* Launch Fluffy builds directly from make to avoid compile issue
Without this change, builds on latest macos fails when ulimit is
not set to 1024. But it will still cause libbacktrace error to occur
when launching the binaries so it would be still advised to
set it to 1024.
* Fix fluffy local testnet for some macOS systems
And some additional improvements to the script + run the fluffy
nodes at INFO log-level to speed-up the testing time.
* Split up fluffy tests in separate targets
This way the two test binaries can be build and ran
concurrently.
* Build Fluffy tools individually through Makefile
Before the builds were launched sequentually from a nimble task,
this would not allow for concurrent builds of the individual tools
* Some Makefile / nimble clean-up
* Improve logging and logging options in Fluffy
- Allow selection of log format, including:
- JSON
- automatic selection based on tty
- Allow log levels per topic configured on cli
- Remove failing on withdrawalsRoot to allow Shanghai BlockHeader.
Still need to add real checks in block header / body validation.
- Add withdrawals array to Block object for JSON-RPC API
Allow for the Fluffy Portal bridge to inject receipts. This
requires a web3 endpoint to be provided, and currently only
Alchemy is supported due to the used JSON-RPC endpoint.
It is only (mostly) a skeleton, not further developed and not
used. It is unlikely the way forward either when further
developing the Portal state network.
* Part of EIP-4895: add withdrawals processing to block processing.
* Refactoring: extracted the engine API handler bodies into procs.
Intending to implement the V2 versions next. (I need the bodies to be
in separate procs so that multiple versions can use them.)
* Working on Engine API changes for Shanghai.
* Updated nim-web3, resolved ambiguity in Hash256 type.
* Updated nim-eth3 to point to master, now that I've merged that.
* I'm confused about what's going on with engine_client.
But let's try resolving this Hash256 ambiguity.
* Still trying to fix this conflict with the Hash256 types.
* Does this work now that nimbus-eth2 has been updated?
* Corrected blockValue in getPayload responses back to UInt256.
c834f67a37
* Working on getting the withdrawals-related tests to pass.
* Fixing more of those Hash256 ambiguities.
(I'm not sure why the nim-web3 library introduced a conflicting type
named Hash256, but right now I just want to get this code to compile again.)
* Bumped a couple of libraries to fix some error messages.
* Needed to get "make fluffy-tools" to pass, too.
* Getting "make nimbus_verified_proxy" to build.
* Bump nimbus-eth2 and fix beacon LC related changes
* Disable local_testnet test in CI
Latest version is no longer compatible with the old nightlies that are being downloaded for the test
* Refactoring in preparation for time-based forking.
* Timestamp-based hard-fork-transition.
* Workaround SideEffect issue / compiler bug for both failing locations in Portal history code
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
* Reduce Nim 1.6 compiler warnings/hints for Fluffy and Nimbus proxy
Mostly raises Defect removals, TaintedString removal and some
unnecessary imports.
Also updating the copyright years alongside.
* Further reduce Nim 1.6 compiler warnings/hints for Nimbus
* Updated to the latest nim-eth, nim-rocksdb, nim-web3
* Bump nimbus-eth2 module and fix related issues
Temporarily disabling Portal beacon light client network as it is
a lot of copy pasted code that did not yet take into account
forks. This will require a bigger rework and was not yet tested
in an actual network anyhow.
* More nimbus fixes after module bumps
---------
Co-authored-by: Adam Spitz <adamspitz@status.im>
Co-authored-by: jangko <jangko128@gmail.com>
Two unresolved items currently:
- Three tests that are temporarily disabled as they fail in the
macro_assembler code, which seems to be due to an ambigious
identifier Stop (Ops and chronos ServerCommand enum).
- i386 CI disabled as it fails at Nim compilation already. Failed
tests where already ignored for this target.
* Move BlockHeaderWithProof content to content key selector 0
- Remove as content type with content key selector 4
- Replace regular block header with BlockHeaderWithProof at
content key selector 0
* Apply blockHeader content key also to bridge
* Add tests for header with proof generation and verification
This is an example of how the beacon state historical_roots could
be added with a proof to be able to provide on the network and
verify by means of proof against the state root.
The portal_*Offer call was changed in the specs to actually do
gossip. Make it no longer possible to test purely an offer with
one node. Add OfferReal call for now until spec potentially gets
adjusted.
Also Add some Node information logging for FindContent and Offer
to be able to better debug failures and interoperability.
The `BlockHeader` structure in `nim-eth` was updated with support for
EIP-4844 (danksharding). To enable the `nim-eth` bump, the ingress of
`BlockHeader` structures has been hardened to reject headers that have
the new `excessDataGas` field until proper EIP4844 support exists.
https://github.com/status-im/nim-eth/pull/570
* Fix Portal Hive fails by correcting Portal history JSON RPC API
- Field naming in discv5_nodeInfo
- Call naming of portal_historyStore
- Other: some proc to func adjustements
- Switch from using Option to Opt which allows for smoother
usage with already existing Result types
- With all moved to Opt, make more use of valueOr to avoid
too many if else clause indentation and unstead have a more
clear error path at each step
- Remove dead code, char limits, style guide, etc.
- Replace getEncodedKeyForContent with ContentKey.init
and use ContentKey.init for each type
The `BlockHeader` structure in `nim-eth` was updated with support for
EIP-4895 (withdrawals). To enable the `nim-eth` bump, the ingress of
`BlockHeader` structures has been hardened to reject headers that have
the new `withdrawalsRoot` field until proper withdrawals support exists.
https://github.com/status-im/nim-eth/pull/562
* Add headers with proof content type and use it for verification
- Add BlockHeaderWithProof content type & content
- Use BlockHeaderWithProof content to verify if chain data is
part of the canonical chain
- Adjust parser & seeder code to be able to seed these headers
with proof
- Adjust eth_data_exporter to be able to export custom header
ranges for which to build proofs (mostly for testing)
There is currently quite some ugliness & clean-up needed for which
a big part is due tos upporting both BlockHeader and
BlockHeaderWithProof on the network.
* Change accumulator proof to array / SSZ vector type
- Change accumulator proof to SSZ vector instead of SSZ list.
- Add and use general buildProof and buildHeaderWithProof func.
* Make the BlockHeaderWithProof an SSZ Union with None option
* Update portal-spec-tests to master commit
- Can write epoch accumulators to files now with eth_data_exporter
- RPC requests to gossip epoch accumulators now uses these files
instead of building on the fly
- Other build accumulator calls are adjusted and only used for
tests and thus moved to testing folder
For accumulator building we now use intermediary header epoch
files which renders the use of a temporary db for this no longer
needed. Code was already no longer in use.
Portal master accumulator was removed from the network specs as a
content type shared on the network, as since the merge this is
a finite accumulator (pre-merge only).
So in this PR the accumulator gets removed as network type and
gets instead baked into the library. Building it is done by
seperate tooling (eth_data_exporter).
Because of this a lot of extra code can be removed that was
located in history_network, content_db, portal_protocol, etc.
Also removed to option to build the accumulator at start-up
of fluffy as this takes several minutes making it not viable.
It can still be loaded from a provided file however.
The ssz accumulator file is for now stored in the recently
created portal-spec-tests repository.
- Add exportHeaders to write headers in e2s file per epoch
- Add verifyHeaders to verify decoding the above files
- Adjust exportAccumulatorData to use generated header epoch files
and write accumulator in SSZ (no hex)
- Add printAccumulatorData to print all root hashes
- Let accumulator finish its last pre merge epoch (hash_tree_root
on incomplete epoch).
- Adjust code to use isPreMerge and remove isCurrentEpoch
- Split up tests to a set that runs with a mainnet merge block
number and a set that runs with a testing value.
Also requires us to split header data propagation from block body
and receipts propagation as the now fixed bug would allow for more
data to be gossiped even when data does not get validated (which
requires the headers).
* Fix bug in inCurrentEpoch and improve accumulator related tests
- Fix negative wraparound / underflow in inCurrentEpoch
- Add tests in accumulator tests to verify the above
- Add header offer tests with accumulator that does and doesn't
contain historical epochs
- Additional clean-up of history tests
- enable canonicalVerify in the tests
* Testnet improvements
Increase timeout for reading
Add more logs
Offer endpoint can fail due to talkReq timeout, to avoid
test failure, retry it few times until success.
- Add retries when the network request failed on validation of
block header, body or receipts.
- Shuffle the first set of neighbours that the request is send to
in order to not always hit the same peer first for the same content
- Some general clean-up
- Move the accumulator definitions to a history accumulator file
- Add accumulator build helper calls + temporary database
- Add a header gossip content key encoding test
- Refactor & some cleanup
- More consistent naming in calls used by the JSON-RPC debug API
- Use storeContent everywhere to make sure content is only stored
if in range
- Remove populateHistoryDb subcommand and replace by JSON-RPC call
storeContent
- Remove some whitespace and fix some indentations
Allow also concurrent neighborhood gossip jobs when seeding data
into the network.
Update Grafana dashboard for two additional metrics regarding
lookups in neighborhood gossip.
* Improvements to the propagation and seeding of data
- Use a lookup for nodes selection in neighborhoodGossip
- Rework populate db code and add `propagateBlockHistoryDb` call
and portal_history__propagateBlock json-rpc call
- Small adjustment to blockwalk
* Avoid storing out-of-range data in the propagate db calls
Currently re-using http connections for the json-rpc requests
seems to slow down the requests considerably. Avoid this by
forcing a close after each requests in the blockwalk tool.
* Add concurrency to the content offers of neighborhoodGossip proc
And remove some whitespace
* Remove more whitespace and adjust for 80 char line limit
* Update fluffy grafana dashboard to include gossip offer results
* Remove unused import of config to avoid select_backend db import
- Importing nimbus-eth1 config.nim causes import of select_backend
which will default cause an import of kvstore_rocksdb and thus a
require rocksdb. Remove unused one to avoid rocksdb dependency
for Fluffy.
- Remove some whitespace in bridge_client (to make fluffy CI
trigger for sure).
* Use specific cache keys for fluffy CI workflow
* Disable Fluffy CI reproducibility test
- Truncate returned number of ENRs in Portal Nodes message to fit
the discv5 max. packet size
- Truncate returned number of ENRs in Portal Content message to
fit the discv5 max. packet size
- Use more detailed packet size calculation for max content payload
in Portal Content message.
- Add metrics to track how many ENRs get packed in the Portal
Nodes and Content messages.
* Add block bodies to the propagation and lookups
- Read and propagate block bodies next to the headers
- Add block bodies content (via lookups) to the eth_getBlockByHash
call
- Test the above in test_portal_testnet
* Fix storage/propagation of block bodies
- Data format is an actual block: [header, txs, uncles], which
requires some adjustment to store the block body
- Added also `eth_getBlockTransactionCountByHash` json rpc call
Default the network key will be taken from a network key file
instead of randomly generated on each run. This is done because
the data that gets stored in the content database is dependant on
the network key used, as the node id is derived from this.
This is to avoid having a json rpc call fail if there was a
previous call done more than 10 seconds ago. 10 seconds because
that is the default timeout on the http server side.
* Sharing block header data around in a Portal history network (PoC)
- Rework PortalStream to have an instance per PortalProtocol (this
needs to be improved eventually). Each instance uses the same
UtpDiscv5Protocol instance.
- Add processContent on receival of accepted data
- Add dumb neighborhoodGossip: dumb in the sense that it only
offers one piece of content at a time.
- Add to / adjust populate_db to also allow for propagation of
the data and add debug rpc call: portal_history_propagate
- Add eth_rpc_client
- Add eth_getBlockbyHash (no txs or uncles) to eth API
- Add additional test to test_portal_testnet which loads 5 block
headers to 1 node, and offers this data to few nodes, which should
propagate it over the network further. Next query every node for
this data.
* Adjust paths on which Fluffy CI is triggered
* Add documentation on the local testnet
* Improve the tests of the local testnet
The local testnet test was rather flaky and would occasionally
fail. It has been made more robust by adding the ENRs directly
to the routing table instead of doing some random lookups.
Additionally, the amount of nodes were increased (=64), ip limits
configuration was added, and the bits-per-hop value was set to 1
in order to make the lookups more likely to hit the network
instead of only the local routing table.
Failure is obviously still possible to happen when sufficient
packets get lost. If this turns out to be the case with the current
amount of nodes, we might have to revise the testing strategy here.
* Disable lookup test for State network
Disable lookup test for State network due to issue with custom
distance function causing the lookup to not always converging
towards the target.
- Allow access to contentDB from portal wire protocol
- Use this to do the db.get in `handleFindContent` directly
- Use this to check the `contentKeys` list in `handleOffer`
* Change History content key to us SSZ Union and adjust tests
* Change slot to byteBE instead of LE
This is currently not specified in the Portal network
specifications, but we are using already BE for the actual content
key, so change it also here to remain consistent.
- Add portal network ping and findNodes JSON-RPC endpoints
- clean-up of some cli arguments
- Add protocol_interop.md document and adjust/fix other
documentation
Currently bootstrap nodes for discv5 and for the Portal nodes
were provided through separate cli arguments. This is however
confusing and cumbersome as typically when (currently) testing
a node will have both discv5 and the Portal networks enabled.
We merge them into one argument.
If a node happens not to support a Portal network, it will be
removed after message request failure.
Commit also contains additional clean-up and nim-eth bump.
* Rename FindNode to FindNodes as per spec
* Use consistently lower case starting camelCase for consts
Style guide nep1 allows for both CamelCase and camelCase for
consts, but we seem to use more often camelCase. Using this now
consistently.
* Change some procs to func
* Add resolve call for Portal networks
And:
- Refactor some code by adding a findNodeVerified call
- add the portal network lookup json-rpc call that uses resolve
- add usage of this lookup in the portal testnet tests
- Additional comments
* Let recordsFromBytes fail on invalid ENRs
This behaviour is more similar as how it is done in discovery v5
base layer.
- Add basic discv5 and portal json-rpc calls and activate them in
fluffy
- Renames in the rpc folder
- Add local testnet script and run this script in CI
- bump nim-eth
* Add SSZ Unions through case objects
* Add connection id content response test and improve other test vectors
* Implement content keys and ids for state network as per spec
Content keys case object is used so that it can be serialized and
deserialized as an SSZ Union.
* Let message Union in Portal wire protocol start at 0 as per new spec
- Search for the node on an incoming portal message and try to add
it to the routing table
- Don't rely on discv5 nodes for bootstrapping portal networks for
now.
- Attempt to repopulate the routing table when it is at 0 or drops
to 0.
* Add a basic ContentDB for Portal networks
* Use ContentDB in StateNetwork
* Avoid probably some form of sandwich problem by re-exporting kvstore_sqlite3 from content_db
* Allow for passing Portal specific bootstrap nodes
* Fix to also replaceNode when decodeMessage fails
* Add portal bootstrap node tests and reorder test cases
The Portal Network tests fail with the custom functions,
on one part due to the fact that the portal tests still
uses the xor functions, but also because the
`neighboursAtDistances` call appears to filter them out.
The reverse calculation might be off.
* Generalize netork layer for portal
* Make messages free from any content references
* Use portal network in main fluffy module
* Fix cli
* Use lookup in portal network
* Avoid using result
* Update readme with adjusted intro and dev updates link
* Remove pcre from prerequisites as it no longer is
* Change to hackmd doc as status notes seem not accessible
Kim De Mey
jangko
Adam Spitz
KonradStaniec
Etan Kissling
Jacek Sieka