* fix: use cluster_id 0 for peer store related tests
* test: simulation for issue
* fix: use cluster_id not 0 and subscribe to static shard for go-waku
* fix: revert env values to original defaults
* test: establish basic node setup for pe
* test: debug peer retrieval error with nwaku
* fix: disable discovery v5 on the requester node
* fix: assert node3 peer store to exact content
* test: get peers for filter node
* test: get peers after node1 was restarted
* fix: allow tests to run only when Node2 is Go-waku
* fix: revert NODE_1 to its original default
* test: get peers from peer store
* test: add peers to peer store
* fix: add go_waku support
* test: placeholder for Issue 1549 solution test
* test: expect two peers for two protocols/services
* test: restart survival with persistent peer store
* fix: add issue to skip mark
* fix: move Waku related methods to waku_node module
* test: full peer store takeover
* fix: add kill of Node 1
* fix: remove debug info
- skip while waiting on issue 2792
* test: peer store content after node restart
* fix: revert nwaku image back to use latest
* fix: added delays to let nodes finish discovery
* fix: move peer_persistence config steps out of start
* fix: NODE1 default back to DEFAULT_GOWAKU
* fix: partial refactor for setup_first-second_relay_node
* test: daily workflow after refactor
* test: shorter name for daily workflow
* test: RLN only
* test: increase timeout
* test: check Sepolia API endpoint
* test: run RLN tests in single thread
* fix: remove Sepolia API check
* fix: skipp all RLN tests till registration works
* fix: remove test workflow
* first commit
* get message tests 1
* store tests with node restarts
* reliability tests
* store tests
* fixes
* more tests
* fixes
* new store tests
* new store tests
* adjustments
* adjust tests for go-waku
* postgress test
* postgress test
* fixes
* small fixes
* reliability updates
* postgress test
* adjsutmens for go-waku
* test: wait longer for info endpoint to start
* test: health endpoint response parsing
* fix: health endpoint response parsing
* fix: remove debug from health response parsing
* fix: mark on chain tests to skip again
* fix: check_healthy accepts both text and json response
* fix: delete test workflow
* fix: simplify if statements
* fix: add get_multiaddr_with_id step
- temporarily use local docker images
* fix: discard containers used for RLN registration
* fix: switch to use cluster ID 1 for RLN
* test: publish at slow and spam rate
* fix: shorten test data set
* fix: move RLN related code into separate class
* fix: use send only publish function
- add spam and alternate rate tests
* fix: use math.trunc instead of rounding
* fix: first message without delay
* fix: add one more second to messages with delay
* fix: add methods to setup non default RLN nodes
* fix: rewrite tests using steps rather than fixtures
- prepare for non default settings for RLN
* test: random epoch with valid_payloads_at_slow_rate
* test: random user message limit with valid payloads
* fix: skip test "random user message limit with valid payloads"
* fix: mark flaky "at variable_rate with valid payloads"
* fix: rename tests for easier debugging
* fix: mark valid_payloads_dynamic_at_slow_rate to skip
* fix: forgot to add actual file
* test: valid payloads dynamic(on chain) at spam rate
- extend timeout for ensure_ready() to 600s
- add ensure_healthy() for future use
- add text content based rest call
- remove NODE1, NODE2 imports
* fix: revert env_vars to source images from Harbor
* fix: reuse setup first and second rln relay node for setup_main_rln_relay_nodes
* fix: reuse register_rln_single_node for register_main_rln_relay_nodes
* fix: start using src.steps.common
- removed RLN test class inheritance from StepsRelay
* fix: test using whole data set at test payloads_at_slow_rate
* fix: switch to send msg and check for slow rate tests
* fix: add comment for skip check at first message
* fix: refactor payloads_at_variable_rate to use only one payload pattern
* fix: remove the plural from payloads_at_variable_rate
* fix: multiple class inheritance for TestRelayRLN
* test: node1 with rln node2 without rln at spam rate
* test: mixed epoch at slow rate
* test: add lightpush methods
* test: send valid payloads lightpush at spam rate
* fix: node1 to act as light push receiving node
- add setup lightpush node to spin off node2 with lightpush support
* fix: use NODE1 NODE2 instead of DEFAULT_NWAKU
* fix: no lightpush param required for plain RLN relay
* fix: comment for lightpush
* fix: comment for lightpush - wait for implementation
* fix: comment on chain tests
* fix: add lightpush case to publish_message
* fix: remove check_light_pushed_message_reaches_receiving_peer from StepsRLN
* fix: change comment for mixed_epoch_at_slow_rate
* test: happy and common case with 5 nodes
* fix: add all required fixtures explicitly
* fix: add timeout param to ensure_ready
* fix: skip RLN tests for go-waku
* fix: reformated with pre-commit
* fix: uncomment skip for debugging
* fix: put the skip back
* fix: change comment for on chain tests
* fix: run RLN tests in serial
- add grouping of tests to runner
- use smaller dataset for spam rate tests
* test: Nim to Nim workflow
* test: check also additional nodes for go-waku
* test: all nodes are nwaku
* fix: string quotes
* fix: remove additional nodes
* fix: re-arrange skip conditions
* test: RLN only
* fix: change default additional nodes to nwaku only
* fix: change additional nodes rather at top level workflow
* fix: enable all tests
* test: problems with current workdir
* test: rln only
* test: correct typo
* test: re-enable all tests
- remove current dir debug
* fix: nwaku additional nodes for nim to nim worklfow
* fix: re-able discord notification
- delete test workflow
* fix: add get_multiaddr_with_id step
- temporarily use local docker images
* fix: discard containers used for RLN registration
* fix: switch to use cluster ID 1 for RLN
* test: publish at slow and spam rate
* fix: shorten test data set
* fix: rebase onto master
* fix: use send only publish function
- add spam and alternate rate tests
* fix: use math.trunc instead of rounding
* fix: first message without delay
* fix: add one more second to messages with delay
* fix: add methods to setup non default RLN nodes
* fix: rewrite tests using steps rather than fixtures
- prepare for non default settings for RLN
* test: random epoch with valid_payloads_at_slow_rate
* test: random user message limit with valid payloads
* fix: skip test "random user message limit with valid payloads"
* fix: mark flaky "at variable_rate with valid payloads"
* fix: rename tests for easier debugging
* fix: mark valid_payloads_dynamic_at_slow_rate to skip
* fix: forgot to add actual file
* test: valid payloads dynamic(on chain) at spam rate
- extend timeout for ensure_ready() to 600s
- add ensure_healthy() for future use
- add text content based rest call
- remove NODE1, NODE2 imports
* fix: revert env_vars to source images from Harbor
* fix: reuse setup first and second rln relay node for setup_main_rln_relay_nodes
* fix: reuse register_rln_single_node for register_main_rln_relay_nodes
* fix: start using src.steps.common
- removed RLN test class inheritance from StepsRelay
* fix: test using whole data set at test payloads_at_slow_rate
* fix: switch to send msg and check for slow rate tests
* fix: add comment for skip check at first message
* fix: refactor payloads_at_variable_rate to use only one payload pattern
* fix: remove the plural from payloads_at_variable_rate
* fix: multiple class inheritance for TestRelayRLN
* test: node1 with rln node2 without rln at spam rate
* test: mixed epoch at slow rate
* test: add lightpush methods
* test: send valid payloads lightpush at spam rate
* fix: node1 to act as light push receiving node
- add setup lightpush node to spin off node2 with lightpush support
* fix: use NODE1 NODE2 instead of DEFAULT_NWAKU
* fix: no lightpush param required for plain RLN relay
* fix: comment for lightpush
* fix: comment for lightpush - wait for implementation
* fix: comment on chain tests
* fix: add lightpush case to publish_message
* fix: remove check_light_pushed_message_reaches_receiving_peer from StepsRLN
* fix: change comment for mixed_epoch_at_slow_rate
* test: happy and common case with 5 nodes
* fix: add all required fixtures explicitly
* fix: add timeout param to ensure_ready
* fix: skip RLN tests for go-waku
* fix: uncomment skip for debugging
* fix: put the skip back
* fix: change comment for on chain tests
* fix: run RLN tests in serial
- add grouping of tests to runner
- use smaller dataset for spam rate tests
* test: Nim to Nim workflow
* test: check also additional nodes for go-waku
* test: all nodes are nwaku
* fix: string quotes
* fix: remove additional nodes
* fix: re-arrange skip conditions
* test: RLN only
* fix: change default additional nodes to nwaku only
* fix: change additional nodes rather at top level workflow
* fix: enable all tests
* test: problems with current workdir
* test: rln only
* test: correct typo
* test: re-enable all tests
- remove current dir debug
* fix: nwaku additional nodes for nim to nim worklfow
* fix: re-able discord notification
- delete test workflow
* test: re-test again after rebase
* fix: wait longer for credential store
* test: try again with Discord report off
* fix: enable Discord
- delete test workflow
* first set of tests
* fix ci
* new tests
* finish publish tests
* new tests
* running nodes tests
* new tests
* finishing touches
* new test
* temp commit
* running node tests
* new tests
* new store tests
* store part 1
* first set of tests
* fix ci
* new tests
* finish publish tests
* new tests
* running nodes tests
* new tests
* finishing touches
* new test
* fixes
* fixes
* chore: parameters and volumes for RLN relay
* chore: add startup test for RLN
* fix: remove redundant rln_enabled from WakuNode
* fix: - and _ magic in rln parameters
* fix: key 'eth_testnet_key' -> 'eth_client_private_key'
* fix: rln-register_only -> rln-register-only
* fix: use extend instead of append for the volumes list
* fix: use absolute path for the volumes names
- mark volumes shared across containers
* fix: remove :z attr from volumes
* fix: remove filename from volume path
* fix: remove request for ENR
* test: plain RLN registration
* fix: remove subscribe
* fix: remove ENR related params
* test: add run_container func to Docker Mananger
* fix: remove run_container func from Docker Mananger - no need for exec
* fix: pass exec commands instead of specialized docker exec func
* fix: exclude RLN arguments from others
* fix: separate RLN volumes by implementation
* test: registration with nwaku
* test: registration over existing credentials
* test: add RLN Relay node startup
* test: RLN credentials reuse for relay node startup
* fix: clean up unnecessary commands
* fix: clean up unnecessary commands for non RLN relay too
* test: regression by sending one valid message
* fix: add forgotten call to get enr_uri
* fix: check RLN credentials set properly
* fix: parenthesis in eval expression
* fix: better check for RLN credentials
* fix: update to new flags - gowaku
- separate private key for go/nwaku
* test: register RLN
* fix: RLN credentials check
* fix: remove enable rln-relay flag from registration
* test: reorder commands to check go-waku registration
* fix: restructure if statements for RLN registration
* fix: different set of flag for RLN registration and operation
* fix: forgotten "eth" in eth-contract-address
* fix: remove redundant None from get_env_var call
* fix: refactor rln credentials parsing from start function
* fix: missed second return value
* test: call to parse_rln_credentials
* fix: remove redundant self in call to parse_rln_credentials
* fix: remove rln related values if not valid
* fix: refactored to accept multiple private keys
- JSON source for RLN credentials
- removed go-waku support for RLN
* test: register RLN with 2 nwaku nodes
* fix: missing open file, key errors
* fix: return effective keystore_path
* fix: cleanup unused env variables
* fix: cleanup unused env variables from relay
* fix: wait longer for credentials file to be written to disk
* test: remove waiting for credentials file to be written to disk
* fix: add select_private_key()
* fix: merge parse_rln_credentials and parse_rln_registration_credentials
* test: wait for filesystem cache
* test: try with os.sync to flush cache
* test: stop container to clear cache
* fix: 15 sec wait + stop container to clear cache
* test: RLN registration test with fixture and cred file check
* test: added allure.step - RLN registration for single node
- corresponding test to register all keys
* fix: f-strings in the test
* fix: sync naming for register_main_rln_relay_nodes
* fix: add WARN message to log unset and expected RLN credentials
* fix: pytest.skip added to exit tests when non nwaku image is used
* fix: swap NODE2 for DEFAULT_NWAKU
* fix: let rln_credential_store_ready to raise exception for retry
* fix: let register_rln to raise exception too, when credential fine still not available
* fix: remove container stop
* fix: tune down retry timeouts
* fix: remove unnecessary f-string
* test: reduce unnecessary variables init
* test: undo reduce unnecessary variables init
* test: increase timeout for rln_credential_store_ready
* test: refactor kwargs handling into sanitize_docker_flags
* fix: created RLN registration check
- changed rln_credential_store_ready to function
* fix: delete unnecessary ports from register_rln init
* fix: remove wait for registration entirely
* test: RLN_CREDENTIALS env var example
* fix: check_rln_registration to raise exception
* fix: use f-string at check_rln_registration
* fix: add gen_step_id function
* fix: RLN_CREDENTIALS as loaded from .env
* fix: RLN_CREDENTIALS example, skipping test if not set
* test: RLN with actions
* fix: tune up RLN timeouts for Github runners
* test: filesystem write to /
* fix: change RLN data to be stored at working directory
* fix: catch exception instead of "if not"
- print out container log
* fix: wrap logs into debug msg
* fix: print log file
* fix: remove additional logging
* fix: exit RLN cred parsing sooner when not used
- delete proper keys from default_args
* fix: Allure report
* fix: Discord notifications
* fix: remove f-string
* fix: delete test workflow
* run go waku as a client only
* notify nwaku devs when stuff fails
* revert name
* revert name
* use role id
* add my user id
* remove role id
* prepare for PR
* address failures
* job for interop tests
* fix branch name
* fix remaining tests
* see job name
* set caller input
* split reports per caller
* trigger again
* try with publish_dir
* small fix
* small fix
* remove on pr
* chore: separate interop test workflows for Go and Nim
- common test workflow
- reporting to Discord
* fix: define GITHUB_STEP_SUMMARY
* fix: remove GITHUB_STEP_SUMMARY def for global env
* fix: move GITHUB_STEP_SUMMARY after run
* fix: add dollar sign to GITHUB_STEP_SUMMARY
* fix: proper quoting - GITHUB_STEP_SUMMARY
* fix: unique concurrency groups
* fix: variable expansion for curl
* fix: variable substitution
* fix: use Discord action instead of curl
* fix: use GITHUB_OUTPUT
* fix: remove doubled echo
* fix: secrets inherit
* test: directly refer to step summary
* test: GITHUB_STEP_SUMMARY behavior
* fix: syntax
* fix: syntax 2
* test: cat content of backing file
* test: re-run with tests
* fix: error in text format
* fix: error in text format 2
* fix: error in text format 3
* fix: error in text format 4
* fix: error in text format 5
* test: env variable passing
* test: re-run with tests
* test: override description info
* fix: set different schedule for Nim and Go tests
- print job.status
* fix: adjust wording for job.status
* fix: add event and actor info
* fix: add color based on result
* fix: remove redundant dash
* test: logical expression for color
* fix: forgotten dollar
* test: re-rerun with tests
* fix: remove on push trigger
fbarbu15
dependabot[bot]
Roman Zajic