* construct all unslashed, participating balances in one validator scan
* remove altair benchmarking setup for block_sim
* revert a benchmarking change from proc to func
* remove more benchmarking func/proc tweaks
* re-add asSeq, which is necessary because unsafeAddr
* ... except for the block_sim benchmark part
* approximately double altair epoch processing speed
* don't redundantly clear state balances cache
* only invalidate altair state balances cache once in process_rewards_and_penalties()
* cleanups
* use ForkedTrustedSignedBeaconBlock.ionit where appropriate
* move `is_aggregator` to `spec/`
* use `errReject` in a few more places
* update enr fork id when time is auspicious
* use network broadcast functions
* Return Ignore for aggregate signature validation timeouts
...consistently between aggregates and attestations.
* clean up some more reject/ignore rules
* shorten texts a bit
* errReject->checkedReject, use err helpers throughout
* get rid of quarantine in exitpool as well
* Fix getForkSchedule call.
Create cache of all configuration endpoints at node startup.
Add prepareJsonResponse() call to create cached responses.
Mark all procedures with `raises`.
* Add getForkSchedule to VC.
Fix getForkSchedule return type for API.
More `raises` annotations.
Fix VC fork_service.nim.
* Use `push raises` instead of inline `raises`.
* Improvements for REST API aggregated attestations and attestations processing.
* Rename eth2_network.sendXXX procedures to eth2_network.broadcastXXX.
Add broadcastBeaconBlock() and broadcastAggregateAndProof().
Fix links to specification in REST API declarations.
Add implementation for v2 getStateV2().
Add validator_duties.sendXXX procedures which not only broadcast data, but also validate it.
Fix JSON-RPC/REST to use new validator_duties.sendXXX procedures instead of own implementations.
* Fix validator_client online nodes count incorrect value.
Fix aggregate and proof attestation could be sent too late.
* Adding timeout for block wait in attestations processing.
Fix compilation errors.
* Attempt to debug aggregate and proofs.
* Fix Beacon AIP to use `sendAttestation`.
Add link comment to produceBlockV2.
* Add debug logs before publish operation for blocks, attestations and aggregated attestations.
Fix attestations publishing issue.
* logging fixes
`indexInCommnittee` already logged in attestation
Co-authored-by: Jacek Sieka <jacek@status.im>
* start of peer cycling
* discover new peers when low coverage
* disconnect unresponsive peers
* cleaning up a bit
* smarter cycling
* remove lowpeer event
* use sync_protocol to get metadata
* moved cycling to discovery
* fix discovery for tests
* change test
* various tweaks
* Faster discovery
* start of big refacto
* removed peer_balancer
* updated test
* added lazydial
* allow at least 10 incoming conn
* popcount -> countOnes
* allow max_conn - outgoingconn incoming connections
* add dOut check
* Removed lazyDial option and better kick
* use attnets in scoring
* only score peer with metadata
* cleanup
* use topic subscription
* rework dialing filtering, fix metadata compat issue
* send attestations and exit messages on fork-appropriate topic
* document why use wall clock over attestation slot
* centralize some fork-topic-picking-logic in eth2_network
* pick up new test in summary
* allow specified GetTimeFn for testing purposes
* add GenesisTime and use it in eth2_network
* replace GetTimeFn and GenesisTime with GetBeaconTimeFn
* reorganize ssz dependencies
This PR continues the work in
https://github.com/status-im/nimbus-eth2/pull/2646,
https://github.com/status-im/nimbus-eth2/pull/2779 as well as past
issues with serialization and type, to disentangle SSZ from eth2 and at
the same time simplify imports and exports with a structured approach.
The principal idea here is that when a library wants to introduce SSZ
support, they do so via 3 files:
* `ssz_codecs` which imports and reexports `codecs` - this covers the
basic byte conversions and ensures no overloads get lost
* `xxx_merkleization` imports and exports `merkleization` to specialize
and get access to `hash_tree_root` and friends
* `xxx_ssz_serialization` imports and exports `ssz_serialization` to
specialize ssz for a specific library
Those that need to interact with SSZ always import the `xxx_` versions
of the modules and never `ssz` itself so as to keep imports simple and
safe.
This is similar to how the REST / JSON-RPC serializers are structured in
that someone wanting to serialize spec types to REST-JSON will import
`eth2_rest_serialization` and nothing else.
* split up ssz into a core library that is independendent of eth2 types
* rename `bytes_reader` to `codec` to highlight that it contains coding
and decoding of bytes and native ssz types
* remove tricky List init overload that causes compile issues
* get rid of top-level ssz import
* reenable merkleization tests
* move some "standard" json serializers to spec
* remove `ValidatorIndex` serialization for now
* remove test_ssz_merkleization
* add tests for over/underlong byte sequences
* fix broken seq[byte] test - seq[byte] is not an SSZ type
There are a few things this PR doesn't solve:
* like #2646 this PR is weak on how to handle root and other
dontSerialize fields that "sometimes" should be computed - the same
problem appears in REST / JSON-RPC etc
* Fix a build problem on macOS
* Another way to fix the macOS builds
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
The spec imports are a mess to work with, so this branch cleans them up
a bit to ensure that we avoid generic sandwitches and that importing
stuff generally becomes easier.
* reexport crypto/digest/presets because these are part of the public
symbol set of the rest of the spec types
* don't export `merge` types from `base` - this causes circular deps
* fix circular deps in `ssz/spec_types` - this is the first step in
disentangling ssz from spec
* be explicit about phase0 vs altair - longer term, `altair` will become
the "natural" type set, then merge and so on, so no point in giving
`phase0` special preferential treatment
Simpler module name for stuff that covers forks
* check that runtime config matches database state
* also include some assorted altair cleanups
* use "standard" genesis fork in local testnet to work around missing
runtime config support
* update validator key cache on startup
Versions prior to 1.1.0 do not write a validator key cache at all.
Versions from 1.4.0 and upwards require an immutable validator key cache
to verify blocks - normally, block verification fills the cache but that
assumes that at least one block was verified by a version that has the
key cache.
Taken together, this breaks direct upgrades from anything <1.1.0 to
1.4.0.
The fix is simply to refresh fill the cache from an existing state on
startup.
* also log serious block validation failures at info level
This refactoring puts the JSON-RPC and REST APIs on more equal footing
by renaming and moving things around, creating a separation between
client and server, and documenting what they are - the aim is to have a
simple-to-use base to start from when developing API clients, as well as
make it easier to navigate the code when looking for the legacy JSON-RPC
interface vs the new REST API.
* move REST client, serialization and supporting types to spec/eth2_apis
* REST stuff now starts with `rest_`, JSON-RPC stuff starts with `rpc_`,
more or less
* simplify imports such that there's a simple module to import for both
server and client
* map REST type and proc names to yaml spec more closely - in
particular, reuse operation and type names in `rest_types` to make
comparisons against spec more easy
* cleaner separation between client and server modules - modules common
between server and client such as `rest_types` and serialization move to
the spec folder - this allows the client to be built with less knowledge
about server internals
* Fix firstSuccess() template missing timeouts.
* Fix validator race condition.
Fix logs to be compatible with beacon_node logs.
Add CatchableError handlers to avoid crashes.
Move some logs from Notice to Debug level.
Fix some [unused] warnings.
* Fix block proposal issue for slots in the past and from the future.
* Change sent to published.
* Address review comments #1.
* some whole-file copies from altair branch
* rpc/node_api and rpc/node_rest_api also need to be copied
* remove new sync committee-related functionality
* bump libp2p
* altair sync v2
Use V2 sync requests after the altair fork has happened, according to
the wall clock
* Fix the behavior of the v1 req/resp calls after Altair
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
* Initial commit.
* Exporting getConfig().
* Add beacon node checking procedures.
* Post rebase fixes.
* Use runSlotLoop() from nimbus_beacon_node.
Fallback implementation.
Fixes for ETH2 REST serialization.
* Add beacon_clock.durationToNextSlot().
Move type declarations from beacon_rest_api to json_rest_serialization.
Fix seq[ValidatorIndex] serialization.
Refactor ValidatorPool and add some utility procedures.
Create separate version of validator_client.
* Post-rebase fixes.
Remove CookedPubKey from validator_pool.nim.
* Now we should be able to produce attestations and aggregate and proofs.
But its not working yet.
* Debugging attestation sending.
* Add durationToNextAttestation.
Optimize some debug logs.
Fix aggregation_bits encoding.
Bump chronos/presto.
* Its alive.
* Fixes for launch_local_testnet script.
Bump chronos.
* Switch client API to not use `/api` prefix.
* Post-rebase adjustments.
* Fix endpoint for publishBlock().
* Add CONFIG_NAME.
Add more checks to ensure that beacon_node is compatible.
* Add beacon committee subscription support to validator_client.
* Fix stacktrace should be an array of strings.
Fix committee subscriptions should not be `data` keyed.
* Log duration to next block proposal.
* Fix beacon_node_status import.
* Use jsonMsgResponse() instead of jsonError().
* Fix graffityBytes usage.
Remove unnecessary `await`.
Adjust creation of SignedBlock instance.
Remove legacy files.
* Rework durationToNextSlot() and durationToNextEpoch() to use `fromNow`.
* Fix race condition for block proposal and attestations for same slot.
Fix local_testnet script to properly kill tasks on Windows.
Bump chronos and nim-http-tools, to allow connections to infura.io (basic auth).
* Catch services errors.
Improve performance of local_testnet.sh script on Windows.
Fix race condition when attestation producing.
* Post-rebase fixes.
* Bump chronos and presto.
* Calculate block publishing delay.
Fix pkill in one more place.
* Add error handling and timeouts to firstSuccess() template.
Add onceToAll() template.
Add checkNodes() procedure.
Refactor firstSuccess() template.
Add error checking to api.nim calls.
* Deprecated usage onceToAll() for better stability.
Address comment and send attestations asap.
* Avoid unnecessary loop when calculating minimal duration.
* Implement split preset/config support
This is the initial bulk refactor to introduce runtime config values in
a number of places, somewhat replacing the existing mechanism of loading
network metadata.
It still needs more work, this is the initial refactor that introduces
runtime configuration in some of the places that need it.
The PR changes the way presets and constants work, to match the spec. In
particular, a "preset" now refers to the compile-time configuration
while a "cfg" or "RuntimeConfig" is the dynamic part.
A single binary can support either mainnet or minimal, but not both.
Support for other presets has been removed completely (can be readded,
in case there's need).
There's a number of outstanding tasks:
* `SECONDS_PER_SLOT` still needs fixing
* loading custom runtime configs needs redoing
* checking constants against YAML file
* yeerongpilly support
`build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG`
* load fork epoch from config
* fix fork digest sent in status
* nicer error string for request failures
* fix tools
* one more
* fixup
* fixup
* fixup
* use "standard" network definition folder in local testnet
Files are loaded from their standard locations, including genesis etc,
to conform to the format used in the `eth2-networks` repo.
* fix launch scripts, allow unknown config values
* fix base config of rest test
* cleanups
* bundle mainnet config using common loader
* fix spec links and names
* only include supported preset in binary
* drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
We generally send out attestations 250 ms after the block arrives.
Recent efficiency improvements have led to a slightly increased
incidence of "slot 0" issues where attestations are dropped by other
nodes because they have not yet had time to process the block due to
epoch processing taking time.
This PR mitigates the problem by increasing the window between receiving
the block and sending out attestations.
* Implement the new Altair req/resp protocols
Also fixes the altair message-id computation by providing the correct
forkdigest prefix in `isAltairTopic`.
Co-authored-by: Tanguy Cizain <tanguycizain@gmail.com>
We generally send out attestations 250 ms after the block arrives.
Recent efficiency improvements have led to a slightly increased
incidence of "slot 0" issues where attestations are dropped by other
nodes because they have not yet had time to process the block due to
epoch processing taking time.
This PR mitigates the problem by increasing the window between receiving
the block and sending out attestations.
* add blockchain_dag altair database reading; add rollback tests; fix some unnecessary type conversions
* remove debugging scaffolding
* proposeSignedBlock() will need to be async for merge; introduce altair types to VC
* introduce immutable Altair BeaconState
* add database support for Altair blocks and states
* add tests for Altair get/put/contains/delete state
* enable blockchain_dag Altair state database storing
* properly return error on getting missing altair block
* add Altair support to the block quarantine
* switch some spec/datatypes imports to spec/datatypes/base
* add Altair support to block_clearance
* allow runtime configuration of Altair transition slot
* enable Altair in block_sim, including in CI
* remove false OnBlockAdded dependency on phase.HashedBeaconState
* introduce altair data types into block_clearance; update some alpha.6 spec refs to alpha.7; add get_active_validator_indices_len ForkedHashedBeaconState wrapper
* switch many modules from using datatypes (with phase0 states/blocks) to datatypes/base (fork-independent); update spec refs from alpha.6 to alpha.7 and remove rm'd G2_POINT_AT_INFINITY
* switch more modules from using datatypes (with phase0 states/blocks) to datatypes/base (fork-independent); update spec refs from alpha.6 to alpha.7
* remove unnecessary phase0-only wrapper of get_attesting_indices(); allow signatures_batch to process either fork; remove O(n^2) nested loop in process_inactivity_updates(); add altair support to getAttestationsforTestBlock()
* add Altair versions of asSigVerified(), asTrusted(), and makeBeaconBlock()
* fix spec URL to be Altair for Altair makeBeaconBlock()
* strawman doppelganger detection walltime refactor
* move DoppelgangerProtection to Eth2Processor
* increase comment precision
* document difference between broadcastStartEpoch and nodeLaunchSlot, and allow for one-slot overlap to avoid false positives on intra-slot restarts
* strawman doppelganger detection walltime refactor
* move DoppelgangerProtection to Eth2Processor
* increase comment precision
* document difference between broadcastStartEpoch and nodeLaunchSlot, and allow for one-slot overlap to avoid false positives on intra-slot restarts
* update to Altair as of v1.1.0-alpha.7
* introduce Altair types into attestation pool
* avoid allocating/copying pubkeys excessively in get_next_sync_committee()
* use ForkedHashedBeaconState in StateData
* fix FAR_FUTURE_EPOCH -> slot overflow; almost always use assign()
* avoid stack allocation in maybeUpgradeStateToAltair()
* create and use dispatch functions for check_attester_slashing(), check_proposer_slashing(), and check_voluntary_exit()
* use getStateRoot() instead of various state.data.hbsPhase0.root
* remove withStateVars.hashedState(), which doesn't work as a design anymore
* introduce spec/datatypes/altair into beacon_chain_db
* fix inefficient codegen for getStateField(largeStateField)
* state_transition_slots() doesn't either need/use blocks or runtime presets
* combine process_slots(HBS)/state_transition_slots(HBS) which differ only in last-slot htr optimization
* getStateField(StateData, ...) was replaced by getStateField(ForkedHashedBeaconState, ...)
* fix rollback
* switch some state_transition(), process_slots, makeTestBlocks(), etc to use ForkedHashedBeaconState
* remove state_transition(phase0.HashedBeaconState)
* remove process_slots(phase0.HashedBeaconState)
* remove state_transition_block(phase0.HashedBeaconState)
* remove unused callWithBS(); separate case expression from if statement
* switch back from nested-ref-object construction to (ref Foo)(Bar())
* write uncompressed validator keys to database
Loading 150k+ validator keys on startup in compressed format takes a lot
of time - better store them in uncompressed format which makes behaviour
just after startup faster / more predictable.
* refactor cached validator key access
* fix isomorphic cast to work with non-var instances
* remove cooked pubkey cache - directly use database cache in chaindag
as well (one less cache to keep in sync)
* bump blscurve, introduce loadValid for known-to-be-valid keys
* load the cache of the current state epoch instead of the target state
epoch, when applying states and slots
* load state cache for each slot/block (for longer slot jumps)
* load state cache after full updateStateData
* look up two state cache epochs, instead of the same epoch twice :)
Instead of keeping a validator key list per EpochRef, this PR introduces
a single shared validator key list in ChainDAG, and cleans up some other
ChainDAG and key-related issues.
The PR does not introduce the validator key list in the state transition
- this is because we batch-check all signatures before entering the spec
code, thus the spec code never hits the cache.
A future refactor should _probably_ remove the threadvar altogether.
There's a few other small fixes in here that make the flow easier to
read:
* fix `var ChainDAGRef` -> `ChainDAGRef`
* fix `var QuarantineRef` -> `QuarantineRef`
* consistent `dag` variable name
* avoid using threadvar pubkey cache in most cases
* better error messages in batch signature checking
* update ChainDAG.effective_balance() to use StateData; rm unused ChainDAG.getBlockByPreciseSlot()
* update get_effective_balances to avoid god object; avoid most memory allocation in Altair epoch reward and penalty processing
* don't consider legacy database when writing state - this read is slow
on kvstore
* avoid epoch transition when there's an exact match in cache already
* simplify init to only consider checkpoint states
This way we perform the expensive epoch processing before the block
arrives.
Of course, this may lead to speculative misses which in turn lead to
replays - it's likely that in the case of a miss, we'll see a replay
regardless.
* gossip_to_consensus -> block_processor (it's processing only blocks,
but not only from gossip)
* measure queue and validation time for blocks
* measure assignment and state loading times for updateStateData
* avoid some unnecessary block copies in block sync
* warn that database is corrupt if we hit tail without a state
* proposed structure for hf1
* refactor datatypes.nim into datatypes/{base, phase0, hf1}.nim
* hf1 is Altair
* some syncing with alpha 2
* adjust epoch processing to disambiguate access to RewardFlags
* relocate StateData to stay consistent with meaning phase 0 StateData
* passes v1.1.0 alpha 5 SSZ consensus object tests
* Altair block header test fixtures work
* fix slash_validator() so that Altair attester slashings, proposer slashings, and voluntary exit textures work
* deposit operation Altair test fixtures work
* slot sanity and all but a couple epoch transition tests switched to Altair
* attestation Altair test fixtures work
* Altair block sanity test fixtures work
* add working altair sync committee tests
* improve workarounds for sum-types-across-modules Nim bug; incorporate SignedBeaconBlock root reconstuction to SSZ byte reader
This reverts commit eebc828778.
Adding a separate file turns out not to be enough. This PR reverts the
separate file change.
Another theory is that the large kvstore table causes cache thrashing -
all database connections share a common page cache which would explain
the poor performance of the separate file solution.
The V1 table structure shows great improvements in performance, but if
there's an old `kvstore` without rowid:s, these benefits are nullified:
reorgs during writes and deletes remain expensive (even if the
degradation is reduced somewhat).
This PR creates the tables in a new file instead, and uses the old file
as a read-only store - this has several interesting properties:
* the old database is left completely untouched - this guarantees that
downgrades work smooth (they'll only need to resync their missing
portions)
* starting sync after this PR means only a v1 database is created
* v0 databases stick around - no migration is performed (for now)
Future PR:s can introduce migration of the data from one database to
another - a simply copy will take hours which is downtime we want to
avoid - at that point, it might make sense to migrate straight to era
files instead.
* use StateData in place of BeaconState outside state transition code
* propagate more StateData usage
* remove withStateVars().state
* wrap get_beacon_committee(BeaconState, ...) as gbc(StateData, ...)
* switch makeAttestation() to use StateData
* use StateData wrapper/dispatcher for get_committee_count_per_slot()
* convert AttestationCache.init(), weak subjectivity functions, and updateValidatorMetrics()
* add get_shuffled_active_validator_indices(StateData) and get_block_root_at_slot(StateData)
* switch makeAttestationData() to StateData
* sync AllTests-mainnet.md after rebase
* Error when specifying an invalid --data-dir (or --validator-dir)
* Error when entering an invalid validator public key (e.g. invalid hex value)
* Warning when attempting to export a validator not present in the local database
Some unnecessary remains of the v1 mode has been removed as well
* Revert "Revert "Upgrade database schema" (#2570)"
This reverts commit 6057c2ffb4.
* ssz: fix loading empty lists into existing instances
Not a problem earlier because we didn't reuse instances
* bump nim-eth
* bump nim-web3
The `kvstore` design we're using now turns out to not be the best way to
use `sqlite` - in particular, there are some significant benefits to
using rowid in certain situations and to keep data in separate tables.
With this branch, there are massive improvements in startup time
(seconds instead of minutes) and state/block storage and pruning times
(milliseconds instead of seconds) - these improvements can in particular
be seen on slow drives and translate directly into better attestation
performance.
* update kvstore to new keyspace design
* remove `DirStoreRef` and the hidden `--state-db-kind` option - this
was an experiment to store large blobs in files, but with the new
kvstore, there's no compelling reason to do so
* remove `DbMap` - unused and would need updating for new keyspace
design
* introduce separate tables for each data type (blocks, states etc)
* remove "WITHOUT ROWID" pessimization for tables with large blobs
* close DbSeq statements explicitly (and earlier)
* store beacon block summaries in separate table, without SSZ
compression and load them all with single query on startup
* stop storing backwards compat full states
* mark genesis beacon block as trusted
* avoid faststreams when loading SSZ data
* remove `DisagreementBehavior` (unused)
tersec
Jacek Sieka
Eugene Kabanov
Tanguy Cizain
zah
Kim De Mey
nbc-bump-bot[bot]
Ștefan Talpalaru
Mamy André-Ratsimbazafy
Johann Bauer