When doing sync for blocks older than
MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS, we skip the blobs by range
request, but we then pass en empty blob sequence to
validation, which then fails.
To fix this: Use an Option[Blobsidecars] to allow expressing the
distinction between "empty blob sequence" and "blobs unavailable". Use
the latter for "old" blocks, and don't attempt to run blob validation.
* Update sync to use post-decoupling RPCs
blob_sidecars_by_range returns a flat list of sidecars, which must
then be grouped per-slot.
* Add test for groupBlobs
* createBlobs: convert proc to func
While syncing the finalized portion of the chain, the execution client
cannot efficiently sync and most of the time returns `SYNCING` - in this
PR, we use CL-verified optmistic sync as long as the block is claimed to
be finalized, only occasionally updating the EL with progress.
Although a peer might lie about what is finalized and what isn't,
eventually we'll call the execution client - thus, all a dishonest
client can do is delay execution verification slightly. Gossip blocks in
particular are never assumed to be finalized.
When backfilling, we only need to download blocks that are newer than
MIN_EPOCHS_FOR_BLOCK_REQUESTS - the rest cannot reliably be fetched from
the network and does not have to be provided to others.
This change affects only trusted-node-synced clients - genesis sync
continues to work as before (because it needs to construct a state by
building it from genesis).
Those wishing to complete a backfill should do so with era files
instead.
The various `PeerScore` constants are used for both beacon blocks and
LC objects, and will likely also find use for EIP4844 blob sidecars.
Renaming them to use more generically applicable names not referring
to blocks explicitly aymore.
We currently use `BlockError` for both beacon blocks and LC objects.
In light of EIP4844, we will likely also use it for blob sidecars.
To avoid confusion, renaming it to a more generic `VerifierError`,
and update its documentation to be more generic.
To avoid long lines as a followup, also renaming the `block_processor`'s
`BlockProcessingCompleted.completed`->`ProcessingStatus.completed` and
`BlockProcessingCompleted.notCompleted`->`ProcessingStatus.notCompleted`
When the sync queue processes results for a blocks by range request,
and the requested range contained some slots that are already finalized,
`BlockError.MissingParent` currently leads to `PeerScoreBadBlocks` even
when the error occurs on a non-finalized slot in the requested range.
This patch changes the scoring in that case to `PeerScoreMissingBlocks`
for consistency with range requests solely covering non-finalized slots,
and, likewise, rewinds the sync queue to the next `rewindSlot`.
Follows up on https://github.com/status-im/nimbus-eth2/pull/3461 which
ensured that repeated `beaconBlocksByRange` requests get shrinked to
account for potential out-of-band advancements to `safeSlot`, with
similar logic for the initial request.
Some upstream repos still need fixes, but this gets us close enough that
style hints can be enabled by default.
In general, "canonical" spellings are preferred even if they violate
nep-1 - this applies in particular to spec-related stuff like
`genesis_validators_root` which appears throughout the codebase.
When a `beaconBlocksByRange` response advances the `safeSlot`, but later
has errors, the sync queue keeps repeating that same request until it is
fulfilled without errors. Data up through `safeSlot` is considered to be
immutable, i.e., finalized, so re-requesting that data is not useful.
By advancing the sync progress in that scenario, those redundant query
portions can be avoided. Note, the finalized block _itself_ is always
requested, even in the initial request. This behaviour is kept same.
* Refactor and optimize logs.
* Introduce shortLog(SyncRequest).
* Address review comment.
* make sync queue logs more consistent
Adds a few minor logging improvements:
- Fixes a typo (`was happened` -> `has happened`)
- Avoids passing `reset_slot` argument to log statement multiple times
- Uses same `rewind_to_slot` label when logging in both sync directions
- Consistent rewind point logging
Co-authored-by: cheatfate <eugene.kabanov@status.im>
* harden and speed up block sync
The `GetBlockBy*` server implementation currently reads SSZ bytes from
database, deserializes them into a Nim object then serializes them right
back to SSZ - here, we eliminate the deser/ser steps and send the bytes
straight to the network. Unfortunately, the snappy recoding must still
be done because of differences in framing.
Also, the quota system makes one giant request for quota right before
sending all blocks - this means that a 1024 block request will be
"paused" for a long time, then all blocks will be sent at once causing a
spike in database reads which potentially will see the reading client
time out before any block is sent.
Finally, on the reading side we make several copies of blocks as they
travel through various queues - this was not noticeable before but
becomes a problem in two cases: bellatrix blocks are up to 10mb (instead
of .. 30-40kb) and when backfilling, we process a lot more of them a lot
faster.
* fix status comparisons for nodes syncing from genesis (#3327 was a bit
too hard)
* don't hit database at all for post-altair slots in GetBlock v1
requests
* Harden handling of unviable forks
In our current handling of unviable forks, we allow peers to send us
blocks that come from a different fork - this is not necessarily an
error as it can happen naturally, but it does open up the client to a
case where the same unviable fork keeps getting requested - rather than
allowing this to happen, we'll now give these peers a small negative
score - if it keeps happening, we'll disconnect them.
* keep track of unviable forks in quarantine, to avoid filling it with
known junk
* collect peer scores in single module
* descore peers when they send unviable blocks during sync
* don't give score for duplicate blocks
* increase quarantine size to a level that allows finality to happen
under optimal conditions - this helps avoid downloading the same blocks
over and over in case of an unviable fork
* increase initial score for new peers to make room for one more failure
before disconnection
* log and score invalid/unviable blocks in requestmanager too
* avoid ChainDAG dependency in quarantine
* reject gossip blocks with unviable parent
* continue processing unviable sync blocks in order to build unviable
dag
* docs
* Update beacon_chain/consensus_object_pools/block_pools_types.nim
* add unviable queue test
Backfilling is the process of downloading historical blocks via P2P that
are required to fulfill `GetBlocksByRange` duties - this happens during
both trusted node and finalized checkpoint syncs.
In particular, backfilling happens after syncing to head, such that
attestation work can start as soon as possible.
* Fix SyncQueue initialization procedure.
Remove usage of `awaitne`.
Add cancellation support.
Remove unneeded `sleepAsync()` if peer's head is older than needed.
Add `direction` field to all logs.
Fix syncmanager wedge issue.
Add proper resource cleaning procedure on backward sync finish.
Co-authored-by: cheatfate <eugene.kabanov@status.im>
Time in the beacon chain is expressed relative to the genesis time -
this PR creates a `beacon_time` module that collects helpers and
utilities for dealing the time units - the new module does not deal with
actual wall time (that's remains in `beacon_clock`).
Collecting the time related stuff in one place makes it easier to find,
avoids some circular imports and allows more easily identifying the code
actually needs wall time to operate.
* move genesis-time-related functionality into `spec/beacon_time`
* avoid using `chronos.Duration` for time differences - it does not
support negative values (such as when something happens earlier than it
should)
* saturate conversions between `FAR_FUTURE_XXX`, so as to avoid
overflows
* fix delay reporting in validator client so it uses the expected
deadline of the slot, not "closest wall slot"
* simplify looping over the slots of an epoch
* `compute_start_slot_at_epoch` -> `start_slot`
* `compute_epoch_at_slot` -> `epoch`
A follow-up PR will (likely) introduce saturating arithmetic for the
time units - this is merely code moves, renames and fixing of small
bugs.
* SyncManager cleanups for backfill support
Cleanups, fixes and simplifications, in anticipation of backfill support
for the `SyncManager`:
* reformat sync progress indicator to show time left and % done more
prominently:
* old: `sync="sPssPsssss:2:2.4229:00h57m (2706898)"`
* new: `sync="14d12h31m (0.52%) 1.1378slots/s (wQQQQQDDQQ:1287520)"`
* reset average speed when going out of sync
* pass all block errors to sync manager, including duplicate/unviable
* penalize peers for reporting a head block that is outside of our
expected wall clock time (they're likely on a different network or
trying to disrupt sync)
* remove `SyncFailureKind` (unused)
* remove `inRange` (unused)
* add `Q` for sync queue requests that are in the `SyncQueue` but not
yet in the `BlockProcessor` queue
* update last slot in `SyncQueue` after getting peer status
* fix race condition between `wakeupWaiters` and `resetWait`, where
workers would not be correctly reset if block verification returned a
completed future without event loop
* log syncmanager direction
* Fix ordering issue.
Some of the requests size of which are not equal to `chunkSize` could be processed in wrong order which could lead to sync process freezes.
Co-authored-by: cheatfate <eugene.kabanov@status.im>
Agnish Ghosh
tersec
Jacek Sieka
Etan Kissling
henridf
Eugene Kabanov
Miran