* ShufflingRef approach to next-epoch validator duty calculation/prediction
* refactor action_tracker.updateActions to take ShufflingRef + beacon_proposers; refactor maybeUpdateActionTrackerNextEpoch to be separate and reused function; add actual fallback logic
* document one possible set of conditions
* check epoch participation flags and inactivity scores to ensure no penalties and MAX_EFFECTIVE_BALANCE to ensure rewards don't matter
* correctly (un)shuffle each proposer index
* remove debugging assertion
Cleanup of `ProveField` warnings in `slashing_protection_common` module.
Note that `ProveField` is disabled by default in makefile, but sometimes
these pop up when doing a regular `nim c`, and cleaning these may allow
enabling the warning in some future.
As the `case` is over `a.kind`, `ProveField` warnings for `b` have to be
suppressed using `{.push.}` / `{.pop.}` for comparison operators.
For symmetry with `forkyState` when using `withState`, and to avoid
problems with shadowing of `blck` when using `withBlck` in `template`,
also rename the injected `blck` to `forkyBlck`.
- https://github.com/nim-lang/Nim/issues/22698
This PR renames the existing `validator_duties` to `beacon_validators`
and in doing so, names validators running inside the beacon node process
"beacon validators" while those running the VC can be referred to as
"client validators" to disambiguate the two.
The existing `validator_duties` instead takes on a new responsibility:
as a home for logic shared between beacon and client validators - ie
code that provides consistency in implementation and behavior between
the two modes of operation.
Not only does this simplify reasoning about where to put code -it also
reduces the number of dependencies the validator client has from ~5000
to ~3000 modules (!) according to `nim genDepend` significantly reducing
compile times.
- Remove unnecessary `Defect` references
- Remove spurious `SerializationError` references
- Remove duplicate `writeValue` template in `keystore.nim`;
same implementation already exists a bit further above in same file.
When a block is introduced to the system both via REST and gossip at the
same time, we will call `storeBlock` from two locations leading to a
dupliace check race condition as we wait for the EL.
This issue may manifest in particular when using an external block
builder that itself publishes the block onto the gossip network.
* refactor enqueue flow
* simplify calling `addBlock`
* complete request manager verifier future for blobless blocks
* re-verify parent conditions before adding block
among other things, it might have gone stale or finalized between one
call and the other
We have several modules that import `nim-eth` for the sole purpose of
its `keys.newRng` function. This function is meanwhile a simple wrapper
around `nim-bearssl`'s `HmacDrbgContext.new()`, so the import doesn't
really serve a use anymore. Replace `keys.newRng` with the direct call
to reduce `nim-eth` imports.
* Refactor api.nim to provide more informative failure reasons.
Distinct between unexpected data and unexpected code.
Deprecate Option[T] usage.
* Fix 400 for produceBlindedBlock().
Get proper string conversion for strategy.
* Fix SSZ encoded versions of ProduceBlockResponseV2, ProduceBlockResponseV2 can be received and decoded.
Fix done() warnings.
Bump presto.
* Fix compilation error with new presto.
Use TcpNoDelay option for Web3Signer.
* Fix produceBlockV2() should provide SSZ responses too.
* Address block encoding issue.
* Fix signing test.
* Bump presto.
* Address review comments.
* Initial commit with both methods enabled: `poll` and `event`.
* Address review comments.
* Address review comments.
Fix copyright years.
* After bump fixes.
* allow payload builder client to be function of validator/proposer
* fileExists has side effects on Windows and only Windows
* another not-always-func
* replace optimisticRoots table with field in BlockRef
* copyright year
* mark finalized blocks as verified on load
* Update beacon_chain/consensus_object_pools/block_dag.nim
Co-authored-by: Etan Kissling <etan@status.im>
* expand non-optimistic block checking to all pre-merge blocks; refactor markBlockVerified to use BlockRef rather than block root and remove superfluous caller in newPayload path replaced by addResolvedHeadBlock BlockRef construction
* don't treat finalized block specially; VALID status is sticky
---------
Co-authored-by: Etan Kissling <etan@status.im>
When doing sync for blocks older than
MIN_EPOCHS_FOR_BLOB_SIDECARS_REQUESTS, we skip the blobs by range
request, but we then pass en empty blob sequence to
validation, which then fails.
To fix this: Use an Option[Blobsidecars] to allow expressing the
distinction between "empty blob sequence" and "blobs unavailable". Use
the latter for "old" blocks, and don't attempt to run blob validation.
`SyncCommitteeMsgPool` grouped messages by their `beacon_block_root`.
This is problematic around sync committee period boundaries and forks.
Around sync committee period boundaries, members from both the current
and next sync committee may sign the same `beacon_block_root`; mixing
the signatures from both committees together is a mistake. Likewise,
around fork transitions, the `signing_root` changes, so those messages
also need to be segregated.
* low attestations during epoch should instafail in CI; dbg -> warn level on newPayload log
* improve newPayload warning message when no valid EL connected
* reduce potential spam; make log spelling more consistent; use fatal/quit
* Refactor nimbus_signing_node to support Unix signals.
* Fix SN unable to close REST server properly.
* Fix `keys`, `deposit` and `validator_registration` endpoints issues.
Add getValidatorExitSignature() and getDepositMessageSignature() to validator_pool.
* Add /reload endpoint and implementation.
Fix signData to not cancel `timer`.
Fix validator_pool should clear attachedValidators table.
* Diva protocol enhancement implementation.
* outline for comparing bids from builder and engine API in BN
* set up async
* decision scaffold
* clean up logging
* Refactor proposeBlockMEV
* Update beacon_chain/validators/validator_duties.nim
Co-authored-by: zah <zahary@status.im>
* Update beacon_chain/validators/validator_duties.nim
Co-authored-by: zah <zahary@status.im>
* use typedescs instead of explicit generic parameters
---------
Co-authored-by: zah <zahary@status.im>
Just the variable, not yet `lcDataForkAtStateFork` / `atStateFork`.
- Shorten comment in `light_client.nim` to keep line width
- Do not rename `stateFork` mention in `runProposalForkchoiceUpdated`.
- Do not rename `stateFork` in `getStateField(dag.headState, fork)`
Rest is just a mechanical mass replace
* Support for driving multiple EL nodes from a single Nimbus BN
Full list of changes:
* Eth1Monitor has been renamed to ELManager to match its current
responsibilities better.
* The ELManager is no longer optional in the code (it won't have
a nil value under any circumstances).
* The support for subscribing for headers was removed as it only
worked with WebSockets and contributed significant complexity
while bringing only a very minor advantage.
* The `--web3-url` parameter has been deprecated in favor of a
new `--el` parameter. The new parameter has a reasonable default
value and supports specifying a different JWT for each connection.
Each connection can also be configured with a different set of
responsibilities (e.g. download deposits, validate blocks and/or
produce blocks). On the command-line, these properties can be
configured through URL properties stored in the #anchor part of
the URL. In TOML files, they come with a very natural syntax
(althrough the URL scheme is also supported).
* The previously scattered EL-related state and logic is now moved
to `eth1_monitor.nim` (this module will be renamed to `el_manager.nim`
in a follow-up commit). State is assigned properly either to the
`ELManager` or the to individual `ELConnection` objects where
appropriate.
The ELManager executes all Engine API requests against all attached
EL nodes, in parallel. It compares their results and if there is a
disagreement regarding the validity of a certain payload, this is
detected and the beacon node is protected from publishing a block
with a potential execution layer consensus bug in it.
The BN provides metrics per EL node for the number of successful or
failed requests for each type Engine API requests. If an EL node
goes offline and connectivity is resoted later, we report the
problem and the remedy in edge-triggered fashion.
* More progress towards implementing Deneb block production in the VC
and comparing the value of blocks produced by the EL and the builder
API.
* Adds a Makefile target for the zhejiang testnet
* log validator that triggers doppelganger
* move activity detection closer to where it's performed, record
aggregation as activity (since it's part of the liveness endpoint)
* vc: check for doppelgangers in epoch 0 also (so that activity in epoch
1 can happen)
* avoid some looping when processing activities
This commit removes ForkySignedBeaconBlockMaybeBlobs and all
references. I tried to pull that thread only as little as was needed
to get rid of it. Left a placeholder BlobSidecar array (in lieu of
Opt[BlobsSidecar]) in a few places; this will be used as we rebuild
the decoupled implementation.
* Local sim impovements
* Added support for running Capella and EIP-4844 simulations
by downloading the correct version of Geth.
* Added support for using Nimbus remote signer and Web3Signer.
Use 2 out of 3 threshold signing configuration in the mainnet
configuration and regular remote signing in the minimal one.
* The local testnet simulation can now use a payload builder.
This is currently not activated in CI due to lack of automated
procedures for installing third-party relays or builders.
You are adviced to use mergemock for now, but for most realistic
results, we can create a simple builder based on the nimbus-eth1
codebase that will be able to propose transactions from the regular
network mempool.
* Start the simulation from a merged state. This would allow us
to start removing pre-merge functionality such as the gossip
subsciption logic. The commit also removes the merge-forcing
hack installed after the TTD removal.
* Consolidate all the tools used in the local simulation into a
single `ncli_testnet` binary.
* restore doppelganger check on connectivity loss
https://github.com/status-im/nimbus-eth2/pull/4398 introduced a
regression in functionality where doppelganger detection would not be
rerun during connectivity loss. This PR reintroduces this check and
makes some adjustments to the implementation to simplify the code flow
for both BN and VC.
* track when check was last performed for each validator (to deal with
late-added validators)
* track when we performed a doppel-detectable activity (attesting) so as
to avoid false positives
* remove nodeStart special case (this should be treated the same as
adding a validator dynamically just after startup)
* allow sync committee duties in doppelganger period
* don't trigger doppelganger when registering duties
* fix crash when expected index response is missing
* fix missing slashingSafe propagation
Other changes:
Renamed the `EIP_4844_FORK_*` config constants to `DENEB_FORK_*` as
this matches the latest spec and it's already used in the official
Sepolia config.
We do a linear scan of all pubkeys for each validator and slot - this
becomes expensive with large validator counts.
* normalise BN/VC validator startup logging
* fix crash when host cannot be resolved while adding remote validator
* silence repeated log spam for unknown validators
* print pubkey/index/activation mapping on startup/validator
identification
* debug log upon sidecar validation failure
* Fill in signature catch upon SignedBeaconBlockAndBlobsSidecar deser
* Always fill blobssidecar slot and root
* Skip lastFCU when eth1monitor is nil
* fix
* Use cached root
* eip4844 beacon block proposals
* Don't fetch blobs under minimal preset
@tersec's summary of the issue:
BlobsBundleV1 in the execution API spec assumes a mainnet preset blob
size, where the EIP4844 consensus spec defines
FIELD_ELEMENTS_PER_BLOB: 4 under the minimal preset, which leads to a
Blob having a length of 4 * 32, not 4096 * 32 which BlobsBundleV1
requires.
* Revert unintentional script change
* exit/validatorchange pool includes BLS to execution messages; REST
support for new pool
* catch failed individual futures
* increase BLS changes bound and keep BLS seen consistent with subpool
* deque capacities should be powers of 2
* Refactor block/blobs types
Use type system to enforce invariant that a pre-4844 block cannot have
a sidecar.
* Update beacon_chain/nimbus_beacon_node.nim
Co-authored-by: tersec <tersec@users.noreply.github.com>
* review feedback
Co-authored-by: tersec <tersec@users.noreply.github.com>
By enabling the validator monitor, more precise information about the
lifecycle of an attestation is logged at the higher `NOTICE` log level
while current `sent` messages are logged at `INF` instead, since they
are less interesting.
In particular, missed attestations and those that vote for the wrong
head are now detected and logged at NOTICE.
In addition to logging, this feature enables rich metrics around
attestation and sync committee performance - by default, validators are
tracked in aggregate but a detailed mode exists as well
This feature has been available since early Nimbus days, but it has now
been tuned and optimised such that it is safe to enable by default, even
for large setups.
* enable automatic validator monitoring by default
* replace `--validator-monitor-totals` flag with
`--validator-monitor-details` - the detailed mode is disabled by default
* lower "sent" log level to `INF` for several messages - in particular
those that are traced by the validator monitor
This is a retake on #3531 which was later reverted in #3578.
Distinguish between those code locations that need to be updated on each
light client data format change, and those others that should generally
be fine, as long as a valid light client object is processed.
The former are tagged with static assert for `LightClientDataFork.high`.
The latter are changed to `lcDataFork > LightClientDataFork.None` to
indicate that they depend only on presence of any valid object.
Also bundled a few minor cleanups and fixes.
Also add `Forky` type for `LightClientStore` and minor fixes / cleanups.
The light client data structures were changed to accommodate additional
fields in future forks (e.g., to also hold execution data).
There is a minor change to the JSON serialization, where the `header`
properties are now nested inside a `LightClientHeader`.
The SSZ serialization remains compatible.
See https://github.com/ethereum/consensus-specs/pull/3190
and https://github.com/ethereum/beacon-APIs/pull/287
In a future fork, light client data will be extended with execution info
to support more use cases. To anticipate such an upgrade, introduce
`Forky` and `Forked` types, and ready the database schema.
Because the mapping of sync committee periods to fork versions is not
necessarily unique (fork schedule not in sync with period boundaries),
an additional column is added to `period` -> `LightClientUpdate` table.
* fix REST liveness endpoint responding even when gossip is not enabled
* fix VC exit code on doppelganger hit
* fix activation epoch not being updated correctly on long deposit
queues
* fix activation epoch being set incorrectly when updating validator
* move most implementation logic to `validator_pool`, add tests
* ensure consistent logging between VC and BN
* add docs
* Types and scaffolding for EIP-4844
This commit adds the EIP-4844 spec types, and fills in
scaffolding/boilerplate for the use of these types across the repo.
None of the actual EIP-4844 logic is introduced yet.
This follows the pattern used by @tersec when introducing Capella (#4276).
* use eth2-networks fork
* review feedback: add static check EIP4844_FORK_EPOCH == FAR_FUTURE_EPOCH
* review feedback: remove EIP4844 from /eth/v1/config/spec response
* Cleanup / review feedback
* Fix REST test
* Initial commit.
* NextAttestationEntry type.
* Add doppelgangerCheck and actual check.
* Recover deleted check.
* Remove NextAttestainEntry changes.
* More cleanups for NextAttestationEntry.
* Address review comments.
* Remove GENESIS_EPOCH specific check branch.
* Decrease number of full epochs for doppelganger check in VC.
Co-authored-by: zah <zahary@status.im>
When the EL/Builder fails to produce an execution payload, we fall back
to an empty `ExecutionPayload`. Even though it contains no transactions
it should refer to the configured fee recipient. This is useful for
privacy reasons (do not reveal the reason for the empty payload) and for
compliance with additional fee recipient rules by staking pools.
* move duty tracking code to `ActionTracker`
* fix earlier duties overwriting later ones
* re-run subnet selection when new duty appears
* log upcoming duties as soon as they're known (vs 4 epochs before)
tersec
Eugene Kabanov
Etan Kissling
Jacek Sieka
zah
henridf
Zahary Karadjov