Commit Graph

110 Commits

Author SHA1 Message Date
zah a2ba34f686
Implement all sync committee duties in the validator client (#3583)
Other changes:

* logtrace can now verify sync committee messages and contributions
* Many unnecessary use of pairs() have been removed for consistency
* Map 40x BN response codes to BeaconNodeStatus.Incompatible in the VC
2022-05-10 10:03:40 +00:00
Jacek Sieka c6915ed3e0
remove faststreams backend for eth2_network (#3617)
unmaintained, incompatible with altair+
2022-05-08 09:08:13 +02:00
Jacek Sieka 138c40161d
avoid unnecessary recompression in block protocol (#3598)
Blocks can be sent straight from compressed data sources

Co-authored-by: Etan Kissling <etan@status.im>
2022-05-05 11:00:02 +00:00
tersec 7bb40d28ae
ensure MAX_CHUNK_SIZE usage consistent in sync_protocol (#3615) 2022-05-05 09:17:14 +00:00
tersec 4a372410a4
use MAX_CHUNK_SIZE_BELLATRIX for signed Bellatrix blocks (#3613)
* use MAX_CHUNK_SIZE_BELLATRIX for signed Bellatrix blocks

* Update beacon_chain/networking/eth2_network.nim

Co-authored-by: Etan Kissling <etan@status.im>

* localPassC to localPassc

* check against maxChunkSize rather than constant

Co-authored-by: Etan Kissling <etan@status.im>
2022-05-05 05:45:35 +00:00
tersec a1ae53fbdf
don't always broadcast sync contributions and aggregates on Altair topics (#3611) 2022-04-28 10:51:49 +00:00
Jacek Sieka d0dbc4a8f9
Snappy revamp (#3564)
This PR makes the necessary adjustments to deal with the revamped snappy
API.

In practical terms for nimbus-eth2, there are performance increases to
gossip processing, database reading and writing as well as era file
processing. Exporting `.era` files for example, a snappy-heavy
operation, almost halves in total processing time:

Pre:

```
     Average,       StdDev,          Min,          Max,      Samples,         Test
      39.088,        8.735,       23.619,       53.301,           50, tState
     237.079,       46.692,      165.620,      355.481,           49, tBlocks
```

Post:

```
All time are ms
     Average,       StdDev,          Min,          Max,      Samples,         Test
      25.350,        5.303,       15.351,       41.856,           50, tState
     141.238,       24.164,       99.990,      199.329,           49, tBlocks
```
2022-04-15 09:44:06 +02:00
Jacek Sieka f70ff38b53
enable `styleCheck:usages` (#3573)
Some upstream repos still need fixes, but this gets us close enough that
style hints can be enabled by default.

In general, "canonical" spellings are preferred even if they violate
nep-1 - this applies in particular to spec-related stuff like
`genesis_validators_root` which appears throughout the codebase.
2022-04-08 16:22:49 +00:00
Etan Kissling 509aa6c252
serve light client data on `prater` by default (#3559)
Applies a `prater` testnet specific config default to serve light client
data on that network.
2022-04-01 23:58:06 +02:00
Jacek Sieka 4a237cb908
enable chronosStrictException (#3533)
* bump nim-json-rpc
2022-03-22 09:42:28 +01:00
Jacek Sieka 0db1e768e4
don't write `node-metadata.json` on startup (#3515)
This file is not actually used / useful - should metadata persistence
support be added in the future, it needs to be done with a new file such
that downgrades, that have the TODO logic unimplemented, don't break.
2022-03-18 12:36:50 +01:00
Etan Kissling 9f8894fb43
broadcast optimistic light client updates (#3499)
After proposing a new block, broadcasts a `OptimisticLightClientUpdate`.
Works for both locally proposed blocks as well as VC submitted ones.
2022-03-17 21:11:29 +01:00
Etan Kissling 9a2b50d2c6
allow tagging light client specific libp2p messages (#3485)
The pre-release light client sync protocol defines additional Req/Resp
messages to be made available when `--serve-light-client-data` is set.
This patch extends the `{.libp2pProtocol.}` pragma with an optional
parameter to tag such light client sync protocol specific messages.
The corresponding protocols are only selectively registered with libp2p.
2022-03-17 16:09:18 +02:00
tersec 8fbcf29775
update unchanged specs/phase0/p2p-interface.md URL references from v1.1.9 to v1.1.10 (#3510) 2022-03-16 10:40:35 +00:00
Tanguy f589bf2119
Peer dialing/kicking system overhaul (#3346)
* Force dial + excess peer trimmer
* Ensure we always have outgoing peers
* Add configurable hard-max-peers
2022-03-11 10:51:53 +00:00
Etan Kissling 64242d9c84
add support for `ResourceUnavailable` p2p error (#3476)
The `p2p-interface.md` spec defines a `ResourceUnavailable` error to
return in situations where data that exists on the network is locally
unavailable, e.g., when a block within `MIN_EPOCHS_FOR_BLOCK_REQUESTS`
is requested by `BeaconBlocksByRange` but cannot be provided. This patch
adds support for that additional error code.
2022-03-09 14:03:58 +00:00
Tanguy 266fd98a13
Don't store invalid gossipsub messages (#3471) 2022-03-09 11:30:31 +01:00
zah 8967f9cf01
Work-around the sizeof change in behavior introduced in Nim 1.6 (#3462) 2022-03-04 10:52:49 +02:00
tersec f0ada15dac
automated CL spec ref URL updates from v1.1.9 to v1.1.10 (#3455) 2022-03-02 10:00:21 +00:00
Tanguy 1bfbcc48b6
Bump libp2p (#3438) 2022-02-25 13:22:48 +01:00
tersec 5eecb9a21f
rename no{R=>r}eturn, no{I=>i}init, short{l=>L}og, E{T=>t}h2Node, Beacon{c=>C}hainDB (#3403) 2022-02-16 23:24:44 +01:00
Jacek Sieka c7abc97545
harden and speed up block sync (#3358)
* harden and speed up block sync

The `GetBlockBy*` server implementation currently reads SSZ bytes from
database, deserializes them into a Nim object then serializes them right
back to SSZ - here, we eliminate the deser/ser steps and send the bytes
straight to the network. Unfortunately, the snappy recoding must still
be done because of differences in framing.

Also, the quota system makes one giant request for quota right before
sending all blocks - this means that a 1024 block request will be
"paused" for a long time, then all blocks will be sent at once causing a
spike in database reads which potentially will see the reading client
time out before any block is sent.

Finally, on the reading side we make several copies of blocks as they
travel through various queues - this was not noticeable before but
becomes a problem in two cases: bellatrix blocks are up to 10mb (instead
of .. 30-40kb) and when backfilling, we process a lot more of them a lot
faster.

* fix status comparisons for nodes syncing from genesis (#3327 was a bit
too hard)
* don't hit database at all for post-altair slots in GetBlock v1
requests
2022-02-07 19:20:10 +02:00
Tanguy bcd7b4598c
Tune peering (#3348)
- Request metadata_v2 (altair) by default instead of the v1
- Change the metadata pinger to a 3 failure-then-kick, instead of being time based
- Update kicker scorer to take into account topics which we're not subscribed to, to be sure that we will be able to publish correctly
- Add some metrics to give "fanout" health (in the same spirit of mesh health)
2022-02-01 18:20:55 +01:00
tersec 29e2169585
phase 0 & altair beacon chain and altair validator spec URL updates (#3339) 2022-01-29 13:53:31 +00:00
tersec 89ffa8a1a7
spec URL & copyright year update (#3338) 2022-01-29 01:05:39 +00:00
Jacek Sieka f70aceef37
Harden handling of unviable forks (#3312)
* Harden handling of unviable forks

In our current handling of unviable forks, we allow peers to send us
blocks that come from a different fork - this is not necessarily an
error as it can happen naturally, but it does open up the client to a
case where the same unviable fork keeps getting requested - rather than
allowing this to happen, we'll now give these peers a small negative
score - if it keeps happening, we'll disconnect them.

* keep track of unviable forks in quarantine, to avoid filling it with
known junk
* collect peer scores in single module
* descore peers when they send unviable blocks during sync
* don't give score for duplicate blocks
* increase quarantine size to a level that allows finality to happen
under optimal conditions - this helps avoid downloading the same blocks
over and over in case of an unviable fork
* increase initial score for new peers to make room for one more failure
before disconnection
* log and score invalid/unviable blocks in requestmanager too
* avoid ChainDAG dependency in quarantine
* reject gossip blocks with unviable parent
* continue processing unviable sync blocks in order to build unviable
dag

* docs

* Update beacon_chain/consensus_object_pools/block_pools_types.nim

* add unviable queue test
2022-01-26 13:20:08 +01:00
tersec 2f635d3337
rename *_{MERGE => BELLATRIX} constant names (#3296) 2022-01-18 16:31:05 +00:00
Zahary Karadjov 47f1f7ff1a More efficient reward data persistance; Address review comments
The new format is based on compressed CSV files in two channels:

* Detailed per-epoch data
* Aggregated "daily" summaries

The use of append-only CSV file speeds up significantly the epoch
processing speed during data generation. The use of compression
results in smaller storage requirements overall. The use of the
aggregated files has a very minor cost in both CPU and storage,
but leads to near interactive speed for report generation.

Other changes:

- Implemented support for graceful shut downs to avoid corrupting
  the saved files.

- Fixed a memory leak caused by lacking `StateCache` clean up on each
  iteration.

- Addressed review comments

- Moved the rewards and penalties calculation code in a separate module

Required invasive changes to existing modules:

- The `data` field of the `KeyedBlockRef` type is made public to be used
  by the validator rewards monitor's Chain DAG update procedure.

- The `getForkedBlock` procedure from the `blockchain_dag.nim` module
  is made public to be used by the validator rewards monitor's Chain DAG
  update procedure.
2022-01-18 01:56:56 +02:00
tersec 14aab2c13f
update 10 modules from using merge to bellatrix (#3272) 2022-01-12 15:50:30 +01:00
Jacek Sieka 20e700fae4
Harden CommitteeIndex, SubnetId, SyncSubcommitteeIndex (#3259)
* Harden CommitteeIndex, SubnetId, SyncSubcommitteeIndex

Harden the use of `CommitteeIndex` et al to prevent future issues by
using a distinct type, then validating before use in several cases -
datatypes in spec are kept simple though so that invalid data still can
be read.

* fix invalid epoch used in REST
`/eth/v1/beacon/states/{state_id}/committees` committee length (could
return invalid data)
* normalize some variable names
* normalize committee index loops
* fix `RestAttesterDuty` to use `uint64` for `validator_committee_index`
* validate `CommitteeIndex` on ingress in REST API
* update rest rules with stricter parsing
* better REST serializers
* save lots of memory by not using `zip` ...at least a few bytes!
2022-01-09 01:28:49 +02:00
tersec 5878d34117
rename forkDigests.merge to forkDigests.bellatrix (#3245) 2022-01-05 14:24:15 +00:00
Tanguy 511f2d24f0
Tune getLowSubnets (#3241)
* Tune getLowSubnets

* Also aim for dHigh peers in gossipsub

* Apply suggestions from code review

Co-authored-by: Jacek Sieka <jacek@status.im>

Co-authored-by: Jacek Sieka <jacek@status.im>
2022-01-04 14:37:04 +01:00
tersec b81c06edab
rename Beacon{Block,State}Fork.Merge to Bellatrix; update copyright years (#3240) 2022-01-04 09:45:38 +00:00
tersec d20387e910
update copyright years and spec URLs (#3239) 2022-01-04 06:08:19 +00:00
tersec da017d2ca5
update from phase0/altair v1.1.6 URLs to v1.1.8 spec URLs (#3238) 2022-01-04 03:57:15 +00:00
tersec e78d12beb9
support GOSSIP_MAX_SIZE_MERGE blocks; prevent fork choice stutter via aggregate attestations (#3230)
* support GOSSIP_MAX_SIZE_MERGE-sized blocks; prevent fork choice clock stutter via aggregate attestations

* relay max gossip size to libp2p, use tight uncompressed bounds for fixed-size messages

* Update beacon_chain/networking/eth2_network.nim

Co-authored-by: Jacek Sieka <jacek@status.im>

* Update beacon_chain/networking/eth2_network.nim

Co-authored-by: Jacek Sieka <jacek@status.im>

Co-authored-by: Jacek Sieka <jacek@status.im>
2022-01-03 16:20:15 +00:00
Tanguy 4a72def1d5
Bump libp2p (#3207) 2021-12-17 12:39:24 +01:00
tersec cc51f3fd12
v1.1.{5 -> 6} phase 0 and altair spec URL updates (#3157) 2021-12-03 17:40:23 +00:00
tersec 9e395011d9
update 22 spec URLs to v1.1.5 (#3111) 2021-11-18 08:08:00 +00:00
tersec 2e868dc2ba
mass/mechanical update of 1.1.4 phase0 and altair spec URLs to 1.1.5 (#3067) 2021-11-09 07:40:41 +00:00
tersec 5c296c08b7
17 spec URL updates to v1.1.4 (#3060) 2021-11-08 10:30:52 +00:00
tersec eb3ad25859
mass/mechanical update of 1.1.3 phase/altair spec URLs to 1.1.4 (#3058) 2021-11-08 06:18:10 +00:00
Jacek Sieka a086cf01ac
altair fork handling cleanups (#3050)
* fix stack overflow crash in REST/debug/getStateV2
* introduce `ForkyXxx` for generic type matching of `Xxx` across
branches (SomeHashedBeaconState -> ForkyHashedBeaconState et al) -
`Some` is already used for other types of type classes
* consolidate function naming in BeaconChainDB, use some generics
* import `forks.nim` from other spec modules and move `Forked*` helpers
around to resolve circular imports
* remove `ForkedBeaconState`, use `ForkedHashedBeaconState` throughout
(less data shuffling between the types)
* fix several cases of states being stored on stack in tests, causing
random failures on some platforms
* remove reading json support from ncli - this should be ported to the
rest json reading instead (doesn't currently work because stack sizes)
2021-11-05 08:34:34 +01:00
Jacek Sieka d6cd1cd46c
Remove web3-mode, always keep web3 monitor enabled when given (#3042)
* Init some components fully before BeaconNode, per component dependency
graph
* remove `--web3-mode` option
* fixes https://github.com/status-im/nimbus-eth2/issues/2685
* reshuffle some beacon node init code
2021-11-01 15:50:24 +01:00
tersec 8307e9c601
mechanical non-merge v1.1.2 to v1.1.3 spec URL updates (#3030) 2021-10-26 16:44:23 +00:00
Jacek Sieka 421bf936ff
odds and ends (#3015)
* `allSyncCommittees` => `allSyncSubcommittees`
* simplify `_snappy` topic generation (avoid pointless string copies)
* simplify gossip id generator (avoid pointless string copies)
* avoid redundant syncnet ENR updates
* simplify topic validation (allow only validated topics)
2021-10-21 15:09:19 +02:00
nbc-bump-bot[bot] 29b26f3f6b
nim-libp2p auto bump (#2840)
* auto-bump nim-libp2p

* Remove peer info for other peers

Not definitive, just to test the libp2p's unstable branch

* finish up Remove peer info for other peers

* getKey -> getPublicKey

* bump libp2p

* libp2p bump

Co-authored-by: = <Menduist@users.noreply.github.com>
Co-authored-by: Tanguy <tanguy@status.im>
2021-10-21 13:01:29 +02:00
Jacek Sieka 9cf32c3748 clean up sync subcommittee handling
* `SyncCommitteeIndex` -> `SyncSubcommitteeIndex`
* `syncCommitteePeriod` -> `sync_committee_period` (spec spelling)
* tighten period comparisons
* fix assert when validating committee message with non-altair state in
REST api
2021-10-20 22:59:13 +03:00
Jacek Sieka bf6ad41d7d add drop and sync committee metrics
* use storeBlock for processing API blocks
* avoid double block dump
* count all gossip metrics at the same spot
* simplify block broadcast
2021-10-20 18:20:12 +03:00
Jacek Sieka c40cc6cec1 clean up fork enum and field names
* single naming strategy
* simplify some fork code
* simplify forked block production
2021-10-19 11:06:38 +03:00