These use a separate flow, and were previously only registered from the
network
* don't log successes in totals mode (TMI)
* remove `attestation-sent` event which is unused
Backfilling is the process of downloading historical blocks via P2P that
are required to fulfill `GetBlocksByRange` duties - this happens during
both trusted node and finalized checkpoint syncs.
In particular, backfilling happens after syncing to head, such that
attestation work can start as soon as possible.
* Fix SyncQueue initialization procedure.
Remove usage of `awaitne`.
Add cancellation support.
Remove unneeded `sleepAsync()` if peer's head is older than needed.
Add `direction` field to all logs.
Fix syncmanager wedge issue.
Add proper resource cleaning procedure on backward sync finish.
Co-authored-by: cheatfate <eugene.kabanov@status.im>
* Fix REST some rest call signatures and implement a simple API benchmark tool
* Implement #3129 (Optimized history traversals in the REST API)
Other notable changes:
The `updateStateData` procedure in the `blockchain_dag.nim` module is
optimized to not rewind down to the last snapshot state saved in the
database if the supplied input state can be used as a starting point
instead.
* Disallow await in withStateForBlockSlot
Validator monitoring based on and mostly compatible with the
implementation in Lighthouse - tracks additional logs and metrics for
specified validators so as to stay on top on performance.
The implementation works more or less the following way:
* Validator pubkeys are singled out for monitoring - these can be
running on the node or not
* For every action that the validator takes, we record steps in the
process such as messages being seen on the network or published in the
API
* When the dust settles at the end of an epoch, we report the
information from one epoch before that, which coincides with the
balances being updated - this is a tradeoff between being correct
(waiting for finalization) and providing relevant information in a
timely manner)
* move quarantine outside of chaindag
The quarantine has been part of the ChainDAG for the longest time, but
this design has a few issues:
* the function in which blocks are verified and added to the dag becomes
reentrant and therefore difficult to reason about - we're currently
using a stateful flag to work around it
* quarantined blocks bypass the processing queue leading to a processing
stampede
* the quarantine flow is unsuitable for orphaned attestations - these
should also should be quarantined eventually
Instead of processing the quarantine inside ChainDAG, this PR moves
re-queueing to `block_processor` which already is responsible for
dealing with follow-up work when a block is added to the dag
This sets the stage for keeping attestations in the quarantine as well.
Also:
* make `BlockError` `{.pure.}`
* avoid use of `ValidationResult` in block clearance (that's for gossip)
* Add exponential rewind on MissingParent.
* Try to avoid peers which are useless for syncing.
Fix forward sync restart at proper point.
Fix getLocalWallSlot() to not return slots from the future.
* Fix incorrect logs.
* Fix logging.
Enable peer's status messages log on DEBUG level.
* Fix watch task to monitor operation progress, but not local head progress.
* Add more logging information.
Remove recurring failures detection mechanism.
* Concentrate all sensitive writeFile/createPath calls in one place.
Fix eth2_network_simulation for Windows.
* Remove artifacts.
* fix import
Co-authored-by: Jacek Sieka <jacek@status.im>
* Fix continuous sync queue rewinds on slow PCs.
Fix recurring disconnects on low peer score.
* Calculate average syncing speed, not the current one.
Move speed calculation to different task.
* Address review comments.
Calculating rewards/penalties is slow due to how we compute sets of
attestations validators then use the sets for inclusion checks, to see
who attested. The dominant function during validated block processing /
epoch processing is hash set building and lookup.
This PR inverts the flow by removing the sets and creating a single
large validator status list, then applying all relevant state
attestations, then updating rewards and penalties.
This provides a 10x speedup to epoch processing which in turn speeds up
both empty slot and block processing - for example, on startup, we
replay all non-finalized blocks to prime fork choice - the same when
validating attestations or replaying states on reorg.
* addPeer() and addPeerNoWait() now returns PeerStatus, not bool.
Minor refactoring of PeerPool.
Fix tests.
* Refactor PeerPool.
Add lenSpace.
Add tests for lenSpace.
PeerPool.add procedures now return different error codes.
Fix SyncManager break/continue problem.
Fix connectWorker break/continue problem.
Refactor connectWorker and discoveryLoop.
Fix incoming/outgoing blocking problem.
* Refactor discovery loop.
Add checkPeer.
* Fix logic and compilation bugs.
* Adjust position of debugging log.
* Fix issue with maximum peers in PeerPool.
Optimize node record decoding.
* fix discoveryLoop.
* Remove aliases and fix tests using aliases.
* Slashing protection + interchange initial commit
* Restrict the when UseSlashingProtection dance in other modules
* Integrate slashing tests in other all_tests
* Add attestation slashing protection support
* Add a message that mention if built with/without slashing protection
* no op the initialization proc
* test slashing protection in Jenkins (temp)
* where to configure NIMFLAGS in Jenkins ...
* Jenkins -> ensure Built with slashing protection
* Add slashing protection complete import
* use Opt.get(otherwise)
* Don't use negation in proc name
* Turn slashing protection on by default
* remove some superfluous gcsafes
* remove getTailState (unused)
* don't store old epochrefs in blocks
* document attestation pool a bit
* remove `pcs =` cruft from log
* skeleton of attester slashing pool & validators
* add skeleton for proposer slashings and voluntary exits; rename pool to more inclusive exit pool to stay consistent with all three; ensure is initialized by beacon_node so is safe to merge, even if it doesn't do much yet
* Syncing workers now not bound to peers.
Sync status is now printed in statusbar.
* Add `SyncQueue.outSlot` to statusbar too.
* Add `inRangeEvent` and `rangeAge` parameter.
* Fix rangeAge is not depends on SyncQueue latest slot.
Fix syncManager to start from latest local head slot.
* Add notInRange event.
* Remove suspects field.
Validator duties proceed slot-by-slot - we should not start a new
validator duty iteration before the previous one is gone or we might run
into consistency and voting issues
This implements disparity, resolving a part of
https://github.com/status-im/nim-beacon-chain/issues/1367
* make BeaconTime a duration for fractional seconds
* factor out attestation/aggregate validation
* simplify recording of queued attestations
* simplify attestation signature check
* fix blocks_received metric
* add some trivial validation tests
* remove unresolved attestation table - attestations for unknown blocks
are dropped instead (cannot verify their signature)
When blocks and attestations arrive, they are SSZ-decoded twice: once
for validation and once for processing. This branch enqueues the decoded
block directly for processing, avoiding the second, slow
deserialization.
* move processing of blocks and attestations to queue
* ...and out from beacon_node
* split attestation processing into attestations and aggregates
* also updates metrics
* clean up logging to better follow the lifetime of gossip: arrival,
validation and processing
* drop attestations and aggregates if there are too many
* try to prioritise blocks and aggregates before single-validator
attestations
* collect all epochrefs in specific blocks to make them easier to find
and to avoid lots of small seqs
* reuse validator key databases more aggressively by comparing keys
* make state cache available from within `withState`
* make epochRef available from within onBlockAdded callback
* integrate getEpochInfo into block resolution and epoch ref logic such
that epochrefs are created when blocks are added to pool or lazily when
needed by a getEpochRef
* fill state cache better from EpochRef, speeding up replay and
validation
* store epochRef in specific blocks to make them easier to find and
reuse
* fix database corruption when state is saved while replaying quarantine
* replay slots fully from block pool before processing state
* compare bls values more smartly
* store epoch state without block applied in database - it's recommended
to resync the node!
this branch will drastically speed up processing in times of long
non-finality, as well as cut memory usage by 10x during the recent
medalla madness.
* initial dynamic subscribe/unsubscribe for attestations to/from subnets
* implement random stability subnet and clean up
* switch from HashSet[uint64] to set[uint8]
* refactor subnet logic out from beacon_node and actual (un)subscribing
* only try to subscribe to marginally different subnets
* add assertions
* maintain ENR subnets
* assert that beacon_node and eth2_network have consistent view of subscribed subnets
* disable actual cycling
this resolves some peer counting issues that were happening because the
lifetime future in PeerInfo was unreliable (multiple PeerInfo instances
existed per peer)
In addition, this solves another race condition: when connecting to a
peer and later dialling that protocol, it is not certain that the same
connection will be used if there's a concurrent incoming peer connection
ongoing - better not make too many assumptions about who sent statuses
when.
* Allow sync manager process blocks one by one.
* Log storeBlock() and updateHead() duration.
* Calculate duration only for blocks added without any error.
* Fix float compilation error.
* Fix duration.
* Fix SyncQueue tests.
* removed the BlockPool type and all of the proxy functions around it - passing the chain DAG and the quarantine explicitly where appropriately - they don't need to be bundled in a type
* fixed the build after the rebase
* more fork-choice fixes
* use target block/epoch to validate attestations
* make addLocalValidators sync
* add current and previous epoch to cache before doing state transition
* update head state using clearance state as a shortcut, when possible
* use blockslot for fork choice balances
* send attestations using epochref cache
* fix invalid finalized parent being used
also simplify epoch block traversal
* single error handling style in fork choice
* import fix, remove unused async
* limit attestations kept in attestation pool
With fork choice updated, the attestation pool only needs to keep track
of attestations that will eventually end up in blocks - we can thus
limit the horizon of attestations that we keep more aggressively.
To get here, we expose getEpochRef which gets metadata about a
particular epochref, and make sure to populate it when a block is added
- this ensures that state rewinds during block addition are minimized.
In addition, we'll use the target root/epoch when validating
attestations - this helps minimize the number of different states that
we need to rewind to, in general.
* remove CandidateChains.justifiedState
unused
* remove BlockPools.Head object
* avoid quadratic quarantine loop
* fix
* fork choice fixes, round 3
* introduce checkpoint tracker
* split out fork choice backend that is independent of dag
* correctly update best checkpoint to use for head selection
* correctly consider wall clock when processing attestations
* preload head history only (only one history is loaded from database
anyway)
* love the DAG
* switch to fork choice v2
also remove BlockRef.children
* fix
* remove cruft
* reenable fork choice and fix several issues
* in addForkChoice_v2, the `.error` field would be accessed even when
Result is ok
* remove workaround for invalid block structure in fork choice
* fix `tmpState` being used recursively in callback, causing state
corruption while processing attestation
* fix block callback being called twice per block
* pass state to callback to avoid unnecessary rewinding
* enable head select, fix another bug
* never use `get` without `isOk`
* log nil blockref in case blockref is nil
* add missing error checking
* use correct epoch when updating attestation message
hash_tree_root was turning up when running beacon_node, turns out to be
repeated hash_tree_root invocations - this pr brings them back down to
normal.
this PR caches the root of a block in the SignedBeaconBlock object -
this has the potential downside that even invalid blocks will be hashed
(as part of deserialization) - later, one could imagine delaying this
until checks have passed
there's also some cleanup of the `cat=` logs which were applied randomly
and haphazardly, and to a large degree are duplicated by other
information in the log statements - in particular, topics fulfill the
same role
Jacek Sieka
zah
tersec
Ștefan Talpalaru
Eugene Kabanov
Viktor Kirilov
Mamy Ratsimbazafy