26 KiB

Raw Blame History

Ethereum 2.0 Altair -- Honest Validator

This is an accompanying document to Ethereum 2.0 Altair -- The Beacon Chain, which describes the expected actions of a "validator" participating in the Ethereum 2.0 protocol.

Introduction
Prerequisites
Warning
Constants
- Misc
Containers
Validator assignments
- Sync Committee
- Lookahead
Beacon chain responsibilities
Sync committee subnet stability

Introduction

This document represents the expected behavior of an "honest validator" with respect to the Altair upgrade of the Ethereum 2.0 protocol. It builds on the previous document for the behavior of an "honest validator" from Phase 0 of the Ethereum 2.0 protocol. This previous document is referred to below as the "Phase 0 document".

Altair introduces a new type of committee: the sync committee. Sync committees are responsible for signing each block of the canonical chain and there exists an efficient algorithm for light clients to sync the chain using the output of the sync committees. See the sync protocol for further details on the light client sync. Under this network upgrade, validators track their participation in this new committee type and produce the relevant signatures as required. Block proposers incorporate the (aggregated) sync committee signatures into each block they produce.

Prerequisites

All terminology, constants, functions, and protocol mechanics defined in the Altair -- The Beacon Chain doc are requisite for this document and used throughout. Please see this document before continuing and use as a reference throughout.

Warning

This document is currently illustrative for early Altair testnets and some parts are subject to change, especially pending implementation and profiling of Altair testnets.

Constants

Misc

Name	Value	Unit
`TARGET_AGGREGATORS_PER_SYNC_SUBCOMMITTEE`	`2**2` (= 4)	validators
`SYNC_COMMITTEE_SUBNET_COUNT`	`4`	The number of sync committee subnets used in the gossipsub aggregation protocol.

Containers

`SyncCommitteeSignature`

class SyncCommitteeSignature(Container):
    # Slot to which this contribution pertains
    slot: Slot
    # Block root for this signature
    beacon_block_root: Root
    # Index of the validator that produced this signature
    validator_index: ValidatorIndex
    # Signature by the validator over the block root of `slot`
    signature: BLSSignature

`SyncCommitteeContribution`

class SyncCommitteeContribution(Container):
    # Slot to which this contribution pertains
    slot: Slot
    # Block root for this contribution
    beacon_block_root: Root
    # The subcommittee this contribution pertains to out of the broader sync committee
    subcommittee_index: uint64
    # A bit is set if a signature from the validator at the corresponding
    # index in the subcommittee is present in the aggregate `signature`.
    aggregation_bits: Bitvector[SYNC_COMMITTEE_SIZE // SYNC_COMMITTEE_SUBNET_COUNT]
    # Signature by the validator(s) over the block root of `slot`
    signature: BLSSignature

`ContributionAndProof`

class ContributionAndProof(Container):
    aggregator_index: ValidatorIndex
    contribution: SyncCommitteeContribution
    selection_proof: BLSSignature

`SignedContributionAndProof`

class SignedContributionAndProof(Container):
    message: ContributionAndProof
    signature: BLSSignature

`SyncAggregatorSelectionData`

class SyncAggregatorSelectionData(Container):
    slot: Slot
    subcommittee_index: uint64

Validator assignments

A validator determines beacon committee assignments and beacon block proposal duties as defined in the Phase 0 document.

Sync Committee

To determine sync committee assignments, a validator can run the following function: is_assigned_to_sync_committee(state, epoch, validator_index) where epoch is an epoch number within the current or next sync committee period. This function is a predicate indicating the presence or absence of the validator in the corresponding sync committee for the queried sync committee period.

Note: Being assigned to a sync committee for a given slot means that the validator produces and broadcasts signatures for slot - 1 for inclusion in slot. This means that when assigned to an epoch sync committee signatures must be produced and broadcast for slots on range [compute_start_slot_at_epoch(epoch) - 1, compute_start_slot_at_epoch(epoch) + SLOTS_PER_EPOCH - 1) rather than for the range [compute_start_slot_at_epoch(epoch), compute_start_slot_at_epoch(epoch) + SLOTS_PER_EPOCH). To reduce complexity during the Altair fork, sync committees are not expected to produce signatures for compute_epoch_at_slot(ALTAIR_FORK_EPOCH) - 1.

def compute_sync_committee_period(epoch: Epoch) -> uint64:
    return epoch // EPOCHS_PER_SYNC_COMMITTEE_PERIOD

def is_assigned_to_sync_committee(state: BeaconState,
                                  epoch: Epoch,
                                  validator_index: ValidatorIndex) -> bool:
    sync_committee_period = compute_sync_committee_period(epoch)
    current_epoch = get_current_epoch(state)
    current_sync_committee_period = compute_sync_committee_period(current_epoch)
    next_sync_committee_period = current_sync_committee_period + 1
    assert sync_committee_period in (current_sync_committee_period, next_sync_committee_period)

    pubkey = state.validators[validator_index].pubkey
    if sync_committee_period == current_sync_committee_period:
        return pubkey in state.current_sync_committee.pubkeys
    else:  # sync_committee_period == next_sync_committee_period
        return pubkey in state.next_sync_committee.pubkeys

Lookahead

The sync committee shufflings give validators 1 sync committee period of lookahead which amounts to EPOCHS_PER_SYNC_COMMITTEE_PERIOD epochs. At any given epoch, the BeaconState contains the current SyncCommittee and the next SyncCommittee. Once every EPOCHS_PER_SYNC_COMMITTEE_PERIOD epochs, the next SyncCommittee becomes the current SyncCommittee and the next committee is computed and stored.

Note: The data required to compute a given committee is not cached in the BeaconState after committees are calculated at the period boundaries. This means that calling get_sync_commitee() in a given epoch can return a different result than what was computed during the relevant epoch transition. For this reason, always get committee assignments via the fields of the BeaconState (current_sync_committee and next_sync_committee) or use the above reference code.

A validator should plan for future sync committee assignments by noting which sync committee periods they are selected for participation. Specifically, a validator should:

Upon (re)syncing the chain and upon sync committee period boundaries, check for assignments in the current and next sync committee periods.
If the validator is in the current sync committee period, then they perform the responsibilities below for sync committee rewards.
If the validator is in the next sync committee period, they should wait until the next EPOCHS_PER_SYNC_COMMITTEE_PERIOD boundary and then perform the responsibilities throughout that period.

Beacon chain responsibilities

A validator maintains the responsibilities given in the Phase 0 document.

Block proposals are modified to incorporate the sync committee signatures as detailed below.

When assigned to a sync committee, validators have a new responsibility to sign and broadcast beacon block roots during each slot of the sync committee period. These signatures are aggregated and routed to the proposer over gossip for inclusion into a beacon block. Assignments to a particular sync committee are infrequent at normal validator counts; however, an action every slot is required when in the current active sync committee.

Block proposal

Refer to the phase 0 document for the majority of the block proposal responsibility. The validator should follow those instructions to prepare a SignedBeaconBlock for inclusion into the chain. All changes are additive to phase 0 and noted below.

Preparing a `BeaconBlock`

No change to Preparing for a BeaconBlock.

Constructing the `BeaconBlockBody`

Each section of Constructing the BeaconBlockBody should be followed. After constructing the BeaconBlockBody as per that section, the proposer has an additional task to include the sync committee signatures:

Sync committee

The proposer receives a number of SyncCommitteeContributions (wrapped in SignedContributionAndProofs on the wire) from validators in the sync committee who are selected to partially aggregate signatures from independent subcommittees formed by breaking the full sync committee into SYNC_COMMITTEE_SUBNET_COUNT pieces (see below for details).

The proposer collects the contributions that match their local view of the chain (i.e. contribution.beacon_block_root == block.parent_root) for further aggregation when preparing a block. Of these contributions, proposers should select the best contribution seen across all aggregators for each subnet/subcommittee. A contribution with more valid signatures is better than a contribution with fewer signatures.

Recall block.body.sync_aggregate.sync_committee_bits is a Bitvector where the ith bit is True if the corresponding validator in the sync committee has produced a valid signature, and that block.body.sync_aggregate.sync_committee_signature is the aggregate BLS signature combining all of the valid signatures.

Given a collection of the best seen contributions (with no repeating subcommittee_index values) and the BeaconBlock under construction, the proposer processes them as follows:

def process_sync_committee_contributions(block: BeaconBlock,
                                         contributions: Set[SyncCommitteeContribution]) -> None:
    sync_aggregate = SyncAggregate()
    signatures = []

    for contribution in contributions:
        subcommittee_index = contribution.subcommittee_index
        for index, participated in enumerate(contribution.aggregation_bits):
            if participated:
                sync_subcommittee_size = SYNC_COMMITTEE_SIZE // SYNC_COMMITTEE_SUBNET_COUNT
                participant_index = sync_subcommittee_size * subcommittee_index + index
                sync_aggregate.sync_committee_bits[participant_index] = True
        signatures.append(contribution.signature)

    sync_aggregate.sync_committee_signature = bls.Aggregate(signatures)

    block.body.sync_aggregate = sync_aggregate

Note: The resulting block must pass the validations for the SyncAggregate defined in process_sync_committee defined in the state transition document. In particular, this means SyncCommitteeContributions received from gossip must have a beacon_block_root that matches the proposer's local view of the chain.

Packaging into a `SignedBeaconBlock`

No change to Packaging into a SignedBeaconBlock.

Attesting and attestation aggregation

Refer to the phase 0 document for the attesting and attestation aggregation responsibilities. There is no change compared to the phase 0 document.

Sync committees

Sync committee members employ an aggregation scheme to reduce load on the global proposer channel that is monitored by all potential proposers to be able to include the full output of the sync committee every slot. Sync committee members produce individual signatures on subnets (similar to the attestation subnets) via SyncCommitteeSignatures which are then collected by aggregators sampled from the sync subcommittees to produce a SyncCommitteeContribution which is gossiped to proposers. This process occurs each slot.

Sync committee signatures

Prepare sync committee signature

If a validator is in the current sync committee (i.e. is_assigned_to_sync_committee() above returns True), then for every slot in the current sync committee period, the validator should prepare a SyncCommitteeSignature for the previous slot (slot - 1) according to the logic in get_sync_committee_signature as soon as they have determined the head block of slot - 1.

This logic is triggered upon the same conditions as when producing an attestation. Meaning, a sync committee member should produce and broadcast a SyncCommitteeSignature either when (a) the validator has received a valid block from the expected block proposer for the current slot or (b) one-third of the slot has transpired (SECONDS_PER_SLOT / 3 seconds after the start of the slot) -- whichever comes first.

get_sync_committee_signature() assumes state is the head state corresponding to processing the block up to the current slot as determined by the fork choice (including any empty slots up to the current slot processed with process_slots on top of the latest block), block_root is the root of the head block, validator_index is the index of the validator in the registry state.validators controlled by privkey, and privkey is the BLS private key for the validator.

def get_sync_committee_signature(state: BeaconState,
                                 block_root: Root,
                                 validator_index: ValidatorIndex,
                                 privkey: int) -> SyncCommitteeSignature:
    epoch = get_current_epoch(state)
    domain = get_domain(state, DOMAIN_SYNC_COMMITTEE, epoch)
    signing_root = compute_signing_root(block_root, domain)
    signature = bls.Sign(privkey, signing_root)

    return SyncCommitteeSignature(slot=state.slot, validator_index=validator_index, signature=signature)

Broadcast sync committee signature

The validator broadcasts the assembled signature to the assigned subnet, the sync_committee_{subnet_id} pubsub topic.

The subnet_id is derived from the position in the sync committee such that the sync committee is divided into "subcommittees". subnet_id can be computed via compute_subnets_for_sync_committee() where state is a BeaconState during the matching sync committee period.

Note: This function returns multiple subnets if a given validator index is included multiple times in a given sync committee across multiple subcommittees.

def compute_subnets_for_sync_committee(state: BeaconState, validator_index: ValidatorIndex) -> Sequence[uint64]:
    next_slot_epoch = compute_epoch_at_slot(Slot(state.slot + 1))
    if compute_sync_committee_period(get_current_epoch(state)) == compute_sync_committee_period(next_slot_epoch):
        sync_committee = state.current_sync_committee
    else:
        sync_committee = state.next_sync_committee

    target_pubkey = state.validators[validator_index].pubkey
    sync_committee_indices = [index for index, pubkey in enumerate(sync_committee.pubkeys) if pubkey == target_pubkey]
    return [
        uint64(index // (SYNC_COMMITTEE_SIZE // SYNC_COMMITTEE_SUBNET_COUNT))
        for index in sync_committee_indices
    ]

Note: Subnet assignment does not change during the duration of a validator's assignment to a given sync committee.

Note: If a validator has multiple subnet_id results from compute_subnets_for_sync_committee, the validator should broadcast a copy of the sync_committee_signature on each of the distinct subnets.

Sync committee contributions

Each slot, some sync committee members in each subcommittee are selected to aggregate the SyncCommitteeSignatures into a SyncCommitteeContribution which is broadcast on a global channel for inclusion into the next block.

Aggregation selection

A validator is selected to aggregate based on the value returned by is_sync_committee_aggregator() where signature is the BLS signature returned by get_sync_committee_selection_proof(). The signature function takes a BeaconState with the relevant sync committees for the queried slot (i.e. state.slot is within the span covered by the current or next sync committee period), the subcommittee_index equal to the subnet_id, and the privkey is the BLS private key associated with the validator.

def get_sync_committee_selection_proof(state: BeaconState,
                                       slot: Slot,
                                       subcommittee_index: uint64,
                                       privkey: int) -> BLSSignature:
    domain = get_domain(state, DOMAIN_SYNC_COMMITTEE_SELECTION_PROOF, compute_epoch_at_slot(slot))
    signing_data = SyncAggregatorSelectionData(
        slot=slot,
        subcommittee_index=subcommittee_index,
    )
    signing_root = compute_signing_root(signing_data, domain)
    return bls.Sign(privkey, signing_root)

def is_sync_committee_aggregator(signature: BLSSignature) -> bool:
    modulo = max(1, SYNC_COMMITTEE_SIZE // SYNC_COMMITTEE_SUBNET_COUNT // TARGET_AGGREGATORS_PER_SYNC_SUBCOMMITTEE)
    return bytes_to_uint64(hash(signature)[0:8]) % modulo == 0

NOTE: The set of aggregators generally changes every slot; however, the assignments can be computed ahead of time as soon as the committee is known.

Construct sync committee contribution

If a validator is selected to aggregate the SyncCommitteeSignatures produced on a subnet during a given slot, they construct an aggregated SyncCommitteeContribution.

Given all of the (valid) collected sync_committee_signatures: Set[SyncCommitteeSignature] from the sync_committee_{subnet_id} gossip during the selected slot with an equivalent beacon_block_root to that of the aggregator, the aggregator creates a contribution: SyncCommitteeContribution with the following fields:

Slot

Set contribution.slot = state.slot where state is the BeaconState for the slot in question.

Beacon block root

Set contribution.beacon_block_root = beacon_block_root from the beacon_block_root found in the sync_committee_signatures.

Subcommittee index

Set contribution.subcommittee_index to the index for the subcommittee index corresponding to the subcommittee assigned to this subnet. This index matches the subnet_id used to derive the topic name.

Aggregation bits

Let contribution.aggregation_bits be a Bitvector[SYNC_COMMITTEE_SIZE // SYNC_COMMITTEE_SUBNET_COUNT], where the indexth bit is set in the Bitvector for each corresponding validator included in this aggregate from the corresponding subcommittee. An aggregator finds the index in the sync committee (as returned by get_sync_committee_indices()) for a given validator referenced by sync_committee_signature.validator_index and maps the sync committee index to an index in the subcommittee (along with the prior subcommittee_index). This index within the subcommittee is set in contribution.aggegration_bits.

For example, if a validator with index 2044 is pseudo-randomly sampled to sync committee index 135. This sync committee index maps to subcommittee_index 1 with position 7 in the Bitvector for the contribution.

Note: A validator could be included multiple times in a given subcommittee such that multiple bits are set for a single SyncCommitteeSignature.

Signature

Set contribution.signature = aggregate_signature where aggregate_signature is obtained by assembling the appropriate collection of BLSSignatures from the set of sync_committee_signatures and using the bls.Aggregate() function to produce an aggregate BLSSignature.

The collection of input signatures should include one signature per validator who had a bit set in the aggregation_bits bitfield, with repeated signatures if one validator maps to multiple indices within the subcommittee.

Broadcast sync committee contribution

If the validator is selected to aggregate (is_sync_committee_aggregator()), then they broadcast their best aggregate as a SignedContributionAndProof to the global aggregate channel (sync_committee_contribution_and_proof topic) two-thirds of the way through the slot-that is, SECONDS_PER_SLOT * 2 / 3 seconds after the start of slot.

Selection proofs are provided in ContributionAndProof to prove to the gossip channel that the validator has been selected as an aggregator.

ContributionAndProof messages are signed by the aggregator and broadcast inside of SignedContributionAndProof objects to prevent a class of DoS attacks and message forgeries.

First, contribution_and_proof = get_contribution_and_proof(state, validator_index, contribution, privkey) is constructed.

def get_contribution_and_proof(state: BeaconState,
                               aggregator_index: ValidatorIndex,
                               contribution: SyncCommitteeContribution,
                               privkey: int) -> ContributionAndProof:
    selection_proof = get_sync_committee_selection_proof(
        state,
        contribution.slot,
        contribution.subcommittee_index,
        privkey,
    )
    return ContributionAndProof(
        aggregator_index=aggregator_index,
        contribution=contribution,
        selection_proof=selection_proof,
    )

Then signed_contribution_and_proof = SignedContributionAndProof(message=contribution_and_proof, signature=signature) is constructed and broadcast. Where signature is obtained from:

def get_contribution_and_proof_signature(state: BeaconState,
                                         contribution_and_proof: ContributionAndProof,
                                         privkey: int) -> BLSSignature:
    contribution = contribution_and_proof.contribution
    domain = get_domain(state, DOMAIN_CONTRIBUTION_AND_PROOF, compute_epoch_at_slot(contribution.slot))
    signing_root = compute_signing_root(contribution_and_proof, domain)
    return bls.Sign(privkey, signing_root)

Sync committee subnet stability

The sync committee subnets need special care to ensure stability given the relatively low number of validators involved in the sync committee at any particular time. To provide this stability, a validator must do the following:

Maintain advertisement of the subnet the validator in the sync committee is assigned to in their node's ENR as soon as they have joined the subnet. Subnet assignments are known EPOCHS_PER_SYNC_COMMITTEE_PERIOD epochs in advance and can be computed with compute_subnets_for_sync_committee defined above. ENR advertisement is indicated by setting the appropriate bit(s) of the bitfield found under the syncnets key in the ENR corresponding to the derived subnet_id(s). Any bits modified for the sync committee responsibilities are unset in the ENR once the node no longer has any validators in the subcommittee.

Note: The first sync committee from phase 0 to the Altair fork will not be known until the fork happens, which implies subnet assignments are not known until then. Early sync committee members should listen for topic subscriptions from peers and employ discovery via the ENR advertisements near the fork boundary to form initial subnets. Some early sync committee rewards may be missed while the initial subnets form.
To join a sync committee subnet, select a random number of epochs before the end of the current sync committee period between 1 and SYNC_COMMITTEE_SUBNET_COUNT, inclusive. Validators should join their member subnet at the beginning of the epoch they have randomly selected. For example, if the next sync committee period starts at epoch 853,248 and the validator randomly selects an offset of 3, they should join the subnet at the beginning of epoch 853,245. Validators should leverage the lookahead period on sync committee assignments so that they can join the appropriate subnets ahead of their assigned sync committee period.

26 KiB Raw Blame History