* handle one of the `ProveField` warnings
When assigning between `ForkyHashedBeaconState`, suppress `ProveField`
warning, as `tgt.kind == src.kind` was already checked, but compiler
doesn't understand that (as we only `case tgt.kind`).
* Update beacon_chain/spec/forks.nim
* Update beacon_chain/spec/forks.nim
`SyncCommitteeMsgPool` grouped messages by their `beacon_block_root`.
This is problematic around sync committee period boundaries and forks.
Around sync committee period boundaries, members from both the current
and next sync committee may sign the same `beacon_block_root`; mixing
the signatures from both committees together is a mistake. Likewise,
around fork transitions, the `signing_root` changes, so those messages
also need to be segregated.
When an uncached `ShufflingRef` is requested, we currently replay state
which can take several seconds. Acceleration is possible by:
1. Start from any state with locked-in `get_active_validator_indices`.
Any blocks / slots applied to such a state can only affect that
result for future epochs, so are viable for querying target epoch.
`compute_activation_exit_epoch(state.slot.epoch) > target.epoch`
2. Determine highest common ancestor among `state` and `target.blck`.
At the ancestor slot, same rules re `get_active_validator_indices`.
`compute_activation_exit_epoch(ancestorSlot.epoch) > target.epoch`
3. We now have a `state` that shares history with `target.blck` up
through a common ancestor slot. Any blocks / slots that the `state`
contains, which are not part of the `target.blck` history, affect
`get_active_validator_indices` at epochs _after_ `target.epoch`.
4. Select `state.randao_mixes[N]` that is closest to common ancestor.
Either direction is fine (above / below ancestor).
5. From that RANDAO mix, mix in / out all RANDAO reveals from blocks
in-between. This is just an XOR operation, so fully reversible.
`mix = mix xor SHA256(blck.message.body.randao_reveal)`
6. Compute the attester dependent slot from `target.epoch`.
`if epoch >= 2: (target.epoch - 1).start_slot - 1 else: GENESIS_SLOT`
7. Trace back from `target.blck` to the attester dependent slot.
We now have the destination for which we want to obtain RANDAO.
8. Mix in all RANDAO reveals from blocks up through the `dependentBlck`.
Same method, no special handling necessary for epoch transitions.
9. Combine `get_active_validator_indices` from `state` at `target.epoch`
with the recovered RANDAO value at `dependentBlck` to obtain the
requested shuffling, and construct the `ShufflingRef` without replay.
* more tests and simplify logic
* test with different number of deposits per branch
* Update beacon_chain/consensus_object_pools/blockchain_dag.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
* `commonAncestor` tests
* lint
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* fix SSZ response for `produceBlindedBlock`
In `produceBlindedBlock`, we sent the `ForkedBlindedBeaconBlock` when
requested to reply in SSZ format. However, expected result is just the
inner `ForkyBlindedBeaconBlock` together with `eth-consensus-version`.
Note: We do not use SSZ format in our VC for this endpoint at this time,
which explains why we haven't noticed earlier.
* fix Altair/Phase0
* final portion of non-trivial v1.3.0 bumps
Updates unchanged logic to latest v1.3.0 consensus-specs refs,
and cleans up surrounding sections / syncs comments, and so on.
```
https://github.com/ethereum/consensus-specs/(blob|tree)/(?!v1\.3\.0/)
```
* lint
* linebreak
* cleanup `state_transition_epoch` and bump to v1.3.0
More v1.3.0 consensus-specs bumps, focused on `state_transition_epoch`.
Also fixed `current_epoch` spurious style check warning, and cleanup.
* Update beacon_chain/spec/state_transition_epoch.nim
Make intent clearer about when to expect `bls_to_execution_changes`,
and replace test-time errors with compile-time errors if the field
is renamed or goes away in the future.
We already updated the field order in the actual `ExecutionPayload`,
but in init code and tests / logs etc we still used the old order.
Update those occurrences to also match the field order in the struct.
Furthermore, add `excess_data_gas` to last entry in `test_eth1_monitor`.
The `SAFE_SLOTS_TO_UPDATE_JUSTIFIED` constant is no longer used as the
bouncing attack fix was removed:
https://github.com/ethereum/consensus-specs/pull/3290
Note: Some test networks still define the constant, ignoring the config
constant for now until it is no longer used.
Only comment changes:
- Bump refs to final v1.3.0 spec
- Align documentation style in various `BeaconState` structures
- Add `justification_bits` / `historical_roots` comment from spec
- Remove `previous_justified_checkpoint` from non-phase0 (same as spec)
- Cleanup some `Modified` tags
Add compatibility with https://github.com/ethereum/beacon-APIs/pull/290
to the beacon node. Behaviour when configured with multiple ELs is not
specified; intention suggests to indicate whether all ELs are offline.
Post-Capella, historical roots are computed from historical summaries
instead of being directly stored in the beacon state.
Slightly messy to pass both lists around - this is done to avoid
computing the historical root unnecessarily.
* low attestations during epoch should instafail in CI; dbg -> warn level on newPayload log
* improve newPayload warning message when no valid EL connected
* reduce potential spam; make log spelling more consistent; use fatal/quit
* allow trusted node sync based on LC trusted block root
Extends `trustedNodeSync` with a new `--trusted-block-root` option that
allows initializing a light client. No `--state-id` must be provided.
The beacon node will then use this light client to obtain the latest
finalized state from the remote server in a trust-minimized fashion.
Note that the provided `--trusted-block-root` should be somewhat recent,
and that security precautions such as comparing the state root against
block explorers is still recommended.
* fix
* workaround for `valueOr` limitations
* reduce magic numbers
* digest len > context len for readability
* move `cstring` conversion to caller
* avoid abbreviations
* `return` codestyle
* add `formatIt` for `ForkedLightClientXyz`
Even though the `ForkyLightClientXyz` have `formatIt`, they do not apply
when logging `ForkedLightClientXyz`, leading to large logs at times.
Defining `formatIt` for `ForkedLightClientXyz` fixes this.
* exports not needed
Two fixes to `/eth/v1/debug/fork_choice`:
- `validity` enum is expected to be serialized as string instead of int
- `data` wrapper is not expected for this endpoint
* Refactor nimbus_signing_node to support Unix signals.
* Fix SN unable to close REST server properly.
* Fix `keys`, `deposit` and `validator_registration` endpoints issues.
Add getValidatorExitSignature() and getDepositMessageSignature() to validator_pool.
* Add /reload endpoint and implementation.
Fix signData to not cancel `timer`.
Fix validator_pool should clear attachedValidators table.
* Diva protocol enhancement implementation.
Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* Fix issue when VC unable to detect errors properly and act accordingly.
Switch all API functions used by VC to RestPlainResponse, this allows us to print errors returned by BN servers.
* Fix issue when prepareBeaconCommitteeSubnet() do not perform actions when BN is optimistically synced only.
* Fix Defect issue.
* Fix submit/publish returning `false` when operation was successful.
* Address review comments.
* Fix some client calls unable to receive `execution_optimistic` field, mark BN as OptSynced when such request has been made.
* Adjust warning levels.
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
* Remove use of beacon_block_and_blobs_sidecar topic
This topic goes away with decoupled blocks and blobs.
* remove use of getBeaconBlockAndBlobsSidecarTopic from test
* update nimbus_light_client.nim
This commit removes ForkySignedBeaconBlockMaybeBlobs and all
references. I tried to pull that thread only as little as was needed
to get rid of it. Left a placeholder BlobSidecar array (in lieu of
Opt[BlobsSidecar]) in a few places; this will be used as we rebuild
the decoupled implementation.
* Local sim impovements
* Added support for running Capella and EIP-4844 simulations
by downloading the correct version of Geth.
* Added support for using Nimbus remote signer and Web3Signer.
Use 2 out of 3 threshold signing configuration in the mainnet
configuration and regular remote signing in the minimal one.
* The local testnet simulation can now use a payload builder.
This is currently not activated in CI due to lack of automated
procedures for installing third-party relays or builders.
You are adviced to use mergemock for now, but for most realistic
results, we can create a simple builder based on the nimbus-eth1
codebase that will be able to propose transactions from the regular
network mempool.
* Start the simulation from a merged state. This would allow us
to start removing pre-merge functionality such as the gossip
subsciption logic. The commit also removes the merge-forcing
hack installed after the TTD removal.
* Consolidate all the tools used in the local simulation into a
single `ncli_testnet` binary.
Other changes:
Renamed the `EIP_4844_FORK_*` config constants to `DENEB_FORK_*` as
this matches the latest spec and it's already used in the official
Sepolia config.
* Fix getStateRoot() and getBlockRoot() API functions which should obtain `execution_optimistic` field.
Fix sync committee service to check `execution_optimistic` field of getBlockRoot() response.
* 2nd part.
* Remove presets usage.
* clean up some Nim 1.2 workarounds
* re-add notes about JS backend
* another proc/noSideEffect -> func
* revert ncli/ncli_common.nim changes; 19969 evidently wasn't backported to 1.6
* debug log upon sidecar validation failure
* Fill in signature catch upon SignedBeaconBlockAndBlobsSidecar deser
* Always fill blobssidecar slot and root
* Skip lastFCU when eth1monitor is nil
* fix
* Use cached root
* combine common implementation of LC helpers
Combine replicated helper code from Altair/Capella/EIP4844 into single
`Forky` based implementation. Also convert `template` to `func` to avoid
selection of incorrect overload.
* fix
* eip4844 beacon block proposals
* Don't fetch blobs under minimal preset
@tersec's summary of the issue:
BlobsBundleV1 in the execution API spec assumes a mainnet preset blob
size, where the EIP4844 consensus spec defines
FIELD_ELEMENTS_PER_BLOB: 4 under the minimal preset, which leads to a
Blob having a length of 4 * 32, not 4096 * 32 which BlobsBundleV1
requires.
* Revert unintentional script change
* exit/validatorchange pool includes BLS to execution messages; REST
support for new pool
* catch failed individual futures
* increase BLS changes bound and keep BLS seen consistent with subpool
* deque capacities should be powers of 2
* Refactor block/blobs types
Use type system to enforce invariant that a pre-4844 block cannot have
a sidecar.
* Update beacon_chain/nimbus_beacon_node.nim
Co-authored-by: tersec <tersec@users.noreply.github.com>
* review feedback
Co-authored-by: tersec <tersec@users.noreply.github.com>
When running `nimbus_light_client`, we persist the latest header from
`LightClientStore.finalized_header` in a database across restarts.
Because the data format is derived from the latest `LightClientStore`,
this could lead to data being persisted in pre-release formats.
To enable us to test later `LightClientStore` versions on devnets,
transition to a `ForkedLightClientStore` internally that is only
migrated to newer forks on-demand (instead of starting at latest).
Distinguish between those code locations that need to be updated on each
light client data format change, and those others that should generally
be fine, as long as a valid light client object is processed.
The former are tagged with static assert for `LightClientDataFork.high`.
The latter are changed to `lcDataFork > LightClientDataFork.None` to
indicate that they depend only on presence of any valid object.
Also bundled a few minor cleanups and fixes.
Also add `Forky` type for `LightClientStore` and minor fixes / cleanups.
The light client data structures were changed to accommodate additional
fields in future forks (e.g., to also hold execution data).
There is a minor change to the JSON serialization, where the `header`
properties are now nested inside a `LightClientHeader`.
The SSZ serialization remains compatible.
See https://github.com/ethereum/consensus-specs/pull/3190
and https://github.com/ethereum/beacon-APIs/pull/287
In a future fork, light client data will be extended with execution info
to support more use cases. To anticipate such an upgrade, introduce
`Forky` and `Forked` types, and ready the database schema.
Because the mapping of sync committee periods to fork versions is not
necessarily unique (fork schedule not in sync with period boundaries),
an additional column is added to `period` -> `LightClientUpdate` table.
Introduce (optional) pruning of historical data - a pruned node will
continue to answer queries for historical data up to
`MIN_EPOCHS_FOR_BLOCK_REQUESTS` epochs, or roughly 5 months, capping
typical database usage at around 60-70gb.
To enable pruning, add `--history=prune` to the command line - on the
first start, old data will be cleared (which may take a while) - after
that, data is pruned continuously.
When pruning an existing database, the database will not shrink -
instead, the freed space is recycled as the node continues to run - to
free up space, perform a trusted node sync with a fresh database.
When switching on archive mode in a pruned node, history is retained
from that point onwards.
History pruning is scheduled to be enabled by default in a future
release.
In this PR, `minimal` mode from #4419 is not implemented meaning
retention periods for states and blocks are always the same - depending
on user demand, a future PR may implement `minimal` as well.
When not backfilling all the way to genesis (#4421), it becomes more
useful to start rebuilding the historical indices from an arbitrary
starting point.
To rebuild the index from non-genesis, a state and an unbroken block
history is needed - here, we allow loading the state from an era file
and recreating the history from there onwards.
* speed up partial era state loading
* 60% state replay speedup
* don't use HashList for epoch participation - in addition to the code
currently clearing the caches several times redundantly, clearing has to
be done each block nullifying the benefit (35%)
* introduce active balance cache - computing it is slow due to cache
unfriendliness in the random access pattern and bounds checking and we
do it for every block - this cache follows the same update pattern as
the active validator index cache (20%)
* avoid recomputing base reward several times per attestation (5%)
Applying 1024 blocks goes from 20s to ~8s on my laptop - these kinds of
requests happen on historical REST queries but also whenever there's a
reorg.
* fix test and diffs
* consolidate consensus spec transition test fixtures
* include capella
* consoliate fork test fixtures
* note change in EIP-4844 process_block in alpha.2
Other changes:
* More optimal search for TTD block.
* Add timeouts to all REST requests during trusted node sync.
Fixes#4037
* Removed support for storing a deposit snapshot in the network
metadata.
* Types and scaffolding for EIP-4844
This commit adds the EIP-4844 spec types, and fills in
scaffolding/boilerplate for the use of these types across the repo.
None of the actual EIP-4844 logic is introduced yet.
This follows the pattern used by @tersec when introducing Capella (#4276).
* use eth2-networks fork
* review feedback: add static check EIP4844_FORK_EPOCH == FAR_FUTURE_EPOCH
* review feedback: remove EIP4844 from /eth/v1/config/spec response
* Cleanup / review feedback
* Fix REST test
tersec
Etan Kissling
Zahary Karadjov
henridf
Jacek Sieka
Eugene Kabanov