* test: node startup time for valid_payloads_dynamic_at_slow_rate
* fix: remove timing debug info
* fix: reuse existing keystore file
* fix: remove skip marks for PR2612
* fix: remove skip marks for Issue 2837
* test: change valid_payloads_at_slow_rate to send 102 messages
* fix: remove existing keystore before new registration
* test: magical 20 messages
* fix: omit RLN params for static mode
- update test_valid_payloads_at_slow_rate
- update test_valid_payloads_at_spam_rate
* fix: condition check for rln-relay-dynamic
* fix: update static tests
- update test_valid_payloads_dynamic_at_slow_rate
* fix: add rln-relay-user-message-limit to registration
* fix: on-chain tests
* fix: valid_payloads_n1_with_rln_n2_without_rln_at_spam_rate
* fix: rename lrn method for lightpush setup
- delete test_valid_payloads_mixed_epoch_at_slow_rate
* fix: test_valid_payloads_lightpush_at_spam_rate
* fix: run registration only when necessary
* fix: reorder tests - lightpush first
- test workflow
* fix: use touch instead of unlink
* test: single test only test_valid_payloads_lightpush_at_spam_rate
* test: run 2 tests
* fix: remove reporting part from test workflow
* fix: all tests
* fix: use rmtree on keystore dir_path
* fix: use external rm
* fix: enable all RLN tests
* fix: further optimize number or registrations
* test: single on chain test
* test: two on chain tests
* test: swap order of tests
* test: reduce test logging and output docker log
* fix: rewrite keystore path related logic
* fix: use cache for keystore prefixes
* fix: index in setup_optional_rln_relay_nodes
* fix: delete test workflows
- revert env_vars
* fix: use cluster_id 0 for peer store related tests
* test: simulation for issue
* fix: use cluster_id not 0 and subscribe to static shard for go-waku
* fix: revert env values to original defaults
* test: establish basic node setup for pe
* test: debug peer retrieval error with nwaku
* fix: disable discovery v5 on the requester node
* fix: assert node3 peer store to exact content
* test: get peers for filter node
* test: get peers after node1 was restarted
* fix: allow tests to run only when Node2 is Go-waku
* fix: revert NODE_1 to its original default
* test: get peers from peer store
* test: add peers to peer store
* fix: add go_waku support
* test: placeholder for Issue 1549 solution test
* test: expect two peers for two protocols/services
* test: restart survival with persistent peer store
* fix: add issue to skip mark
* fix: move Waku related methods to waku_node module
* test: full peer store takeover
* fix: add kill of Node 1
* fix: remove debug info
- skip while waiting on issue 2792
* test: peer store content after node restart
* fix: revert nwaku image back to use latest
* fix: added delays to let nodes finish discovery
* fix: move peer_persistence config steps out of start
* fix: NODE1 default back to DEFAULT_GOWAKU
* fix: partial refactor for setup_first-second_relay_node
* test: daily workflow after refactor
* test: shorter name for daily workflow
* test: RLN only
* test: increase timeout
* test: check Sepolia API endpoint
* test: run RLN tests in single thread
* fix: remove Sepolia API check
* fix: skipp all RLN tests till registration works
* fix: remove test workflow
* first commit
* get message tests 1
* store tests with node restarts
* reliability tests
* store tests
* fixes
* more tests
* fixes
* new store tests
* new store tests
* adjustments
* adjust tests for go-waku
* postgress test
* postgress test
* fixes
* small fixes
* reliability updates
* postgress test
* adjsutmens for go-waku
* test: wait longer for info endpoint to start
* test: health endpoint response parsing
* fix: health endpoint response parsing
* fix: remove debug from health response parsing
* fix: mark on chain tests to skip again
* fix: check_healthy accepts both text and json response
* fix: delete test workflow
* fix: simplify if statements
* fix: add get_multiaddr_with_id step
- temporarily use local docker images
* fix: discard containers used for RLN registration
* fix: switch to use cluster ID 1 for RLN
* test: publish at slow and spam rate
* fix: shorten test data set
* fix: move RLN related code into separate class
* fix: use send only publish function
- add spam and alternate rate tests
* fix: use math.trunc instead of rounding
* fix: first message without delay
* fix: add one more second to messages with delay
* fix: add methods to setup non default RLN nodes
* fix: rewrite tests using steps rather than fixtures
- prepare for non default settings for RLN
* test: random epoch with valid_payloads_at_slow_rate
* test: random user message limit with valid payloads
* fix: skip test "random user message limit with valid payloads"
* fix: mark flaky "at variable_rate with valid payloads"
* fix: rename tests for easier debugging
* fix: mark valid_payloads_dynamic_at_slow_rate to skip
* fix: forgot to add actual file
* test: valid payloads dynamic(on chain) at spam rate
- extend timeout for ensure_ready() to 600s
- add ensure_healthy() for future use
- add text content based rest call
- remove NODE1, NODE2 imports
* fix: revert env_vars to source images from Harbor
* fix: reuse setup first and second rln relay node for setup_main_rln_relay_nodes
* fix: reuse register_rln_single_node for register_main_rln_relay_nodes
* fix: start using src.steps.common
- removed RLN test class inheritance from StepsRelay
* fix: test using whole data set at test payloads_at_slow_rate
* fix: switch to send msg and check for slow rate tests
* fix: add comment for skip check at first message
* fix: refactor payloads_at_variable_rate to use only one payload pattern
* fix: remove the plural from payloads_at_variable_rate
* fix: multiple class inheritance for TestRelayRLN
* test: node1 with rln node2 without rln at spam rate
* test: mixed epoch at slow rate
* test: add lightpush methods
* test: send valid payloads lightpush at spam rate
* fix: node1 to act as light push receiving node
- add setup lightpush node to spin off node2 with lightpush support
* fix: use NODE1 NODE2 instead of DEFAULT_NWAKU
* fix: no lightpush param required for plain RLN relay
* fix: comment for lightpush
* fix: comment for lightpush - wait for implementation
* fix: comment on chain tests
* fix: add lightpush case to publish_message
* fix: remove check_light_pushed_message_reaches_receiving_peer from StepsRLN
* fix: change comment for mixed_epoch_at_slow_rate
* test: happy and common case with 5 nodes
* fix: add all required fixtures explicitly
* fix: add timeout param to ensure_ready
* fix: skip RLN tests for go-waku
* fix: reformated with pre-commit
* fix: uncomment skip for debugging
* fix: put the skip back
* fix: change comment for on chain tests
* fix: run RLN tests in serial
- add grouping of tests to runner
- use smaller dataset for spam rate tests
* test: Nim to Nim workflow
* test: check also additional nodes for go-waku
* test: all nodes are nwaku
* fix: string quotes
* fix: remove additional nodes
* fix: re-arrange skip conditions
* test: RLN only
* fix: change default additional nodes to nwaku only
* fix: change additional nodes rather at top level workflow
* fix: enable all tests
* test: problems with current workdir
* test: rln only
* test: correct typo
* test: re-enable all tests
- remove current dir debug
* fix: nwaku additional nodes for nim to nim worklfow
* fix: re-able discord notification
- delete test workflow
* fix: add get_multiaddr_with_id step
- temporarily use local docker images
* fix: discard containers used for RLN registration
* fix: switch to use cluster ID 1 for RLN
* test: publish at slow and spam rate
* fix: shorten test data set
* fix: rebase onto master
* fix: use send only publish function
- add spam and alternate rate tests
* fix: use math.trunc instead of rounding
* fix: first message without delay
* fix: add one more second to messages with delay
* fix: add methods to setup non default RLN nodes
* fix: rewrite tests using steps rather than fixtures
- prepare for non default settings for RLN
* test: random epoch with valid_payloads_at_slow_rate
* test: random user message limit with valid payloads
* fix: skip test "random user message limit with valid payloads"
* fix: mark flaky "at variable_rate with valid payloads"
* fix: rename tests for easier debugging
* fix: mark valid_payloads_dynamic_at_slow_rate to skip
* fix: forgot to add actual file
* test: valid payloads dynamic(on chain) at spam rate
- extend timeout for ensure_ready() to 600s
- add ensure_healthy() for future use
- add text content based rest call
- remove NODE1, NODE2 imports
* fix: revert env_vars to source images from Harbor
* fix: reuse setup first and second rln relay node for setup_main_rln_relay_nodes
* fix: reuse register_rln_single_node for register_main_rln_relay_nodes
* fix: start using src.steps.common
- removed RLN test class inheritance from StepsRelay
* fix: test using whole data set at test payloads_at_slow_rate
* fix: switch to send msg and check for slow rate tests
* fix: add comment for skip check at first message
* fix: refactor payloads_at_variable_rate to use only one payload pattern
* fix: remove the plural from payloads_at_variable_rate
* fix: multiple class inheritance for TestRelayRLN
* test: node1 with rln node2 without rln at spam rate
* test: mixed epoch at slow rate
* test: add lightpush methods
* test: send valid payloads lightpush at spam rate
* fix: node1 to act as light push receiving node
- add setup lightpush node to spin off node2 with lightpush support
* fix: use NODE1 NODE2 instead of DEFAULT_NWAKU
* fix: no lightpush param required for plain RLN relay
* fix: comment for lightpush
* fix: comment for lightpush - wait for implementation
* fix: comment on chain tests
* fix: add lightpush case to publish_message
* fix: remove check_light_pushed_message_reaches_receiving_peer from StepsRLN
* fix: change comment for mixed_epoch_at_slow_rate
* test: happy and common case with 5 nodes
* fix: add all required fixtures explicitly
* fix: add timeout param to ensure_ready
* fix: skip RLN tests for go-waku
* fix: uncomment skip for debugging
* fix: put the skip back
* fix: change comment for on chain tests
* fix: run RLN tests in serial
- add grouping of tests to runner
- use smaller dataset for spam rate tests
* test: Nim to Nim workflow
* test: check also additional nodes for go-waku
* test: all nodes are nwaku
* fix: string quotes
* fix: remove additional nodes
* fix: re-arrange skip conditions
* test: RLN only
* fix: change default additional nodes to nwaku only
* fix: change additional nodes rather at top level workflow
* fix: enable all tests
* test: problems with current workdir
* test: rln only
* test: correct typo
* test: re-enable all tests
- remove current dir debug
* fix: nwaku additional nodes for nim to nim worklfow
* fix: re-able discord notification
- delete test workflow
* test: re-test again after rebase
* fix: wait longer for credential store
* test: try again with Discord report off
* fix: enable Discord
- delete test workflow
* first set of tests
* fix ci
* new tests
* finish publish tests
* new tests
* running nodes tests
* new tests
* finishing touches
* new test
* temp commit
* running node tests
* new tests
* new store tests
* store part 1
* first set of tests
* fix ci
* new tests
* finish publish tests
* new tests
* running nodes tests
* new tests
* finishing touches
* new test
* fixes
* fixes
fbarbu15
Roman Zajic
dependabot[bot]