- show countdown until which the sign (WalletConnect and Swap) dialogs
expire
- after expiration, hide the Reject/Sign buttons and display a plain
Close button
- make the dialogs non-closable by clicking outside or pressing Esc; the
user has to explicitely click some of the footer buttons
Fixes#16327Fixes#16314
- shows the remaining time until expiration with the circular progress
bar and a tooltip
- configurable timestamp and timeout in seconds (between 5 min and 7
days)
- add the respective storybook page
* refactor(community_tokens): only fetch holders when going to the page
Fixes#16307
Instead of fetching community token holders each time members change, we fetch when the page for the token is opened.
It shows a small loading text then the resulting holders.
If the list is already available (fetched previously, we show it directly).
There is still the timer to refresh the list if you stay on the page.
* add loading property to storybook
- simpler, standard property based API
- much lighter than deriving from the heavy StatusListItem
- should reduce RAM usage significantly, esp. with large communities
Iterates #11059
- fix for a corner case prob when there was a valid seedphrase word
(e.g. cat) that is at the same type a prefix for other valid suggestions
(e.g. category, catalog, ...); it was imposible to select it using Enter
key or mouse click from the suggestions popup at the last field
- add a QML regression test for this issue
- use standard subcomponents (StatusDropdown, StatusListView) reducing
code duplication and unifying UI/UX
Fixes#16291
- add a local popup with selection between "Status Connector" (external
link to Chrome Store) or "Wallet Connect" (the old flow involving
inputting the WC URI)
- simplify DAppsListPopup to use StatusDropdown to reduce code
duplication
- adjust SB and QML tests
Fixes#16111
This component is simpler version of TokenSelector, composed of the same
basic componets, useful when only assets are subject of selection.
Closes: #16234
- add various error/warning messages according to Figma (where it makes
sense)
- letters or more than 2 decimals are caught by the internal validator
so those combinations are impossible to enter
- fix marking the custom value as (in)valid
- fix selecting "Use default" after typing a custom value
- fix resetting to predefined value after typing a custom value that
matches one of the predefined ones
- reject typing thousands separator
- add regression QML tests for the above fixes
Fixes#15017
- the new C++ EmojiModel provides a simple wrapper around the existing
JSON to facilitate a faster access and to be able to search/filter in
QML using SFPM
- no more nested GridViews inside Repeaters
- get rid of emoji manipulation and search/filter using JavaScript
- included the C++ script to generate the emojiList.js
- re-evaluate the validators to be able to hide the warning after 3
seconds (the validators won't let the user select/paste an invalid
image; it's just the warning bubble that persisted)
- some small cleanups
Fixes#16210
Additionally there is hook on ClipboardUtils added
to detect if copied string is a wallet address and call addressWasShown.
Earlier that call was done internally on nim side.
Closes: #16196
There are two fixes needed here.
1. Status-go fix for unknown primitive when signing the message
2. Fix for Paraswap pairing failure due to required namespaces mismatch
Needs: https://github.com/status-im/status-go/pull/5755
Fixes#16165
All the logs about `settings_notificationsGetExPersonalMentions` are only to populate the model in the Notifications settings view, so it was pointless to load them on app start.
Now we lazy load them on loading that page.
An additional improvement that could be done later is to make it async and/or create a new API that gets all the DB info in one shot, because calling 4 APIs for each chat and community is a bit useless.
- mention the "Privacy Policy" document in the text explaining "Help us
improve Status", make a link to it and display it in a separate popup
- add a standalone header button to the settings page, doing the same
- extend storybook page with the "placement" param
Fixes#16157
- this fixes 2 small regressions, namely in how we calculate the
background corner radius and icon size when in the mode of `isRoundIcon`
- the "Saved addresses" button in wallet's left view is very special on
its own; overall we have only 2 instances of this "round" icon buttons
in the whole app
Fixes#16156
- add a secondary "loading" state (`loadingWithText`), that is show the
loading indicator next to the text
- simplify the StatusBaseButton layout (esp. handling the overall
opacity/visibility)
- add a QML test suite; the code was becoming too complex and adding a
simple boolean prop was getting "dangerous"
- port the SwapModal to use the new `loadingWithText` property
Fixes#15313
* feat(metrics): add onboarding screen metrics and section navigation
Fixes#16100
Adds metrics for navigating to the different screens of the onboarding and when navigating to a new section while logged in; only when enabled of course.
I refactored the code a little to make it simpler. I moved the check to see if the metrics collection is enabled in the async task itself, so we don't have to check it each time we add a new metric
* fix metric sent from module
* review comments
* add flowtype
- make it possible to configure the locale of the validator
- use the correct default decimal point in AmountValidator
- update/add the relevant tests for AmountToSendNew
WalletConnect cannot operate on shared cookies in between accounts. This commit will split the cookies and cache in different folders with the user public key as folder name.
1. The DAppsListProvider needs to receive all the user accounts so that it can process all dapps the user is connected to (the dapps filtering based on selected account is an internal impl. detail)
2. Call `revokeSession` on disconnect only if the dapp cannot be found in the WC active sessions. There is some overlapping between Browser connector and Wallet connect because both operate on the same data stored in the DB. If Browser connector controller removes WC data, the WC disconnect flows cannot be successfully completed.
3. Reuse the same notification flow for Browser connector as it's used for WC
4. Fix dapp filtering when processing the dapps that will be displayed in the UI.
(cherry picked from commit 21227893c2)
- manage the lifetime of the Custom tab button dynamically; setting the
tab button to `visible: false` doesn't unfortunately remove it from the
tab bar
Fixes#16052
- make the StatusBetaTag highlighted when used inside an active/checked
StatusSwitchTabButton
- simplify the components, get rid of MouseArea just for the sake of
setting the cursorShape
In some rare cases hiding collectibles was causing segfault, related to
checking if all timestamps are available. Combination of 2 SFPMs with
the same source and Aggregator working on those models. Additionally
filters/sorters were depending on the Aggregator value. The minimal
crashing sample has been isolated to be investigated in a separate
ticket. In this commit aggregator's value is applied in a deferred way
via Qt.callLater, fixing the issue.
Closes: #15775
Added limitations:
- allowed adding of max 20 accounts
- allowed adding of max 3 watch only accounts
- allowed adding of max 5 key pairs (including the profile key pair)
- allowed adding of max 20 saved addresses per mode
Closes#15934
The disconnect notifications were operating on `WalletConnectService.currentSessionProposal`. This object stores the current session object on connect, but it's not necessarily the same session the user wants to disconnect.
To fix this I'm getting the active sessions from status-go when the disconnect request is received (from Status or dapp). If the topic matches to any connection topic owned by the users accounts we'll show a notification.
(cherry picked from commit fea4e8ed76)
- completely removes the `ui/app/AppLayouts/Browser` QML app section
- removes the `app_service/service/bookmarks`,
`app/modules/main/browser_section` and
`src/app_service/service/dapp_permissions` NIM modules
- remove the Browser settings page and associated popups/components
- HTML links now always open in an external browser
- adjust the section indexes in `Constants`
- fixup the e2e tests
Fixes#14614
1. Hiding DApps button on not supported wallet account selection
2. Filtering DApps in connected dApps list based on account selection
closes: #15589closes: #15647
- display additional beta information as a tooltip
- don't overlap the Beta badge with the unread msg indicator
- some minor cleanups & fixes
Fixes#15795Fixes#15929
- remove the nested unneeded ScrollView
- cleanups and fixes in mocked models and stores to unbreak showing the
networks/routing in storybook
Fixes#15902
- format Big decimal numbers correctly according to the current locale;
some precisions loss is tolerated here for the display purposes
- fixes wrong decimal separators in some places and aligns with the
standard in terms of number of decimals, as everywhere else in the app
Fixes#15612Fixes#15790
- partially reuse the already available Global/Popups methods to hide
assets (which also emit proper notifications); those are needed as
anotehr shared modal from Popups uses it too (may come from outside of
Wallet)
- some warnings cleanup in the controller
Fixes#15777
Add a new NetworkChecker QObject to StatusQ to be used in checking
internet connection status. This is used by the WebEngineLoader
to only allow loading of web pages when there is an active internet
to cover for a corner case on MacOS where the internet connection is
not reestablished if the WebEngineView was loaded without an active
internet connection.
Closes: #15598, #15806
- set the correct widths and elide mode
- fixup the visuals of the NetworkFilter combo box (to disable it w/o
making it look disabled)
- fix passing the connection status down to DAppCard
* Disable the send button when the router returns errors.
* Display a red arrow on networks lacking sufficient gas for the transaction.
Closes#15700#15701
- This commit temporarily disables the MaxAmount button in the `SwapInputPanel` and `SendModal` components.
- The MaxAmount button will be reintroduced with the correct behavior in issue #15709 for the 2.31 release.
closes: #15710
The requirements are that we allow all available networks
to Wallet Connect
Also temporarily disable the tests that validate selection working
Closes: #15638
The static url validation state `Pairing.errors.ok` was directly
responsible for the validation action in UX. With current change
the validation is now based on the pairing response. When the
pairing response is received the UX is validated and after half second
UX is moved to the approval process (`ConnectedDAppModal`)
Closes: #15591
We have no easy way to check the protocol and provide a customized
error message. Therefore we generalizes the error message to network
not supported.
Closes: #15649
- just use the `model.stickers` to access the submodel, remove dead NIM
code
- make sure that the installed sticker packs are loaded, even before
first opening the Sticker popup
- StatusStickerMarket: fix the back button
- fix launching the Buy stickers modal (SendModal)
Fixes#15718
- when we arrive to a point when all input params are empty, disable the
middle Exchange button
- add QML test for the Exchange button enabled/disabled state
Fixes#15751
Add helper function to filter out dApps with sessions that don't
have any supported account in the available accounts list.
Use helper function to filter out dApps connected on other profiles
when listing dApps in the dApps list.
When disconnecting an app only disconnect sessions for the current
profile.
Closes: #14888, #15707
Also
- don't report error in case of status-go returning nil instead
of an empty array.
- fix misleading alias to AmountsArithmetic
- minor improvements requested in previous discussions
Updates: #15707
Adding local setting: metrics_popup_seen
Small refactoring: showing popup from main.qml
Showing popup: 1. on welcome screen, 2. in Settings/Privacy page and 3. after login when the popup has not been shown yet
Issue #15628
Add new settings page for metrics management - Privacy and security
Add popup to enable/disable metrics on Onboarding and Privacy screens
Add MetricsStore in QML
Issue #15490
Reverts changes introduced by 6eeb91 the connector integration
that were loading the SDK asynchronously. Not sure why it isn't working
though.
Closes: #15694
Also differentiate between l1 and l2 fees and check them against the
specific chain balance
Also
- Included tests for the new functionality
- Fixed some inconsistencies in handling types
Updates: #15552
Fixes#15507
Makes sure to enable the network where the owner token was minted before minting or airdroping a token.
This makes sure that the account selector shows the right balance and there is no ETH error before doing the transation
fix#15179 that triggers connection request from client
- Setup the initial architecture for connecting Status-go and UI
screens
- Implement the request Connection popup for Accept or Rejecting
connection
Fixing a bug where the community name is not shown in the `Send` button
Get the collectible community name from the community model for community tokens. Otherwise default to community id.
+ Fix WalletFooter layout when the buttons text exceeds the available width
to squash: Fixing send on owner token - name
1. Show Send Button on wallet footer when all accounts is selected
2. Hide Send Button in collectibles context menu and collectibles details view when the collectible is not owned by the user
3. Disable the Send Button in collectibles context menu and collectibles details view when the collectible is soulbound
to squash: Fine tune send action on collectibles
to squash: Fine tune send on collectibles
to squash: Fine-tune collectibles
Updating the SendModal to receive an accountAddress to preselect the account instead of the account item model
to squash: Fix account selection. by address
The root cause of this issue is the improper computation of the `accountBalance` expression role in the accounts model. Its value depends on another model (`filteredBalancesModel`) and by the time the expression role gets computed the proper `balance ` is not ready in the `filteredBalancesModel`.
This is a quick fix, but maybe the real fix should be restructuring the adapter and the model dependencies. I'd look out for any `ModelUtils` usage and replace it with a declarative approach if possible.
In comparison to the previous version it provides simpler API
and better validation based on AmountValidator.
Old version will be removed after full integration of the new version.
Replace missing methods calls of chart after it was replaced with a different
component.
Update chart on networks change.
Fix data for all chains requested - both test and real networks.
Fix some unrelated qml errors
Compute max fees for transaction related requests and display the
results to user.
Also:
- Add helper to convert from hex (backend) to decimal (frontend) values.
- Add helper to convert from float gwei to hex wei
- Update tests to accommodate for the new dependencies.
Sourcing of account balances is not included therefore the transaction is
allowed to go through even if the account balance is insufficient. An error
will be generated by the backend in this case.
Updates: #15192
Fixes#15614
* feat(StatusQ): add StatusExperimentalTag component and page
* chore(beta): add beta tag to ENS
* chore(beta): add beta tag to Activity tab
* chore(beta): add beta tag to wallet settings
* chore(beta): add beta tag to Notification Center
- Network item hover color, selected item border and background changed to have a better UX and being more accurate to the new design.
- Disabled option of unchecking networks. At least, always one should be selected.
Fixes#15526
Fixes the import popup showing the wrong state. That was because a param was removed from the function, but not from the call to that function, so `true` was passed in `invitationPending` when it shouldn't have.
I also added a call to `spectateCommunity` before the community intro popup so that the community spectated beforee sending the request
Fixes#15382
So there is no easy way from the models and data we currently have in the client to know which account minted the owner token. So the easiest way to help the user is just to catch the error and show a better message.
Description:
Enhanced the SendModal.qml to filter out non-transferable (soulbound) collectibles from the send model. This ensures that only transferable collectibles are displayed when sending.
Changes:
Updated SendModal.qml to include a SortFilterProxyModel with a ValueFilter.
The ValueFilter targets the soulbound role and filters out collectibles with soulbound set to false.
Issue:
Closes#14578
- remove old popup and related components/adaptors
- simplify the API of the Sign/Approve modals to take pre-formatted
amounts as strings
- correct login/auth icon
- SB: make it possible to open the new secondary modals
- SB: fix the `fetchSuggestedRoutes` response handling, pass around the
`uuid` and inject it to the mocked suggested routes
- adjust SB pages and tests
Fixes#15443
* fix(statusProfileNavBarTabButton): Fixed backgound color and ring for StatusNavBarTabButton that's displayed at left bottom of the main window.
Fixed signal typo in CommunityTokensStore.
Closes#15479.
* fix(CommunityTokenStore): fixed signal handler name on qml side.
* feat(icon): show a red dot when we have unread notifications
* feat(windows-icon): update windows icon to have a white border
Fixes#14788Fixes#14855
Adds a red dot on the tray icon if there is an unread message in an unmuted channel or in the activity center
Implemented using the fees from the transaction data sent
by the dApp.
Also fixed the nim status go wrapper to send proper formatted
string as expected on the other side.
Updates: #15192
* feat(WalletConnect): Implement sign request modal
1. Implementing sign request modal based on SignTransactionModalBase
2. Adding storybook page
3. Integrate it in the app
4. Removing DAppRequestModal
5. Update RoundImageWithBadge to preserve aspect ratio between badge and main image
* fix(WalletConnect): Remove unneeded properties from WalletConnectService API
Removing `selectedAccountAddress` and `loginType`. These properties are now passed through DAppsWorkflow API
* fix(WalletConnect): Removing unnecessary changes
* fix(sharedAddress): hide non fully imported accounts from shared address
Fixes#15471
We only filtered out watch only accounts, but we also need to make sure it was a fully imported account, ie an account that is usable, hence why using `canSend`. It is the same property they use in the SendTransaction modal
- Created data transformation file called `WalletAccountsAdaptor` for `SendModal`. Now it contains the owned wallet accounts model data transformations.
- Added common formatting method for short chain ids to some utils and partially removed backend dependency.
- Component name changed to be more precise with what it represents.
- Removed `RootStore` dependency from `Helpers.qml`.
- Removed unnecessary method `lookupAddressObject` from `RootStore`.
- Updated `SendModal` property bindings related to recipient.
- Some activity controller interaction details moved to transactions store instead of being directly in `SendModal`.
- Type enum living in `RecipientSelectorPanel` is moved to `Helpers`. Since it doesn't depends on the specific component and it's used in other global places.
Part of #15208
Lukáš Tinkl
Jonathan Rainville
Sale Djenic
Dario Gabriel Lipicar
Anastasiya Semenkevich
Cuteivist
Michał Cieślak
Alexandra Betouni
Khushboo Mehta
Seitseman
Alex Jbanca
Andrey Bocharnikov
Igor Sirotin
Valentina Novgorodtceva
Anthony Laibe
Godfrain Jacques
Roman Chornii
belalshehab
Stefan
Valentina1133
richΛrd
Ivan Belyakov
Michal Iskierko
Lungu Cristian
Noelia
Alex Jbanca