Adds a `LightClient` instance to the beacon node as preparation to
accelerate syncing in the future (optimistic sync).
- `--light-client-enable` turns on the feature
- `--light-client-trusted-block-root` configures block to start from
If no block root is configured, light client tracks DAG `finalizedHead`.
Introduces a new library for syncing using libp2p based light client
sync protocol, and adds a new `nimbus_light_client` executable that uses
this library for syncing. The new executable emits log messages when
new beacon block headers are received, and is integrated into testing.
Incorporates the latest changes to the light client sync protocol based
on Devconnect AMS feedback. Note that this breaks compatibility with the
previous prototype, due to changes to data structures and endpoints.
See https://github.com/ethereum/consensus-specs/pull/2802
Other changes:
* logtrace can now verify sync committee messages and contributions
* Many unnecessary use of pairs() have been removed for consistency
* Map 40x BN response codes to BeaconNodeStatus.Incompatible in the VC
* use MAX_CHUNK_SIZE_BELLATRIX for signed Bellatrix blocks
* Update beacon_chain/networking/eth2_network.nim
Co-authored-by: Etan Kissling <etan@status.im>
* localPassC to localPassc
* check against maxChunkSize rather than constant
Co-authored-by: Etan Kissling <etan@status.im>
This PR makes the necessary adjustments to deal with the revamped snappy
API.
In practical terms for nimbus-eth2, there are performance increases to
gossip processing, database reading and writing as well as era file
processing. Exporting `.era` files for example, a snappy-heavy
operation, almost halves in total processing time:
Pre:
```
Average, StdDev, Min, Max, Samples, Test
39.088, 8.735, 23.619, 53.301, 50, tState
237.079, 46.692, 165.620, 355.481, 49, tBlocks
```
Post:
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
25.350, 5.303, 15.351, 41.856, 50, tState
141.238, 24.164, 99.990, 199.329, 49, tBlocks
```
* Add `NoMonitor` flag to stop SyncManager from monitoring sync situation.
* Remove `toleranceValue` and `PeerScoreHeadTooNew`.
Co-authored-by: Etan Kissling <etan@status.im>
* `gnosis-chain` -> `gnosis`
Use same name as LH/Teku throughout
* fixes#3504
* fixes large stack temporary that can cause crashes during genesis
detection
Some upstream repos still need fixes, but this gets us close enough that
style hints can be enabled by default.
In general, "canonical" spellings are preferred even if they violate
nep-1 - this applies in particular to spec-related stuff like
`genesis_validators_root` which appears throughout the codebase.
The `pyrmont` testnet has been discontinued.
For experiments, it's still possible to run pyrmont nodes by passing a
genesis/config, but this PR removes the bundled `--network:pyrmont`
option.
* update docs
* remove empty docs
* remove obsolete `eth2-stats` page
This file is not actually used / useful - should metadata persistence
support be added in the future, it needs to be done with a new file such
that downgrades, that have the TODO logic unimplemented, don't break.
The pre-release light client sync protocol defines additional Req/Resp
messages to be made available when `--serve-light-client-data` is set.
This patch extends the `{.libp2pProtocol.}` pragma with an optional
parameter to tag such light client sync protocol specific messages.
The corresponding protocols are only selectively registered with libp2p.
The `p2p-interface.md` spec defines a `ResourceUnavailable` error to
return in situations where data that exists on the network is locally
unavailable, e.g., when a block within `MIN_EPOCHS_FOR_BLOCK_REQUESTS`
is requested by `BeaconBlocksByRange` but cannot be provided. This patch
adds support for that additional error code.
* Support for Gnosis Chain
`make gnosis-chain-build` will build the Nimbus gnosis chain binary,
stored in `build/nimbus_beacon_node_for_gnosis_chain`.
`make gnosis-chain` will connect to the network.
Other changes:
* Restore compilation with -d:has_genesis_detection
* Removed Makefile target related to testnet0 and testnet1
* Added more debug logging for failed peer handshakes
* Report misconfigured builds which try to embed network metadata
that is incompatible with the currently selected const preset.
* Don't bundle network metadata in minimal builds, as they are not compatible
* harden and speed up block sync
The `GetBlockBy*` server implementation currently reads SSZ bytes from
database, deserializes them into a Nim object then serializes them right
back to SSZ - here, we eliminate the deser/ser steps and send the bytes
straight to the network. Unfortunately, the snappy recoding must still
be done because of differences in framing.
Also, the quota system makes one giant request for quota right before
sending all blocks - this means that a 1024 block request will be
"paused" for a long time, then all blocks will be sent at once causing a
spike in database reads which potentially will see the reading client
time out before any block is sent.
Finally, on the reading side we make several copies of blocks as they
travel through various queues - this was not noticeable before but
becomes a problem in two cases: bellatrix blocks are up to 10mb (instead
of .. 30-40kb) and when backfilling, we process a lot more of them a lot
faster.
* fix status comparisons for nodes syncing from genesis (#3327 was a bit
too hard)
* don't hit database at all for post-altair slots in GetBlock v1
requests
- Request metadata_v2 (altair) by default instead of the v1
- Change the metadata pinger to a 3 failure-then-kick, instead of being time based
- Update kicker scorer to take into account topics which we're not subscribed to, to be sure that we will be able to publish correctly
- Add some metrics to give "fanout" health (in the same spirit of mesh health)
* Harden handling of unviable forks
In our current handling of unviable forks, we allow peers to send us
blocks that come from a different fork - this is not necessarily an
error as it can happen naturally, but it does open up the client to a
case where the same unviable fork keeps getting requested - rather than
allowing this to happen, we'll now give these peers a small negative
score - if it keeps happening, we'll disconnect them.
* keep track of unviable forks in quarantine, to avoid filling it with
known junk
* collect peer scores in single module
* descore peers when they send unviable blocks during sync
* don't give score for duplicate blocks
* increase quarantine size to a level that allows finality to happen
under optimal conditions - this helps avoid downloading the same blocks
over and over in case of an unviable fork
* increase initial score for new peers to make room for one more failure
before disconnection
* log and score invalid/unviable blocks in requestmanager too
* avoid ChainDAG dependency in quarantine
* reject gossip blocks with unviable parent
* continue processing unviable sync blocks in order to build unviable
dag
* docs
* Update beacon_chain/consensus_object_pools/block_pools_types.nim
* add unviable queue test
The new format is based on compressed CSV files in two channels:
* Detailed per-epoch data
* Aggregated "daily" summaries
The use of append-only CSV file speeds up significantly the epoch
processing speed during data generation. The use of compression
results in smaller storage requirements overall. The use of the
aggregated files has a very minor cost in both CPU and storage,
but leads to near interactive speed for report generation.
Other changes:
- Implemented support for graceful shut downs to avoid corrupting
the saved files.
- Fixed a memory leak caused by lacking `StateCache` clean up on each
iteration.
- Addressed review comments
- Moved the rewards and penalties calculation code in a separate module
Required invasive changes to existing modules:
- The `data` field of the `KeyedBlockRef` type is made public to be used
by the validator rewards monitor's Chain DAG update procedure.
- The `getForkedBlock` procedure from the `blockchain_dag.nim` module
is made public to be used by the validator rewards monitor's Chain DAG
update procedure.
* Harden CommitteeIndex, SubnetId, SyncSubcommitteeIndex
Harden the use of `CommitteeIndex` et al to prevent future issues by
using a distinct type, then validating before use in several cases -
datatypes in spec are kept simple though so that invalid data still can
be read.
* fix invalid epoch used in REST
`/eth/v1/beacon/states/{state_id}/committees` committee length (could
return invalid data)
* normalize some variable names
* normalize committee index loops
* fix `RestAttesterDuty` to use `uint64` for `validator_committee_index`
* validate `CommitteeIndex` on ingress in REST API
* update rest rules with stricter parsing
* better REST serializers
* save lots of memory by not using `zip` ...at least a few bytes!
* Tune getLowSubnets
* Also aim for dHigh peers in gossipsub
* Apply suggestions from code review
Co-authored-by: Jacek Sieka <jacek@status.im>
Co-authored-by: Jacek Sieka <jacek@status.im>
* support GOSSIP_MAX_SIZE_MERGE-sized blocks; prevent fork choice clock stutter via aggregate attestations
* relay max gossip size to libp2p, use tight uncompressed bounds for fixed-size messages
* Update beacon_chain/networking/eth2_network.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
* Update beacon_chain/networking/eth2_network.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
Co-authored-by: Jacek Sieka <jacek@status.im>
* fix stack overflow crash in REST/debug/getStateV2
* introduce `ForkyXxx` for generic type matching of `Xxx` across
branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) -
`Some` is already used for other types of type classes
* consolidate function naming in BeaconChainDB, use some generics
* import `forks.nim` from other spec modules and move `Forked*` helpers
around to resolve circular imports
* remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout
(less data shuffling between the types)
* fix several cases of states being stored on stack in tests, causing
random failures on some platforms
* remove reading json support from ncli - this should be ported to the
rest json reading instead (doesn't currently work because stack sizes)
* auto-bump nim-libp2p
* Remove peer info for other peers
Not definitive, just to test the libp2p's unstable branch
* finish up Remove peer info for other peers
* getKey -> getPublicKey
* bump libp2p
* libp2p bump
Co-authored-by: = <Menduist@users.noreply.github.com>
Co-authored-by: Tanguy <tanguy@status.im>
* `SyncCommitteeIndex` -> `SyncSubcommitteeIndex`
* `syncCommitteePeriod` -> `sync_committee_period` (spec spelling)
* tighten period comparisons
* fix assert when validating committee message with non-altair state in
REST api
* register vc duties with subnet tracker
* fix activation logging during startup
* cache slot signature to avoid duplicate signature work
* schedule aggregation duties one slot at a time to avoid CPU spike at
each epoch
* lower aggregation subnet pre-subscription time to 4 slots (lowers
bandwidth and CPU usage)
* update stability subnets in ENR on startup
* log gossip state
* perform gossip subscriptions just before the next slot starts
* document stuff
* add random include
* don't overwrite subscription state when not subscribed
* log target gossip state
* updating gossip status once is enough
* add test
* remove syncQueueLen - this one is not updated at the end of the sync
and may cause gossip to disconnect itself completely - use a simple head
distance instead
* fix gossip disconnection - if in hysteresis, node.gossipState will be
set to disabled even though we don't disable topic subscriptions
* fix extra duty registration call
* "official" -> "scenarios", like the submodule
* fewer test binaries - various compile hacks have been improved over
time, test suite should follow
* remove obsolete bls tests - there are better test vectors in
nim-blscurve
* remove obsolete mentions of `ssz_testing`
* remove obsolete comments about proc vs globals, unittest2 already uses
proc's
There are a few locations in the code that compare the current epoch to
the various FORK_EPOCH constants and branch off into fork-specific code.
When a new fork is introduced, it is sometimes forgotten to update all
of those branch locations. This patch introduces a compile-time check
that ensures that all branches need to be covered exhaustively. This is
done by replacing if-elif structures with case expressions.
There are still a few cases with manual loops through sync subcommittees
even though an `allSyncCommittees` iterator exists. Adjusted the few
remaining instances to also use the iterator instead.
Some clients disable their metadata V1 after the Altair fork, so we are unable to ping them correctly.
This PR adds a fallback to try metadata V2 if V1 fails.
* Fix getForkSchedule call.
Create cache of all configuration endpoints at node startup.
Add prepareJsonResponse() call to create cached responses.
Mark all procedures with `raises`.
* Add getForkSchedule to VC.
Fix getForkSchedule return type for API.
More `raises` annotations.
Fix VC fork_service.nim.
* Use `push raises` instead of inline `raises`.
* Improvements for REST API aggregated attestations and attestations processing.
* Rename eth2_network.sendXXX procedures to eth2_network.broadcastXXX.
Add broadcastBeaconBlock() and broadcastAggregateAndProof().
Fix links to specification in REST API declarations.
Add implementation for v2 getStateV2().
Add validator_duties.sendXXX procedures which not only broadcast data, but also validate it.
Fix JSON-RPC/REST to use new validator_duties.sendXXX procedures instead of own implementations.
* Fix validator_client online nodes count incorrect value.
Fix aggregate and proof attestation could be sent too late.
* Adding timeout for block wait in attestations processing.
Fix compilation errors.
* Attempt to debug aggregate and proofs.
* Fix Beacon AIP to use `sendAttestation`.
Add link comment to produceBlockV2.
* Add debug logs before publish operation for blocks, attestations and aggregated attestations.
Fix attestations publishing issue.
* logging fixes
`indexInCommnittee` already logged in attestation
Co-authored-by: Jacek Sieka <jacek@status.im>