Summary:
DrawImageWithDrawee has caused NPEs when using Nodes in various cases
in RNFeed. This patch explicitly throws a RuntimeException, so that we can
debug as to whether this is coming from bad sources or a bad size for the
image.
Differential Revision: D3574998
Summary: This is the most straightforward fix for the double detach issue. If a view is not attached, then addViewInLayout never propagates onAttach, and adding through attachViewToParent is a no op. We could hack something in to attach clipped FlatViewGroups in onClippingRect, but any other view that relies on onAttachedToWindow will have similar issues.
Reviewed By: ahmedre
Differential Revision: D3560565
Summary: Since Nodes' manageChildren doesn't enqueue the child updates immediately, commands were being directed to non-updated views. Previously we applied updates for the shadow node before dispatching the command, but we can instead wait to fire commands until after we update the view hierarchy.
Reviewed By: ahmedre
Differential Revision: D3568541
Summary: Supports show layout bounds either by override within FlatViewGroup, or if show layout bounds is set in settings. Currently requires app restart to disable.
Reviewed By: ahmedre
Differential Revision: D3553669
Summary: Fixes needing to specify exact height of react views in Mason. Uses a ViewTreeObserver to delay draw until we have correct bounds.
Reviewed By: sriramramani
Differential Revision: D3527122
Summary:
Nodes wasn't supporting text decorations to the line (strike through
and underline). This patch implements that.
Differential Revision: D3512711
Summary: We do want to only apply updates when a view previously wasn't mounted and didn't have a backing view created. Previously we were applying updates to the view regardless of the mount state, which resulted in positioning bugs. Rather than revert, I cleaned up the code Ahmed fixed, since didUpdate || ensureBackingViewIsCreated() was both a bug and obscure, as the two should have a swapped order.
Reviewed By: sriramramani
Differential Revision: D3538734
Summary:
@public
Text was not correctly respecting padding. We would account for it when measuring, but then not actually apply the padding to the text. This adds support for proper padding
Reviewed By: andreicoman11
Differential Revision: D3516692
Summary:
Previously, to fix the issue of commands happening before the Views
were made and attached to the hierarchy, a check was added to see if a node
had not been mounted to a View, to update its hierarchy. In reality, we need
to do this irrespective, since a node could be mounted to a View, but its
children may not yet be attached, for example. Note that if there is nothing
to be done, this won't do extra work (i.e. applyUpdates recursively goes
through the tree from the node on which we did the operation to apply updates,
but if there are no updates, we stop traversing that praticular subtree).
Reviewed By: sriramramani
Differential Revision: D3511462
Summary:
The TextInput spannables are being set wrong by Nodes. Consequently,
when you hit space after a word, anything you type is highlighted, though it
shouldn't be.
Differential Revision: D3507516
Summary:
The results from measureInWindow were always wrong the first time it
was called. This was due to the fact that the view in question was not
actually a view yet, so the results were incorrect. This patch uses the
existing measure functionality (which can measure virtual nodes) to measure
the view, while modifying it to properly get the results relative to the
window instead of relative to the root view.
Reviewed By: sriramramani
Differential Revision: D3501544
Summary:
Depends on D3120798
Depends on D3120631
Enables D3120631 for nodes. This implementation seems to work but let me know if I'm doing something really stupid.
Reviewed By: ahmedre
Differential Revision: D3120814
Summary:
Modals were broken in Nodes, because the custom measurement logic for
all the children of the ReactModalShadowNode was not being applied (because we
wrapped it in a NativeViewWrapper). This change adds a custom flat node type
for modals.
Differential Revision: D3499557
Summary:
Fix DrawImageWithPipeline's code for checking whether or not an image
request exists or not to be the same as DrawImageWithDrawee's.
Differential Revision: D3489532
Summary:
In manageChildren, we were assuming that the indices that
were passed in to be removed were sorted, however, they weren't.
This patch sorts the children to be removed. Note that it doesn't
explicitly sort move, since these are sorted by the MoveProxy class.
Reviewed By: astreet
Differential Revision: D3474639
Summary:
Groups encountered a pretty major crash where, in many cases,
we would find that DrawCommands and Views were out of sync. This
turns out to be due to the fact that when we drop views from the
root view, we remove each child using removeChildAt (which ultimately
causes an invalidate and redraw). If this happens for a
FlatViewGroup, this causes issues where the Views are all removed,
but there are some DrawCommands (potentially DrawViews) that aren't
removed, hence them going out of sync.
Reviewed By: astreet
Differential Revision: D3473916
Summary: Currently only FlatViewGroup children were clipped, rather than all offscreen Android views.
Reviewed By: ahmedre
Differential Revision: D3462002
Summary:
During the patch for fixing the order of UI operations, we apply
updates to any node receiving a ViewManager command in order to ensure that
nodes that were not yet mounted to a View and not yet attached to their parent
would be properly able to receive the event. However, if a node is already a
view, calling the update could cause unwanted things to happen (for example,
the View's bounds changing improperly), because we're only traversing that
node of the tree and down (instead of the entire tree). This fixes the issue
by only applying updates to the node if the view mount state has changed.
Reviewed By: sriramramani
Differential Revision: D3448356
Summary:
A Layout's text can either be an Ellipsizer or a SpannedEllipsizer.
SpannedEllipsizer implements Spannable, but Ellipsizer doesn't. We were
casting the Layout's text directly to a Spanned without first checking as to
whether or not it was actually a Spanned.
Reviewed By: sriramramani
Differential Revision: D3435075
Summary:
The nodes version of D3364550. The only difference is that here we
don't get `onSizeChanged` but `onBoundsChanged`, and we need to compute the
height/width of the target image from those bounds. ahmedre please let me know
if any of these assumptions are in any way incorrect.
Reviewed By: ahmedre
Differential Revision: D3424843
Summary:
This is needed for the upcoming loading from multiple sources (D3364550 for the non-nodes version) and cache interrogation (D3392751 for non-nodes version).
This postpones creating the DraweeRequestHelper until the image size is known, which in the nodes universe is when `onBoundsChanged` is called.
Reviewed By: foghina, ahmedre
Differential Revision: D3413467
Summary:
Fix touch inspector when using Nodes by implementing custom logic.
This logic now takes into account that non-View nodes need to be clickable.
Reviewed By: astreet
Differential Revision: D3433927
Summary:
Made some improvements to RCTText based on some of our learnings from components for android. This now resembles diffusion/FBS/browse/master/fbandroid/java/com/facebook/components/widget/TextSpec.java
Things that have improved:
- Calculation of text width is now faster (we noticed in components that .getWith() on the layout is all that is needed and it is much faster)
- Use text layout builder to abstract away a lot of the low level details of static / boring layouts and text measurements
- Handle MeasureMode correctly, previously AT_MOST was not supported.
- Better handling of RTL text by using TextLayoutBuilder where I made changes to support RTL text in components. Specifically RTL text measured with UNSPECIFIED or AT_MOST.
- There was an incorrect assumption being made that when measure() was not called the text had to be boring. This is incorrect, Arabic text is never boring for example. Also multiline text is not boring either and may have exact sizing.
Reviewed By: ahmedre
Differential Revision: D3374752
Summary:
The dispatchViewManager command should, according to the spec, only
be executed after children are added. On Nodes, however, due to the fact that
the Views in question may not have been created until the call to the command
occurred, the dispatchViewManagerCommand may occur too early. Consequently,
ensure that we apply any state updates to the Node represented by that
reactTag before we enqueue the view manager command (this will ensure that
views are properly added to the parent, etc before sending the command).
Reviewed By: astreet
Differential Revision: D3428855
Summary:
@public
This adds support for specifying multiple sources for an image component, so that native can choose the best one based on the flexbox-computed size of the image.
The API is as follows: the image component receives in the `source` prop an array of objects of the type `{uri, width, height}`. On the native side, the native component will wait for the layout pass to receive the width and height of the image, and then parse the array to find the best fitting one. For now, this does not support local resources, but it will be added soon.
To see how this works and play with it, there's an example called `MultipleSourcesExample` under `ImageExample` In UIExplorer.
Reviewed By: foghina
Differential Revision: D3364550
Summary:
Historically, removeClippedSubviews for Nodes would not clip views
that overflowed their parent. This patch changes that, so that Nodes can
properly clip views when they are off screen (even if they have descendants
that overflow the bounds of their parent).
This is done by calculating a set of offsets from the actual width and
height of the view, and using those in the clipping calculations.
Reviewed By: sriramramani
Differential Revision: D3409859
Summary:
As an optimization, for something like a ScrollView which contains
a FlatViewGroup containing posts, make sure that each post is explicitly
mounted to a View. This may help improve performance, especially when said
Views are otherwise inlined as DrawCommands instead of actual Views.
Reviewed By: astreet
Differential Revision: D3161232
Summary:
The removeClippedSubviews optimization often detaches views while
maintaining strong references to them (so they can be attached again later
on). However, when removing the parent view, any detached views end up not
being cleaned up or removed, thus leaking memory. This fixes this by
explicitly dropping detached views when the parent is removed.
Reviewed By: astreet
Differential Revision: D3337513
Summary:
Text in Nodes is squashed into a single DrawCommand for drawing a
Boring or StaticLayout. Touch is handled using a TextNodeRegion subclass of
NodeRegion that knows how to identify pieces of text inside of the DrawCommand
based on spans in the text. However, we only use a TextNodeRegion on the
second call for updateNodeRegion for an RCTText. If there is only one call,
the NodeRegion will just be a normal one. This patch ensures that the
NodeRegion for an RCTText is always a TextNodeRegion, allowing for null
Layouts that are set when the DrawCommand is made.
Reviewed By: astreet
Differential Revision: D3291682
Summary:
As of D3235050, Nodes supports the optimization of removing clipped
subviews from the hierarchy. However, because Nodes supports overflow:visible,
this could cause issues when DrawCommands overflow the bounds of their parent
container. This patch fixes this by not clipping any overflowing Nodes.
Reviewed By: astreet
Differential Revision: D3235072
Summary:
RN has an optimization in which a ScrollView (or similar ViewGroups)
can ask to remove clipped subviews from the View hierarchy. This patch
implements this optimization for Nodes, but instead of adding and removing the
Views, it attaches and detaches Views instead.
Note that this patch does not handle overflow: visible. This is addressed in a
stacked patch on top of this patch (to simplify the review process).
Reviewed By: astreet
Differential Revision: D3235050
Summary:
Nodes crashed when setJSResponder was called on a virtual (non-View)
node, because a View could not be found using that react tag. The solution is
two fold - first, to figure out the View parent and pass that to
setJSResponder in addition to that of the virtual tag. Secondly, we weren't
mounting views that had animation properties (transform, for example) to
Views, which caused related code to fail.
Reviewed By: sriramramani
Differential Revision: D3301310
Summary:
Canvas.save by default saves both the matrix (for translations,
scaling, etc) and the clip (clipRect) - in most of our cases, we really only
care to save and restore the clip, not the matrix.
Reviewed By: sriramramani
Differential Revision: D3235698
Summary:
With nodes, it's possible for a touchable region to not be
explicitly mounted to a View. To work around this (and allow the region to
be the handler of the touch event), FlatViewGroup intercepts touch events
when the touch lies within any of the virtual NodeRegions.
This can sometimes be wrong - the canonical example is when touch starts
outside of a particular FlatViewGroup (so someone else, for example a
sibling) intercepts the touch event, and then the person moves over a
different FlatViewGroup, causing it to intercept the touch event when it
shouldn't. To fix this, we only allow intercepting touch events due to
NodeRegions on the down event.
Reviewed By: astreet
Differential Revision: D3160152
Summary:
By default, Nodes causes views to not be clipped, unless overflow is
explicitly set to hidden. Consequently, Nodes sets all the clipping bounds to
negative infinity, and does some extra work (saving the canvas layer,
clipping, etc) before drawing. This optimization skips the extra work when
it's not needed.
Reviewed By: sriramramani
Differential Revision: D3161268
Summary:
Initially, we used to mount nodes to Views anytime a node was
clicked. This was not useful, since we could still not handle touch when
a touch event was already dispatched. Later, a fix was pushed that
supported handling touch events for non-View NodeRegions. Part of the
intention was to remove this code, but it was forgotten.
Reviewed By: sriramramani
Differential Revision: D3160532
Summary: This allows users of the API to have greater control over handling RTL. One example is Components which needs this greater control to correctly handle RTL.
Differential Revision: D3120721
Summary:
UIImplementation has a few methods that in the end touch native Views, such as dispatchViewManagerCommand, addAnimation, sendAccessibilityEvent etc. There are 2 cases where it is possible to have those methods called on shadow nodes that don't have backing Views created:
- backing view is scheduled to be created but not commited yet (StateBuilder accumulates createView commands into a queue and flushes it in the very end)
- shadow node doesn't mount to a View so there is no backing View
Touching View in UI thread in these 2 cases will either lead to silent error (e.g. failure callback will execute), or a native crash.
This diff is overriding all UIImplementation methods that touch Views in UI thread and makes sure that backing View is created before we do so.
Reviewed By: ahmedre
Differential Revision: D3046392
Ahmed El-Helw
Seth Kirby
Dave Miller
Felix Oghina
Andy Street
Andrei Coman
Emil Sjolander
Denis Koroskin