- The current setting of 0.25 was very big. Set to 0.5, which is
potentially still large. This change did expose some issues with
the current implementation and especially testing.
- General clean-up, renaming for consistency, and
re-ordering/restructuring/deletion of some code.
- Fixed several typos
- ...
This would lead to sending an AcceptMessage with a zeroed out
connection id but still potentially bits set in the bitlist.
Requesting nodes could try to open up an uTP connection that
would never be accepted on the responder side.
- Adjust beacon lc db to avoid requirement of pruning optimistic
and finality updates
- Enable Portal config for beacon chain network to apply IP limits
configs on routing table
- Link network gossip validation to LC processor validation
- QuickFix put/get for optimistic and finality updates
- Minor fixes and clean-up
- Improve bridge gossip for new LC Updates
- Adjust local testnet script to be able to locally test this
- Adjust test and skip broken test
* Add clientInfo to ENR for easier testnet debugging
* Remove git rev from ENR client info
This allows for a shorter ENR which allows more ENRs to be packed
in the Nodes reply. And for glados, only the client name is used
anyhow.
* Correct the shortcut for ommershash verification post Shanghai
There was a faulty length check being done in the assumption that
the uncles field was already the list. However it is still the
RLP encoded data at that point, hence we check directly for the
RLP encoded value for empty list.
* Fix copy-paste error in withdrawal root verification
And print out the hashes in txs root and withdrawal root
verification
* Add discv5 provided ENR directly to Portal protocol routing table
Previous version of getting the ENR from the discv5 routing table
would not work due to the order of first calling the talk protocol
handler and only after that the addEnr to the disc5 routing table.
Instead of changing this order, pass along the ENR directly to
avoid this additional getNode call.
* Still request ENR from discv5 if it wasn't passed via handshake
* Nimbus folder environment update
details:
* Integrated `CoreDbRef` for the sources in the `nimbus` sub-folder.
* The `nimbus` program does not compile yet as it needs the updates
in the parallel `stateless` sub-folder.
* Stateless environment update
details:
* Integrated `CoreDbRef` for the sources in the `stateless` sub-folder.
* The `nimbus` program compiles now.
* Premix environment update
details:
* Integrated `CoreDbRef` for the sources in the `premix` sub-folder.
* Fluffy environment update
details:
* Integrated `CoreDbRef` for the sources in the `fluffy` sub-folder.
* Tools environment update
details:
* Integrated `CoreDbRef` for the sources in the `tools` sub-folder.
* Nodocker environment update
details:
* Integrated `CoreDbRef` for the sources in the
`hive_integration/nodocker` sub-folder.
* Tests environment update
details:
* Integrated `CoreDbRef` for the sources in the `tests` sub-folder.
* The unit tests compile and run cleanly now.
* Generalise `CoreDbRef` to any `select_backend` supported database
why:
Generalisation was just missed due to overcoming some compiler oddity
which was tied to rocksdb for testing.
* Suppress compiler warning for `newChainDB()`
why:
Warning was added to this function which must be wrapped so that
any `CatchableError` is re-raised as `Defect`.
* Split off persistent `CoreDbRef` constructor into separate file
why:
This allows to compile a memory only database version without linking
the backend library.
* Use memory `CoreDbRef` database by default
detail:
Persistent DB constructor needs to import `db/core_db/persistent
why:
Most tests use memory DB anyway. This avoids linking `-lrocksdb` or
any other backend by default.
* fix `toLegacyBackend()` availability check
why:
got garbled after memory/persistent split.
* Clarify raw access to MPT for snap sync handler
why:
Logically, `kvt` is not the raw access for the hexary trie (although
this holds for the legacy database)
* Launch Fluffy builds directly from make to avoid compile issue
Without this change, builds on latest macos fails when ulimit is
not set to 1024. But it will still cause libbacktrace error to occur
when launching the binaries so it would be still advised to
set it to 1024.
* Fix fluffy local testnet for some macOS systems
And some additional improvements to the script + run the fluffy
nodes at INFO log-level to speed-up the testing time.
* Split up fluffy tests in separate targets
This way the two test binaries can be build and ran
concurrently.
* Build Fluffy tools individually through Makefile
Before the builds were launched sequentually from a nimble task,
this would not allow for concurrent builds of the individual tools
* Some Makefile / nimble clean-up
* Improve logging and logging options in Fluffy
- Allow selection of log format, including:
- JSON
- automatic selection based on tty
- Allow log levels per topic configured on cli
- Remove failing on withdrawalsRoot to allow Shanghai BlockHeader.
Still need to add real checks in block header / body validation.
- Add withdrawals array to Block object for JSON-RPC API
Allow for the Fluffy Portal bridge to inject receipts. This
requires a web3 endpoint to be provided, and currently only
Alchemy is supported due to the used JSON-RPC endpoint.
It is only (mostly) a skeleton, not further developed and not
used. It is unlikely the way forward either when further
developing the Portal state network.
* Part of EIP-4895: add withdrawals processing to block processing.
* Refactoring: extracted the engine API handler bodies into procs.
Intending to implement the V2 versions next. (I need the bodies to be
in separate procs so that multiple versions can use them.)
* Working on Engine API changes for Shanghai.
* Updated nim-web3, resolved ambiguity in Hash256 type.
* Updated nim-eth3 to point to master, now that I've merged that.
* I'm confused about what's going on with engine_client.
But let's try resolving this Hash256 ambiguity.
* Still trying to fix this conflict with the Hash256 types.
* Does this work now that nimbus-eth2 has been updated?
* Corrected blockValue in getPayload responses back to UInt256.
c834f67a37
* Working on getting the withdrawals-related tests to pass.
* Fixing more of those Hash256 ambiguities.
(I'm not sure why the nim-web3 library introduced a conflicting type
named Hash256, but right now I just want to get this code to compile again.)
* Bumped a couple of libraries to fix some error messages.
* Needed to get "make fluffy-tools" to pass, too.
* Getting "make nimbus_verified_proxy" to build.
* Bump nimbus-eth2 and fix beacon LC related changes
* Disable local_testnet test in CI
Latest version is no longer compatible with the old nightlies that are being downloaded for the test
* Refactoring in preparation for time-based forking.
* Timestamp-based hard-fork-transition.
* Workaround SideEffect issue / compiler bug for both failing locations in Portal history code
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* Reduce Nim 1.6 compiler warnings/hints for Fluffy and Nimbus proxy
Mostly raises Defect removals, TaintedString removal and some
unnecessary imports.
Also updating the copyright years alongside.
* Further reduce Nim 1.6 compiler warnings/hints for Nimbus
* Updated to the latest nim-eth, nim-rocksdb, nim-web3
* Bump nimbus-eth2 module and fix related issues
Temporarily disabling Portal beacon light client network as it is
a lot of copy pasted code that did not yet take into account
forks. This will require a bigger rework and was not yet tested
in an actual network anyhow.
* More nimbus fixes after module bumps
---------
Co-authored-by: Adam Spitz <adamspitz@status.im>
Co-authored-by: jangko <jangko128@gmail.com>
Two unresolved items currently:
- Three tests that are temporarily disabled as they fail in the
macro_assembler code, which seems to be due to an ambigious
identifier Stop (Ops and chronos ServerCommand enum).
- i386 CI disabled as it fails at Nim compilation already. Failed
tests where already ignored for this target.
* Move BlockHeaderWithProof content to content key selector 0
- Remove as content type with content key selector 4
- Replace regular block header with BlockHeaderWithProof at
content key selector 0
* Apply blockHeader content key also to bridge
* Add tests for header with proof generation and verification
This is an example of how the beacon state historical_roots could
be added with a proof to be able to provide on the network and
verify by means of proof against the state root.
The portal_*Offer call was changed in the specs to actually do
gossip. Make it no longer possible to test purely an offer with
one node. Add OfferReal call for now until spec potentially gets
adjusted.
Also Add some Node information logging for FindContent and Offer
to be able to better debug failures and interoperability.
The `BlockHeader` structure in `nim-eth` was updated with support for
EIP-4844 (danksharding). To enable the `nim-eth` bump, the ingress of
`BlockHeader` structures has been hardened to reject headers that have
the new `excessDataGas` field until proper EIP4844 support exists.
https://github.com/status-im/nim-eth/pull/570
* Fix Portal Hive fails by correcting Portal history JSON RPC API
- Field naming in discv5_nodeInfo
- Call naming of portal_historyStore
- Other: some proc to func adjustements
- Switch from using Option to Opt which allows for smoother
usage with already existing Result types
- With all moved to Opt, make more use of valueOr to avoid
too many if else clause indentation and unstead have a more
clear error path at each step
- Remove dead code, char limits, style guide, etc.
- Replace getEncodedKeyForContent with ContentKey.init
and use ContentKey.init for each type
The `BlockHeader` structure in `nim-eth` was updated with support for
EIP-4895 (withdrawals). To enable the `nim-eth` bump, the ingress of
`BlockHeader` structures has been hardened to reject headers that have
the new `withdrawalsRoot` field until proper withdrawals support exists.
https://github.com/status-im/nim-eth/pull/562
* Add headers with proof content type and use it for verification
- Add BlockHeaderWithProof content type & content
- Use BlockHeaderWithProof content to verify if chain data is
part of the canonical chain
- Adjust parser & seeder code to be able to seed these headers
with proof
- Adjust eth_data_exporter to be able to export custom header
ranges for which to build proofs (mostly for testing)
There is currently quite some ugliness & clean-up needed for which
a big part is due tos upporting both BlockHeader and
BlockHeaderWithProof on the network.
* Change accumulator proof to array / SSZ vector type
- Change accumulator proof to SSZ vector instead of SSZ list.
- Add and use general buildProof and buildHeaderWithProof func.
* Make the BlockHeaderWithProof an SSZ Union with None option
* Update portal-spec-tests to master commit
- Can write epoch accumulators to files now with eth_data_exporter
- RPC requests to gossip epoch accumulators now uses these files
instead of building on the fly
- Other build accumulator calls are adjusted and only used for
tests and thus moved to testing folder
For accumulator building we now use intermediary header epoch
files which renders the use of a temporary db for this no longer
needed. Code was already no longer in use.
Portal master accumulator was removed from the network specs as a
content type shared on the network, as since the merge this is
a finite accumulator (pre-merge only).
So in this PR the accumulator gets removed as network type and
gets instead baked into the library. Building it is done by
seperate tooling (eth_data_exporter).
Because of this a lot of extra code can be removed that was
located in history_network, content_db, portal_protocol, etc.
Also removed to option to build the accumulator at start-up
of fluffy as this takes several minutes making it not viable.
It can still be loaded from a provided file however.
The ssz accumulator file is for now stored in the recently
created portal-spec-tests repository.
- Add exportHeaders to write headers in e2s file per epoch
- Add verifyHeaders to verify decoding the above files
- Adjust exportAccumulatorData to use generated header epoch files
and write accumulator in SSZ (no hex)
- Add printAccumulatorData to print all root hashes
- Let accumulator finish its last pre merge epoch (hash_tree_root
on incomplete epoch).
- Adjust code to use isPreMerge and remove isCurrentEpoch
- Split up tests to a set that runs with a mainnet merge block
number and a set that runs with a testing value.
Also requires us to split header data propagation from block body
and receipts propagation as the now fixed bug would allow for more
data to be gossiped even when data does not get validated (which
requires the headers).
* Fix bug in inCurrentEpoch and improve accumulator related tests
- Fix negative wraparound / underflow in inCurrentEpoch
- Add tests in accumulator tests to verify the above
- Add header offer tests with accumulator that does and doesn't
contain historical epochs
- Additional clean-up of history tests
- enable canonicalVerify in the tests
* Testnet improvements
Increase timeout for reading
Add more logs
Offer endpoint can fail due to talkReq timeout, to avoid
test failure, retry it few times until success.
- Add retries when the network request failed on validation of
block header, body or receipts.
- Shuffle the first set of neighbours that the request is send to
in order to not always hit the same peer first for the same content
- Some general clean-up
- Move the accumulator definitions to a history accumulator file
- Add accumulator build helper calls + temporary database
- Add a header gossip content key encoding test
- Refactor & some cleanup
- More consistent naming in calls used by the JSON-RPC debug API
- Use storeContent everywhere to make sure content is only stored
if in range
- Remove populateHistoryDb subcommand and replace by JSON-RPC call
storeContent
- Remove some whitespace and fix some indentations
Allow also concurrent neighborhood gossip jobs when seeding data
into the network.
Update Grafana dashboard for two additional metrics regarding
lookups in neighborhood gossip.
Kim De Mey
Daniel Sobol
Jakub Sokołowski
andri lim
Jordan Hrycaj
Adam Spitz
KonradStaniec
Etan Kissling
Jacek Sieka