When restarting beacon node, orphaned blocks remain in the database but
on startup, only the canonical chain as selected by fork choice loads.
When a new block is discovered that builds on top of an orphaned block,
the orphaned block is re-downloaded using sync/request manager, despite
it already being present on disk. Such queries can be answered locally
to improve discovery speed of alternate forks.
With checkpoint sync, the checkpoint block is typically unavailable at
the start, and only backfilled later. To avoid treating it as having
zero hash, execution disabled in some contexts, wrap the result of
`loadExecutionBlockHash` in `Opt` and handle block hash being unknown.
---------
Co-authored-by: Jacek Sieka <jacek@status.im>
Finish the rename started in #4809 to have a consistent naming.
`ExecutionPayloadHash` suggests hash over payload instead of block.
`BlockHash` is also the canonical name in engine API.
Full caches should not be used to mark blocks as unviable. The unviable
status is quite persistent and a block marked as such won't be processed
again once the cache empties. Problem originally introduced in #4808.
If the initial state replays cover the finalized head, import matching
`LightClientBootstrap` into database.
This also addresses this error when light client requests bootstrap from
the genesis slot on networks that launch with Altair enabled.
```
{"lvl":"DBG","ts":"2023-10-04 11:17:49.665+00:00","msg":"LC bootstrap unavailable: Sync committee branch not cached","topics":"chaindag_lc","slot":0}
```
Avoid marking blocks invalid when corresponding `blobSidecarsByRange`
returns an incomplete / incorrect response while syncing. The block
itself may still be valid in that scenario.
There are two conditions leading to `duplicate contribution` log.
Align the logs with the ones used for attestation aggregates,
so that the two conditions can be separated when reading logs.
With Capella, `bls_to_execution_change` SSE should be emitted on the
event stream whenever a new `SignedBLSToExecutionChange` is received.
Add this missing functionality for compatibility with beacon-API specs.
- https://github.com/ethereum/beacon-APIs/pull/248
* use `PayloadAttributesV3` in `nimbus_light_client` for Deneb
From Deneb onward, `forkchoiceUpdated` requires `PayloadAttributesV3`.
In `nimbus_light_client` we still used `PayloadAttributesV2`.
Also clean up two other locations that were already correctly using
`PayloadAttributesV3`, to reduce code duplication.
* fix letter case
* reorder gossip validation checks
Doing the coverage check only after the corresponding committee index is
known allows optimization by early rejecting invalid data.
* use same helper for individual attestations as well
When new finality is reached without supermajority sync committee
support, trigger another event push on beacon-API and libp2p once
the finality gains supermajority support.
- https://github.com/ethereum/consensus-specs/pull/3549
In `v1.4.0-alpha.0`, the blob index validation on gossip was changed to
use `compute_subnet_for_blob_sidecar` instead of having a separate topic
for each individual blob. We updated the spec reference in #5363 without
updating the code accordingly. Fixing this now, and also adding the new
`MAX_BLOBS_PER_BLOCK` check from `v1.4.0-beta.3` as it shares the theme.
`v1.4.0-beta.4` made the Gossip rules more strict and now requires to
ignore blobs from other branches if there are equivocating blocks.
Those blobs are only requestable via Req/Resp.
Fix regression from #4808 where blobs that are already known are issued
ACCEPT verdict, propagating them to peers over and over again.
`validateBlobSidecar` contains the correct IGNORE logic. Moved it above
the expensive checks to retain the performance of the check.
Directly initialize `ForkedLightClientObj` instead of separately first
setting the `kind` (initializing everything to zero) and then assigning
the forky data after that.
For symmetry with `forkyState` when using `withState`, and to avoid
problems with shadowing of `blck` when using `withBlck` in `template`,
also rename the injected `blck` to `forkyBlck`.
- https://github.com/nim-lang/Nim/issues/22698
Sync committee duties are performed by the sync committee as determined
by slot + 1. We did it correctly for individual messages, but selected
the incorrect participants for aggregate contributions for the very
first slot per period (roughly 1 per ~27 hrs on Mainnet). The faulty
participants selection code was originally introduced in #2925.
In Nim 2.0, attempting to use `Taskpool.spawn` inside `{.async.}` `proc`
leads to `Error: cannot generate destructor for generic type: Isolated`.
Add an intermediate wrapper `proc` that performs the `spawn` operation
to workaround the problem.
Add separate log topic for `block_processor` messages.
Topic named similar to the other `_processor` modules:
- `eth2_processor` --> `gossip_eth2`
- `light_client_processor` --> `gossip_lc`
- `optimistic_processor` --> `gossip_opt`
When a block is introduced to the system both via REST and gossip at the
same time, we will call `storeBlock` from two locations leading to a
dupliace check race condition as we wait for the EL.
This issue may manifest in particular when using an external block
builder that itself publishes the block onto the gossip network.
* refactor enqueue flow
* simplify calling `addBlock`
* complete request manager verifier future for blobless blocks
* re-verify parent conditions before adding block
among other things, it might have gone stale or finalized between one
call and the other
* async batch verification
When batch verification is done, the main thread is blocked reducing
concurrency.
With this PR, the new thread signalling primitive in chronos is used to
offload the full batch verification process to a separate thread
allowing the main threads to continue async operations while the other
threads verify signatures.
Similar to previous behavior, the number of ongoing batch verifications
is capped to prevent runaway resource usage.
In addition to the asynchronous processing, 3 addition changes help
drive throughput:
* A loop is used for batch accumulation: this prevents a stampede of
small batches in eager mode where both the eager and the scheduled batch
runner would pick batches off the queue, prematurely picking "fresh"
batches off the queue
* An additional small wait is introduced for small batches - this helps
create slightly larger batches which make better used of the increased
concurrency
* Up to 2 batches are scheduled to the threadpool during high pressure,
reducing startup latency for the threads
Together, these changes increase attestation verification throughput
under load up to 30%.
* fixup
* Update submodules
* fix blst build issues (and a PIC warning)
* bump
---------
Co-authored-by: Zahary Karadjov <zahary@gmail.com>
* fall back to non-fcu fork choice on epoch boundaries
* Future[bool]
* fix
* Update beacon_chain/consensus_object_pools/consensus_manager.nim
Co-authored-by: Etan Kissling <etan@status.im>
* make things consistent with Opt[void] return
---------
Co-authored-by: Etan Kissling <etan@status.im>
* Perform block pre-check before validating execution
When syncing, blocks have not been gossip-validated and are therefore
prone to trivial faults like being known-unviable, duplicate or missing
their parent.
In addition, the duplicate-block check in BlockProcessor was not
considering the quarantine flow and would therefore cause
recently-quarantined blocks to be silenty dropped when their parent
appears delaying the sync end-game and thus causing longer startup
resync time.
This PR verifies trivial conditions before performing execution
validation thus avoiding duplicates and missing parents alike.
It also ensures that the fast-sync EL mode is used for finalized blocks
even if the EL is timing out / slow to respond - this allows the CL to
complete its sync faster and switch to "normal" lock-step at the head of
the chain more quickly, thus also allowing the EL to access the latest
consensensus information earlier.
* oops
* remove unused constant
* Clarify addOrphan error/logging
addOrphan returned a bool to indicate success. Change this to a Result
so that different errors can be distinguished.
* Update beacon_chain/consensus_object_pools/block_quarantine.nim
Co-authored-by: tersec <tersec@users.noreply.github.com>
* Update beacon_chain/gossip_processing/gossip_validation.nim
---------
Co-authored-by: tersec <tersec@users.noreply.github.com>
* replace optimisticRoots table with field in BlockRef
* copyright year
* mark finalized blocks as verified on load
* Update beacon_chain/consensus_object_pools/block_dag.nim
Co-authored-by: Etan Kissling <etan@status.im>
* expand non-optimistic block checking to all pre-merge blocks; refactor markBlockVerified to use BlockRef rather than block root and remove superfluous caller in newPayload path replaced by addResolvedHeadBlock BlockRef construction
* don't treat finalized block specially; VALID status is sticky
---------
Co-authored-by: Etan Kissling <etan@status.im>
When doing sync for blocks older than
MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS, we skip the blobs by range
request, but we then pass en empty blob sequence to
validation, which then fails.
To fix this: Use an Option[Blobsidecars] to allow expressing the
distinction between "empty blob sequence" and "blobs unavailable". Use
the latter for "old" blocks, and don't attempt to run blob validation.
`SyncCommitteeMsgPool` grouped messages by their `beacon_block_root`.
This is problematic around sync committee period boundaries and forks.
Around sync committee period boundaries, members from both the current
and next sync committee may sign the same `beacon_block_root`; mixing
the signatures from both committees together is a mistake. Likewise,
around fork transitions, the `signing_root` changes, so those messages
also need to be segregated.
The `SignedContributionAndProof: invalid contribution signature` check
is sometimes hit around fork boundaries when running local testnet.
To avoid failing CI, revert this isntance to a plain `errReject` until
the underlying problem is addressed.
Updates gossip validation spec references to v1.3.0 and fixes an
incorrect reference to "signed_aggregate_and_proof" in sync contribution
documentation.