1. Fix `EmptyShapeRectangleFooterListView` visibility and positioning after ListView items are animated out of view
2. Update `ShowcaseDelegate` to remove modelObject dependency. The UI properties needed will be received from parent
3. Update `ProfileShowcasePanel` to remove the previous logic involving rows move and visibility change. There is no need now for two specialised delegate components (one for in showcase and one for hidden). The delegate is still configured outside of this component because the model rolenames need to be mapped to the delegate properties. The common delegate logic is implemented in the `ProfileShowcasePanel` and only the model mapping is needed from parent component.
3. Update all `ProfileShowcase*Panel` to impement the new API
4. Remove all `*ShowcaseDelegate`. The delegate is simple enough to be configured at once in the Panel
Manual calculation of bubble postion to be correctly centered due to the usage of `SettingsContentBase` as a centralPanel component that already has a default left margin value.
- Added `autoscrollWhenDirty` property to be able to configure the settings content base as autoscroll mode when dirty toast appears. Otherwise, the toast will be shown overlaid on top of the view content.
- Updated profile view to setup autoscroll on `Identity` tab. Rest of app cases are setup with the overlay mode.
Closes#13517
- Updated `AddSocialLinkModal` according to new design.
- Modified main social links items according to new design.
- Updated edit modal according to new design.
- Some text validation updates.
Closes#13511
- Send/request ID verification
- Reply to incoming ID request
- Review ID verification reply
- adjust SB and add shortcuts to trigger the various states of the ID
verification flows
Fixes#13709Fixes#13745Fixes#13747
- It adds an additional right component to `FoldableHeader.qml`.
- It adds hidden button component in `hidden` foldable header.
- It adds visibility buttons component in `in showcase` foldable header.
Closes#13595
- TLDR: we were scaling twice, resulting in ginourmous pixel values
The long story:
- since Qt treats the various scale factors in a multiplicative way (see
https://www.qt.io/blog/2016/01/26/high-dpi-support-in-qt-5-6 for
explanation) and there's no way to get the screen's baseline scale
factor programatically, we also have to export `QT_SCREEN_SCALE_FACTORS`
to something that's not equal to `0` or `1` to force the monitor scale
factor to `100%` and then compensate for it when exporting our own scale
value using `QT_SCALE_FACTOR`
- make the UI slider values go in `25%` steps, allowing for more fine
grained control; with `100%` we fallback to the Qt's native handling of
highdpi
- raised the maximum to `300%` since on highres displays, one wouldn't
be able to go over the implicit maximum of `200%` (due to the internal
scaling being 2x)
- scale our main window's minimum width/height so that we don't overflow
the monitor's available space
- modernize the `ConfirmAppRestartModal` to use `StatusDialog`
- use the new `Utils.restartApplication()` when changing the UI language
as well
- remove some dead code
In the (very) long term, we should take a different approach of scaling
our app independently of Qt, just taking the monitor
`Screen.devicePixelRatio` into account, similar to what other apps like
Telegram do
Fixes#13484
- Created `ProfileShowcaseInfoPopup` component.
- Added storybook support for the new popup component.
- Added new popup into the application flow.
- New property stored in local account settings file.
Closes#13338
- Added `FastBlur` component to `ShowcaseDelegate` and added property to change to blur state.
- Updated `ProfileShowcasePanel` to activate blur delegate state when dragging.
Closes#13594
- It updates `ProfileShowcasePanel` with new drop area design adding shadows, changing drop areas design and sizes.
- It adjusts `ShowcaseDelegate` according to design, ie: heigh and background colour on dragActive.
Closes#13509
- Added new additional footer component in `EmptyShapeRectangleFooterListView`.
- Enabled more accounts component in profile showcase assets and collectibles panel.
Closes#13590
- Modified `ProfileShowcasePanel` with 2 foldable sections.
- Modified api of `ProfileShowcaseCommunitiesPanel` with the new base component.
- Modified api of `ProfileShowcaseAccountsPanel` with the new base component.
- Modified api of `ProfileShowcaseAssetsPanel` and `ProfileShowcaseCollectiblesPanel` with the new base component.
- Added needed `storybook` support.
Closes of #13504
- make `SendContactRequestModal.qml` use the common dialog, use the
contact details if we already have it
- make some minimal changes to the "Send ID verification" flow since it
shares the same dialog
- simplify the `CommonContactDialog.qml` footer/buttons handling
- adjust the menu item texts
- emit toasts when the action is performed
- display a tooltip over the compressed elided key
Fixes#13518
- introduce a shared `CommonContactDialog.qml` component, to be used in
all profile/contact related flows
- make `NicknamePopup.qml` use the common dialog
- adjust the menu item text and add a new "Remove nickname" item
- remove unused `DisplayNamePopup.qml`
- emit toasts when the nickname changes
Fixes#13513
- fix the QR code to generate a URL with the link to the profile instead
of just the user key
- reuse the `UserImage` component and place it on top of the existing QR
code
- put a white rectangle behind the QR code image and white ring around
the user image
Fixes#13482
- Fixed spacing between `Token lists` title and list items.
- Fixed spacing between list items and `add more` box.
- Fixed highlight item when hovering `View` button.
Closes #13395
- Created new reusable component to navigate to accounts tab form collectibles / assets tab.
- Added needed support in `storybook` to cover the new use case.
Closes#13340
- Replaced current `StatusButton` type to `DisabledTootipButton` to allow tooltip displayed when disabled in dirty toast message.
- Added needed conditions in `MyProfileView` where the tooltip when the save changes is disabled.
Closes#13334
- create new `ShareProfileDialog` with QR code + links
- align the context menu items with latest Figma designs
- add `isBlocked` to contact icons
- adjust SB to show more options and showcase models
Fixes#13416Fixes#13417
- restored dirty tracking for Identity; showcase is handled by the NIM
backend atm
- StatusSectionLayout: make the right panel width configurable and clean
the docu
Fixes#13331
- Each section of the current profile settings view is moved into the
corresponding tab
- The Preview tab becomes the Preview button
- Password button becomes a separate page: PR: [Settings]: Added change
password view #13284 (I kept the Change password button for now until
this is merged)
- Also creates the new Web (Social links) tab as a result
Fixes#13330Fixes#13406
- unify the signature of the method to `move(from, to, count)` so that
both ListModel and NIM have it the same
- realize the move operation using the proper `begin/endMoveRows`
instead of doing a full model reset
- simplify signaling `dataChanged()` for all model roles (nimqml now
follows the C++ impl)
Fixes#13329
* chore: bump status-go
Closes#13139
* fix(settings): It's not possible to switch the log level
Previously it was not possible to change the state of the Debug toggle.
This is because the code forced the setting the default value, ignoring
the database setup, hence always setting the DEBUG as LogLevel.
Closes#13139
- reduce the duplication by moving the controllers (1 per type) to the
toplevel stores
- make sure the internal properties stay in sync between save/load now
that we have just 1 common controller
- fix navigating to the Hidden section from the toast
- finish impl of hiding the token from FirstTokenReceivedPopup
put the respective controller instances into WalletAssetsStore and
CollectiblesStore, so that they can be accessed from other places, like
the SendModal or some popups
Iterates #13293
It provides visual alignments to the current design and also
significantly improves performance because ListView components
are not "unrolled" causing instantiation of too many delegates.
Closes: #12703Closes: #13043
- add new Hidden tab/section to Settings/Wallet/Manage tokens page and
storybook
- extract the controller(s) to ManageTokensView.qml to share them across
the tabs
- updated the grouped UI delegate
- adjust the tests
Fixes#13201Fixes#13188
* feat(ProfileShowcase): Show token balences in the profile showcase
* feat: support new tokens & collectible identification
* feat: add collectibles to profile showcase preferences
* feat: dispaly collectibles for a contact
* fix: review fixes & tokens code moved to separated PR
Show Qr popup is partially refactored because of the two things:
- to meet new UI requirements (introduced in the new saved addresses design)
- to make usage of that popup more generic, that it can be easily used from different places
... under Settings/Wallet/Manage Tokens
- rename Tokens List tab to Advanced tab
- introduce a new `CurrencyAmountInput` component, backed by
`FormattedDoubleProperty` C++ class (plus the respective SB page)
- use `FastExpressionFoo` for the collectibles views as well
Fixes#12611Fixes#13040
The chain we're using for stickers, collectibles, ens names and other similar activities
is simply determined by the mode the Status app is operating in and it could be either
mainnet or testnet mode. Having that fact in mind we don't need all the calls we were
using in the past for fetching explicitly chain id for each of the sections mentioned above
and that's simplified with these changes.
- add the sort combobox to assets/collectibles main wallet view pages
- preserve the current view settings
- add the possibility to navigate/drill down into wallet settings
(sub)subsection
- some other minor changes/fixes
Note: currently assets can't be sorted by "1W change" and collectibles
by "Date added" due to missing backend for these
Fixes#12517Fixes#12518
turns out the model from the comminitiesModule doesn't contain the
members; use the sectionModel (as in all other places) instead which
already has the correct info
additionally, fix the InviteFriendsToCommunityPopup display, it appeared
empty all the time
Fixes#12967
- update the AssetsView.qml view and delegates according to the latest
design
- add AssetsView to Storybook
- add new section for Community Assets
- (re)use the community badge with tooltip and link action to take the
user to the respective community
- add Community Assets info icon + popup
- create context menu for token delegates with actions
(Send/Receive/Manage tokens/Hide)
- add confirmation popups when hiding a single or all community tokens
- emit a toast bubble after hiding the token(s)
- plus related controller/backend methods for handling the
settings-related actions
- some smaller fixes/cleanups
Fixes#12369Fixes#12372
This is required to control the resource consumption in case of no
usage of wallet connect
Hence we load the WebEngineView only if we have active pairings and
such that SDK events are expected from the paired dapps.
Also:
- Moved the generic WebEngineView communication bridge to StatusQ
- Added basic tests for WebEngineLoader
- Add a way to know when wallet is loaded (`walletReady`)
- Add storybook support for mock of nim sections as context properties
Updates: #12639
- display a customized floating bubble to save/apply the settings
- display a toast message on Apply with an action to jump to Wallet main
page
- add home/end/pgup/pgdown keyboard shortcuts to StatusScrollView to be
able to navigate more easily in long list views
- some smaller fixes and cleanups in wallet and settings related views
Fixes https://github.com/status-im/status-desktop/issues/12762
Implement Controller to forward requests between status-go and SDK
implementation in QML.
Other changes:
- Source Wallet Connect projectId from env vars
- Mock controller in storybook
Updates #12551
- implements the UI component to manage regular & community tokens
(drag'n'drop or context menu to reorder, show/hide, group by community)
- implements a custom C++ QAIM model which acts as a fake proxy model
for the above QML panel (internally it does all the
sorting/grouping/hiding and preserves the custom sort order)
- adds and corrects support for cascading submenus in StatusAction, and
StatusMenu[Item]
- adds support for mirrored (horizontally flipped) StatusSwitch
- adds a new SortOrderComboBox.qml (this was being used in the first
Figma version, can be ignored now, will be used by the main wallet view
later)
- some minor fixes and cleanups in the used components
Iterates #12377Closes#12587
* feat(Profile): simplified approach to reuse existing models with profile
* feat(Profile): adapt nim models for view actions (move and change visibility)
* feat(Profile): save profile showcasse model changes to the db
* feat(Profile): update profile showcase models on changes from status-go
* feat(Profile): Various bug fixes for profile showcase
* fix(Profile): Fixes storing profile order and review fixes
* chore(Profile): Rename and minimise signals for updating base model filters
It creates new `TokensStore` that will provide all needed token models for all app sections:
- sourcesOfTokensModel
- flatTokensModel
- tokensBySymbolModel
- It creates new component `SupportedTokensListsPanel`.
- It updates tokens list tab content with the expected one.
- It creates new component `TokenListPopup`.
- It adds support to new created components in `storybook`.
Closes#12374