- set the correct widths and elide mode
- fixup the visuals of the NetworkFilter combo box (to disable it w/o
making it look disabled)
- fix passing the connection status down to DAppCard
- This commit temporarily disables the MaxAmount button in the `SwapInputPanel` and `SendModal` components.
- The MaxAmount button will be reintroduced with the correct behavior in issue #15709 for the 2.31 release.
closes: #15710
The static url validation state `Pairing.errors.ok` was directly
responsible for the validation action in UX. With current change
the validation is now based on the pairing response. When the
pairing response is received the UX is validated and after half second
UX is moved to the approval process (`ConnectedDAppModal`)
Closes: #15591
We have no easy way to check the protocol and provide a customized
error message. Therefore we generalizes the error message to network
not supported.
Closes: #15649
- when we arrive to a point when all input params are empty, disable the
middle Exchange button
- add QML test for the Exchange button enabled/disabled state
Fixes#15751
Add helper function to filter out dApps with sessions that don't
have any supported account in the available accounts list.
Use helper function to filter out dApps connected on other profiles
when listing dApps in the dApps list.
When disconnecting an app only disconnect sessions for the current
profile.
Closes: #14888, #15707
Also
- don't report error in case of status-go returning nil instead
of an empty array.
- fix misleading alias to AmountsArithmetic
- minor improvements requested in previous discussions
Updates: #15707
Also differentiate between l1 and l2 fees and check them against the
specific chain balance
Also
- Included tests for the new functionality
- Fixed some inconsistencies in handling types
Updates: #15552
Fixes#15507
Makes sure to enable the network where the owner token was minted before minting or airdroping a token.
This makes sure that the account selector shows the right balance and there is no ETH error before doing the transation
fix#15179 that triggers connection request from client
- Setup the initial architecture for connecting Status-go and UI
screens
- Implement the request Connection popup for Accept or Rejecting
connection
Fixing a bug where the community name is not shown in the `Send` button
Get the collectible community name from the community model for community tokens. Otherwise default to community id.
+ Fix WalletFooter layout when the buttons text exceeds the available width
to squash: Fixing send on owner token - name
1. Show Send Button on wallet footer when all accounts is selected
2. Hide Send Button in collectibles context menu and collectibles details view when the collectible is not owned by the user
3. Disable the Send Button in collectibles context menu and collectibles details view when the collectible is soulbound
to squash: Fine tune send action on collectibles
to squash: Fine tune send on collectibles
to squash: Fine-tune collectibles
Updating the SendModal to receive an accountAddress to preselect the account instead of the account item model
to squash: Fix account selection. by address
The root cause of this issue is the improper computation of the `accountBalance` expression role in the accounts model. Its value depends on another model (`filteredBalancesModel`) and by the time the expression role gets computed the proper `balance ` is not ready in the `filteredBalancesModel`.
This is a quick fix, but maybe the real fix should be restructuring the adapter and the model dependencies. I'd look out for any `ModelUtils` usage and replace it with a declarative approach if possible.
Replace missing methods calls of chart after it was replaced with a different
component.
Update chart on networks change.
Fix data for all chains requested - both test and real networks.
Fix some unrelated qml errors
Compute max fees for transaction related requests and display the
results to user.
Also:
- Add helper to convert from hex (backend) to decimal (frontend) values.
- Add helper to convert from float gwei to hex wei
- Update tests to accommodate for the new dependencies.
Sourcing of account balances is not included therefore the transaction is
allowed to go through even if the account balance is insufficient. An error
will be generated by the backend in this case.
Updates: #15192
Fixes#15614
* feat(StatusQ): add StatusExperimentalTag component and page
* chore(beta): add beta tag to ENS
* chore(beta): add beta tag to Activity tab
* chore(beta): add beta tag to wallet settings
* chore(beta): add beta tag to Notification Center
- remove old popup and related components/adaptors
- simplify the API of the Sign/Approve modals to take pre-formatted
amounts as strings
- correct login/auth icon
- SB: make it possible to open the new secondary modals
- SB: fix the `fetchSuggestedRoutes` response handling, pass around the
`uuid` and inject it to the mocked suggested routes
- adjust SB pages and tests
Fixes#15443
Implemented using the fees from the transaction data sent
by the dApp.
Also fixed the nim status go wrapper to send proper formatted
string as expected on the other side.
Updates: #15192
* feat(WalletConnect): Implement sign request modal
1. Implementing sign request modal based on SignTransactionModalBase
2. Adding storybook page
3. Integrate it in the app
4. Removing DAppRequestModal
5. Update RoundImageWithBadge to preserve aspect ratio between badge and main image
* fix(WalletConnect): Remove unneeded properties from WalletConnectService API
Removing `selectedAccountAddress` and `loginType`. These properties are now passed through DAppsWorkflow API
* fix(WalletConnect): Removing unnecessary changes
* fix(sharedAddress): hide non fully imported accounts from shared address
Fixes#15471
We only filtered out watch only accounts, but we also need to make sure it was a fully imported account, ie an account that is usable, hence why using `canSend`. It is the same property they use in the SendTransaction modal
- Created data transformation file called `WalletAccountsAdaptor` for `SendModal`. Now it contains the owned wallet accounts model data transformations.
- Added common formatting method for short chain ids to some utils and partially removed backend dependency.
- Component name changed to be more precise with what it represents.
- Removed `RootStore` dependency from `Helpers.qml`.
- Removed unnecessary method `lookupAddressObject` from `RootStore`.
- Updated `SendModal` property bindings related to recipient.
- Some activity controller interaction details moved to transactions store instead of being directly in `SendModal`.
- Type enum living in `RecipientSelectorPanel` is moved to `Helpers`. Since it doesn't depends on the specific component and it's used in other global places.
Part of #15208
Found out while testing that in some corner cases there will be no
response of error in case of pairing. This is handled now by showing
a generic error message. The implementation is using a timer to handle
this case.
Extend the logic to report errors in the pairing process.
Closes#14676
Extend support for legacy `eth_sign` and `eth_signTypedData`
methods.
Keep the `eth_sign` using the legacy method for compatibility
Use the newly added status-go apis for a safer implementation
of signing typed data by providing chain validation.
Closes: #15361
Changes:
1. Align dialog with Figma design
2. Add new components for round image with badge and connection status tag
3. Add tests
4. Dapps service will now receive wallet `RootStore` as input and reuse existing models with account balance and other necessary info for account selection and chain selection
5. Minor updates in stores
6. Minor updates in WC toast messages to display app domain instead of app url
- create a common base for "sign" transaction popups/modals:
`SignTransactionModalBase`
- add SwapSignModal, deriving from the above common modal base
- add it to StoryBook; integration TBD as part of a different followup
PR
- add QML tests
Fixes#14785
- Disable 'Sort by Date' when timestamps are incomplete.
- Default to 'Alphabetical' sort if date is unavailable.
fixes: #13630
Update status-go submodule to latest commit on develop
Added an optional 'isDisabled' property to the ComboBox model to dynamically control the visibility and interaction of entries based on their state. This enhancement allows for entries to be disabled under certain conditions, improving the UI's adaptability and user interaction.
fixes: #13630
- Added a manual reload button to the WalletHeader to allow users to refresh wallet data on demand.
- Implemented a throttle timer to prevent excessive reloads.
- Show the last reload time.
- Updated UI elements to reflect the reloading state for user feedback.
- Connected the reload button to the backend to trigger the wallet reload functionality.
resolves: #13652
Uses status-go's endpoints:
- `wallet_buildTransactions` to format the transaction
- `wallet_signMessage` to sign the transaction
- `wallet_buildRawTransaction` to format the final signed transaction
Updates #15126
- create new dedicated (asset) token selector component
- integrate it into `SwapInputPanel` and `SwapModal`
- add respective SB page and QML tests suite
Fixes#14783
This commit creates a new component NetworkSelectorView and it's implementation will replace the NetworkSelectionView
+ Adding the storybook page
+ Adding tests
This is the first step in refactoring the NetworkFilter, by cleaning the base component that handles the check states.
This component supports multiple configurations:
1. Single selection with or without radio button
2. Multiple selection with or without checkbox
3. Automatic handling of the check state. The component will change the check state based on user clicks
4. Manual handling of the check state. The component will not change the check state, but offers a toggled signal and expects the user to change the check state based on external flows
+ Fix minor bugs
The new account selector expects a generic account model. It will display all the account data if provided, including preferred chains, balance or asset balance. Otherwise it will display only the available data.
The account selector can receive an initial selection based on account address and will provide the current selected address and the current selected model item.
- Unify the account selector between communities and wallet
- Update the account selector to work with addresses instead of model indexes
- Adapt all components using the account selector or the account selection
- Move/reuse qml components involved in the account selector UI
- Remove nim logic used to handle index based account selection.
- Adding storybook page
TLDR: later this should form a basic building block for a new
TokenSelector picker component, potentially replacing the current
HoldingSelector* and TokenListView components (support for collectibles
TBD as part of https://github.com/status-im/status-desktop/issues/15121)
- create reusable `TokenSelectorAssetDelegate` and `TokenSelectorView`
- add corresponding SB page, showcasing the flow/integration and the
separation of concerns between the view, adaptor and delegate layers
- add QML testcase for TokenSelectorView
- don't display crypto symbol for token balances per chain tags
- update the stores and SB pages
- add some missing formatter functions to LocaleUtils and CurrenciesStore
Fixes#14716
Implement infrastructure and integration with status-go to support
general session requests
Supported methods:
- personal_sign
- eth_signTypedData_v4
depends on status-go change that exposes the signing methods
Also
- support hex or utf8 encoding for personal_sign
- format the typed data for display in the modal
Tests are disabled for now, as they are crashing on CI
Close: #14927
Trigger authentication with identity of the request
Track the authentication using the identity and allow only once
Add tests for the new functionality
Minor improvements around the code
Closes#15018
For start support showing sign message only
Support rejecting the request
Storybook integration
Add disabled tests for the main logic and sanity UI tests.
They crash on CI only and work locally on mac. Postponed finding out why
for now.
Closes: #14927
Abstract WalletConnectSDK to make it testable
Implement WC service pairing test
Bring back DAppsWorkflow tests back to life and add a pair modal test
Updates: #14927
- add new `showRadioButtons` and `showTitle` UI customization points
- adjust SB and expose all the existing modes, fix it to make it work
with multi selection
- integrate these new modes into SwapModal to align it with the Figma
design
Fixes#14780
- new panel created: `SwapInputPanel`
- some cleanups to the needed stores
- created a SB page demonstrating the use of 2 panels and the
`SwapExchangeButton`
- created QML tests
Fixes#14781
Things done here:
Integrate basic functionality for wallet connect in status-go
Update the list of dapps from the SDK
Retrieve the persistence dapps list from the backend as a fallback
if there is no connection and SDK can't be initialized
Provide a basic simple view of dapps in the wallet connect popup
Closes: #14557
Spent too much time figuring out the puzzle of
service->module->view->QML just to call a
status-go function.
Keeping this attempt for later while moving to a
simplified Controller/Provider approach. I will
come back to the abstraction when we add tests
to use it.
Updates: #14615
- create a custom circle button component for the Swap popup, with the
needed click event and a border area that can be overlaped with the
background as it looks in the design
Fixes#14782
- Some NIM's models define additional (not part of the
QAbstractModelItem API) method rowData to allow access to model's data
on UI side
- The same job can be done relying fully on public QAbstractModelItem
API using ModelUtils utility. It gives full transparency if we need
nim's model or other like ListModel replacement in tests/storybook
- propagate `tokensStore` to unbreak the Browser's wallet menu
Fixes#14805
Implement the initial Pairing user workflow and disconnect option for
the first session.
Also
- rename pairing modal accordingly (`PairWCModal.qml`) to make room for the proper
`ConnectDAppModal.qml`
- basic tests for service helpers
- update storybook to reflect the new user workflows
Closes#14607
Other changes
- start Wallet Connect SDK using web engine after wallet is ready
- source WC project ID from the constants in nim
- close list when opening the `ConnectDappModal`
- remove the old POC modal instantiation
- rename ConnectDappPopup to Modal for consistency
- move specific dapps related user settings to their place in the component
- add DAppsStore to be used for dapps abstraction
Updates #14556
The is image flag and source was not in sync due to sequential change
of source and isImage. This was causing the following warning:
`Warning: qrc:/StatusQ/Components/StatusRoundedImage.qml:27:5: QML StatusImage: Cannot open: qrc:/StatusQ/Components/help
Add a specific state to the saveSettings action to update the model
by reloading the data.
The previous implementation was using the same save address which
doesn't update. Either in the past there was a side effect that made it
work or it was never working.
Closes#14365
* Feat: New showcase models for a contact
* feat(ProfileShowcase): Integrate the new profile showcase backend
* fix(Storybook): Fix ProfileShowcaseModelsPage
* fix: fetch only requested profile showcase data
Support PR for https://github.com/status-im/status-go/pull/4982
* feat: Load and validate profile showcase for a contact in two steps
* fix: fetching criteria for profile showcase collectibles
* fix: review fixes
---------
Co-authored-by: Alex Jbanca <alexjb@status.im>
Add a separation layer for save/load/clear to ManageTokensModel
so that we can save/load from external sources.
The separate layer is composed of JSON as protocol, a set of signals
and slots for interface. The implementation forwards data to current
QSettings for storybook and nim controllers for the app.
Updates #13313, #13312
I was debugging a crash at login and found out that
TransactionDetailView was being loaded even when it was not being used;
my debugging code in `onComplete` was trying to access transaction data
from nim which was not set.
Updates #13663
This commit:
- improves selection of addresses to reveal
- keeps the selection state for the popup lifetime
- brings higher granularity in terms of signed requests by keypairs
- meets new requirements from the latest related Figma
- merges edit shared addresses feature and request to join community features
into a single component, cause the flow is logically the same, with the only
difference that when editing revealed addresses we don't show the community
intro screen
Fixes at least points 3 and 4 from #13988
- take the balance threshold value into account when presenting the
assets in the main wallet view
- additional fix from Emil for storing the threshold value
- storybook fixes to display the correct `currentCurrencyBalance` values
based on the address/wallet filters and mocking the threshold values
using TransactionStore
Fixes: #14017
- add placeholder image if the collection/community has none
- elide the whole group name, taking into account the copy button
- fix the tooltip position over such elided text
- do not go overboard and don't use a StatusSmartIdention just to to
display a rounded icon/image
- add an `interactive` property as a drop-in replacement for `enabled`;
the UI looks "disabled" but can still display e.g. a tooltip or some
loading animation
- add the ability to display a tooltip
- remove DisabledTooltipButton and replace it with a regular
`Status(Flat)Button`, using the above new features
- update storybook with the new `interactive` switch
Fixes#10185
- If only minted collectibles, section header visible. Otherwise, if only regular collectibles, section hidden.
- Updated header used to `FoldableHeader`.
Closes#13315
Stefan
Cuteivist
Lukáš Tinkl
Sale Djenic
Roman Chornii
Khushboo Mehta
belalshehab
Godfrain Jacques
Dario Gabriel Lipicar
Jonathan Rainville
Alex Jbanca
Michał Cieślak
Lungu Cristian
Ivan Belyakov
Noelia
Anthony Laibe
Alex Jbanca
Belal Shehab
Valentina1133
Anthony Laibe
Alexandra Betouni
Mikhail Rogachev
Valentina Novgorodtceva