* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* Local sim impovements
* Added support for running Capella and EIP-4844 simulations
by downloading the correct version of Geth.
* Added support for using Nimbus remote signer and Web3Signer.
Use 2 out of 3 threshold signing configuration in the mainnet
configuration and regular remote signing in the minimal one.
* The local testnet simulation can now use a payload builder.
This is currently not activated in CI due to lack of automated
procedures for installing third-party relays or builders.
You are adviced to use mergemock for now, but for most realistic
results, we can create a simple builder based on the nimbus-eth1
codebase that will be able to propose transactions from the regular
network mempool.
* Start the simulation from a merged state. This would allow us
to start removing pre-merge functionality such as the gossip
subsciption logic. The commit also removes the merge-forcing
hack installed after the TTD removal.
* Consolidate all the tools used in the local simulation into a
single `ncli_testnet` binary.
Other changes:
Renamed the `EIP_4844_FORK_*` config constants to `DENEB_FORK_*` as
this matches the latest spec and it's already used in the official
Sepolia config.
* Working Makefile targets for Capella devnet2
make capella-devnet-2
make clean-capella-devnet-2
You'll need to have https://github.com/tmuxinator/tmuxinator installed.
It's available as a regular package in most Linux distributions or through
Nix or Brew on macOS.
This commit also fixes the initial hang in the Eth1 monitor in the "find
TTD block" procedure through a fix to the network metadata files which
hasn't been upstreamed yet.
Other changes:
* Disabled Geth snap sync in the simulation
When all Geth nodes are configured to run with snap sync enabled, they all
start snap sync after the first forkchoiceUpdated which causes the BNs to
skip validator duties because the EL is syncing. The snap sync never completes
due to poor connectivity between the Geth nodes in the simulation.
Introduce (optional) pruning of historical data - a pruned node will
continue to answer queries for historical data up to
`MIN_EPOCHS_FOR_BLOCK_REQUESTS` epochs, or roughly 5 months, capping
typical database usage at around 60-70gb.
To enable pruning, add `--history=prune` to the command line - on the
first start, old data will be cleared (which may take a while) - after
that, data is pruned continuously.
When pruning an existing database, the database will not shrink -
instead, the freed space is recycled as the node continues to run - to
free up space, perform a trusted node sync with a fresh database.
When switching on archive mode in a pruned node, history is retained
from that point onwards.
History pruning is scheduled to be enabled by default in a future
release.
In this PR, `minimal` mode from #4419 is not implemented meaning
retention periods for states and blocks are always the same - depending
on user demand, a future PR may implement `minimal` as well.
Since the sync committee duties are no longer updated on every slot
and previously the sync committee aggregators selection proofs were
generated during the duties update, this now resulted in the client
using stale selection proofs (they must be generated at each slot).
The fix consists of moving the selection proof generation logic in
a different function which is properly executed on each slot.
Other changes:
* The logtrace tool has been enhanced with a framework for adding
new simpler log aggregation and analysis algorithms.
The default CI testnet simulation will now ensure that the blocks
in the network have reasonable sync committee participation.
To further tighten Nimbus against spam, this PR introduces a global
quota for block requests (shared between peers) as well as a general
per-peer request limit that applies to all libp2p requests.
* apply request quota before decoding message
* for high-bandwidth requests (blocks), apply a shared global quota
which helps manage bandwidth for high-peer setups
* add metrics
When connecting to hosts on shared IP/Port using TLS, SNI must be sent
to allow the remote server to provide the correct TLS certificate.
Bump the `nim-json-rpc` and `nim-websock` dependencies to send SNI ext.
`news` has a few open issues that are not present in `nim-websock`:
1. There is a 1 second delay between each MB of sent data.
2. Cancelling an ongoing `send` makes the entire WebSocket unusable.
3. Control packets do not have priority over ongoing message frames.
Using `news`, there are quite a few of these messages in Geth:
```
Previously seen beacon client is offline. Please ensure it is
operational to follow the chain!
```
It may take quite some time to reconnect when this happens.
Using `nim-websock`, this message still occurs because `eth1_monitor`
reconnects the EL connection when no new blocks occurred for 5 minutes,
but reconnecting is quick and the message is rarer.
When calling `newPayload` on a >1MB payload (can happen post-merge),
`news` splits up that payload into 1MB chunks. The chunks are each sent
individually, though, with `await` in-between. This means that when we
send concurrent `forkChoiceUpdated` calls, that those may end up getting
in-between the `newPayload` chunks, leading to invalid data being sent.
The EL then returns an error message with a `null` `id` entry (as it
could not read the request `id` due to the mangling) and disconnects.
A PR has been submitted to fix this in `news`, and merged into `status`
branch early as this fix is critical for reliable post-merge operation:
https://github.com/Tormund/news/pull/22
* Re-enabled requireAllFields after a fix in nim-json-serialization
The problem was that `Option[T]` fields were not treated as optional
when requireAllFields is set to true. This is now fixed in NJS.
* Add makefile targets for recreating the Jenkins simulation runs
* Fix a discrepancy with the REST spec
Whether new blocks/attestations/etc are produced internally or received
via REST, their journey through the node is the same - to ensure that
they get the same treatment (logging, metrics, processing), this PR
moves the routing to a dedicated module and fixes several small
differences that existed before.
* `xxxValidator` -> `processMessageName` - the processor also was adding
messages to pools, so we want the name to reflect that action
* add missing "sent" metrics for some messages
* document ignore policy better - already-seen messages are not actaully
rebroadcast by libp2p
* skip redundant signature checks for internal validators consistently
This updates `nim-ssz-serialization` to
`3db6cc0f282708aca6c290914488edd832971d61`.
Notable changes:
- Use `uint64` for `GeneralizedIndex`
- Add support for building merkle multiproofs
* Initial commit
* Make `events` API spec compliant.
* Add `Eth-Consensus-Version` in responses.
* Bump chronos to get redirect with headers working.
* Add `is_optimistic` field and handling to syncing RestSyncInfo.
* SSZ `[]` -> `mitem`
* `[]` -> `item`
immutable access via mutable instance cannot rely on template
overloading, and `[]` cannot be a `func` because of special seq handling
in compiler.
Other fixes:
* Fix bit rot in the `make prater-dev-deposit` target.
* Correct content-type in the responses of the Nimbus signing node
* Invalid JSON payload was being sent in the web3signer requests
This PR makes the necessary adjustments to deal with the revamped snappy
API.
In practical terms for nimbus-eth2, there are performance increases to
gossip processing, database reading and writing as well as era file
processing. Exporting `.era` files for example, a snappy-heavy
operation, almost halves in total processing time:
Pre:
```
Average, StdDev, Min, Max, Samples, Test
39.088, 8.735, 23.619, 53.301, 50, tState
237.079, 46.692, 165.620, 355.481, 49, tBlocks
```
Post:
```
All time are ms
Average, StdDev, Min, Max, Samples, Test
25.350, 5.303, 15.351, 41.856, 50, tState
141.238, 24.164, 99.990, 199.329, 49, tBlocks
```
Some upstream repos still need fixes, but this gets us close enough that
style hints can be enabled by default.
In general, "canonical" spellings are preferred even if they violate
nep-1 - this applies in particular to spec-related stuff like
`genesis_validators_root` which appears throughout the codebase.
rocksdb was never actually used in nimbus-eth2 and existed only to satisfy nim-eth dependencies for test running - these have since moved to nimbus-eth1.
* bump nim-eth
`.era` files and Req/Resp protocols use framed formats - aligning the
database with these makes for less recompression work overall as gossip
is sent only once while req/resp repeats (potentially) - this also
allows efficient pruning-to-era where snappy-recompression is the major
cycle thief.
Changes in nim-eth relevant to nimbus-eth2:
- Style fixes according to --styleCheck:usages (#452)
- Add discoveryv5 session metrics (#454)
- Don’t use exceptions for enr get call (#453)
- Add DiscoveryConfig to tune routing table ip limits and bitPerHops
- More --styleCheck fixes for discoveryv5 and eth/common (#473)
The added options work in opt-in fashion. If they are not specified,
the server will respond to all requests as if the CORS specification
doesn't exist. This will result in errors in CORS-enabled clients.
Please note that future versions may support more than one allowed
origin. The option names will stay the same, but the user will be
able to repeat them on the command line (similar to other options
such as --web3-url).
To be documented in the guide in a separate PR.
tersec
Zahary Karadjov
Etan Kissling
zah
virchau13
Jacek Sieka
Philippe Schommers
Eugene Kabanov
henridf
Tanguy
Kim De Mey
Jakub Sokołowski
Mamy Ratsimbazafy
Ivan Yonchovski
Ștefan Talpalaru