To allow testing https://github.com/ethereum/consensus-specs/issues/3466
add support for selecting fork choice version at launch. This means we
can deploy a different logic when `DENEB_FORK_EPOCH != FAR_FUTURE_EPOCH`
that won't be used on Mainnet.
* Add metadata for the Holesky network
* Add copyright banner to the new Nim module
* Working version
* Bump Chronos to fix downloading from Github
* Add checksum check of the downloaded file
* Clean up debugging code and obsolete imports
In Nim 2.0, the `test_fixture_operations` files fail to compile with:
```
Error: 'result' is of type <Result[system.void, system.cstring]> which cannot be captured as it would violate memory safety, declared here: /nimbus-eth2/tests/consensus_spec/bellatrix/test_fixture_operations.nim(130, 5); using '-d:nimNoLentIterators' helps in some cases. Consider using a <ref Result[system.void, system.cstring]> which can be captured.
```
Wrapping the `applyExecutionPayload` in a factory that takes `path`
avoids this problem.
Suite names were not being used because `test` has to have access to it
during instantiation - this PR cleans things up a little while at the
same time upgrading unittest2.
From old interop tests, a mock `eth1BlockHash` was defined in `base`.
To avoid accidental use by Nimbus, move to `tests` and rename it to
`mockEth1BlockHash`.
When a block is introduced to the system both via REST and gossip at the
same time, we will call `storeBlock` from two locations leading to a
dupliace check race condition as we wait for the EL.
This issue may manifest in particular when using an external block
builder that itself publishes the block onto the gossip network.
* refactor enqueue flow
* simplify calling `addBlock`
* complete request manager verifier future for blobless blocks
* re-verify parent conditions before adding block
among other things, it might have gone stale or finalized between one
call and the other
* async batch verification
When batch verification is done, the main thread is blocked reducing
concurrency.
With this PR, the new thread signalling primitive in chronos is used to
offload the full batch verification process to a separate thread
allowing the main threads to continue async operations while the other
threads verify signatures.
Similar to previous behavior, the number of ongoing batch verifications
is capped to prevent runaway resource usage.
In addition to the asynchronous processing, 3 addition changes help
drive throughput:
* A loop is used for batch accumulation: this prevents a stampede of
small batches in eager mode where both the eager and the scheduled batch
runner would pick batches off the queue, prematurely picking "fresh"
batches off the queue
* An additional small wait is introduced for small batches - this helps
create slightly larger batches which make better used of the increased
concurrency
* Up to 2 batches are scheduled to the threadpool during high pressure,
reducing startup latency for the threads
Together, these changes increase attestation verification throughput
under load up to 30%.
* fixup
* Update submodules
* fix blst build issues (and a PIC warning)
* bump
---------
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
This PR removes a few hundred thousand temporary seq allocations during
state transition - in particular, the flag seq was allocated per
validator while committees are computed per attestation.
* Add new REST endpoints to monitor REST server connections and new chronos metrics.
* Bump head versions of chronos and presto.
* Bump chronos with regression fix.
* Remove outdated tests which was supposed to test pipeline mode.
* Disable pipeline mode in resttest.
* Update copyright year.
* Upgrade test_signing_node to start use AsyncProcess instead of std library's osproc.
Bump chronos to check graceful shutdown.
* Update AllTests.
* Bump chronos.
Split up the `ShufflingRef` acceleration logic into generically usable
parts and attester shuffling specific parts. The generic parts could be
used to accelerate other purposes, e.g., REST `/states/xxx/randao` API.
To enable additional use cases, e.g., `/states/###/randao` beacon API,
`ShufflingRef` acceleration logic needs to be able to operate on parts
of the DAG that do not have `BlockRef`. Changing `commonAncestor` to
act on `BlockId` instead of `BlockRef` is a step toward that and also
simplifies the logic some more.
Post-merge blocks contain all information to directly obtain RANDAO
without having to load any additional info. Take advantage of that to
further accelerate `ShufflingRef` computation. Note that it is still
necessary to verify that `blck` / `state` share a sufficiently recent
ancestor for the purpose of computing attester shufflings.
- new: 243.71s, 239.67s, 237.32s, 238.36s, 239.57s
- old: 251.33s, 234.29s, 249.28s, 237.03s, 236.78s
Running `makeTestDB` in tests currently always initializes DB with a
`phase0` state, preventing tests that configure a fork schedule that
starts in a different fork from working properly. Fix that by upgrading
the genesis state to whatever fork the fork schedule starts with.
Current RANDAO recovery logic is quite complex as it optimizes for the
minimum amount of database reads. Loading blocks isn't the bottleneck
though, so rather make the implementation more concise by avoiding the
complex strategy planning step. Note that this also prepares for an even
faster implementation for post-merge blocks in the future that extracts
RANDAO from `ExecutionPayload` directly if available, so even in cases
where efficiency is slightly lower, only historical data is affected.
`time nim c -r tests/test_blockchain_dag` (cached binary):
- new: 145.45s, 133.59s, 144.65s, 127.69s, 136.14s
- old: 149.15s, 150.84s, 135.77s, 137.49s, 133.89s
When the requestmanager is busy fetching blocks, the queue might get
filled with multiple entries of the same root - since there is no
deduplication, requests containing the same root multiple times will be
sent out.
Also, because the items sit in the queue for a long time potentially,
the request might be stale by the time that the manager is ready with
the previous request.
This PR removes the queue and directly fetches the blocks to download
from the quarantine which solves both problems (the quarantine already
de-duplicates and is clean of stale information).
Removing the queue for blobs is left for a future PR.
Co-authored-by: tersec <tersec@users.noreply.github.com>
* early exit `commonAncestor` when comparing with `finalizedHead`
As all `BlockRef` lead to `finalizedHead` (`parent == nil`),
can shortcut in that situation and immediately return `finalizedHead`
if passed as one of the arguments.
* typo in comment
* add test from #5152
Co-authored-by: tersec <tersec@users.noreply.github.com>
* add note about test complexity
* regenerate test summary
---------
Co-authored-by: tersec <tersec@users.noreply.github.com>
We have several modules that import `nim-eth` for the sole purpose of
its `keys.newRng` function. This function is meanwhile a simple wrapper
around `nim-bearssl`'s `HmacDrbgContext.new()`, so the import doesn't
really serve a use anymore. Replace `keys.newRng` with the direct call
to reduce `nim-eth` imports.
* require sync committee supermajority in CI
To better catch problems with sync committee messages in CI, extend
local testnet simulation to also verify that each block is signed
by a supermajority of the sync committee.
Requires #5083 and #5084
* lint
`produceSyncAggregate` is called in new slot when block is produced,
while the other functions in `sync_committee_msg_pool` are called in
previous slot. So, need to subtract 1 slot when producing sync aggregate
to accept the signatures using the old digest during fork transition.
* Refactor api.nim to provide more informative failure reasons.
Distinct between unexpected data and unexpected code.
Deprecate Option[T] usage.
* Fix 400 for produceBlindedBlock().
Get proper string conversion for strategy.
* Fix SSZ encoded versions of ProduceBlockResponseV2, ProduceBlockResponseV2 can be received and decoded.
Fix done() warnings.
Bump presto.
* Fix compilation error with new presto.
Use TcpNoDelay option for Web3Signer.
* Fix produceBlockV2() should provide SSZ responses too.
* Address block encoding issue.
* Fix signing test.
* Bump presto.
* Address review comments.
* also pack attestations where LMD vote is orphaned
When `attestation.data.beacon_block_root` gets orphaned, attestations
with a good `attestation.data.target.root` may still be valuable.
The LMD GHOST vote is not relevant for attestation rewards.
Switch to use the FFG vote (`attestation.data.target.root`) instead,
gossip validation ensures it is an ancestor of `beacon_block_root`.
* lint
* Clarify addOrphan error/logging
addOrphan returned a bool to indicate success. Change this to a Result
so that different errors can be distinguished.
* Update beacon_chain/consensus_object_pools/block_quarantine.nim
Co-authored-by: tersec <tersec@users.noreply.github.com>
* Update beacon_chain/gossip_processing/gossip_validation.nim
---------
Co-authored-by: tersec <tersec@users.noreply.github.com>
When doing sync for blocks older than
MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS, we skip the blobs by range
request, but we then pass en empty blob sequence to
validation, which then fails.
To fix this: Use an Option[Blobsidecars] to allow expressing the
distinction between "empty blob sequence" and "blobs unavailable". Use
the latter for "old" blocks, and don't attempt to run blob validation.
`SyncCommitteeMsgPool` grouped messages by their `beacon_block_root`.
This is problematic around sync committee period boundaries and forks.
Around sync committee period boundaries, members from both the current
and next sync committee may sign the same `beacon_block_root`; mixing
the signatures from both committees together is a mistake. Likewise,
around fork transitions, the `signing_root` changes, so those messages
also need to be segregated.
* don't run flaky CI in Windows
* reduce stack size in `test_light_client`
* regen tests
* re-enable maybe non-problematic test module on Windows
---------
Co-authored-by: Etan Kissling <etan@status.im>
When an uncached `ShufflingRef` is requested, we currently replay state
which can take several seconds. Acceleration is possible by:
1. Start from any state with locked-in `get_active_validator_indices`.
Any blocks / slots applied to such a state can only affect that
result for future epochs, so are viable for querying target epoch.
`compute_activation_exit_epoch(state.slot.epoch) > target.epoch`
2. Determine highest common ancestor among `state` and `target.blck`.
At the ancestor slot, same rules re `get_active_validator_indices`.
`compute_activation_exit_epoch(ancestorSlot.epoch) > target.epoch`
3. We now have a `state` that shares history with `target.blck` up
through a common ancestor slot. Any blocks / slots that the `state`
contains, which are not part of the `target.blck` history, affect
`get_active_validator_indices` at epochs _after_ `target.epoch`.
4. Select `state.randao_mixes[N]` that is closest to common ancestor.
Either direction is fine (above / below ancestor).
5. From that RANDAO mix, mix in / out all RANDAO reveals from blocks
in-between. This is just an XOR operation, so fully reversible.
`mix = mix xor SHA256(blck.message.body.randao_reveal)`
6. Compute the attester dependent slot from `target.epoch`.
`if epoch >= 2: (target.epoch - 1).start_slot - 1 else: GENESIS_SLOT`
7. Trace back from `target.blck` to the attester dependent slot.
We now have the destination for which we want to obtain RANDAO.
8. Mix in all RANDAO reveals from blocks up through the `dependentBlck`.
Same method, no special handling necessary for epoch transitions.
9. Combine `get_active_validator_indices` from `state` at `target.epoch`
with the recovered RANDAO value at `dependentBlck` to obtain the
requested shuffling, and construct the `ShufflingRef` without replay.
* more tests and simplify logic
* test with different number of deposits per branch
* Update beacon_chain/consensus_object_pools/blockchain_dag.nim
Co-authored-by: Jacek Sieka <jacek@status.im>
* `commonAncestor` tests
* lint
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
`attachMerkleProofs` is used by `mockUpdateStateForNewDeposit` to create
a single deposit. The function doesn't work correctly when trying with
with multiple deposits, though. Fix this to enable more complex tests,
and also return the `deposit_root` for forming matching `Eth1Data`.
We already updated the field order in the actual `ExecutionPayload`,
but in init code and tests / logs etc we still used the old order.
Update those occurrences to also match the field order in the struct.
Furthermore, add `excess_data_gas` to last entry in `test_eth1_monitor`.
Back then, Milagro interop used offset 1000 for mock BLS keys.
Meanwhile, interop code was removed and multi client testnets are there.
EF tests use an offset of 1 for mock BLS keys. This patch aligns our
implementation to also use offset of 1, potentially making debugging of
state differences a bit easier (but, ultimately, low impact).
Furthermore, simulation files are now emitted into a subdirectory
to have less chunk in the repo root directory, and to avoid conflicts
where a cached file with offset 1000 runs against tests expecting 1.
See https://github.com/status-im/nimbus-eth2/pull/2928/files#r719266863
The consensus-spec-tests already cover the scenarios of our custom test
runner, so the custom tests can be removed. Also cleans up unused config
flags and related unreachable logic.
* Simplify block quarantine blobless
The quarantine blobless table was initially keyed off of (Eth2Digest,
ValidatorSig). This was modelled off the orphan table. The presence of
the signature in the key is necessary for orphans, because we can't
verify the signature for an orphan. That is not the case for a
blobless block, where the signature can be verified.
So this PR changes the blobless block table to be keyed off a
Eth2Digest only. This simplifies the retrieval and handling of
blobless blocks.
* review feedback
* fix false positive getopt failure with multiple getopt matches in searched path
* also get launch_local_testnet
* also make_prometheus_config, called from launch_local_testnet
* Refactor nimbus_signing_node to support Unix signals.
* Fix SN unable to close REST server properly.
* Fix `keys`, `deposit` and `validator_registration` endpoints issues.
Add getValidatorExitSignature() and getDepositMessageSignature() to validator_pool.
* Add /reload endpoint and implementation.
Fix signData to not cancel `timer`.
Fix validator_pool should clear attachedValidators table.
* Diva protocol enhancement implementation.
Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
* Update sync to use post-decoupling RPCs
blob_sidecars_by_range returns a flat list of sidecars, which must
then be grouped per-slot.
* Add test for groupBlobs
* createBlobs: convert proc to func
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* Remove use of beacon_block_and_blobs_sidecar topic
This topic goes away with decoupled blocks and blobs.
* remove use of getBeaconBlockAndBlobsSidecarTopic from test
* update nimbus_light_client.nim
This commit removes ForkySignedBeaconBlockMaybeBlobs and all
references. I tried to pull that thread only as little as was needed
to get rid of it. Left a placeholder BlobSidecar array (in lieu of
Opt[BlobsSidecar]) in a few places; this will be used as we rebuild
the decoupled implementation.
* Local sim impovements
* Added support for running Capella and EIP-4844 simulations
by downloading the correct version of Geth.
* Added support for using Nimbus remote signer and Web3Signer.
Use 2 out of 3 threshold signing configuration in the mainnet
configuration and regular remote signing in the minimal one.
* The local testnet simulation can now use a payload builder.
This is currently not activated in CI due to lack of automated
procedures for installing third-party relays or builders.
You are adviced to use mergemock for now, but for most realistic
results, we can create a simple builder based on the nimbus-eth1
codebase that will be able to propose transactions from the regular
network mempool.
* Start the simulation from a merged state. This would allow us
to start removing pre-merge functionality such as the gossip
subsciption logic. The commit also removes the merge-forcing
hack installed after the TTD removal.
* Consolidate all the tools used in the local simulation into a
single `ncli_testnet` binary.
* restore doppelganger check on connectivity loss
https://github.com/status-im/nimbus-eth2/pull/4398 introduced a
regression in functionality where doppelganger detection would not be
rerun during connectivity loss. This PR reintroduces this check and
makes some adjustments to the implementation to simplify the code flow
for both BN and VC.
* track when check was last performed for each validator (to deal with
late-added validators)
* track when we performed a doppel-detectable activity (attesting) so as
to avoid false positives
* remove nodeStart special case (this should be treated the same as
adding a validator dynamically just after startup)
* allow sync committee duties in doppelganger period
* don't trigger doppelganger when registering duties
* fix crash when expected index response is missing
* fix missing slashingSafe propagation
Other changes:
Renamed the `EIP_4844_FORK_*` config constants to `DENEB_FORK_*` as
this matches the latest spec and it's already used in the official
Sepolia config.
We do a linear scan of all pubkeys for each validator and slot - this
becomes expensive with large validator counts.
* normalise BN/VC validator startup logging
* fix crash when host cannot be resolved while adding remote validator
* silence repeated log spam for unknown validators
* print pubkey/index/activation mapping on startup/validator
identification
While syncing the finalized portion of the chain, the execution client
cannot efficiently sync and most of the time returns `SYNCING` - in this
PR, we use CL-verified optmistic sync as long as the block is claimed to
be finalized, only occasionally updating the EL with progress.
Although a peer might lie about what is finalized and what isn't,
eventually we'll call the execution client - thus, all a dishonest
client can do is delay execution verification slightly. Gossip blocks in
particular are never assumed to be finalized.
Extends fork choice state to also track slot numbers to improve accuracy
of `/eth/v1/debug/fork_choice` endpoint. Autoenable this API on devnet,
and disable some extra checks on devnet to aid focused testing efforts.
Align fork choice pruning logic with API based on checkpoints vs root.
* eip4844 beacon block proposals
* Don't fetch blobs under minimal preset
@tersec's summary of the issue:
BlobsBundleV1 in the execution API spec assumes a mainnet preset blob
size, where the EIP4844 consensus spec defines
FIELD_ELEMENTS_PER_BLOB: 4 under the minimal preset, which leads to a
Blob having a length of 4 * 32, not 4096 * 32 which BlobsBundleV1
requires.
* Revert unintentional script change
* exit/validatorchange pool includes BLS to execution messages; REST
support for new pool
* catch failed individual futures
* increase BLS changes bound and keep BLS seen consistent with subpool
* deque capacities should be powers of 2
When running `nimbus_light_client`, we persist the latest header from
`LightClientStore.finalized_header` in a database across restarts.
Because the data format is derived from the latest `LightClientStore`,
this could lead to data being persisted in pre-release formats.
To enable us to test later `LightClientStore` versions on devnets,
transition to a `ForkedLightClientStore` internally that is only
migrated to newer forks on-demand (instead of starting at latest).
Distinguish between those code locations that need to be updated on each
light client data format change, and those others that should generally
be fine, as long as a valid light client object is processed.
The former are tagged with static assert for `LightClientDataFork.high`.
The latter are changed to `lcDataFork > LightClientDataFork.None` to
indicate that they depend only on presence of any valid object.
Also bundled a few minor cleanups and fixes.
Also add `Forky` type for `LightClientStore` and minor fixes / cleanups.
The light client data structures were changed to accommodate additional
fields in future forks (e.g., to also hold execution data).
There is a minor change to the JSON serialization, where the `header`
properties are now nested inside a `LightClientHeader`.
The SSZ serialization remains compatible.
See https://github.com/ethereum/consensus-specs/pull/3190
and https://github.com/ethereum/beacon-APIs/pull/287
In a future fork, light client data will be extended with execution info
to support more use cases. To anticipate such an upgrade, introduce
`Forky` and `Forked` types, and ready the database schema.
Because the mapping of sync committee periods to fork versions is not
necessarily unique (fork schedule not in sync with period boundaries),
an additional column is added to `period` -> `LightClientUpdate` table.
* correctly report ignored contributions in metrics
* avoid counting subset contributions in vmon (bring in line with
attestation aggregates)
* avoid signature checks for subset attestations
A being a non-strict subset is a sufficient condition to ignore.
Introduce (optional) pruning of historical data - a pruned node will
continue to answer queries for historical data up to
`MIN_EPOCHS_FOR_BLOCK_REQUESTS` epochs, or roughly 5 months, capping
typical database usage at around 60-70gb.
To enable pruning, add `--history=prune` to the command line - on the
first start, old data will be cleared (which may take a while) - after
that, data is pruned continuously.
When pruning an existing database, the database will not shrink -
instead, the freed space is recycled as the node continues to run - to
free up space, perform a trusted node sync with a fresh database.
When switching on archive mode in a pruned node, history is retained
from that point onwards.
History pruning is scheduled to be enabled by default in a future
release.
In this PR, `minimal` mode from #4419 is not implemented meaning
retention periods for states and blocks are always the same - depending
on user demand, a future PR may implement `minimal` as well.
* consolidate consensus spec transition test fixtures
* include capella
* consoliate fork test fixtures
* note change in EIP-4844 process_block in alpha.2
* fix REST liveness endpoint responding even when gossip is not enabled
* fix VC exit code on doppelganger hit
* fix activation epoch not being updated correctly on long deposit
queues
* fix activation epoch being set incorrectly when updating validator
* move most implementation logic to `validator_pool`, add tests
* ensure consistent logging between VC and BN
* add docs
andri lim
Etan Kissling
tersec
Eugene Kabanov
zah
Jacek Sieka
henridf
Zahary Karadjov