* make `MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS` configurable
Gnosis uses custom `MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS` to account
for the faster slot timing, so that blobs still remain available for
roughly the same amount of real time.
Also extend REST config endpoint with full config form `v1.4.0-beta.4`,
and extend compatibility checks when loading configs to reduce warnings.
Using trusted node sync currently requires to run two commands -
first the `trustedNodeSync` command to initialize the database,
followed by the regular startup command to continue syncing.
The `trustedNodeSync` options are now also available during regular
startup, and are used when the database is empty to simplify setting up
a new Nimbus beacon node. This also aligns behaviour closer with other
Ethereum consensus implementations.
The new logic only applies if the database has not yet been initialized;
same as before. Also, the database needs to be removed under the same
conditions as before when a fresh sync is desired.
Move KZG trusted setup initialization before `BeaconNode.init` to avoid
edge case where network message is received and processed before crypto
library has been properly initialized. Followup from #4870.
To prepare for calling trusted node sync from the main Nimbus startup
logic, extract the trusted node sync trigger into a separate function.
Further allow passing a pre-opened database, as that will be needed to
check whether trusted node sync needs to be called during regular start.
* ShufflingRef approach to next-epoch validator duty calculation/prediction
* refactor action_tracker.updateActions to take ShufflingRef + beacon_proposers; refactor maybeUpdateActionTrackerNextEpoch to be separate and reused function; add actual fallback logic
* document one possible set of conditions
* check epoch participation flags and inactivity scores to ensure no penalties and MAX_EFFECTIVE_BALANCE to ensure rewards don't matter
* correctly (un)shuffle each proposer index
* remove debugging assertion
We use file descriptors for validators and sockets and might run out of
either on high-validator setups - increasing the limit here is harmless
and avoids a common limiting factor in setup
Co-authored-by: Etan Kissling <etan@status.im>
For symmetry with `forkyState` when using `withState`, and to avoid
problems with shadowing of `blck` when using `withBlck` in `template`,
also rename the injected `blck` to `forkyBlck`.
- https://github.com/nim-lang/Nim/issues/22698
To allow testing https://github.com/ethereum/consensus-specs/issues/3466
add support for selecting fork choice version at launch. This means we
can deploy a different logic when `DENEB_FORK_EPOCH != FAR_FUTURE_EPOCH`
that won't be used on Mainnet.
In `Slot end`, sync duties are reported one slot too late,
because sync committee duties are determined by the next slot
instead of the current one. Address that by taking account of this.
* Add metadata for the Holesky network
* Add copyright banner to the new Nim module
* Working version
* Bump Chronos to fix downloading from Github
* Add checksum check of the downloaded file
* Clean up debugging code and obsolete imports
This PR renames the existing `validator_duties` to `beacon_validators`
and in doing so, names validators running inside the beacon node process
"beacon validators" while those running the VC can be referred to as
"client validators" to disambiguate the two.
The existing `validator_duties` instead takes on a new responsibility:
as a home for logic shared between beacon and client validators - ie
code that provides consistency in implementation and behavior between
the two modes of operation.
Not only does this simplify reasoning about where to put code -it also
reduces the number of dependencies the validator client has from ~5000
to ~3000 modules (!) according to `nim genDepend` significantly reducing
compile times.
When a block is introduced to the system both via REST and gossip at the
same time, we will call `storeBlock` from two locations leading to a
dupliace check race condition as we wait for the EL.
This issue may manifest in particular when using an external block
builder that itself publishes the block onto the gossip network.
* refactor enqueue flow
* simplify calling `addBlock`
* complete request manager verifier future for blobless blocks
* re-verify parent conditions before adding block
among other things, it might have gone stale or finalized between one
call and the other
We currently call `onSlotEnd` whenever all in-BN validator duties are
completed. VC validator duties are not awaited. When `onSlotEnd` is
processed close to the slot start, a VC may therefore miss duties.
Adding a delay before `onSlotEnd` improves this situation.
The logic can be optimized further if `ActionTracker` would track
`knownValidators` from REST separately from in-process ones.
When the requestmanager is busy fetching blocks, the queue might get
filled with multiple entries of the same root - since there is no
deduplication, requests containing the same root multiple times will be
sent out.
Also, because the items sit in the queue for a long time potentially,
the request might be stale by the time that the manager is ready with
the previous request.
This PR removes the queue and directly fetches the blocks to download
from the quarantine which solves both problems (the quarantine already
de-duplicates and is clean of stale information).
Removing the queue for blobs is left for a future PR.
Co-authored-by: tersec <tersec@users.noreply.github.com>
* Initial commit.
* Add algorithm in comment.
Remove delays.
Fix logging statement issues.
Change update from epoch to slot.
* Obtain timestamp earlier.
* Add processing delays into algorithm.
* Fix time offset logging to produce integers instead of strings.
* Address review comments.
* Fix copyright year.
Fix updateStatus().
* Remove fields from Slot start log statement.
Fix issues when BN do not support Nimbus Extensions.
Rename metric name and type change.
* Add beacon role to disable time offset check manually.
We have several modules that import `nim-eth` for the sole purpose of
its `keys.newRng` function. This function is meanwhile a simple wrapper
around `nim-bearssl`'s `HmacDrbgContext.new()`, so the import doesn't
really serve a use anymore. Replace `keys.newRng` with the direct call
to reduce `nim-eth` imports.
Since #3976, CORS functionality is broken. Fix it to work again:
- Use `--rest-allowed-origin` instead of `--keymanager-allowed-origin`
to specify CORS `Access-Control-Allow-Origin` header for beacon-APIs.
- Actually pass CORS config to `nim-presto` once more.
* replace optimisticRoots table with field in BlockRef
* copyright year
* mark finalized blocks as verified on load
* Update beacon_chain/consensus_object_pools/block_dag.nim
Co-authored-by: Etan Kissling <etan@status.im>
* expand non-optimistic block checking to all pre-merge blocks; refactor markBlockVerified to use BlockRef rather than block root and remove superfluous caller in newPayload path replaced by addResolvedHeadBlock BlockRef construction
* don't treat finalized block specially; VALID status is sticky
---------
Co-authored-by: Etan Kissling <etan@status.im>
When doing sync for blocks older than
MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS, we skip the blobs by range
request, but we then pass en empty blob sequence to
validation, which then fails.
To fix this: Use an Option[Blobsidecars] to allow expressing the
distinction between "empty blob sequence" and "blobs unavailable". Use
the latter for "old" blocks, and don't attempt to run blob validation.
`SyncCommitteeMsgPool` grouped messages by their `beacon_block_root`.
This is problematic around sync committee period boundaries and forks.
Around sync committee period boundaries, members from both the current
and next sync committee may sign the same `beacon_block_root`; mixing
the signatures from both committees together is a mistake. Likewise,
around fork transitions, the `signing_root` changes, so those messages
also need to be segregated.
* Incremental pruning
When turning on pruning the first time the current pruning algorithm
will prune the full database at startup. This delays restart
unnecessarily, since all of the pruned space is not needed at once.
This PR introduces incremental pruning such that we will never prune
more than 32 blocks or the sync speed, whichever is higher.
This mode is expected to become default in a follow-up release.
* Kzg: Load trusted setup
* scripts/launch_local_testnet.sh: set FIELD_ELEMENTS_PER_BLOB
* Use right setup file for mainnet/minimal
* Force rebuild
* Add comment explaining why build with -f
Post-Deneb, when the request manager receives a missing block from a
peer, it needs to check if the corresponding blobs are available, and
if so pass them along. If they aren't available, the newly-fetched
block must be put in blobless quarantine (while the blobs are
retrieved, coming in next commit).
The consensus-spec-tests already cover the scenarios of our custom test
runner, so the custom tests can be removed. Also cleans up unused config
flags and related unreachable logic.
* allow trusted node sync based on LC trusted block root
Extends `trustedNodeSync` with a new `--trusted-block-root` option that
allows initializing a light client. No `--state-id` must be provided.
The beacon node will then use this light client to obtain the latest
finalized state from the remote server in a trust-minimized fashion.
Note that the provided `--trusted-block-root` should be somewhat recent,
and that security precautions such as comparing the state root against
block explorers is still recommended.
* fix
* workaround for `valueOr` limitations
* reduce magic numbers
* digest len > context len for readability
* move `cstring` conversion to caller
* avoid abbreviations
* `return` codestyle
Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
* Update sync to use post-decoupling RPCs
blob_sidecars_by_range returns a flat list of sidecars, which must
then be grouped per-slot.
* Add test for groupBlobs
* createBlobs: convert proc to func
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* Remove use of beacon_block_and_blobs_sidecar topic
This topic goes away with decoupled blocks and blobs.
* remove use of getBeaconBlockAndBlobsSidecarTopic from test
* update nimbus_light_client.nim
tersec
Etan Kissling
zah
Eugene Kabanov
Jacek Sieka
henridf
Zahary Karadjov