Add support for ability to start and stop IPFS via command `service ipfs on/off`.
Add support for `ProcessState.Errored` process state in the `ProcessManager`. This allows for processes being launched and stopped to trigger an error and the resulting process will be in an errored state. Processes in errored states can still attempt to be started and stopped.
`service ipfs on` - starts an IPFS node if not already started. Shows an error if the node is already starting or started.
`service ipfs off` - kills the running IPFS node as long as Embark has started the IPFS process. If the IPFS process was started externally, an error is shown.
return early
We could use similar comments for imports related to other `@types` packages,
but the need to do it for `@types/embark` (located in
`packages/embark-typings`) seems more pressing since `import ... from "embark"`
statements in the monorepo can be so easily misunderstood.
Note that the comments, and indeed the whole lines, are automatically erased
during babel transpilation of TypeScript since TS types aren't relevant after
the `.js` files are built.
If a package uses only `.js` then supply `--extensions ".js"`. If a package
uses only `.ts` then supply `--extensions ".ts"`. If a package uses both, then
supply `--extensions ".js,.ts"`.
The reason for this is that adding/removing TS/JS support ought to occasion
revising a package's `package.json` file and adjusting other scripts as well,
e.g. for linting. With these changes, it won't work to simply start adding
`.ts` files in a package's `src/` directory, which should prompt the developer
to review `package.json` and make the appropriate changes, and/or other
developers may realize changes need to be made during code review.
Implement scripts to collect coverage reports (JSON format) from all packages
in the monorepo that generate such reports. Reports are copied to
`<root>/.nyc_output/coverage-[pkg-dir-name].json`.
Implement scripts to generate a combined html report in `<root>/coverage`.
Adjust root `reset` and `clean` scripts to delete `<root>/.nyc_output` and
`<root>/coverage`.
Implement a script in `<root>/package.json` to generate a `text-lcov` report
and upload it to coveralls from CI builds. Remove coveralls from
`packages/embark`.
Supply `packages/embark` with an nyc configuration in its `package.json` and
have its `"test":` script generate both `json` and `html` reports.
Use nyc with `embarkjs`'s test suite: supply an nyc configuration in its
`package.json` and have its `"test":` script generate both `json` and `html`
reports.
Adjust `embarkjs`'s tests for more accurate coverage reporting.
Add support for `service webserver on/off` commands.
Deprecate commands `webserver start/stop` in favor of `service webserver on/off`.
Handles passing through of arguments to the function executed after process launch.
`service webserver on` - Enables the webserver serving the DApp. Shows an error if the webserver is already starting or started.
`service webserver off` - Disables the webserver serving the DApp. Shows an error if the webserver is already stopping or stopped.
`webserver start` - This command has been deprecated in favor of `service webserver on` and will be removed in future versions.
`webserver stop` - This command has been deprecated in favor of `service webserver off` and will be removed in future versions.
Several `embarkjs-*` packages specify a `"test":` script in their respective
`package.json` files but lack any tests, causing `yarn test` in the root of the
monorepo to fail. For now, disable those scripts.
Add support for `service blockchain on/off` in the console.
Add service on/off command for each process started by, ie `service blockchain on/off` and `service whisper on/off`.
`service blockchain off` - Kills the blockchain process, stops the web3 provider, and shuts down the proxy (if used). In the case of `embark blockchain`, the entire process is exited.
`service blockchain on` - Starts the blockchain process *as a child process of the main embark process* then starts the web3 provider. This happens regardless of whether or not it was initially started with `embark blockchain` (see known issues).
## Known issues
1. If the blockchain process was started with `embark blockchain`, and then the blockchain process is killed with the `service blockchain off` command, when the blockchain process is restarted with `service blockchain on`, it will be restarted as a child process of the main embark process. It may be possible to allow for the blockchain process to be restarted in the same process it was originally started in, however this will take more development effort and can be handled in a different PR.
2. Parity has not been tested as it is currently not working in the master branch.
3. This PR adds a generic registration of commands for each process, ie `service whisper on/off`, however the only supported command is the `service blockchain on/off` command. Further support for other commands can be handled in separate PRs.
Errors emitted as part of the `deployAll()` routine got swallowed by
Embark, leaving users in the unknown when the deployment process
"froze".
This commit ensures errors emitted are now logged, making it obvious
when something went wrong.
This commit introduces a feature where users can specify which files should be removed
as part of Embark's `reset` command.
This is done by specifying the `options.reset` section in a project's `embark.json`.
The possible options are `defaults: bool` and `files: Array<String>`:
```
// embark.json
{
...
"options": {
"reset": {
"defaults": true,
"files": ["some.file", "some/other.file"]
}
}
}
```
`defaults` tells Embark whether or not it should remove the default files that are
defined by the `reset` command. Setting it to `false` will prevent Embark from
removing any of these (mostly files located inside `.embark`).
This gives users fine control as they now can re-add subsets or those file paths
in the `files` property.
If `options.reset` doesn't exist Embark will do the default behaviour, which is
is simply resetting/removing the files it has always removed.
It now also honors `generationDir` and `buildDir` as part of the defaults.
`webSocketProcess` function in `embark-api-client` expects only a process name,
but cockpit was calling it with name-strings prepended with `/process-logs/`
resulting in bad URLs. Revise cockpit's `services/api` module to call
`webSocketProcess` with process names only.
Embark API server's development proxy from port 55555 to 3000 was attempting to
inappropriately forward an `/embark-api/` endpoint for the blockchain process
logs to Create React App's development server. Why it was only happening for
the one endpoint is not known but probably has to do with timing around
registration of the API server's express routes.
The problem can be fixed with a one-line `filter:` function in the options for
`express-http-proxy`. However, it was realized that to fix an unrelated
problem, whereby the proxy doesn't forward websockets to CRA such that hot
reload doesn't work when accessing `embark-ui` in development on port 55555, a
switch to `http-proxy-middleware` would be required. That was quickly
attempted (easy switch) but there are outstanding [difficulties][bug] with
`webpack-dev-server` and `node-http-proxy` that cause CRA to crash.
Switch strategies and refactor the API module to serve a page on port 55555 (in
development only) that alerts the developer `embark-ui` should be accessed on
port 3000. The page redirects (client-side) after 10 seconds, with URL query
params and/or hash preserved. A future version could instead do client-side
polling of port 3000 with `fetch` and then redirect only once it's
available. The reason for not redirecting immediately is that the intermediate
page makes it more obvious what needs to be done, e.g. CRA dev server may need
to be started with `yarn start`.
[bug]: https://github.com/webpack/webpack-dev-server/issues/1642
This commit enables new `beforeDeploy` deployment hooks. With this change
it's possible to add `beforeDeploy` to either `contracts: {}` within the contracts
configuration, or an individual contract.
For example:
```
contracts: {
SimpleStorage: {
beforeDeploy: async (context) => {
}
}
}
```
Runs the hook before `SimpleStorage` will be deployed. Whereas
```
contracts: {
...
beforeDeploy: async () => {
}
}
will be executed before *all* Smart Contracts will be deployed.
This will allow users to generated deploy hook specific output using the supplied `logger` within deployment hooks.
The logger will generate an output a la:
```
ContractName > deploymentHook > Output
```
and
```
afterDeploy > Output
```
respectively.
E.g. an `onDeploy` hook config like this:
```
contracts: {
SimpleStorage: {
fromIndex: 0,
args: [100],
onDeploy: (context) => {
context.logger.log('Hello from on deploy');
}
}
}
```
Will output:
```
SimpleStorage > onDeploy > Hello from on deploy
```
Support embarkjs-whisper with external pipeline.
`embarkjs-whisper` is required by code that is through the VM, and therefore the `embark` package needs to be able to resolve `embarkjs-whisper`.
Create a dev tx (a 0-value tx that is sent from the —dev account to itself) when a request goes through the proxy, but does not get a response after 5 seconds.
Log requests to disk (when log level is trace - enabled with the embark option `—loglevel trace`) that have not received a response and for which a dev tx has been sent.
Add logging to a `proxyLogs.json` log file as well, so that this information can be gleaned later for debugging purposes.
This particular PR Is meant to workaround an issue with running geth with the `—dev` option, as some transactions appear to get stuck, which then builds up further txs in a queue. Only when another tx is sent is the queue then purged as expected.
The remaining issue is that even though a dev tx is sent to relieve the queued txs, the originally offending tx still never receives a response from the node. This was the motivation behind creating a proxy log, so that a dev can inspect the txs that are essentially dropped.
**NOTE:** the base branch of this branch is `refactor/devfunds`. Please merge that branch first.
Change name “DevFunds” to “DevTxs”.
Remove unused functions in dev_funds (create accounts, unlock accounts, fund accounts).
Add console command `sendtx` to send a one-off dev transaction.
Modify the dev tx to send a 0-value tx to itself (ie the `web3.eth.defaultAccount` which is the `—dev` account).
Deprecate the command `regularTxs on/off` in favour of `devtxs on/off` (notice the casing).
Strip regulartxs from cockpit and modify the browser warning to instruct users to run a console command.
This commit has been originally cherry-picked from d0d89fc5ae and
slightly modified to update all packages, as meanwhile, new packages have been added to `master`.
The reason this commit is cherry-picked from `4.0.x` branch is because
it wasn't created from `master`.
Purpose is mainly to update `CHANGELOG` and get the package versions in sync again.
Display five contracts per page in the dashboard. Display ten contracts per
page in the contracts explorer and deployment page.
Sort contracts by name. In the future we can implement an option to sort by
block number and index within a block by calculating and including that
information as part of the server-side api response (based on a contract's
txhash).
Remove unnecessary contract filtering in the components since the containers
take care of it.
Make use of `listenToContracts` / `stopContracts` in DeploymentContainer.
feature(@embark/embarkjs-whisper: make embarkjs whisper plugin a module on its own
feature(@embark/embarkjs-whisper: make embarkjs whisper plugin a module on its own
During work on PRs #1492 and #1494 it became evident that it's not desirable to
show pagination controls unless the number of pages is greater than one.
Display a truncated account balance if the balance is greater than 20
characters in length. This keeps the "Balance", "Tx Count", and "Index" fields
well-aligned in lists of accounts.
In the account details page continue to show the full balance.
Display two accounts per page in the explorer overview. Display ten accounts
per page in the accounts explorer page.
Sort accounts by their api-supplied index numbers with the lowest index coming
first.
Change the `initBlockHeader` saga so that it triggers a re-fetch of accounts
and therefore the "Tx Count" numbers of displayed accounts will reflect
increased counts.
During deploy with a failing transaction, embark was crashing due to the variable `line` being passed in as undefined.
Add better error handling to catch this error and prevent embark from crashing.
Make tabs draggable so they can be arranged how the user would like.
The dragging functionality locks the tabs to the parent container.
Support for multiple rows of tabs.
Styling updates for selected tabs.
When connected to metamask, and “Injected Web3” is selected on the Deployment page of Cockpit, check to see if contracts have already been deployed or not.
For contracts that have not been deployed, or set to an address in the config, these should now all be re-deployable.
Supports libraries (that have bytecode with `0x73<address><bytecode>`).
Compare a contract's `originalFilename` property to a contract file's
normalized `originalPath` property instead of `filename`. The `filename`
property seems to have been removed.
Contract app hangs when attempting to test the solc contract in the test folder.
There were several causes:
1. The test contract needed a referenced contract path updated
2. Contracts that had been compiled in the JS tests were being deleted at the end of the JS test run, which caused errors with the files not being found. The fix was to reset the contracts config to no longer require the non-test contracts to be compiled/deployed.
3. Contract filtering was attempting to filter on a property `filename` that must have been changed to `originalFilename` at some point and therefore was not filtering properly.
4. The accounts used by the contract deployer were getting overwritten when `SolcTest` was instantiated and thus preventing the `remix_tests` `Assert` library from getting deployed.
Fix hang when the storage provider (IPFS or Swarm) was started externally before running Embark.
If IPFS/Swarm was already running before `embark run` was run, then the relevant `registerProvider` and `setProvider` code was not being run through the console, and thus the module init event was never fired, preventing the DApp from being built.
This PR refactors the way the IPFS/Swarm process is launched so that the `registerProvider` and `setProvider` code snippets are run through the console in the case of:
* IPFS/Swarm running externally from Embark
* IPFS/Swarm started in a child process by Embark
* Storage is disabled in the DApp config
TL;DR
=====
Unregister (disable) the service worker in production builds of Cockpit. The
CRA dev server doesn't enable the service worker, so no changes are needed in
that context, i.e. `yarn start` in the monorepo.
**NOTE**: to effect these changes a user will need to load production Cockpit at
`localhost:55555` and then close all Cockpit tabs (or restart the
browser). This should be done for each browser that has been used to access
production Cockpit. See the *Step-by-Step* section below for more information.
Rationale
=========
There are a couple of factors:
* It's a bit confusing that after stopping `embark run` the production build of
Cockpit is still accessible at `localhost:55555`. That's owing to CRA's
[offline-first behavior][PWA] per the service worker it creates, which
Cockpit [currently registers][current] (enables).
* It can be really confusing, if you don't know or forget about the service
worker's behavior, that after a production rebuild of Cockpit the old build
is still used in the browser, even after a page refresh. As [explained][ofb]
in CRA's docs: *"users will end up seeing older content until they
close (reloading is not enough) their existing, open tabs."* A similar effect
is seen when switching between DApps, e.g. teller and embark_demo.
The CRA docs point to [some code][code] that could be adapted to an alert in
the UI prompting the user to close all tabs and reopen the app. That approach
definitely makes sense for DApps built with CRA that have opted-in to the
service worker. In fact, the service worker behavior would be critical in DApps
that make use of connected-/react-router because cold loads of routes that
don't actually correspond to static files couldn't otherwise work, i.e. if the
DApp is being served from ipfs/swarm.
But for Cockpit itself, when served from localhost with an express backend that
we control, little seems to be gained from offline-first behavior vs. a more
familiar behavior, i.e. when `embark run` isn't running then Cockpit isn't
accessible.
Step-by-Step
============
Flushing a site's service worker from cache can be tricky. The following steps
outline an approach to making sure the Cockpit in use is the one with service
worker disabled.
1. The first screenshot below shows the JavaScript console from a fresh load of
Cockpit with the service worker enabled, i.e. from a build on `master` at time
of writing and `embark run` running for the `embark_demo`. Note the messages
re: *"workbox"* and *"precaching"*.
![][step-1]
2. The next screenshot shows what happens when `embark run` is stopped and the
browser is refreshed. Service worker makes the page available offline, though
there are errors related to embark's API not being accessible.
![][step-2]
3. (a) Cockpit gets rebuilt on this PR's `refactor/cockpit-service-worker`
branch and `EMBARK_UI_STATIC=t embark run` is started; see [previous
commit][prevcom] re: `EMBARK_UI_STATIC`. (b) The browser is refreshed. Note the
message at the bottom re: *"New content is available"*.
![][step-3]
4. The Chrome browser is closed completely (command-Q), reopened and
`localhost:55555` is loaded again. Note there are *still* messages re:
*"workbox"* and *"precaching"*.
![][step-4]
5. The page is refreshed again and now the messages are completely gone.
![][step-5]
6. `embark run` is stopped and the page is reloaded, but there's a connection
error because no process is listening on `localhost:55555` — proof that
the service worker is no longer in play!
![][step-6]
Steps 3(b) to 6 will need to be repeated for each browser (Firefox, Safari,
etc.) that visited `localhost:55555` when the service worker was enabled. And
they'll need to be repeated again if the browser is later used with a build of
Cockpit predating this PR.
[PWA]: https://facebook.github.io/create-react-app/docs/making-a-progressive-web-app
[current]: 4d4704ac6f/packages/embark-ui/src/index.js (L39)
[ofb]: https://facebook.github.io/create-react-app/docs/making-a-progressive-web-app#offline-first-considerations
[code]: https://github.com/facebook/create-react-app/blob/master/packages/react-scripts/template/src/serviceWorker.js#L66-L93
[step-1]: https://user-images.githubusercontent.com/194260/54885199-adfa0900-4e47-11e9-830b-1b92816b2354.jpg
[step-2]: https://user-images.githubusercontent.com/194260/54885202-b3575380-4e47-11e9-9c1e-24817472d9c4.jpg
[step-3]: https://user-images.githubusercontent.com/194260/54885209-bb16f800-4e47-11e9-8e23-8fbc3b4f48fa.jpg
[prevcom]: https://github.com/embark-framework/embark/commit/322033cc
[step-4]: https://user-images.githubusercontent.com/194260/54885212-bfdbac00-4e47-11e9-9c8c-db90228d953a.jpg
[step-5]: https://user-images.githubusercontent.com/194260/54885214-c538f680-4e47-11e9-9963-58fd041675f0.jpg
[step-6]: https://user-images.githubusercontent.com/194260/54885217-ccf89b00-4e47-11e9-967a-7f8a523d4a92.jpg
Implement a `/*` server-side catch-all route for Cockpit that loads Cockpit's
`index.html`.
This change is necessary with intent to disable offline-first behavior in
production builds of Cockpit. Cockpit's service worker effectively translates
server-side route unavailability into client-side behaviors of
connected-react-router. When the service worker is unregistered the same will
be accomplished via the server-side catch-all route.
Implement fallback pages for when embark is in the monorepo but Cockpit's
Create React App development server isn't yet started or isn't yet responsive.
Implement a fallback page for when the static build of Cockpit is missing. When
embark is in the monorepo, give instructions for building Cockpit. Otherwise,
report that the distribution is broken.
Deprecate the environment variable `EMBARK_DEVELOPMENT` in favor of
`EMBARK_UI_STATIC`. Unless the latter is truthy at runtime, when embark is in
the monorepo the CRA dev server of Cockpit will be accessible at
`localhost:55555` via proxied requests to `localhost:3000`. The deprecation is
not a breaking change as `EMBARK_DEVELOPMENT` / `EMBARK_UI_STATIC` are not
relevant to normal users, but only to developers working on embark itself.
Bump `express-http-proxy` to the latest version.
If a transaction is sent and the proxy is enabled, but the function hash (identified in the data of the transaction) is not recognized as a function of the contract (ie does not match a function hash in the contract’s ABI), then embark would crash.
The fix was to introduce error handling in `transactionUtils.getTransactionParams` that defaults the contract name and params to `UNKNOWN`.
This can be replicated by
1. Clone https://github.com/mortimr/ethvtx_embark
2. `embark run` the dapp
3. Connect with Metamask
4. Ensure you have enough funds
5. In the “Tx calls” bubble, enter a new value, then click “Set Value”.
6. When the Metamask dialog appears, the error should have already happened. The console shows:
```
embark/src/lib/utils/transactionUtils.ts:58
const functionName = func.functionName;
^
TypeError: Cannot read property 'functionName' of undefined
at functionName (/Users/mortimr/Horyus/ethvtx_embark/node_modules/embark/src/lib/utils/transactionUtils.ts:58:29)
at ConsoleListener.getTransactionParams [as _onIpcLogRequest] (/Users/mortimr/Horyus/ethvtx_embark/node_modules/embark/src/lib/modules/console_listener/index.js:102:41)
at _onIpcLogRequest (/Users/mortimr/Horyus/ethvtx_embark/node_modules/embark/src/lib/modules/console_listener/index.js:76:12)
at Server._done (/Users/mortimr/Horyus/ethvtx_embark/node_modules/embark/src/lib/core/ipc.js:81:7)
at Server.emit (/Users/mortimr/Horyus/ethvtx_embark/node_modules/event-pubsub/es5.js:74:21)
at Server.gotData (/Users/mortimr/Horyus/ethvtx_embark/node_modules/node-ipc/dao/socketServer.js:194:14)
at Socket.emit (events.js:189:13)
at Socket.EventEmitter.emit (domain.js:441:20)
at addChunk (_stream_readable.js:284:12)
at readableAddChunk (_stream_readable.js:261:13)
at Socket.Readable.push (_stream_readable.js:220:10)
at Pipe.onStreamRead [as onread] (internal/stream_base_commons.js:94:17)
```
When a fallback function is encountered give its signature as `function()`,
disable row expansion, and omit the interaction form. Also label with a
`fallback` badge.
Create React App automatically determines the base path for links within
production build artifacts based on the project's `"homepage"` field in
`package.json`.
An [alternative][alt-setting] is to set the `PUBLIC_URL` environment variable
in `.env.production`. Take that approach so embark-ui's `"homepage"` can
continue to point to its home in the monorepo on GitHub.
Generate source maps in the production build of embark-ui. Doing so increases
the size of the package's tarball by a few MB (it was already large because of
the editor component), but the benefits of being able to much more easily debug
a production build (e.g. when interacting with users experiencing problems)
outweigh the size cost.
[alt-setting]: https://github.com/facebook/create-react-app/blob/master/packages/react-scripts/config/paths.js#L36
`"rxjs"` is [preferable][rxjs-pkg-name] in a CommonJS context,
e.g. node. Existing embark code is `require`-ing from the unscoped package
name, which worked in the monorepo because some other dependency specifies
`"rxjs"` and yarn hoists it to the root of the workspace. In a production
install of embark, though, `require('rxjs')` was failing.
[rxjs-pkg-name]: https://github.com/ReactiveX/rxjs/issues/2577
When testing production installs of embark 4.0.0-beta.1 (local registry), the
`restrictPath` mechanism of `core/fs` was too restrictive, interfering with
template generation (cause not completely determined). Also, it's known that
`restrictPath` causes problems when resolving plugins, etc. from "higher up"
`node_modules` paths, e.g. in the monorepo.
Introduce `codeRunner/fs` which uses `restrictPath` as before, and in `core/fs`
remove `restrictPath`. Revise the other `codeRunner` modules to use
`codeRunner/fs`.
Don't implicitly rely on explorer overview having been loaded to initially
populate `entities.transactions`. Also, that container should watch for new
blocks/transactions same as the other explorer containers.
Restore `fetchTransactions` and related to TransactionsContainer. It's no
longer the basis of pagination (it didn't work as desired), but when navigating
through the transaction pages that action will ensure more transactions are
fetched so that the account page will list more of an account's transactions
over time. That was a side effect of `getTransactions` before it was removed in
favor of `getBlocksFull`, which is still the basis of revised pagination logic
in the transactions explorer.
Revise calculations related to transactions and pagination in the transactions
explorer and explorers overview.
Make the number of transactions to display per page configurable and set it to
3 in the explorers overview. Display a "No transactions..." message instead of
"0" when there are no transactions to display.
Introduce a `blocksFull` prop, action, api, etc. for calculating lists of
transactions relative to block objects that contain full transaction objects
instead of hash strings (the function backing the blocks endpoint already
supports that) and transaction receipts. In the future, the receipts can be
used to filter out constructor transactions for silent contracts.
Make pagination display conditional within the blocks explorer, same as in the
transactions explorer.
Filter silent contracts in the views that display contracts lists rather than
with `formatContractForDisplay` because the old approach prevents interaction
with a silent contract if a link to it is followed from the blocks or
transactions explorer, which is not desirable.
Rename contract "Transactions" tab to "Log". Display and allow filtering of all
contract methods. Disable debug button for pure/view functions and the
constructor.
Revise the filtering logic so that filters are combined together. Make the
status filter a drop down menu like the others.
Revise styling for consistent row height, alignment of text, and button sizes;
use a monospaced font in some cases to achieve the effect.
Handle enter/return correctly in forms within a contract's Interact tab.
Remove event rows from a contract's Interact tab.
Track pure/view calls in the blockchain proxy so they can be logged server-side
by console listener and reported in Cockpit within a contract's Log tab.
Eliminate double logging in the contracts manager. Ensure contracts deployed on
a fresh `embark run` have an `address` / `deployedAddress` property.
Revise calculations related to block numbers and pagination in the blocks
explorer and explorers overview.
Make the number of blocks to display per page configurable and set it to 5 in
the explorers overview.
Previously, storage providers in embarkjs were not waiting for their respective storage process (ipfs and swarm) to start before running `registerProvider` and `setProvider` in the console.
This PR forces the `registerProvider` and `setProviders` from running in the console until the storage processes have loaded. As a side effect, the code generation of `EmbarkJS` must wait for the storage module ot be fully initiated (ie once the processes have launched and the `registerProvider` and `setProviders` have been run) before generating the code.
This fixes errors pertaining to `Could not connect to a storage provider using any of the dappConnections in the storage config` as these errors were typically caused by `setProviders` being called before the storage processes had fully launched.
Make changes by running these commands in the root of the monorepo:
**bugs**
```shell
npx lerna exec --concurrency 1 --stream -- \
'DIRPATH=$(realpath $PWD --relative-to=$LERNA_ROOT_PATH); \
npx json -I -f package.json -e "this.bugs=\
\"https://github.com/embark-framework/embark/issues\""'
```
**homepage**
```shell
npx lerna exec --concurrency 1 --stream -- \
'DIRPATH=$(realpath $PWD --relative-to=$LERNA_ROOT_PATH); \
npx json -I -f package.json -e "this.homepage=\
\"https://github.com/embark-framework/embark/tree/master/${DIRPATH}#readme\""'
```
Don't commit changes to private packages, with the exceptions of embark-typings
and embark-reset because those may switch from private to public, and also
because the latter will be included in `node_modules` of embark even if it is
private since embark-reset is presently a bundled dependency of embark.
Don't include the homepage and bugs fields in dapps generated from the template
packages, except for the demo. Set those dapps' description field to an empty
string.
Ensure every package (inc. private packages) has a description.
Ensure every package (inc. private packages) has a README that begins with:
```markdown
`[pkgJson.name]`
================
> [pkgJson.description]
Visit [embark.status.im](https://embark.status.im/) to get started with
[Embark](https://github.com/embark-framework/embark).
```
Don't include the README in dapps generated from the template packages, except
for the demo.
Prevent embark from crashing when app assets are not specified in `embark.json`.
Previously, if the `app` property of `embark.json` was missing, embark would crash with the error `TypeError: Cannot convert undefined or null to object`.
With this PR, the missing property is null-checked.
Add an `enabled` property to the pipeline config. This lets developers disable the pipeline using the config file.
Updates to the enabled property will be reflected while embark is running. For example if embark is running with the pipeline, setting `enabled: false` in the pipeline config will build/deploy the contracts but not run the pipeline. Conversely, if embark is running with the pipeline disabled, enabling the pipeline in the config will build/deploy the contracts then build the dapp.
`package.json` allows for a [`"files"` whitelist][files] to be specified as an
alternative to a top-level `.npmignore` within a package root. Maintaining
whitelists is generally easier and less error-prone than maintaining
blacklists, so implement a `"files"` list for all non-private packages in the
monorepo and remove unneeded `.npmignore` files.
Switch `embark-reset` from being a private package to one that will be
published, adjust the workspace's `"nohoist"` setting accordingly, and no
longer specify `embark-reset` as a bundled dependency of `packages/embark`. I
originally thought there might be a good reason not to publish it, but I no
longer think so.
Remove unnecessary LICENSE files in `packages/{embark,embark-ui}` since Lerna
will automatically copy the root LICENSE into any packages lacking that file,
i.e. before tarballs are packed and published to the NPM registry.
Change the `"author"` field of `packages/embarkjs-connector-web3` to match the
other packages, i.e. such that it matches the copyright assignment in the root
LICENSE. If that's not a desirable thing to do, then instead that package can
have a separate LICENSE file that has a copyright assignment for `"Jonathan
Rainville"`.
Supply some missing `.npmrc` files in `packages/*`.
[files]: https://docs.npmjs.com/files/package.json#files
https://github.com/embark-framework/embark/pull/1367 introduced a change that prevented the `blockchain_listener` from listening to logs until the IPC server connected. However, the restriction went too far, and included restricting registration of console commands and API endpoints for the regular transactions feature.
This fix reverts the changes that affect registration of regular txs endpoints and console commands.
It's possible to pass a `--require` option to mocha to load a script that sets
up `process.env.DAPP_PATH` as needed for embark's tests; that approach is
preferable to running mocha in a child process because when running in a child
process there seemed to be problems with sources maps and with VS Code's
debugger.
After the changes in this PR, the following works as expected, i.e. when there
are runtime errors line/col numbers are reported per the files in `src/`:
```
$ yarn build:no-ui
$ cd packages/embark
$ npx mocha "dist/test/**/*.js" \
--exit \
--no-timeouts \
--require ./scripts/test.js \
--require source-map-support/register
```
And the following VS Code launch config works well for me:
```json
{
"type": "node",
"request": "launch",
"name": "test - packages/embark",
"cwd": "${workspaceFolder}/packages/embark",
"program": "${workspaceFolder}/node_modules/mocha/bin/_mocha",
"args": [
"'dist/test/**/*.js'",
"--exit",
"--no-timeouts",
"--require",
"./scripts/test.js",
"--require",
"source-map-support/register"
],
"autoAttachChildProcesses": true,
"sourceMaps": true
}
```
NOTE for VS Code users: I found it's important to specify
`"'dist/test/**/*.js'"` in the launch config instead of
`"\"dist/test/**/*.js\""`, and that it's important to specify `"program":
"${workspaceFolder}/node_modules/mocha/bin/_mocha"` vs. `"program":
"${workspaceFolder}/packages/embark/node_modules/.bin/mocha"`.
KNOWN ISSUES: when there are runtime errors during `yarn test` in
`packages/embark`, line/col numbers reflect the sources in
`package/embark/dist` because `nyc` isn't setup correctly to use the
source-maps generated by babel. A solution has not yet been found.
See: https://github.com/npm/rfcs/blob/latest/implemented/0010-monorepo-subdirectory-declaration.md
Make changes by running this command in the root of the monorepo:
```shell
npx lerna exec --concurrency 1 --stream -- \
'DIRPATH=$(realpath $PWD --relative-to=$LERNA_ROOT_PATH); \
npx json -I -f package.json -e \
"this.repository=\
{\"directory\": \"$DIRPATH\", \
\"type\": \"git\", \
\"url\": \"https://github.com/embark-framework/embark.git\"}"'
```
Don't commit changes to private packages, with the exceptions of embark-typings
and embark-reset because those may switch from private to public, and also
because the latter will be included in `node_modules` of embark even if it is
private since embark-reset is presently a bundled dependency of embark.
Don't include the repository field in dapps generated from the template
packages, except for the demo.
Switching between the two tabs shown on the Dashboard for the cockpit was removing some of the logs that were previously displayed. This was due to an overlap in `id`’s being assigned to the logs from different processes.
To alleviate this, the reducers has been updated to not only check `id` but also `process.name`.
Additionally, the reducer was updated so that the number of logs for **each process** is set to `ELEMENTS_LIMIT`. For example, our `ELEMENT_LIMIT` is currently set to `200` and it would have meant that the total number of process logs across all processes would have been capped at 200. The current changes in this PR allow for 400 total logs, given that we have two processes being monitored for logs.
The services websocket was initiated in the AppContainer and causing all child components to continuously re-render every time there was a service check (which is effectively every second). In addition, the socket was never stopped when not needed (ie when the services component was unmounted).
Create a ServicesContainer that initiates the websocket as part of the container, and stops the socket when the container is unmounted.
Move the ContractsList to be part of the ContractsContainer with a `mode` switch.
Add Deployment page title and description.
Previous to this PR, `web3` was only made available to each test case, as it was put in to the global namespace after each test deploy. This was causing issues for tests that use `web3` in the test description (ie in `describe()` or `contract()` functions), as the deploy had not happened yet, and thus `web3` was not yet available. The error encountered in these cases was `web3 is not defined`.
This PR puts `web3` in the global namespace before setting up the tests, making it available to test descriptions.
Allow `embark upload` to upload to IPFS/Swarm even if the storage module is disabled in the storage config.
An easy way to test this is to set `config/storage.js` > `enabled` to `false` in the demo. Then run `embark upload`.
A console warning is meant to appear in the browser console when the dapp is connecting to web3 using metamask and the blockchain client is geth. The warning displays information telling the user they should enable regular transactions to prevent known issues regarding transactions getting stuck.
The issue fixed here pertained to `warnAboutMetamask` vs `warnIfMetamask` - maybe there was a change that introduced this issue upstream.
Additionally, enabling and disabling of regular transactions via an API endpoint did not
Add ability to stop regular txs via query string, and validate request parameters.
This issue was caused by a string to integer conversion. In JavaScript,
when converting a string that starts with `0` (which is the case for tx
hashes) to an integer using `parseInt` it will always yield 0. That,
combined with a block with number 0 would always return a block result
instead of the transaction.
```
> parseInt("0xluri", 10)
0
```
This PR checks if the resulting number equals the string that was
provided on top of checking for the block number.
Previously, templates were in a subdirectory of `packages/embark`. Reorganize
them so that they are member packages of the monorepo. This allows them to
cleanly depend on other members of the monorepo,
e.g. `embarkjs-connector-web3`.
It is desirable for the templates, in the context of the monorepo, to specify
embark as a dependency, to take advantage of `npx embark test` (and it's a
"forward looking" setup re: how we plan to evolve embark). However, if embark
were to specify the template packages as dependencies a circular relationship
would be introduced, which is [unsupported by Lerna][circular]. Therefore,
revise the template generator so that all templates are resolved / fetched at
runtime, i.e. `boilerplate`, `demo`, and `simple` are no longer
"built-ins" *per se*. This change won't be apparent to embark's users, but it
does mean that the template generator won't work (in a production install of
embark) if it can't connect to the npm registry, i.e. when the user runs
`embark demo` or `embark new [--simple]`. When embark is inside the monorepo,
templates are resolved and copied from the yarn workspace rather than being
fetched from the registry, which is convenient for development. Also, any
template dependencies that are members of the monorepo are linked into the
copied template's `node_modules` rather than being installed from the registry,
again for convenience. During template generation, remove scripts and
dependencies that pertain only to membership in the monorepo; for now, that
involves removing embark as a dependency since we're not quite ready for that
arrangement to be the default, i.e. outside of the monorepo.
Refactor the root scripts so that more of them can consistently be used with
Lerna's filter options, e.g. `--scope` and `--ignore`. "Combo" scripts that
don't support filtering generally have a `:full` postfix.
Flip `clean` and `reset` scripts at the root and in the member packages for
consistency re: Lerna's notion of `clean` and embark's notion of `reset`. Have
each package run its `reset` script when its `clean` script is invoked (and
that's all for now), relying on `lerna clean` to delete packages'
`node_modules` in view of how Lerna's topological sorting works.
Lift the implementation of `embark reset` into a private package in
`packages/embark-reset` and make it a bundled dependency of embark. Packages in
`dapps/*` depend on `embark-reset` directly and make use of it with `npx
embark-reset` (but only in monorepo context). This removes a "wart" where
reboots could show errors when embark's sources aren't already built in
`packages/embark/dist`. Users will not notice any difference since `embark
reset` works as before, transparently making use of the `embark-reset`
package. The only downside to having it be a bundled dependency of embark is
that bundled deps have all of their `node_modules` included in the tarball
built with `npm pack` (that's why having the templates as bundled dependencies
of embark isn't a viable approach). However, `embark-reset` only has one
dependency, `rimraf`, which is a tiny module, so the cost seems acceptable.
As part of the reorganization, move `test_dapps` into `dapps/tests` and
`packages/embark/templates` into `dapps/templates`. Keep the directory names
short but revise the package names to facilitate simple filtering with
`embark-dapp-*`. Consolidate `.yarnrc` and `.gitignore` and clean up some
redundant ignore listings.
Scripts run with `--scope embark-dapp-*` use `--concurrency=1` to avoid
conflicts that could arise over network ports. The `ci:full` and `qa:full`
scripts use `--concurrency=1` in all scopes, for two reasons: resource
limitations on Travis and AppVeyor result in slower runs with concurrency >1,
and if something fails in those contexts it's easier to see what went wrong
when Lerna's output isn't interleaved from a bunch of scripts in `packages/*`.
Bump the Lerna version.
[circular]: https://github.com/lerna/lerna/issues/1198#issuecomment-442278902
Reproduce:
1. Go to cockpit > transactions
2. Click a transaction
3. There will be a flicker of an error, then the decoded tx displays OK. Inspecting the network requests, there is a 500 error with a response of
```
AssertionError [ERR_ASSERTION]: invalid remainder
```
This error is also printed in the console.
The issue is that the transaction is not a raw transaction, so instead of trying to decode the non-raw transaction, the transaction can be decoded by web3.
**Cache suggestions**
Suggestions are cached for better performance on each request. When contracts are deployed, the suggestion cache is cleared, allowing for updated contract methods to be built in to the suggestions.
** Handle edge cases **
Handle cases when console command is parsed as an empty string, or possibly returns an empty object, which would cause `Object.getOwnPropertyNames` to throw an error (that is ultimately swallowed).
Swarm was not being registered as a service due to a recent change that introduced a bug. The previous change was meant to register “swarm” as a console command to provide output for the `swarm` console command when swarm had not been registered in the VM. The bug, however, returned too early in the cases when swarm was meant to be enabled, thus effectively not registering the entire process.
The fix simply returns only when swarm is in fact, disabled, and also alters slightly the way swarm is determined to be enabled (the changes of which have been copied over to `ipfs`).
Add the ability to pass an error in the callback of an event action.
Currently, event actions could either pass back a an error OR a result, but not both, and with no way to distinguish between the two parameters. This PR adds the ability to pass an error as the first parameter of the action callback.
An example of a use case that this fixed: errors on `deployIf` were silently swallowed, which has now been fixed.
All instances of `events.request(“deploy:contracts”)` were given an `error` parameter in their callback, and errors printed if it is not undefined.
All instances of `registerActionForEvent` were combed to ensure any callbacks were passing the expected error and result.
`web3.eth.getAccounts` was returning an empty array in the console due to a change, that I’m unsure of what the original intention was for.
@andremederios, could you please take a look, and let me know if this breaks the intention of the original changes?
Cockpit whisper messages were not being subscribed to due to a inocuous bug that would swallow errors and ultimately not be subscribed to the `rxjs` observer.
This PR fixes a number of issues relating to the cockpit console.
#### Console commands display in cockpit console
Fix cockpit console not displaying console usage commands that included “<usage option>”. For example “resolve <name>” would not display the “<name>” part, as it was attempting to write this in as HTML (ansi-to-html conversion).
This was fixed by replacing any instances of “<usage>” with “[usage]”. Please note that future usage strings should not contain text wrapped in “<>”.
#### Autosuggestions for “web.eth.” not appearing
Fix “web3.eth.” not suggesting members of `web3.eth`. This was due to a `Object.keys(web3.eth)` throwing `'getOwnPropertyDescriptor' on proxy: trap returned descriptor for property 'defaultAccount' that is incompatible with the existing property in the proxy target` in the console. Changing `Object.keys` to `Object.getOwnPropertyDescriptor` solved the problem.
#### Fix autosuggestion of known console commands (ie from plugins)
Fix known console commands (ie from plugins) not being autosuggested. For example, typing “web”, should autosuggest `webserver start/stop`, `log webserver on`, and `log webserver off`.
This PR adds in support for registered console commands (from plugins).
In addition to `EmbarkJS.Storage` not being available in the console (ie `await EmbarkJS.Storage.isAvailable() alway returned false), the error `Could not connect to a storage provider using any of the dappConnections in the storage config` would always appear in the console. The storage operations in the dapps were working OK.
The fix to this was three-fold:
1) Wait for the ipfs process to be started before attempting to run the `EmbarkJS.Storage.registerProvider/setProvider` in the console.
2) Wait for `EmbarkJS.Storage.registerProvider` to be called before `EmbarkJS.Storage.setProvider`. This was actually handled in the previous PR.
3) Remove any async operations from the `setProviders` method in the storage module. This was causing `callback is not defined` errors which were being swallowed and masqueraded as an unsuccessful attempt to connect to a `dappConnection` or `upload` config.
For every provider registered and set with EmbarkJS, auto generate events to inform other modules of the state of the provider.
Any provider that belongs to EmbarkJS (currently Blockchain, Names, Messages, and Storage) will have both a `runcode:<provider name>:providerRegistered` and a `runcode:<provider name>:providerSet` event created automatically when the `CodeRunner` is instantiated.
Once the `registerProvider` code is run through the VM, ie `EmbarkJS.Blockchain.registerProvider(…)`, the corresponding event will be fired, ie `runcode:blockchain:providerRegistered`.
Likewise, once the `setProvider` code is run through the VM, ie `EmbarkJS.Blockchain.setProvider(…)`, the corresponding event will be fired, ie `runcode:blockchain:providerSet`.
Additional updates/fixes with this PR:
* Move `CodeRunner` to TypeScript
* Fix console errors with ENS and Storage due to a recent PR that waits for `code-generator:ready`. The solution here was to ensure that `code-generator:ready` is requested, so that premature events can be handled.
Fix demo not running, by fixing the following issues:
This was due to the removal of `Web3` from the VM initialisation in a recent PR. The reasoning behind the removal was so that the modules that need Web3 could require it as needed, however, it is needed in 3 modules (ENS, Whisper, and web3Connector), all of which would define `const Web = …` in the code generated EmbarkJS, thus causing issues in itself. This needs to be rethought prior to removing it from the VM sandbox.
Because Web3 is back to being required in the global sandbox of the VM, it does not need to be registered in the `web3Connector` module, hence the removal of the `runcode:register`.
Module not found: Error: Can't resolve 'embarkArtifacts/contracts/SimpleStorage.js' in '/Users/emizzle/temp/embark_demo/app/components’`
This was fixed by replacing
```
import SimpleStorage from 'Embark/contracts/SimpleStorage';
```
with
```
import SimpleStorage from '../../embarkArtifacts/contracts/SimpleStorage';
```
revert changes changing __Web3 to Web3