:40:08 +02:00
5dade7b441
post_v1_beacon_blocks() implementation.
2020-12-03 11:40:08 +02:00
5f392893c0
Change approach for get_v1_beacon_pool_attestations() to use hexadecimal strings.
2020-12-03 11:40:08 +02:00
9e7f8b37c7
get_v1_beacon_pool_attestations() implementation.
2020-12-03 11:40:08 +02:00
7e4ff7a740
Implementation of post_v1_beacon_pool_attester_slashings() and post_v1_beacon_pool_proposer_slashings().
...
Remove doAssert.
2020-12-03 11:40:08 +02:00
6cae25701b
Implementation of beacon_pool_attester_slashings(), beacon_pool_proposer_slashings() and beacon_pool_voluntary_exits().
2020-12-03 11:40:08 +02:00
027d2547cd
Fix a block proposal issue caused by incorrect merkle proofs
...
The key change here is that `addChunksAndGenMerkleProofs` is called
with all pending deposits instead of just the deposits included in
the block. The later was effectively producing merkle proofs against
a different root.
2020-12-03 11:25:52 +02:00
43662be3f8
v1.0.1
2020-12-02 14:31:13 +02:00
d5e3712609
log errors in more detail when block production fails ( #2135 )
...
* log errors in more detail when block production fails
* pass through block header error
* make everything cstring
2020-12-02 13:23:10 +01:00
94c66f15a9
Wanted peers log message fix ( #2114 )
...
* Edit Peer count low wanted peers log
* remove prometheus folder
* remove prometheus.yml
* Add current peers to low peer count log
* change to 25% peer count notice, 12.5% warning
Co-authored-by: kdeme <kim.demey@gmail.com>
2020-12-02 10:47:23 +01:00
92655f936a
Add backoff for the deposit logs requests as well; More debug logs
2020-12-02 01:43:54 +02:00
7225a6d6ed
Retry all web3 requests up to 3 times with exponential backoff
2020-12-02 01:43:54 +02:00
f3b8c777a7
Strip whitespace.
2020-12-02 01:43:36 +02:00
4feb0a308e
Fix #2125 (ETH status bar display); Bump LibP2P
2020-12-02 00:03:59 +02:00
3e4b49462b
detect excessively long graffiti strings
2020-12-01 15:39:46 +02:00
68c91d1d1b
don't wait until after the first slot to enable gossip
2020-12-01 15:39:03 +02:00
2fd71a9aac
Reduce the rate of requesting deposits to lower the risk of triggering the Infura rate limits
2020-12-01 15:38:50 +02:00
4eaf29875a
Less risk for Eth1-induced delays in block proposal
2020-12-01 15:38:50 +02:00
38f7558e50
Work around a strange codegen issue to fix local sim in CI; Bump LibP2P
2020-12-01 15:38:00 +02:00
3bdda3dd46
Hotfix: use the mainnet bootstrap nodes without specifying --network=mainnet explicitly
2020-12-01 10:44:30 +02:00
4328576e18
Hotfix: 'deposits import' was ignoring its arguments in Linux builds
2020-12-01 00:59:57 +02:00
8327240458
v1.0.0-stateofus
2020-11-29 23:50:13 +02:00
ac9bdde543
Don't rely on a metric value for the ETH display in the status bar
2020-11-29 23:35:39 +02:00
cabb07a186
Apply suggestions from code review
...
Co-authored-by: Sacha Saint-Leger <sacha@status.im>
2020-11-29 23:08:07 +02:00
3c0dfc2fbe
Implement the 'deposits exit' command; Remove 'deposits create'
2020-11-29 23:08:07 +02:00
a2364ce1bc
add getGossipSubPeers RPC ( #2107 )
2020-11-29 20:07:20 +01:00
ae19ab72c0
Implement #2067
2020-11-29 18:27:26 +02:00
c3bfe15a35
increase default max peers ( #2106 )
...
* increase default max peers
also avoid reconnection when opening stream as this might induce
a loop
* Use dial without addresses
* dial back max peers a little
2020-11-29 14:43:41 +01:00
7731109320
Remove getSpecPreset() because of crash and add missing calls into api.md
2020-11-29 11:01:55 +02:00
bf2673abc4
Restore the ETH display in the status bar
2020-11-28 20:53:51 +02:00
8685eb7042
add validator balance metrics
2020-11-28 16:22:09 +02:00
db030eb944
Setup agent/proto version identifiers in libp2p. ( #2079 )
...
* Supply `nim-libp2p` with `agent-string` and `proto-string` as configured parameters.
* Remove protoString and rng check.
* Fix compilation problem.
2020-11-28 08:00:36 +01:00
e7f2735271
fix broken metrics during replay ( #2090 )
...
* move metrics out of state transition
* add validator count metric
* remove expensive beacon_current_validators, beacon_previous_validators
metrics (they should be reimplemented with cache), add cheap
beacon_active_validators to approximate
* remove unused validator count metrics
* tidy imports/defects
2020-11-27 23:16:13 +01:00
2421d338c1
node.network.metadata.attnets is only secondary source of truth ( #2089 )
2020-11-27 15:54:13 +01:00
d16e127daf
Peer stuff ( #2084 )
...
* Revert "Revert "Full "node" RPC calls implementation and fixes to peer lifetime states. (#2065 )" (#2082 )"
This reverts commit 7cc3dc8027
2020-11-26 20:23:45 +01:00
9b9aa93cd4
Seenttl by spec ( #2083 )
...
* add rpc call to get chronos futures at runtime
* add seenTTL gossip parameter
Co-authored-by: Jacek Sieka <jacek@status.im>
2020-11-26 13:08:22 +01:00
687cbaf94c
Adjust number of sync workers from 20 to 10. ( #2077 )
...
Adjust watch task min-pause-time to 1.minute.
Slowed down pause-time recovery by factor 3/4 instead of 1/2.
2020-11-26 09:19:27 +01:00
7cc3dc8027
Revert "Full "node" RPC calls implementation and fixes to peer lifetime states. ( #2065 )" ( #2082 )
...
This reverts commit d041287a4f
2020-11-26 09:05:23 +01:00
d041287a4f
Full "node" RPC calls implementation and fixes to peer lifetime states. ( #2065 )
...
* Initial commit.
* Fix log lines and compilation error.
* Add get_v1_node_peers() implementation.
* Fix peer's lifetime states.
* Use the most recent multiaddress.
* Fix assign NewPeerScore again.
Fix compilation error with last seen address.
Fix Peer upgraded log line place.
* syncing, health, peer_count, peer_id and fixes for identity.
* Fix compilation problems.
* Move object declaration to callsigs.
Fix identity addresses fields.
* Finish node RPC calls.
* Avoid leak of lifetime future.
* Bump chronos.
* Fix json generator problem.
2020-11-26 08:09:59 +01:00
e69b5ff473
Add a record create and print command
2020-11-25 18:32:59 +02:00
3a13750734
Try to obtain deposit contract address from config.
...
Attempt to fix json generation.
2020-11-25 18:30:44 +02:00
68f4ad64a4
Disable exception if depositAddress is not available.
2020-11-25 18:30:44 +02:00
af3862da48
Make depositAddress public in eth1_monitor.
...
Fix representation of config.
Add deposit_contract implementation.
2020-11-25 18:30:44 +02:00
8eafbb4e09
Add config_spec implementation.
2020-11-25 18:30:44 +02:00
3594fa2a22
Version 1.0.0-rc1
2020-11-25 03:13:58 +02:00
b9e4fef616
Check that the selected data dir is compatible with the selected network
2020-11-25 03:13:58 +02:00
e1e4871287
fix time formatting and pre-genesis ops
2020-11-25 01:51:46 +02:00
151d116f02
Fix off-by-one error in Eth1 pruning
2020-11-25 01:51:17 +02:00
a995cdd3d9
Bugfix: fix an incorrect balance increase during genesis state generation
2020-11-24 23:30:26 +02:00
594ef713a0
Increase the web3 timeouts
2020-11-24 23:28:20 +02:00
372c9b798c
Fix the corrupted database state on Pyrmont nodes; Add mainnet genesis ( #2056 )
...
* Handle some web3 timeouts better
* Add support for developer .env files
* Eth1 improvements; Mainnet genesis state
Notable changes:
* The deposits table have been removed from the database. The client
will no longer process all deposits on start-up.
* The network metadata now includes a "state snapshot" of the deposit
contract. This allows the client to skip syncing deposits made prior
to the snapshot (i.e. genesis). Suitable metadata added for Pyrmont
and Mainnet.
* The Eth1 monitor won't be started unless there are validators attached
to the node.
* The genesis detection code is now optional and disabled by default
* Bugfix: The client should not produce blocks that will fail validation
when it hasn't downloaded the latest deposits yet
* Bugfix: Work around the database corruption affecting Pyrmont nodes
* Remove metadata for Toledo and Medalla
2020-11-24 22:21:47 +01:00
040093a945
medalla -> pyrmont ( #2062 )
2020-11-23 17:46:51 +01:00
6f476ca380
Gossip11 params ( #2047 )
...
* add rpc call to get chronos futures at runtime
* add eth2 spec gossip parameters
* bump libp2p
* fix url, remove 1.0
Co-authored-by: Jacek Sieka <jacek@status.im>
2020-11-23 10:57:03 +01:00
672915e170
work around long pyrmont startup time ( #2060 )
...
* also fixes unnecessary copy/memory alloc when loading DbSeq entries
2020-11-21 18:53:40 +01:00
00aedddf2a
Version 0.6.6
2020-11-20 22:31:03 +02:00
dbcc0686ff
delay pruning of cache for finalized epoch ( fixes #2049 )
2020-11-20 20:57:50 +02:00
316a19af5f
Address review comments
2020-11-20 17:13:51 +02:00
d232f16b40
Add more eth1-related logging
2020-11-20 17:13:51 +02:00
e22248bca1
Tentative fix for the Pyrmont Eth1 voting issue
2020-11-20 17:13:51 +02:00
3c4cf95d0e
remove v0.12.3 and medalla support ( #2038 )
2020-11-20 14:49:49 +01:00
54c388b7b4
close slashing protection database ( #2050 )
2020-11-20 14:23:55 +01:00
1d7fb2ed0c
remove {.inline.} pragmas ( #2033 )
...
* remove {.inline.} pragmas
* re-add inline on bitseqs functions and tweak inlining threshold
* remove macOS/LLVM inlining setting; revert non-init/module-local/tests inline pragma removal
2020-11-20 11:00:22 +01:00
883e18da81
Hotfix: don't crash on web3 provider errors during initialization
2020-11-20 10:26:47 +02:00
771c1d092a
hotfix fork choice score application ( #2041 )
...
Depending on the order of nodes in fork choice, it seems that the break
here could cause some scores not to be applied correctly
2020-11-19 15:11:08 +01:00
e370e80aee
Add more Pyrmont bootstrap nodes
2020-11-18 14:40:45 +02:00
6b6e9b4d77
v0.6.4 Script and instructions for joining Pyrmont; WIP page in the book
2020-11-18 00:27:22 +02:00
11e1a9e8e8
A hacky work-around for a web3 issue that may cause the client to go into a loop of failing requests
2020-11-18 00:27:21 +02:00
ebfacf597c
Review and fix some usages of Future.cancel; Bump Chronos
2020-11-18 00:27:21 +02:00
9c5cef346b
set file and dir permissions
2020-11-17 23:28:26 +02:00
4479c0a9f1
fix some libp2p channel hangs ( #2032 )
...
* fix some libp2p channel hangs
* make sure no concurrent reads are issues by awaiting cancellations
* bumps with fixes
* merge bump
2020-11-17 16:07:05 +01:00
9e716b32bd
address some XDeclaredButNotUsed hints ( #2028 )
2020-11-17 11:14:53 +01:00
a6b188bfd4
misc fixes ( #2027 )
...
* log when database is loading (to avoid confusion)
* generate network keys later during startup
* fix quarantine not scheduling chain of parents for download and
increase size to one epoch
* log validator count, enr and peerid more clearly on startup
2020-11-16 20:15:43 +01:00
21c4ce8fd4
remove superfluous TODOs/not-really-TODOs, type conversion, imports ( #2025 )
2020-11-16 17:10:51 +01:00
19707e89c2
Change random network key log line and include PeerID.
2020-11-16 17:41:23 +02:00
5b011b65ae
add rpc call to get chronos futures at runtime
2020-11-16 12:31:39 +02:00
e2f161dbf7
fix attestation sending schedules to avoid timing attack ( #1995 )
2020-11-16 10:44:18 +01:00
b022dc4d1f
Use O(n) algorithm in initialize_beacon_state_from_eth1; Avoid unnecessary merkle proofs generation
2020-11-15 21:40:40 +02:00
8012102704
Bugfix: the client can miss the genesis event in the absence of new deposits
2020-11-15 21:40:40 +02:00
9f28a464fb
[skip ci] Update the version number
2020-11-14 23:26:46 +02:00
d02d8f8d51
Drop UseDiscv51 flag and only support discovery v5.1
2020-11-14 19:12:30 +02:00
80ca7a2d9f
Implement #1768
2020-11-12 22:29:43 +02:00
17d35e1fd9
Allow the node to start when it fails to initialize the Eth1 monitor
...
* Avoid hangs when wss:// is specified for a non-secure HTTP server
* Produce an ERROR when the web3 provider is unsupported, but still launch the node
2020-11-12 22:29:43 +02:00
5e45e7429e
Rewrite all HTTP(S) web3 URLs to WebSocket URls
2020-11-12 22:29:43 +02:00
87c92ea05f
Address review comments.
...
Remove `-8.0` bucket because `-4.0` is a limit.
2020-11-12 21:52:01 +02:00
dbb058682c
Add beacon_attestation_sent_delay metric.
2020-11-12 21:52:01 +02:00
8ad45de65b
Add makefile targets for Pyrmont
2020-11-12 21:51:15 +02:00
b9e122a60c
address some TODOs ( #2005 )
2020-11-12 19:24:07 +00:00
e035b7d0c9
Fix status rpc request to use RESP_TIMEOUT. ( #2002 )
2020-11-12 15:30:12 +00:00
754d65c159
non-spec aggregate validation check now in spec; update genesis times ( #2001 )
2020-11-12 15:29:32 +00:00
a0621d52f6
bump remaining rc.0 spec ref ( #2003 )
2020-11-12 13:58:41 +00:00
f642f71457
Calculate how much time syncing takes, and show it at statusbar.
2020-11-12 14:16:12 +02:00
332e248d91
rpc: setLogLevel ( #1991 )
...
* rpc: setLogLevel
also change default rpc port to match makefile and manual
* set topic-level formats too
and make feature less secret
2020-11-12 11:46:02 +01:00
43c6c5a0b3
Gossip message id should decompress data ( #1998 )
...
* also fix missing return on empty message
2020-11-12 11:45:28 +01:00
5644cfae8f
increase max db object size ( fixes #1996 )
2020-11-12 08:42:45 +01:00
c5710d97fc
default to gossipsub 1.1 ( #1992 )
2020-11-11 13:30:18 +01:00
389c11743a
Review TODO items and self-assign the most important ones
2020-11-10 20:41:04 +02:00
6e40ca5e15
Use separate cache for getting epochref
...
...else tmpState gets overwritten when producing blocks and requesting
epochRef for finalized state.
2020-11-10 17:40:32 +02:00
ea4d94c65c
Add guard task to monitor synchronization worker Future. ( #1972 )
...
* Add guard task to monitor synchronization worker Future.
* Change log events from debug to warning level.
2020-11-10 14:47:26 +01:00
7eaae89263
keep AllTests-mainnet.md consistent; ensure don't send overly large messages aren't sent ( #1973 )
2020-11-09 18:11:09 +00:00
a010ef2061
update tests from v1.0.0-rc.0 to v1.0.0 ( #1976 )
2020-11-09 17:44:18 +00:00
bd1047b715
0.6.0 release fixes
...
* Updated README
* No double v in nimbus_beacon_node --version
* No md5 checksums
2020-11-09 17:09:49 +02:00
271df8b604
bump 1.0.0rc-0 spec refs to 1.0.0 ( #1974 )
2020-11-09 14:18:55 +00:00
61a3209c24
remove version quotes
2020-11-09 13:37:58 +01:00
94e9ce3c1f
Add metadata for the toledo network
2020-11-09 11:38:52 +02:00
4b603d7f5a
Change the default log level to INFO
2020-11-09 11:38:52 +02:00
e9b9cd75ee
Rename binaries; Mimic the original repo layout in the distribution
2020-11-09 11:38:52 +02:00
bf58915500
release fixes ( #1966 )
2020-11-07 08:46:53 +01:00
d2476b643a
bump version ( #1964 )
...
* bump version
* update version format to "standard" style
* remove zinken/attacknet (both networks deprecated)
* add mainnet warning
2020-11-07 08:45:55 +01:00
fb6ce5c804
Enable discv5.1 for general beacon_node and inspector builds
2020-11-07 01:27:02 +02:00
ac1072b4bb
Add ./run-medalla-beacon-node script
2020-11-07 01:25:02 +02:00
4a710252d8
Check the web3 provider for network compatibility
2020-11-07 01:25:02 +02:00
24f8b7d483
[skip ci] Clean up some accidentally commited code
2020-11-06 11:53:44 +02:00
a8a66fe3f6
Fix #1784 ; Handle Infura HTTPS URLs
2020-11-06 11:15:32 +02:00
f596a24c4c
Mainnet deposit contract monitoring
2020-11-06 11:15:32 +02:00
Jacek Sieka
Zahary Karadjov
tersec
Ștefan Talpalaru
Giovanni Petrantoni
Kim De Mey
Eugene Kabanov
Sacha Saint-Leger