status-im
/
specs
mirror of https://github.com/status-im/specs.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
specs/docs/stable/6-payloads.md

13 KiB
Raw Blame History

permalink parent title
/spec/6 Stable specs 6/PAYLOADS

6/PAYLOADS

Version: 0.3

Status: Stable

Authors: Adam Babik adam@status.im, Andrea Maria Piana andreap@status.im, Oskar Thorén oskar@status.im (alphabetical order)

Abstract

This specifications describes how the payload of each message in Status looks like. It is primarily centered around chat and chat-related use cases.

The payloads aim to be flexible enough to support messaging but also cases described in the Status Whitepaper as well as various clients created using different technologies.

Table of Contents

Introduction

In this document we describe the payload format and some special considerations.

Payload wrapper

All payloads are wrapped in a protobuf record record:

message StatusProtocolMessage {
  bytes signature = 4001;
  bytes payload = 4002;
}

signature is the bytes of the signed SHA3-256 of the payload, signed with the key of the author of the message. The signature is needed to validate authorship of the message, so that the message can be relayed to third parties. If a signature is not present, but an author is provided by a layer below, the message is not to be relayed to third parties and it is considered plausibly deniable.

Encoding

The payload is encoded using Protobuf

Types of messages

Message

The type ChatMessage represents a chat message exchanged between clients.

Payload

The protobuf description is:

message ChatMessage {
  // Lamport timestamp of the chat message
  uint64 clock = 1;
  // Unix timestamps in milliseconds, currently not used as we use Whisper/Waku as more reliable, but here
  // so that we don't rely on it
  uint64 timestamp = 2;
  // Text of the message
  string text = 3;
  // Id of the message that we are replying to
  string response_to = 4;
  // Ens name of the sender
  string ens_name = 5;
  // Chat id, this field is symmetric for public-chats and private group chats,
  // but asymmetric in case of one-to-ones, as the sender will use the chat-id
  // of the received, while the receiver will use the chat-id of the sender.
  // Probably should be the concatenation of sender-pk & receiver-pk in alphabetical order
  string chat_id = 6;

  // The type of message (public/one-to-one/private-group-chat)
  MessageType message_type = 7;
  // The type of the content of the message
  ContentType content_type = 8;

  oneof payload {
    StickerMessage sticker = 9;
  }

  enum MessageType {
    UNKNOWN_MESSAGE_TYPE = 0;
    ONE_TO_ONE = 1;
    PUBLIC_GROUP = 2;
    PRIVATE_GROUP = 3;
    // Only local
    SYSTEM_MESSAGE_PRIVATE_GROUP = 4;}
  enum ContentType {
    UNKNOWN_CONTENT_TYPE = 0;
    TEXT_PLAIN = 1;
    STICKER = 2;
    STATUS = 3;
    EMOJI = 4;
    TRANSACTION_COMMAND = 5;
    // Only local
    SYSTEM_MESSAGE_CONTENT_PRIVATE_GROUP = 6;
  }
}

Payload

Field Name Type Description
1 clock uint64 The clock of the chat
2 timestamp uint64 The sender timestamp at message creation
3 text string The content of the message
4 response_to string The ID of the message replied to
5 ens_name string The ENS name of the user sending the message
6 chat_id string The local ID of the chat the message is sent to
7 message_type MessageType The type of message, different for one-to-one, public or group chats
8 content_type ContentType The type of the content of the message
9 payload `Sticker nil`

Content types

Content types are required for a proper interpretation of incoming messages. Not each message is plain text but may carry a different information.

The following content types MUST be supported:

  • TEXT_PLAIN identifies a message which content is a plaintext.

There are also other content types that MAY be implemented by the client:

  • STICKER
  • STATUS
  • EMOJI
  • TRANSACTION_COMMAND
Sticker content type

A ChatMessage with STICKER Content/Type MUST also specify the ID of the Pack and the Hash of the pack, in the Sticker field of ChatMessage

message StickerMessage {
  string hash = 1;
  int32 pack = 2;
}

Message types

Message types are required to decide how a particular message is encrypted and what metadata needs to be attached when passing a message to the transport layer. For more on this, see 3/WHISPER-USAGE and 9/WAKU-USAGE.

The following messages types MUST be supported:

  • ONE_TO_ONE is a message to the public group
  • PUBLIC_GROUP is a private message
  • PRIVATE_GROUP is a message to the private group.

Clock vs Timestamp and message ordering

If a user sends a new message before the messages sent while the user was offline are received, the new message is supposed to be displayed last in a chat. This is where the basic algorithm of Lamport timestamp would fall short as it's only meant to order causally related events.

The status client therefore makes a "bid", speculating that it will beat the current chat-timestamp, s.t. the status client's Lamport timestamp format is: clock = max({timestamp}, chat_clock + 1)`

This will satisfy the Lamport requirement, namely: a -> b then T(a) < T(b)

timestamp MUST be Unix time calculated when the message is created in milliseconds. This field SHOULD not be relied upon for message ordering.

clock SHOULD be calculated using the algorithm of Lamport timestamps. When there are messages available in a chat, clock's value is calculated based on the last received message in a particular chat: max(timeNowInMs, last-message-clock-value + 1). If there are no messages, clock is initialized with timestamp's value.

Messages with a clock greater than 120 seconds over the Whisper/Waku timestamp SHOULD be discarded, in order to avoid malicious users to increase the clock of a chat arbitrarily.

Messages with a clock less than 120 seconds under the Whisper/Waku timestamp might indicate an attempt to insert messages in the chat history which is not distinguishable from a datasync layer re-transit event. A client MAY mark this messages with a warning to the user, or discard them.

clock value is used for the message ordering. Due to the used algorithm and distributed nature of the system, we achieve casual ordering which might produce counter-intuitive results in some edge cases. For example, when one joins a public chat and sends a message before receiving the exist messages, their message clock value might be lower and the message will end up in the past when the historical messages are fetched.

Chats

Chat is a structure that helps organize messages. It's usually desired to display messages only from a single recipient or a group of recipients at a time and chats help to achieve that.

All incoming messages can be matched against a chat. Below you can find a table that describes how to calculate a chat ID for each message type.

Message Type Chat ID Calculation Direction Comment
PUBLIC_GROUP chat ID is equal to a public channel name; it should equal chatId from the message Incoming/Outgoing
ONE_TO_ONE let P be a public key of the recipient; hex-encode(P) is a chat ID; use it as chatId value in the message Outgoing
user-message let P be a public key of message's signature; hex-encode(P) is a chat ID; discard chat-id from message Incoming if there is no matched chat, it might be the first message from public key P; you can discard it or create a new chat; Status official clients create a new chat
PRIVATE_GROUP use chatId from the message Incoming/Outgoing find an existing chat by chatId; if none is found, we are not a member of that chat or we haven't joined that chat, the message MUST be discarded

Contact Update

ContactUpdate is a message exchange to notify peers that either the user has been added as a contact, or that information about the sending user have changed.

message ContactUpdate {
  uint64 clock = 1;
  string ens_name = 2;
  string profile_image = 3;
}

Payload

Field Name Type Description
1 clock uint64 The clock of the chat with the user
2 ens_name string The ENS name if set
3 profile_image string The base64 encoded profile picture of the user

Contact update

A client SHOULD send a ContactUpdate to all the contacts each time:

  • The ens_name has changed
  • The profile image is edited

A client SHOULD also periodically send a ContactUpdate to all the contacts, the interval is up to the client, the Status official client sends these updates every 48 hours.

SyncInstallationContact

SyncInstallationContact messages are used to synchronize in a best-effort the contacts to other devices.

message SyncInstallationContact {
  uint64 clock = 1;
  string id = 2;
  string profile_image = 3;
  string ens_name = 4;
  uint64 last_updated = 5;
  repeated string system_tags = 6;
}

Payload

Field Name Type Description
1 clock uint64 clock value of the chat
2 id string id of the contact synced
3 profile_image string base64 encoded profile picture of the user
4 ens_name string ENS name of the contact
5 array[string] Array of system_tags for the user, this can currently be: ":contact/added", ":contact/blocked", ":contact/request-received"

SyncInstallationPublicChat

SyncInstallationPublicChat message is used to synchronize in a best-effort the public chats to other devices.

message SyncInstallationPublicChat {
  uint64 clock = 1;
  string id = 2;
}

Payload

Field Name Type Description
1 clock uint64 clock value of the chat
2 id string id of the chat synced

PairInstallation

PairInstallation messages are used to propagate information about a device to its paired devices.

message PairInstallation {
  uint64 clock = 1;
  string installation_id = 2;
  string device_type = 3;
  string name = 4;
}

Payload

Field Name Type Description
1 clock uint64 clock value of the chat
2 installation_id string A randomly generated id that identifies this device
3 device_type string The OS of the device ios,android or desktop
4 name string The self-assigned name of the device

MembershipUpdateMessage and MembershipUpdateEvent

MembershipUpdateEvent is a message used to propagate information about group membership changes in a group chat. The details are in the Group chats specs

Upgradability

There are two ways to upgrade the protocol without breaking compatibility:

  • Accretion is always supported
  • Deletion of existing fields or messages is not supported and might break compatibility

Security Considerations

Design rationale

Changelog

Version 0.3

Released May 22, 2020

  • Added language to include Waku in all relevant places