nimbus-eth2/CHANGELOG.md

1540 lines
66 KiB
Markdown
Raw Normal View History

2022-09-08 13:04:27 +00:00
2022-09-07 v22.9.0
==================
Nimbus `v22.9.0` is a `high-urgency` upgrade that fixes a critical pre-TTD block production issue affecting users that restarted their node after Bellatrix. It also improves compatibility with Besu, Prysm and slow block builders and provides a speed boost in block processing important for those running on Raspberry Pi and similar hardware.
With the merge drawing near, the focus of this release has been to include low risk changes that improve stability and compatibility - if you are unsure whether to upgrade, do reach out to us in discord to discuss your particular deployment.
A shout out to our great community for reporting and helping diagnose the issues that led up to this release - in particular Michael Sproul (Lighthouse) and Joe Clapis (Rocket Pool).
### Improvements
* Allow more time for block builder to deliver block
[#4088](https://github.com/status-im/nimbus-eth2/pull/4088)
* Improve Bellatrix block processing performance
[#4085](https://github.com/status-im/nimbus-eth2/pull/4085) and [#4082](https://github.com/status-im/nimbus-eth2/pull/4082)
* Optimize execution layer calls when not producing blocks, improving Besu performance and compatiblity
[#4055](https://github.com/status-im/nimbus-eth2/pull/4055)
* Revise timing of execution layer configuration call, resolving warnings that no consensus client is present on Geth and Besu
[#4077](https://github.com/status-im/nimbus-eth2/pull/4077)
* Log `Exchanged engine configuration` when first connected to correctly configured execution engine
[#4096](https://github.com/status-im/nimbus-eth2/pull/4096)
* Switch to `nim-websock` for websocket connections, resolving delays when payloads exceed 1mb
[#4061](https://github.com/status-im/nimbus-eth2/pull/4061)
### Fixes
* Fix pre-TTD block proposals on nodes that (re-)started after Bellatrix
[#4094](https://github.com/status-im/nimbus-eth2/issues/4094)
* Fix gossip message id, improving connectivity health with Prysm
[#4076](https://github.com/status-im/nimbus-eth2/pull/4076)
* Improve handling of blocks deemed invalid by the execution layer
[#4081](https://github.com/status-im/nimbus-eth2/pull/4081)
* Fix a rare crash that could happen when execution layer disconnected
[#4095](https://github.com/status-im/nimbus-eth2/pull/4095)
2022-09-01 14:42:20 +00:00
2022-08-31 v22.8.2
2022-09-01 10:44:49 +00:00
==================
2022-09-01 14:42:20 +00:00
Nimbus `v22.8.2` is a `low-urgency` hotfix release, eliminating a risk for potential crash during block production that was introduced in the `v22.8.1` release. You can safely skip this release if you haven't enabled DEBUG logging on your beacon node, as the risk exists only when DEBUG logging is enabled.
2022-09-01 10:44:49 +00:00
### Improvements:
* Reduced CPU usage for validator registration when using an external builder:
https://github.com/status-im/nimbus-eth2/pull/4040
### Fixes:
* A potential crash during block production when DEBUG logging is enabled:
https://github.com/status-im/nimbus-eth2/pull/4054
2022-08-30 09:49:00 +00:00
2022-08-30 v22.8.1
==================
Nimbus `v22.8.1` is a `high-urgency` upgrade, improving the stability and performance of Nimbus in post-merge networks. Upgrading is highly recommended due to improved timing of the interactions with the execution engine which may lead to higher profitability from block production, especially for users running Nethermind.
### Improvements
* More timely block proposals in the presence of a non-responsive builder node:
https://github.com/status-im/nimbus-eth2/pull/4012
* More timely delivery of fork-choice update information to the execution client, enabling the production of more profitable blocks:
https://github.com/status-im/nimbus-eth2/pull/4012
* Improved SHA256 hashing performance resulting in a minor overall CPU usage reduction:
https://github.com/status-im/nimbus-eth2/pull/4017
* Reduced latency in the light client when following the head of the chain optimistically:
https://github.com/status-im/nimbus-eth2/pull/4002
* Spec-compliant delivery of the "safe block hash" property of the "fork-choice update" messages sent to the Engine API:
https://github.com/status-im/nimbus-eth2/pull/4010
* Relax overly aggressive gossip filtering conditions for incoming blocks:
https://github.com/status-im/nimbus-eth2/pull/4044
* New metrics `beacon_block_production_errors` and`beacon_block_payload_errors` for detecting non-healthy operation of the Engine API:
https://github.com/status-im/nimbus-eth2/pull/4036
### Fixes
* Sporadic loss of connectivity to the execution engine in the presence of large payloads:
https://github.com/status-im/nimbus-eth2/pull/4028
* Inappropriate loss of connectivity to honest peers in the presence of a non-responding execution client:
https://github.com/status-im/nimbus-eth2/pull/4020
* A loophole allowing the inclusion of very old and invalid slashing and exit messages within blocks:
https://github.com/status-im/nimbus-eth2/pull/4013
* Confusing error message when trusted node sync is executed with an invalid REST URL:
https://github.com/status-im/nimbus-eth2/pull/4024
2022-08-22 22:11:29 +00:00
2022-08-23 v22.8.0
==================
Nimbus `v22.8.0` is a `medium` urgency release, featuring full support for the upcoming mainnet merge! All users should upgrade at their earliest convenient, but no later than 5th of September.
> Since the network will go through the Bellatrix hard-fork on Sept 6, 2022, 11:34:47am UTC, failure to upgrade in time will result in inactivity penalties.
Please note that once the network reaches the terminal total difficulty (currently estimated to happen between 13th and 15th of September), it will no longer be possible to operate a beacon node without pairing it with a single non-shared merge-ready execution client. Nimbus is fully compatible will all execution clients and the required configuration steps for all of them are the same. Please refer to our merge guide for more details:
https://nimbus.guide/merge.html
To raise awareness of the required configuration changes, once the Bellatrix fork is activated on 6th of September, Nimbus will refuse to start unless a properly configured and authenticated Engine API end-point is provided through the command-line options `--web3-url` and `--jwt-secret`. If you need more time to complete the transition, you can temporarily run the beacon node with the command-line option `--require-engine-api-in-bellatrix=no`, but please note that such a setup will stop working once the network TTD is reached!
We would like to say a huge THANK YOU to all of our users who provided immensely valuable feedback in the many months of hard work leading to the merge and to all the fellow research and implementation teams who made this historic release possible!
Onwards and happy merging!
### Breaking changes
* Nimbus will refuse to start unless connected to a properly configured execution client in Bellatrix-enabled networks:
https://github.com/status-im/nimbus-eth2/pull/4006
* The custom error code returned by Nimbus when a validator doppelganger is detected has been changed from 1031 to 129 to improve compatibility with `systemd`:
https://github.com/status-im/nimbus-eth2/pull/3977
### Improvements
* Support for external block builders (a.k.a. MEV):
https://github.com/status-im/nimbus-eth2/pull/3883
* Beta release for the Nimbus stand-alone light client, which can be used to drive any execution client without requiring a full-blown beacon node:
https://nimbus.guide/light-client-data.html
* The first spec-compliant implementation of the LibP2P protocols for serving light client data:
https://nimbus.guide/light-client-data.html
* Keystore locking prevents accidentally loading the same validator keys in multiple instances of the Nimbus beacon node and the Nimbus validator client, thus eliminating a potential slashing risk:
https://github.com/status-im/nimbus-eth2/pull/3907
* Debian and RPM packages for the Nimbus beacon node and the Nimbus validator client are now available as part of the release. In the near future, Status will also provide a package repository, offering a more convenient installation:
https://github.com/status-im/nimbus-eth2/pull/3974
https://github.com/status-im/infra-nimbus/issues/79
* Improved performance on networks with heavy forking activity through a reduction of the required state replays:
https://github.com/status-im/nimbus-eth2/pull/3990
* The Nimbus validator client now supports validator activity metrics such as `beacon_attestations_sent`, `beacon_aggregates_sent`, `beacon_attestation_sent_delay`, `beacon_blocks_sent`, `beacon_blocks_sent_delay`, `beacon_sync_committee_messages_sent`, `beacon_sync_committee_message_sent_delay`, `beacon_sync_committee_contributions_sent`:
https://github.com/status-im/nimbus-eth2/pull/3915
* The sync status displayed in the Nimbus status bar and certain log messages now describes the state of the client more accurately (optimistically synced vs fully synced):
https://github.com/status-im/nimbus-eth2/pull/3987
### Fixes
* Spec violation in the expected payload of the `/eth/v1/validator/prepare_beacon_proposer` Beacon API end-point:
https://github.com/status-im/nimbus-eth2/pull/3938
* Invalid empty execution payloads being produced when the execution client is not responding:
https://github.com/status-im/nimbus-eth2/pull/3991
* Potentially incorrect Eth1 block votes, disagreeing with the forming majority:
https://github.com/status-im/nimbus-eth2/pull/3944
* More resilient deposit synchronization when Nimbus is paired with a highly loaded execution client:
https://github.com/status-im/nimbus-eth2/pull/3943
https://github.com/status-im/nimbus-eth2/pull/3957
* A potential delay in detecting the terminal total difficulty block:
https://github.com/status-im/nimbus-eth2/pull/3956
* Missing Gossip filtering rule for sync committee contributions resulting in unnecessary traffic:
https://github.com/status-im/nimbus-eth2/pull/3941
* Compatibility issue preventing trusted node sync from Lodestar nodes:
https://github.com/status-im/nimbus-eth2/pull/3934
* A potential crash while processing rare gossip messages such as slashings and exits:
https://github.com/status-im/nimbus-eth2/issues/3965
* Inappropriate attestations sent by the validator client when the connected beacon node is only optimistically synced:
https://github.com/status-im/nimbus-eth2/pull/3968
2022-07-26 20:53:16 +00:00
2022-07-26 v22.7.0
==================
Nimbus `v22.7.0` is a `low` urgency release packing everything necessary for the [upcoming Prater/Goerli merge](https://wenmerge.com/) and introducing the [Nimbus validator client](https://nimbus.guide/validator-client.html) (currently in BETA).
### Other Improvements
* Support for fee recipient management through the [Keymanager API](https://ethereum.github.io/keymanager-APIs/#/Fee%20Recipient) and
through the [`/eth/v1/validator/prepare_beacon_proposer`](https://ethereum.github.io/beacon-APIs/#/Validator/prepareBeaconProposer) Beacon API end-point:
https://github.com/status-im/nimbus-eth2/pull/3864
https://github.com/status-im/nimbus-eth2/pull/3901
* Support for the post-merge optimistic sync specification:
https://github.com/status-im/nimbus-eth2/pull/3793
* More comprehensive spec-compliance in our fork-choice implementation:
https://github.com/status-im/nimbus-eth2/pull/3849
* More spec-compliant handling of `QUANTITY` values within the Engine API responses:
https://github.com/status-im/nim-web3/pull/55
https://github.com/status-im/nimbus-eth2/issues/3844
* The `Slot end` log message now includes information regarding current and
upcoming sync committee duties to help you identify the most appropriate
time to restart the client during an upgrade:
https://github.com/status-im/nimbus-eth2/pull/3854
* Specifying a `WEB3_URL` environment variable is no longer mandatory
when launching beacon nodes with the `run-*-beacon-node.sh` scripts:
https://github.com/status-im/nimbus-eth2/pull/3810
* The `--finalized-checkpoint-state` and the `--finalized-checkpoint-block`
command-line parameters can no longer be used with certain invalid inputs:
https://github.com/status-im/nimbus-eth2/pull/3858
* Specifying `--network=goerli` is now equivalent to specifying `--network=prater`:
https://github.com/status-im/nimbus-eth2/pull/3874
### Fixes
* A risk for invalid block proposals during high forking activity in the
network due to inappropriate inclusion of attestations from other forks:
https://github.com/status-im/nimbus-eth2/pull/3893
* Interrupted tracking of deposits, triggered by a non-responsive web3 end-point:
https://github.com/status-im/nimbus-eth2/pull/3905
* Inappropriate error returned by the REST API when broadcasting of Gossip
messages is not immediately possible:
https://github.com/status-im/nimbus-eth2/pull/3843
* Rare conditions under which P2P connections were closed inappropriately:
https://github.com/status-im/nimbus-eth2/pull/3795
* Potential inaccuracies in the `next_action_wait` metric:
https://github.com/status-im/nimbus-eth2/pull/3862
2022-06-28 22:08:56 +00:00
2022-06-29 v22.6.1
==================
Nimbus `v22.6.1` is a `low-urgency` release which comes pre-configured with the correct TTD value for the Sepolia network and improves the behavior of Nimbus in merge testnets.
### Improvement
2022-07-26 20:53:16 +00:00
* Allow testing the Engine API JWT credentials even before the merge:
2022-06-28 22:08:56 +00:00
https://github.com/status-im/nimbus-eth2/pull/3786
### Fixes
2022-07-26 20:53:16 +00:00
* Lack of detection of the connected execution client's network when attached to the Engine API port:
2022-06-28 22:08:56 +00:00
https://github.com/status-im/nimbus-eth2/pull/3804
2022-07-26 20:53:16 +00:00
* Logic error leading to a premature start of the `exchange transition configuration` Engine API requests:
2022-06-28 22:08:56 +00:00
https://github.com/status-im/nimbus-eth2/pull/3809
2022-07-26 20:53:16 +00:00
* Inappropriate inclusion of the `execution_optimistic` field in REST responses before the merge:
2022-06-28 22:08:56 +00:00
https://github.com/status-im/nimbus-eth2/pull/3807
2022-06-20 14:24:47 +00:00
2022-06-20 v22.6.0
==================
2022-06-20 21:06:29 +00:00
Nimbus `v22.6.0` brings support for the merge testnets Ropsten and Sepolia (please stay tuned for TTD announcements for the latter) and a lot of polish where we've taken the time to address a long list of UX improvements and bug fixes suggested or reported by our users. We are deeply grateful to everybody who contributed valuable feedback for this release.
2022-06-20 14:24:47 +00:00
### Improvements
* TTD detection and Panda art for the merge!
https://github.com/status-im/nimbus-eth2/pull/3670
https://github.com/status-im/nimbus-eth2/pull/3745
2022-07-26 20:53:16 +00:00
* The execution layer priority fees recipient address can be configured individually for each validator:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3652
2022-07-26 20:53:16 +00:00
* Through better defaults, the parameters `--rest-url`, `--trusted-node-url` can be omitted if the targeted node is running on the same machine:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3689
2022-07-26 20:53:16 +00:00
* Improved spec-compliance with the Beacon API and the Engine API as defined after the merge:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3679
https://github.com/status-im/nimbus-eth2/pull/3780
* The custom error code `129` will signal a detected doppelganger on the network. This can be handled in the Nimbus's service supervisor to prevent an automatic restart:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3728
2022-07-26 20:53:16 +00:00
* The Nimbus status bar can be configured to display the current version number:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3747
2022-07-26 20:53:16 +00:00
* Specifying the `--terminal-total-difficulty-override` parameter is no longer necessary for the Ropsten network:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3754
2022-07-26 20:53:16 +00:00
* Built-in support for the Sepolia network which will launch on June 20th and reach TTD shortly after:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3762
2022-07-26 20:53:16 +00:00
* More robust syncing with the connected execution layer node in Bellatrix-enabled networks:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3759
2022-07-26 20:53:16 +00:00
* The `web3 test` command is now compatible with nodes that have been configured to serve only the Engine API:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3761
### Fixes
2022-07-26 20:53:16 +00:00
* A rare crash triggered when using a HTTP web3 URL:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3669
2022-07-26 20:53:16 +00:00
* ERA checkpoint sync failing with "Backfill block must have a summary":
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3675
2022-07-26 20:53:16 +00:00
* Incorrect sync progress indicator shortly after a trusted node sync:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3736
2022-07-26 20:53:16 +00:00
* Incorrect values returned by the `/eth/v1/node/syncing` API under rare circumstances:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3720
2022-07-26 20:53:16 +00:00
* Misleading log message when an attestation was not delivered to any peer:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3737
2022-07-26 20:53:16 +00:00
* Incorrect handling of case-sensitive web3 URLs:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3757
2022-07-26 20:53:16 +00:00
* Incorrect encoding of the `current_epoch_participation` and `previous_epoch_participation` fields in the REST requests returning `BeaconState` results:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3776
2022-07-26 20:53:16 +00:00
* Incorrect URL for the Keymanager delete keystores request:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3727
2022-07-26 20:53:16 +00:00
* Non-standard encoding required by the Keymanager API for the import keystores request:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3768
2022-07-26 20:53:16 +00:00
* A significant source of omitted events in the REST events API:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3664
2022-07-26 20:53:16 +00:00
* Incorrect parsing of the `weak-subjectivity-checkpoint` parameter:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3765
2022-07-26 20:53:16 +00:00
* Lack of support for trailing commas in lists and inline tables in the TOML config files:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nim-toml-serialization/pull/47
2022-07-26 20:53:16 +00:00
### Removed functionality
2022-06-20 14:24:47 +00:00
2022-07-26 20:53:16 +00:00
* The Nimbus-specific JSON-RPC service which was deprecated in version v22.3.0 is now removed. If you are currently relying on the JSON-RPC API, please consider switching to the official [REST API](https://nimbus.guide/rest-api.html). Using any of the `--rpc` flags will now result in a warning:
2022-06-20 14:24:47 +00:00
https://github.com/status-im/nimbus-eth2/pull/3656
2022-05-30 15:36:40 +00:00
2022-05-30 v22.5.2
==================
Nimbus `v22.5.2` is a `low-urgency` maintenance release updating Ropsten testnet support.
### Fixes:
2022-07-26 20:53:16 +00:00
* Modify proposer boost from 70% to 40% to improve network consensus:
2022-05-30 15:36:40 +00:00
https://github.com/status-im/nimbus-eth2/commit/14dc3855f6cd06579294322a6ed206f678c8530f
2022-07-26 20:53:16 +00:00
* Update Ropsten TTD to a large enough number it can't be readily triggered by mining:
2022-05-30 15:36:40 +00:00
https://github.com/status-im/nimbus-eth2/pull/3668
2022-05-20 22:25:08 +00:00
2022-05-20 v22.5.1
==================
Nimbus `v22.5.1` is a `low-urgency` maintenance release addressing a Web3 compatibility regression and introducing Ropsten testnet support.
### Improvements:
2022-07-26 20:53:16 +00:00
* Support for the Ropsten testnet, intended for merge testing:
2022-05-20 22:25:08 +00:00
https://github.com/status-im/nimbus-eth2/pull/3648
### Fixes:
2022-07-26 20:53:16 +00:00
* Restore compatibility with certain Web3 endpoints:
2022-05-20 22:25:08 +00:00
https://github.com/status-im/nimbus-eth2/pull/3645
2022-07-26 20:53:16 +00:00
* More spec-compliant handling of JSON fields in REST, for better compatibility with added and optional fields:
2022-05-20 22:25:08 +00:00
https://github.com/status-im/nimbus-eth2/pull/3647
2022-05-17 20:09:30 +00:00
2022-05-17 v22.5.0
==================
Nimbus `v22.5.0` is a `low-urgency` maintenance release. It implements the proposer boosting fork-choice policy and is compliant with the latest [Bellatrix specifications](https://github.com/ethereum/consensus-specs#bellatrix-also-known-as-the-merge). It also provides an early preview of our built-in support for [BLS threshold signatures](https://notes.ethereum.org/@djrtwo/blst-rfp) (via regular Web3Signer instances): this marks the first step of our long-term [secret-shared validators roadmap](https://github.com/status-im/nimbus-eth2/issues/3416) which enables node operators / staking pools to deploy Nimbus in secure high availability setups (guaranteeing ~100% uptime).
### Improvements:
2022-07-26 20:53:16 +00:00
* A safer fork-choice algorithm which implements the proposer boosting policy:
2022-05-17 20:09:30 +00:00
https://github.com/ethereum/consensus-specs/pull/2353
https://github.com/status-im/nimbus-eth2/pull/3565
2022-07-26 20:53:16 +00:00
* A completely revamped snappy implementation which brings significant speed-ups:
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3564
2022-07-26 20:53:16 +00:00
* Support for the latest Bellatrix specifications (a.k.a. The Merge) + all Kiln testnets:
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3590
2022-07-26 20:53:16 +00:00
* An initial preview release fеaturing built-in support for distributed keystores, (part of our [secret shared validators roadmap]( https://github.com/status-im/nimbus-eth2/issues/3416)):
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3616
2022-07-26 20:53:16 +00:00
* Reduced CPU usage when serving blocks to other syncing clients:
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3598
2022-07-26 20:53:16 +00:00
* A more spec-compliant implementation of the `/eth/v1/config/spec` REST end-point (implementing the v1.1.10 version of the spec):
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3614
2022-07-26 20:53:16 +00:00
* Improved compatibility with all versions of Web3Signer:
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3640
### We've fixed:
2022-07-26 20:53:16 +00:00
* The potential for missed block proposals in the case where an invalid deposit is submitted to the deposit contract:
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3607
https://github.com/status-im/nimbus-eth2/pull/3639
2022-07-26 20:53:16 +00:00
* A crash triggered by the use of Web3Signer remote keystores:
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nimbus-eth2/pull/3616
2022-07-26 20:53:16 +00:00
* A rare crash triggered when Nimbus is performing a large number of concurrent HTTP requests:
2022-05-17 20:09:30 +00:00
https://github.com/status-im/nim-chronos/pull/272
https://github.com/status-im/nim-chronos/pull/273
2022-04-12 v22.4.0
2022-04-11 21:02:28 +00:00
==================
Nimbus `v22.4.0` is a `low-urgency` upgrade which brings with it further optimisations, and better user experience around [trusted node sync](https://nimbus.guide/trusted-node-sync.html). It lays the foundations for upcoming the merge hard-fork which will be fully supported in our next release (`v22.5.0`).
### Improvements:
2022-07-26 20:53:16 +00:00
* All CPU cores are now used by default: previously enabled by passing `--num-threads:0` on the command-line:
2022-04-11 21:02:28 +00:00
https://github.com/status-im/nimbus-eth2/pull/3493
2022-07-26 20:53:16 +00:00
* 250 MB reduction in memory usage: thanks to more efficient data structures for the finalized portion of the chain history:
2022-04-11 21:02:28 +00:00
https://github.com/status-im/nimbus-eth2/pull/3513
2022-07-26 20:53:16 +00:00
* Higher performance historic queries (using REST API) after trusted node sync: Nimbus now re-indexes the backfilled chain of blocks:
2022-04-11 21:02:28 +00:00
https://github.com/status-im/nimbus-eth2/pull/3452
2022-07-26 20:53:16 +00:00
* Broadcasted attestations are more likely to be included in blocks by other nodes: thanks to a tweak to the attestation sending time:
2022-04-11 21:02:28 +00:00
https://github.com/status-im/nimbus-eth2/pull/3518
2022-07-26 20:53:16 +00:00
* The REST API now *only* returns current and relevant information in response to VC queries: in other words, information from the recent non-finalized portion of the chain history:
2022-04-11 21:02:28 +00:00
https://github.com/status-im/nimbus-eth2/pull/3538
2022-07-26 20:53:16 +00:00
* Better and more consistent gossip mesh health: the `--max-peers` option now works as a target that can be exceeded by the client temporarily in order to maintain good gossip mesh health; the newly introduced `--hard-max-peers` option now acts as the hard limit that should not be exceeded (default set to `max-peers * 1.5`):
2022-04-11 21:02:28 +00:00
https://github.com/status-im/nimbus-eth2/pull/3346
2022-07-26 20:53:16 +00:00
* An [ERA files](https://our.status.im/nimbus-update-march/#era-files-a-proposed-solution-to-historical-data-queries) developer preview: ERA files are an ultra-efficient long-term storage format for finalized chain history:
2022-04-11 21:02:28 +00:00
https://github.com/status-im/nimbus-eth2/blob/unstable/docs/e2store.md
### We've fixed:
* Nimbus no longer crashes when a HTTP URL is specified as a `--web3-url` end-point:
https://github.com/status-im/nimbus-eth2/pull/3582
* The REST end-point `/eth/v1/beacon/headers` is now able to return backfilled blocks:
https://github.com/status-im/nimbus-eth2/pull/3472
* The Nimbus status bar has been disabled on Windows in order to avoid sporadic hangs in certain terminal emulators:
https://github.com/status-im/nimbus-eth2/pull/3484
* A large start-up delay after backfilling:
https://github.com/status-im/nimbus-eth2/pull/3516
* A rare problem which prevented the node from starting successfully after a trusted node sync:
https://github.com/status-im/nimbus-eth2/pull/3517
* Confusing error messages when Nimbus lacks the necessary file system permissions to create its database:
https://github.com/status-im/nimbus-eth2/pull/3536
### Removed functionality:
* The support for the Pyrmont testnet has been removed in order to reduce the Nimbus binary size:
https://github.com/status-im/nimbus-eth2/pull/3568
2022-03-10 17:14:56 +00:00
2022-03-10 v22.3.0
2022-03-07 13:42:20 +00:00
==================
2022-03-10 17:14:56 +00:00
Nimbus `v22.3.0` is a `low-urgency` upgrade that marks the beginning of a more predictable release cadence for Nimbus. Going forward, we'll be publishing a new release each month, following a feature freeze period with intensified testing and monitoring of the introduced code changes on our dispersed fleet of mainnet validators.
2022-03-07 13:42:20 +00:00
> Please note that the new versioning scheme is tied to the calendar. The number 22 indicates the year of the release (2022), while 3 is the month (March). The last digit is the patch number of the release and it will have a non-zero value only when we ship a hotfix during the month.
2022-07-26 20:53:16 +00:00
### Improvements
2022-03-07 13:42:20 +00:00
2022-07-26 20:53:16 +00:00
* Nimbus can now run as a service on Windows: use the `--run-as-service` flag:
2022-03-07 13:42:20 +00:00
https://github.com/status-im/nimbus-eth2/pull/3441
2022-07-26 20:53:16 +00:00
* All command-line options can now be provided in a configuration file: use the `--config-file` flag:
2022-03-07 13:42:20 +00:00
https://github.com/status-im/nimbus-eth2/pull/3442
https://nimbus.guide/options.html
2022-03-07 13:42:20 +00:00
2022-07-26 20:53:16 +00:00
* Lower CPU and bandwidth usage, thanks to better handling of already-seen attestation aggregates:
2022-03-07 13:42:20 +00:00
https://github.com/status-im/nimbus-eth2/pull/3439
2022-07-26 20:53:16 +00:00
* Reduced memory usage for nodes bootstrapped with [trusted node sync](https://nimbus.guide/trusted-node-sync.html):
2022-03-07 13:42:20 +00:00
https://github.com/status-im/nimbus-eth2/pull/3429
### We've fixed:
* Reduced performance on Windows due to the use of a less efficient method for collecting stack traces
https://github.com/status-im/nimbus-eth2/pull/3466
2022-03-10 17:14:56 +00:00
* Non-spec-compliant URLs in the [Keymanager APIs](https://nimbus.guide/keymanager-api.html) for handling remote keystores
2022-03-07 13:42:20 +00:00
https://github.com/status-im/nimbus-eth2/commit/4c01b777736f0d5d6fe38b37a4349741f6944e4c
2022-03-10 17:14:56 +00:00
* Extremely slow [slashing DB import](https://nimbus.guide/migration.html#step-4---import-your-slashing-protection-history) for validators with long validation history: the import should be nearly instant now
2022-03-07 13:42:20 +00:00
https://github.com/status-im/nimbus-eth2/pull/3393
2022-03-10 17:14:56 +00:00
* Validator index-out-of-bounds crash that was triggered upon certain requests to the `/eth/v1/beacon/states/{state_id}/validators/{validator_id}` API
https://github.com/status-im/nimbus-eth2/issues/3463
* An off-by-one logic error preventing sync committee messages to be published in the first slot of each sync committee period
https://github.com/status-im/nimbus-eth2/pull/3470/commits/542e645bedec7702a973dc5cdaae87175e353009
2022-03-07 13:42:20 +00:00
### Deprecated features:
2022-03-10 17:14:56 +00:00
- The [JSON-RPC](https://nimbus.guide/api.html) service (`--rpc` flag) option is now deprecated. It's scheduled for removal in version `v22.6` (i.e. June of this year). If you are currently relying on the JSON-RPC API, please consider switching to the official [REST API](https://nimbus.guide/rest-api.html).
2022-03-07 13:42:20 +00:00
2022-02-15 20:54:35 +00:00
2022-02-15 v1.7.0
=================
Nimbus `v1.7.0` is a `low-urgency` feature-packed upgrade, which brings support for [trusted node sync](https://nimbus.guide/trusted-node-sync.html) (also known as checkpoint sync) and HTTPS web3 providers.
Of particular note: the [Keymanager API](https://nimbus.guide/keymanager-api.html) now supports remote keystores (a.k.a web3signer keystores).
2022-07-26 20:53:16 +00:00
### Breaking changes:
2022-02-15 20:54:35 +00:00
- Nimbus will no longer rewrite HTTP(S) web3 URLs to their respective WebSocket alternatives. Please review your setup to ensure you are using the desired web3 end-point.
- The peer scoring has been further tuned. As such the `--max-peers` should not be set below 70. Note that Lowering `max-peers` does not significantly improve bandwidth usage, but does increase the risk of missed attestations.
### Improvements:
2022-07-26 20:53:16 +00:00
* [Trusted node sync](https://nimbus.guide/trusted-node-sync.html):
https://github.com/status-im/nimbus-eth2/pull/3326
* Full support for HTTP and HTTPS web3 URLs:
https://github.com/status-im/nimbus-eth2/pull/3354
* Nimbus now treats the first `--web3-url` as a primary and preferred web3 provider. Any extra URLs are treated as fallback providers (to be used only when the primary is offline). As soon as the primary is usable again, Nimbus will switch back to it.
* The Keymanager API now supports management of remote keystores (also known as web3signer keystores):
https://github.com/status-im/nimbus-eth2/pull/3360
* The typical memory usage of Nimbus on mainnet is now below 1GB:
https://github.com/status-im/nimbus-eth2/pull/3293
* 128MB of savings come from exploiting a provision in the official spec, which allows clients to respond with only non-finalized blocks to network queries which request blocks by their root hash.
* Faster beacon node startup-times:
https://github.com/status-im/nimbus-eth2/pull/3320
2022-08-22 22:11:29 +00:00
2022-07-26 20:53:16 +00:00
* The REST API is now compatible with CORS-enabled clients (e.g. browsers):
https://github.com/status-im/nimbus-eth2/pull/3378
2022-08-22 22:11:29 +00:00
2022-07-26 20:53:16 +00:00
* Use the `--rest-allow-origin` and/or `--keymanager-allow-origin` parameters to specify the allowed origin.
2022-02-15 20:54:35 +00:00
* A new `--rest-url` parameter for the `deposits exit` command: https://github.com/status-im/nimbus-eth2/pull/3344, https://github.com/status-im/nimbus-eth2/pull/3318
2022-07-26 20:53:16 +00:00
* You can now issue exits uing any beacon node which provides the [official REST API](https://nimbus.guide/rest-api.html). The Nimbus-specific [JSON-RPC API](https://nimbus.guide/api.html) will be deprecated in our next release, with a view to completely phasing it out over the next few months.
2022-02-15 20:54:35 +00:00
* The REST API will now returns JSON data by default which simplifies testing the API with `curl`.
2022-08-22 22:11:29 +00:00
2022-07-26 20:53:16 +00:00
* The notable exception here is when the client requests SSZ data by supplying an `Accept: application/octet-stream` header.
* Fairer request capping strategy for block sync requests and reduced CPU usage when serving them:
https://github.com/status-im/nimbus-eth2/pull/3358
2022-02-15 20:54:35 +00:00
* More accurate Nim GC memory usage metrics.
2022-07-26 20:53:16 +00:00
* BLST upgrade (latest version):
https://github.com/status-im/nimbus-eth2/pull/3364
* The `web3 test` command now provides more data about the selected provided:
https://github.com/status-im/nimbus-eth2/pull/3354
2022-02-15 20:54:35 +00:00
### We've fixed:
* Unnecessary CPU and bandwidth usage: https://github.com/status-im/nimbus-eth2/pull/3308
* The result of staying subsribed to sync committee topics even when there were no validators in the committee.
* Excessive logging on beacon nodes with large numbers of validators (in particular, those with `--validator-monitor-totals` enabled): https://github.com/status-im/nimbus-eth2/pull/3332
* Deviations from the spec in the REST API; this led to sub-optimal performance when Nimbus was paired with Vouch.
* Naming inconsistencies in the "totals" metrics (this was produced by the [validator monitor](https://nimbus.guide/validator-monitor.html)).
* Non-compliant implementation of the `/eth/v1/node/health` API (we were not producing HTTP status codes as mandated by the spec).
* Unnecessary restarts of the Eth1 syncing progress when the web3 provider connection was lost during sync: https://github.com/status-im/nimbus-eth2/pull/3354
2022-01-14 11:52:06 +00:00
2022-01-14 v1.6.0
=================
Nimbus `v1.6.0` is a `low-urgency` performance optimisation release with improved peer management.
`v1.6.0` adds support for the `Keymanager` API (currently in BETA):
https://nimbus.guide/keymanager-api.html
As well as a comprehensive set of metrics for validator performance monitoring:
2022-04-11 21:02:28 +00:00
https://nimbus.guide/validator-monitor.html
2022-01-14 11:52:06 +00:00
2022-04-11 21:02:28 +00:00
### Improvements:
2022-01-14 11:52:06 +00:00
* Tuned peer management: reduces the likelihood of missed attestations
* If you've seen frequent "No peers for topic" in your logs, this release will help
* Improved buffer management in the networking layer: reduces both CPU and memory usage.
* Further optimised batch verification of gossip messages: provides a 2-fold improvement in throughput.
* Comprehensive set of metrics for live validator performance monitoring in Grafana and support for producing detailed historic reward analysis in `ncli_db` (note that `ncli_db` is available only when compiling from source at the moment).
* Support for the new Keymanager API: add, remove, and migrate validators on the fly (BETA).
* Blazingly fast historical traversals in the REST API for beacon chain data mining: state caching brings up to a 10x speed-up in some common usage patterns (e.g. obtaining historic data slot by slot or epoch by epoch).
* 3x speed-up in snappy compression and decompression.
* Support for obtaining JSON payloads from the REST API.
2021-12-03 18:04:38 +00:00
2021-12-03 v1.5.5
=================
Nimbus `v1.5.5` is a `medium-urgency` bugfix release which contains a number of significant optimisations; of particular note is a **6x speed-up in epoch processing** and **2x speed up in Altair block processing**.
In addition, `v1.5.5` adds support for the `web3signer` protocol (currently in BETA).
### We've fixed:
* The potential for missed block proposals when a third-party validator client (with at least one imported validator) is used with a Nimbus beacon node (with no imported validators)
* The web3 connection not being enabled when running third-party validator clients
* A rare condition in which the REST service becomes unavailable.
* Inappropriate error messages produced by the REST API: when a validator client is publishing the same attestations or sync committee messages through multiple beacon nodes.
### Improvements:
* 6x speed-up in epoch processing: https://github.com/status-im/nimbus-eth2/pull/3089
* 2x speed up in Altair block processing: https://github.com/status-im/nimbus-eth2/pull/3115
* A 12% (minimum) reduction in the outgoing GossipSub traffic: https://github.com/status-im/nimbus-eth2/pull/3112
* Across the board performance improvements in the REST API: https://github.com/status-im/nimbus-eth2/pull/3092
* The REST API can now report sync committee information for the next sync period: https://github.com/status-im/nimbus-eth2/pull/3133
* Added support for the web3signer protocol (beta release):
https://github.com/status-im/nimbus-eth2/pull/3077
2021-11-10 10:55:57 +00:00
2021-11-09 v1.5.4
2021-11-09 14:09:51 +00:00
=================
2021-11-10 10:55:57 +00:00
Nimbus `v1.5.4` is a `medium-urgency` hotfix release. It addresses an important issue which, in rare cases, can lead to the loss of attestations and sync committee messages. This can, in turn, lead to a reduction in rewards.
2021-11-09 14:09:51 +00:00
Please upgrade at your earliest convenience.
### We've fixed:
* A rare issue during the construction of sync committee contributions: invalid BLS aggregate signatures were being produced under certain conditions; this had the potential to negatively affect the peer score of the node, and impact its ability to deliver gossip messages.
* A non-spec-compliant implementation of the `/eth/v1/validator/duties/sync/{epoch}` REST API.
* A crash in the `/eth/v2/debug/beacon/states` REST API call on systems with limited stack space.
### Improvements:
* A nice little performance improvement for block verification and replay.
* Improved error messages in the REST API.
* The `/eth/v1/config/spec` REST API now returns more information regarding spec config parameters.
## Other notable changes:
* The `--log-file` option is now deprecated and may be removed in a future release (if you wish to log to a file, we recommend redirecting the standard output).
2021-12-03 18:04:38 +00:00
2021-11-10 10:55:57 +00:00
Please note that the --log-file option was previously supported only when Nimbus was built from source. If your existing configuration used the --log-file option with a binary release, upgrading to v1.5.4 will enable the log file creation (though a deprecation warning will be printed on start-up).
2021-11-09 14:09:51 +00:00
2021-10-21 01:11:56 +00:00
2021-10-21 v1.5.2
=================
Nimbus `v1.5.2` is a `high-urgency` release for all users who haven't yet upgraded to the `v1.5.x` series
which add support for the upcoming beacon chain Altair hard-fork.
Please upgrade as soon as possible - **before the 27th of October**.
For users already running `v1.5.1`, the release brings a number of important bug fixes and optimizations
and upgrading is still highly recommended.
## Notable changes
### Improvements:
* Faster ramp up of peers when starting the beacon node.
* Added new metrics for keeping track of dropped gossip messages:
https://github.com/status-im/nimbus-eth2/commit/bf6ad41d7dfd0899527a0374009a3fcf2a32361b
* The run-*-node.sh scripts provided in out Github repository will now enable the
--rest and --metrics options by default.
### We've fixed:
* Potential crashes triggered by certain JSON-RPC and REST API requests.
* Unnecessary source of syncing time when the beacon node is restarted after the Altair transition.
* Certain non spec-compliant responses of the REST API.
2021-10-11 v1.5.1
2021-10-10 12:09:36 +00:00
=================
Nimbus `v1.5.1` is a `high-urgency` release for all users who have already upgraded to `v1.5.0`. It fixes a deposit contract syncing issue manifesting as the warning message "Eth1 chain not synced". Under specific circumstances, such a failure to sync the Eth1 chain may result in missed Eth2 block proposals, so affected users are advised to upgrade as soon as possible.
For anyone still running Nimbus v1.4.x or earlier, migrating to v1.5.1 continues to be a `medium-urgency` but *mandatory* upgrade that must be installed **before October 27th**.
2021-10-04 18:56:35 +00:00
2021-10-04 v1.5.0
=================
Nimbus `v1.5.0` is a `medium-urgency` but *mandatory* upgrade which adds support for the upcoming beacon chain Altair hard-fork.
Please upgrade at your earliest convenience - **before the 27th of October**.
> **N.B** You must upgrade before October 27th in order to follow the mainnet beacon chain. Failure to do so will result in downtime penalties.
This is the first hard fork for the beacon chain, and while a significant amount of testing has been conducted in the run up to this release, we recommend users regularly monitor our announcement channels ([discord]() and/or the [newsletter]()) for potential updates.
To celebrate the feature complete release candidate of our REST API, we've opened up the ports on some of our fleet nodes - don't do this at home ;)
In order to interact with these, you should point your apps and tools to:
* http://unstable.mainnet.beacon-api.nimbus.team/ - `mainnet` data, the latest `unstable` [branch](https://github.com/status-im/nimbus-eth2/tree/unstable)
* http://unstable.prater.beacon-api.nimbus.team/ - `prater` testnet data, the [latest](http://unstable.mainnet.beacon-api.nimbus.team/eth/v1/node/version) `unstable` [branch](https://github.com/status-im/nimbus-eth2/tree/unstable)
Note that right now these are very much unstable testing instances. They may be unresponsive at times - so **please do not rely on them for validation**. We may also disable them at any time.
--------------
### Notable changes
* Support for the Altair hard fork and the [latest Ethereum consensus spec](https://github.com/ethereum/consensus-specs/releases/tag/v1.1.1) (`v1.1.1`)
* Our [REST API](https://nimbus.guide/rest-api.html) is now feature complete, supporting the full [Beacon API](https://ethereum.github.io/beacon-APIs/) specification. This API should not be exposed to the public Internet as it includes multiple endpoints which could open your node to denial-of-service (DoS) attacks.
* Known limitations: To use the REST API with a validator client, you need to enable the `--subscribe-all-subnets` option. This requirement will be removed in future versions.
* A new experimental `--num-threads=X` option allows Nimbus to take advantage of multiple CPU cores when verifying attestations. Set it to `1` to use one worker thread, `2` for two worker threads, etc. The default value is set to `1` in this release, but future versions will set it to `0` (this tells the client to use as many worker threads as there are CPU cores available). N.B .**enabling anything other than `1` is considered experimental** at this stage.
* Improved peer discovery logic that ensures good connectivity to all gossip subnets.
* A new `version` metric that makes it easy to keep track of client upgrades within Grafana dashboards.
* New metrics `libp2p_peers_identity`, `libp2p_peers_traffic_read_total`, `libp2p_peers_traffic_write_total`, subdivided through Prometheus labels by the client type of the peer (i.e. nimbus, prysm, teku, lodestar or lighthouse).
* BLST has been upgraded to the latest version (`v0.3.5`).
* The `--network` option now accepts a directory with custom network metadata in the format of the [eth2-testnets](https://github.com/eth2-clients/eth2-networks) repository. The `SECONDS_PER_SLOT` configuration value remains the only setting that must be supplied at compile-time through the `-d:SECONDS_PER_SLOT=X` nim compilation flag.
2021-08-05 11:28:17 +00:00
2021-07-10 v1.4.2
=================
Nimbus `v1.4.2` - "Upgrade procedure: Hotfix release"
This release is marked as `low-urgency` for all Nimbus users other than those who have recently updated to `v1.4.1` from a version earlier than `v1.1.0` - for these users this is a `high-urgency` release.
## Notable changes
This release fixes an issue in the upgrade procedure when upgrading from a version earlier than `1.1.0` to `1.4.x`.
**How can I tell if I've been affected?**
If you've already upgraded to `1.4.1`, you can tell that you've been affected if you're seeing the following` WRN log`:
```
Received invalid sequence of blocks
```
To re-iterate, this issue only affects users who are upgrading from `1.0.12` or earlier (released on `2021-03-10`), **and have not run any release in between**. Everyone else can ignore this release.
2021-07-10 13:18:32 +00:00
2021-07-10 v1.4.1
=================
Nimbus v1.4.1 - "Every attestation counts"
This release is marked as `low-urgency`
## Notable changes
Nimbus `v1.4.0` users might have noticed that they are missing a small number of (seemingly random) attestations since the update. Our investigation into the matter has showed that, due to `v1.4.0`'s significant performance improvements, Nimbus validators occasionally send their first attestation for a new epoch before some peers are ready. These "slow" peers end up dropping early attestations because they're busy with the epoch transition.
It's a rare occurrence, since it requires a validator to be scheduled to attest in the first slot of an epoch *and* for the beacon node to only be connected to "slow" peers for the respective libp2p topic. If both these conditions are true, a premature attestation may be lost in time, like tears in the rain.
As a fix, we are using a larger send delay: [#2705](https://github.com/status-im/nimbus-eth2/pull/2705).
Fo those Nimbus `v1.4.0` users who are concerned about reaching optimal attestation effectiveness, we encourage you to upgrade as soon as possible.
Other changes include log flushing and metrics fixes.
Full list:
- increase attestation wait time ([#2705](https://github.com/status-im/nimbus-eth2/pull/2705))
- ensure logs are printed without delays ([#2669](https://github.com/status-im/nimbus-eth2/pull/2669))
- fix metrics on Windows ([#2707](https://github.com/status-im/nimbus-eth2/pull/2707))
2021-08-05 11:28:17 +00:00
2021-06-21 12:02:12 +00:00
2021-06-21 v1.4.0
=================
This release is marked as low-urgency - please update at your convenience.
It contains **improvements to attestation effectiveness and CPU usage**.
It also contains **improvements to the RPC APIs**, as suggested by DappNode and RocketPool, and in preparation for our refactored validator client.
### Outdated Nimbus instances
A reminder that if you're running Nimbus with a version prior to `1.0.10` (March 2021) you are exposed to a vulnerability in our core cryptography library (this library is used by all eth2 clients). See this [blst security advisory](https://github.com/supranational/blst/security/advisories/GHSA-x279-68rr-jp4p) for more information. If this concerns you, please update as soon as you can.
## Notable changes
### We've added:
* Nightly builds for the very adventurous. (https://github.com/status-im/nimbus-eth2/pull/2640)
* We expect users of nightly builds to be comfortable providing debugging logs.
### We've fixed:
* RPC API endpoints (https://github.com/status-im/nimbus-eth2/pull/2585, https://github.com/status-im/nimbus-eth2/pull/2586)
* `/eth/v1/beacon/pool/attestations`
* `/api/eth/v1/validator/aggregate_and_proofs`
* Doppelganger detection: fixed false positive on fast restart (https://github.com/status-im/nimbus-eth2/pull/2656/)
### We've improved
* Database read performance improvements during epoch transitions and startup (https://github.com/status-im/nimbus-eth2/pull/2639, https://github.com/status-im/nimbus-eth2/pull/2617)
* Better usage of caches, specially when validating attestations (https://github.com/status-im/nimbus-eth2/pull/2631)
2021-05-19 06:38:13 +00:00
2021-05-17 v1.3.0
=================
This release offers safer and easier options to migrate to Nimbus from other clients.
It also brings further performance optimizations.
**We've added:**
* A new `slashingdb` sub-command with `import` and `export` options. This allows for
safely migrating to Nimbus from another client (as per the [EIP-3076](https://eips.ethereum.org/EIPS/eip-3076)
slashing protection interchange format).
Please see the the newly prepared [migration guides](https://nimbus.guide/migration.html) for the details.
* A new `ncli_db validatorPerf` command. This can be used to perform a textual
report for the attestation performance of a particular validator
(please note that `ncli_db` is available only when compiling from source).
* Official binaries for macOS (AMD64 and ARM64).
* Pruning of the slashing protection database and a transition to more optimal
queries. This results in a significant reduction in both disk and CPU usage
on nodes running a large number of validators.
* More consistent level of validation for the attestations received from
third-party sources and the JSON-RPC and REST APIs. This prevents invalid
attestations from being broadcasted to the network.
* Performance tuning of attestation subnet transition timings and state
snapshotting intervals. This results in improved CPU and bandwidth usage.
**We've fixed:**
* Problems in the GossipSub subnet walking logic leading to unnecessary bandwidth
and CPU costs.
2021-05-03 08:13:12 +00:00
2021-05-03 v1.2.2
=================
This is a bugfix release improving the stability of the REST API and addressing
issues discovered during the mainnet deposit processing accident of 24-25 April.
**New features:**
* More efficient attestation processing pipeline using less queuing.
**We've fixed:**
* Insufficient validation of third-party Eth1Data votes.
* Sporadic REST API connection interruptions resulting from large request or
result payloads.
* Incorrectly sent empty GossipSub IWANT messages.
2021-04-20 13:55:37 +00:00
2021-04-20 v1.2.1
=================
This is a hotfix release that solves the database migration issue highlighted
in the previous release -- this problem affected new Nimbus users who used
v1.1.0 to sync with the network from genesis, essentially resetting their
2021-04-20 17:06:40 +00:00
state database and causing them to start re-syncing from genesis.
If you have used an older version of Nimbus prior to upgrading to v1.1.0,
you should not be affected.
If you were affected, you have a couple of options available to you:
1) If you have backed-up your database prior to upgrading to v1.2.0, you
can restore the database from backup and execute the migration successfully
after upgrading to this release.
2) If you haven't backed up your database, you can upgrade to this release at
your convenience; rest assured it won't delete your sync history.
Please accept our sincerest apologies for any inconvenience we may have caused.
We are reviewing our release testing policies to ensure that we cover a greater
number of possible upgrade paths going forward.
2021-04-20 13:55:37 +00:00
2021-04-19 16:54:24 +00:00
2021-04-19 v1.2.0
=================
If [`v1.1.0`](https://github.com/status-im/nimbus-eth2/releases/tag/v1.1.0)
was the big I/O update, `v1.2.0` is all about the CPU - together, these
updates help secure Nimbus against future network growth, and provide us
with a higher security margin and substantial [profitability improvements]
(https://twitter.com/ethnimbus/status/1384071918723092486).
2021-04-20 17:06:40 +00:00
To highlight just one data point, CPU usage has been cut by up to 50% over
v1.1.0 ( 🙏 batched attestation processing). This makes it the first release
we can officially recommend for validating on a Raspberry Pi 4.
2021-04-19 16:54:24 +00:00
> **N.B.** this release contains a **critical stability fix** so please
**make sure you upgrade!**
**New features:**
* Beta support for the official Beacon Node REST API:
https://ethereum.github.io/eth2.0-APIs/. Enable it by launching
the client with the `--rest:on` command-line flag
* Batched attestation verification and other reforms **->** massive
reduction in overall CPU usage.
* Improved attestation aggregation logic **->** denser aggregations
which in turn improve the overall health of the network and improve
block production.
* More efficient LibP2P connection handling code **->** reduction in
overall memory usage.
**We've fixed:**
* A critical stability issue in attestation processing.
* `scripts/run-*-node.sh` no longer prompts for a web3 provider URL
when the `--web3-url` command-line option has already been specified.
2021-05-03 08:13:12 +00:00
2021-04-05 v1.1.0
=================
2021-04-19 16:54:24 +00:00
This release brings planned reforms to our database schema that provide
substantial performance improvements and pave the way for an an improved
doppelganger detection ready immediately to propose and attest to blocks
(in a future release).
2021-04-19 16:54:24 +00:00
Please be aware that we will remain committed to maintaining backwards
compatibility between releases, but **this release does not support
downgrading back to any previous 1.0.x release**.
2021-04-19 16:54:24 +00:00
As a safety precaution, we advise you to **please backup your Nimbus
database before upgrading** if possible.
**New features:**
2021-04-19 16:54:24 +00:00
* More efficient state storage format ==> reduced I/O load and lower
storage requirements.
2021-04-19 16:54:24 +00:00
* More efficient in-memory cache for non-finalized states ==> significant
reduction in memory usage.
2021-04-19 16:54:24 +00:00
* More efficient slashing database schema ==> scales better to a larger
number of validators.
2021-04-19 16:54:24 +00:00
* The metrics support is now compiled by default thanks to a new and
more secure HTTP back-end.
2021-04-19 16:54:24 +00:00
* Command-line tools for generating testnet keystores and JSON deposit
files suitable for use with the official network launchpads.
2021-04-19 16:54:24 +00:00
* `setGraffiti` JSON-RPC call for modifying the graffiti bytes of the
client at run-time.
* `next_action_wait` metric indicating the time until the next scheduled
attestation or block proposal.
2021-04-19 16:54:24 +00:00
* More convenient command-line help messages providing information
regarding the default values of all parameters.
2021-04-19 16:54:24 +00:00
* `--direct-peer` gives you the ability to specify gossip nodes
to automatically connect to.
* Official docker images for ARM and ARM64.
* Support for fallback `--web3-url` providers.
**We've fixed:**
* Long processing delays induced by database pruning.
2021-04-19 16:54:24 +00:00
* File descriptor leaks (which manifested after failures of the selected
web3 provider).
2021-04-19 16:54:24 +00:00
* The validator APIs now return precise actual balances instead of rounded
effective balances.
2021-04-19 16:54:24 +00:00
* A connection tracking problem which produced failed outgoing connection
attempts.
**Breaking changes:**
2021-04-19 16:54:24 +00:00
* Nimbus-specific JSON-RPCs intended for debug purposes now have
the `debug_` prefix:
- `getGossipSubPeers` is now `debug_getGossipSubPeers`
- `getChronosFutures` is now `debug_getChronosFutures`
2021-03-24 01:23:14 +00:00
2021-03-10 v1.0.12
==================
This is bugfix release correcting an error in the Prater testnet config
leading to incorrect Eth1 voting.
2021-03-22 17:25:34 +00:00
2021-03-10 v1.0.11
==================
This is a minor release adding support for connecting to the Prater testnet.
2021-03-10 21:05:14 +00:00
2021-03-10 v1.0.10
==================
2021-03-08 23:14:50 +00:00
2021-03-10 21:05:14 +00:00
This release contains important security and performance improvements.
2021-03-08 23:14:50 +00:00
-----
2021-03-10 21:05:14 +00:00
**Upgraded:**
2021-03-08 23:14:50 +00:00
2021-03-10 21:05:14 +00:00
* We're now running version 0.3.3 of the BLST library:
2021-03-08 23:14:50 +00:00
https://github.com/supranational/blst/releases/tag/v0.3.3
2021-03-10 21:05:14 +00:00
* We've switched to a more recent version of BearSSL
(this version features a more up-to-date list of trusted root certificates)
2021-03-08 23:14:50 +00:00
2021-03-10 21:05:14 +00:00
* We're now consistent with the v1.0.1 Eth2 spec
2021-03-08 23:14:50 +00:00
**We've fixed:**
2021-03-10 21:05:14 +00:00
* A frequent crash occurring on certain hardware configurations after
building Nimbus from source.
2021-03-08 23:14:50 +00:00
* Long processing delays triggered by the reception of attestations that
reference already pruned states.
2021-03-10 21:05:14 +00:00
* LibP2P peer management issue which led to an accumulation of inactive
2021-03-08 23:14:50 +00:00
connections.
* A false-positive in doppelganger detection triggered by rebroadcasted
older attestations arriving with a significant delay.
2021-03-10 21:05:14 +00:00
**New features**:
* A new improved format of the slashing protection database:
- Significantly reduces the disk load with a large number of validators (1000+).
2021-04-19 16:54:24 +00:00
- Makes it possible to enhance our doppelganger detection in the future
such that waiting for 2 epochs before attesting is not necessary.
2021-03-10 21:05:14 +00:00
2021-04-19 16:54:24 +00:00
To ensure smooth upgrade and emergency rollback between older and future
Nimbus versions, v1.0.10 will keep track of your attestation in both the
old and the new format. The extra load should be negligible for home
stakers.
2021-03-10 21:05:14 +00:00
2021-03-09 v1.0.9
=================
This version was an internal release candidate build for the 1.0.10 release.
2021-03-08 23:14:50 +00:00
2021-02-21 19:28:28 +00:00
2021-02-22 v1.0.8
=================
2021-02-22 15:36:54 +00:00
This release includes important JSON-RPC stability improvements
and compatibility fixes, which make it possible to use Nimbus
as a RocketPool operator.
2021-02-21 19:28:28 +00:00
-----
2021-02-22 15:36:54 +00:00
**New features:**
2021-02-21 19:28:28 +00:00
* RocketPool integration:
2021-02-22 15:36:54 +00:00
see https://github.com/rocket-pool/smartnode/pull/89
and https://github.com/rocket-pool/smartnode-install/pull/26/commits/da720acc8f4c1c31c05971748fbc144de1621830
2021-02-21 19:28:28 +00:00
2021-02-22 15:36:54 +00:00
* Next attestation time displayed on every "Slot end" log message
(helps you select the best time for restarting the node)
2021-02-21 19:28:28 +00:00
2021-02-22 15:36:54 +00:00
* libp2p scoring: disconnect from badly performing peers and prioritise
peers with better latency and throughput.
2021-02-21 19:28:28 +00:00
2021-02-22 15:36:54 +00:00
**We've fixed:**
* A rare crash triggered when connecting to a web3 provider using
a secure web socket.
2021-02-21 19:28:28 +00:00
* JSON-RPC spec violations and potential DoS attack vectors.
2021-02-22 15:36:54 +00:00
* Two stale bootstrap node addresses.
2021-02-21 19:28:28 +00:00
2021-02-04 15:28:54 +00:00
2021-02-04 v1.0.7
=================
2021-02-21 19:28:28 +00:00
A release which provides additional protection against accidental slashings
and further performance improvements across the board.
2021-02-04 15:28:54 +00:00
-----
2021-02-22 15:36:54 +00:00
**New features:**
2021-02-04 15:28:54 +00:00
2021-02-21 19:28:28 +00:00
* New slashing protection mechanism (doppelganger detection) prevents your
validator from contradicting itself if you have accidentally left it running
on another machine (see the `--doppelganger-detection` option).
2021-02-04 15:28:54 +00:00
2021-02-21 19:28:28 +00:00
* Optimized batching of BLS signature verification leading to faster sync
speeds and reduced CPU load.
2021-02-04 15:28:54 +00:00
2021-02-21 19:28:28 +00:00
* Further improvements to attestation subnet walking resulting in a reduction
in both bandwidth and CPU usage.
2021-02-04 15:28:54 +00:00
2021-02-21 19:28:28 +00:00
* A new `--subscribe-all-subnets` option allowing the node to maintain peers
from all attestation subnets (most suitable for bootstrap nodes).
2021-02-04 15:28:54 +00:00
* Official docker images published at https://hub.docker.com/r/statusim/nimbus-eth2
2021-02-21 19:28:28 +00:00
* Official Windows binaries created from a reproducible build recipe.
* An option to enable the automatic updating of IP:Port in the ENR
(off by default, specify `--enr-auto-update:true` to turn it on)
2021-02-04 15:28:54 +00:00
2021-02-22 15:36:54 +00:00
**We've fixed:**
2021-02-04 15:28:54 +00:00
* A bug that had the potential to completely halt all syncing activity.
2021-02-21 19:28:28 +00:00
* Inefficient processing of blocks with Eth1 deposits which occassionally
led to increased latencies when delivering attestations.
2021-02-04 15:28:54 +00:00
* Outdated records in our bootstrap nodes list.
2021-02-21 19:28:28 +00:00
* An Eth1 syncing issue which manifested itself as a "Corrupted deposits
history detected" error.
* Non-standard encoding of certain data types such as signatures and bit
sequences within the results of JSON-RPC requests.
2021-02-22 15:36:54 +00:00
**We've deprecated:**
2021-02-21 19:28:28 +00:00
* `make beacon_node` will no longer compile the beacon node.
You'll need to run `make nimbus_beacon_node` from now on
2021-02-04 15:28:54 +00:00
2021-02-21 19:28:28 +00:00
* On monday we'll phase out the old `master` branch. If you're still building
Nimbus from `master`, please switch to `stable`.
2021-02-04 15:28:54 +00:00
2021-01-10 10:22:02 +00:00
2021-01-10 v1.0.6
2021-01-08 23:14:20 +00:00
=================
2021-01-10 10:22:02 +00:00
A release that brings reproducible precompiled binaries for ARM devices and
2021-01-08 23:14:20 +00:00
significant performance improvements.
-----
2021-02-22 15:36:54 +00:00
**New features:**
2021-01-08 23:14:20 +00:00
* Reproducible build recipe for creating Nimbus Linux binaries intended for
ARM devices.
2021-01-10 10:22:02 +00:00
* Improved attestation subnet walking logic: this brings significant reductions
2021-01-08 23:14:20 +00:00
in bandwidth usage and CPU load.
2021-02-04 15:28:54 +00:00
* Better usage of the Sqlite3 checkpointing API (minor performance improvement).
2021-01-08 23:14:20 +00:00
2021-01-10 10:22:02 +00:00
* Larger window for the candidate attestations included in blocks: this can lead
to higher block rewards.
2021-01-08 23:14:20 +00:00
**We've fixed:**
* Incorrect `attnets` value announced in ENR records.
2021-01-10 10:22:02 +00:00
2021-01-09 v1.0.5
=================
The 1.0.5 release was retracted because it included a potential optimization
to the reproducible build scripts that turned out to create a buggy binary for
AMD64 systems. Manually built binaries through the Makefiles were not affected.
After fixing the problem, the release was re-published as 1.0.6 with the same
release notes.
2020-12-16 20:20:45 +00:00
2020-12-16 v1.0.4
=================
A release bringing further stability improvements and minor performance
optimisations.
-----
2021-02-22 15:36:54 +00:00
**New features:**
2020-12-16 20:20:45 +00:00
* Nimbus can now be safely shut down with the SIGTERM signal on POSIX systems.
* New discovery IP limits making theoretic eclipse attack much more costly.
* A new `make benchmarks` target for obtaining a performance score for your system.
* Upgrade of the BLST library bringing minor performance improvement.
**We've fixed:**
* Gossipsub resource leaks that may reduce the quality of the gossipsub mesh and
reduce the attestation effectiveness of the client.
* Incomplete validation of the forwarded attestations that may affect negatively
the peer score of Nimbus.
* An issue halting the activity of the Eth1 monitor.
* The incorrect zero validator balance displayed while the node is syncing.
* A regression preventing Nimbus to be used with custom testnet metadata files.
2020-12-10 00:55:40 +00:00
2020-12-09 v1.0.3
=================
A release fixing issues that have contributed to Nimbus's lower peer scores
on the network.
-----
2021-02-22 15:36:54 +00:00
**New features:**
2020-12-10 00:55:40 +00:00
* New metrics tracking the syncing progress of the Eth1 deposit contract
monitor.
* A new `web3 test` command for testing the compatibility of a web3 provider
before using it.
**We've fixed:**
* Incorrect timing when sending aggregated attestations.
* Stale ENR records not taking into account the dynamic attestation subnet
hopping.
* An invalid error message produced by the `deposits exit` command (validator
state unknown).
2020-12-03 17:17:15 +00:00
2020-12-03 v1.0.2
=================
A release that fixes an issue regarding the occasional missed block proposal.
Proposing a block is arguably the most important duty you have as a validator.
So it's important you update at your earliest convenience.
-----
2021-02-22 15:36:54 +00:00
**New features:**
2020-12-03 17:17:15 +00:00
* 8 new JSON-RPC calls that bring us to feature parity with the official
beacon node API.
**We've fixed:**
2020-12-10 00:55:40 +00:00
* A deposit merkle proofs generation issue occasionally resulting in missed
block proposals shortly after a new Eth1 head was selected.
2020-12-03 17:17:15 +00:00
* Slow status bar updates in the absense of logging messages.
2020-12-02 12:31:13 +00:00
2020-12-02 v1.0.1
=================
2020-12-03 17:17:15 +00:00
A release with a number of important fixes and optimisations.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
**Please update** at your earliest convenience.
In order to minimise downtime, we recommend updating and rebuilding
the beacon node **before restarting.**
-----
2021-02-22 15:36:54 +00:00
**New features:**
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* More conservative Eth1 syncing requests to reduce the likelihood of
going over the maximum allowed burst rates under the Infura free plan
(predominantly aimed at those running Nimbus on resource-restricted
device like Raspberry Pi's) + more resiliency in case of errors.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
**We've fixed:**
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* A "Only one concurrent read allowed" crash reported by multiple users.
2020-12-02 12:31:13 +00:00
* An error in the default configuration preventing the node from discovering
2020-12-03 17:17:15 +00:00
peers on mainnet unless the `--network=mainnet` flag was passed. Please note
that this not affect users starting their node with the `./run-mainnet-beacon-node`
command.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* The fractional part of the ETH balance in the Nimbus status bar
(the value displayed should now be correct).
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* An issue that occasionally caused the Eth1 syncing process to get stuck
before reaching the head of the chain.
2020-12-02 12:31:13 +00:00
* Unnecessary network traffic related to GossipSub `IHAVE`.
2020-12-03 17:17:15 +00:00
* Incorrect gossipsub pruning which occasionally resulted in messages
getting lost.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* An issue where an excessively long graffiti string could cause a crash on
startup.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* A Linux-only issue that resulted in the `deposits import` command ignoring
its supplied arguments.
2020-12-02 12:31:13 +00:00
2020-11-29 21:36:00 +00:00
2020-11-29 v1.0.0-stateofus
===========================
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
As promised, a slightly more polished release before Mainnet launch ✨
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
Please make sure you update to this release before Eth2 genesis this
Tuesday (December 1 12:00:23 UTC), as it contains some important improvements.
2020-11-29 14:13:34 +00:00
2020-12-10 00:55:40 +00:00
-----------------
2021-02-22 15:36:54 +00:00
**New features:**
2020-11-29 21:36:00 +00:00
* Updated list of bootstrap nodes for Mainnet.
* Prometheus metrics for validator balances. The beacon node will also
display the total balance of all attached validators in the status
footer by default.
* `deposits import` now automagically finds the `validator_keys` directory
produced by the `eth2.0-deposit-cli` if it is located in the same working
directory.
* A `deposits exit` command for submitting a voluntary validator exit.
* A `record` CLI command for inspecting and creating ENR records.
* An `--agent-string` option for specifying how Nimbus will present itself
in LibP2P messages. The default value is now `nimbus`.
* New RPC calls to track node and config status. Specifically, a JSON-RCP
call for inspecting the active config preset (`get_v1_config_spec`).
2020-12-10 00:55:40 +00:00
**We've fixed:**
2020-11-29 21:36:00 +00:00
* Inaccurate peer counts (an occasional mismatch between the number of
syncing peers and GossipSub peers) -- the default peer limit has been
increased to maintain a healthy gossip mesh.
* High bandwidth usage of GossipSub (due to sub-optimal caching and lack
of limits in the IWANT/IHAVE exchange messages) -- we're now using the
latest spec GossipSub parameters.
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
* High sync memory footprint -- we've reduced the number of sync workers
from 20 to 10 (note, this should not affect sync speed).
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
2020-11-25 v1.0.0-rc1
2020-11-25 01:36:02 +00:00
=====================
We're happy to join the other client teams in announcing our `v1.0.0` release
candidate with support for Mainnet ✨
You can use this release/binary to set up your rig and monitoring for Eth2
genesis next Tuesday (*December 1 12:00:23 UTC*).
> **N.B.** There will be at least one more release, before December 1st.
> In particular, **we are planning a more polished release for Sunday** which
> will act as a drop-in replacement for this release candidate.
Don't worry if your peer count appears low at first -- It should increase as
more validators connect to Mainnet.
-----------------
**Highlights include:**
* The addition of a deposit contract "state snapshot" to network metadata.
This allows the client to skip syncing deposits made prior to the snapshot.
* A much faster startup time. We've removed the deposits table from the database,
which means the client no longer needs to process all deposits on start-up.
* The Eth1 monitor no longer starts if the beacon node has zero validators attached to it.
* The genesis detection code is now optional and disabled by default.
* An RPC call to get Chronos futures at runtime.
* Eth2 spec gossip parameters.
**We've fixed:**
* A database corruption issue affecting Pyrmont nodes.
* Unnecessary copy/memory alloc when loading DbSeq entries.
2020-11-29 21:36:00 +00:00
* A block production issue affecting clients that hadn't finished downloading the latest deposits.
2020-11-25 01:36:02 +00:00
2020-11-20 20:31:03 +00:00
2020-11-20 v0.6.6
=================
2021-02-22 15:36:54 +00:00
**New features:**
2020-11-20 20:31:03 +00:00
* New RPC APIs for inspecting the internal state of the Eth1 monitor.
2021-02-22 15:36:54 +00:00
**We've fixed:**
2020-11-20 20:31:03 +00:00
* A fork-choice issue causing Nimbus to get stuck on a particular slot.
* A logic error causing Nimbus to vote for an incorrect Eth1 block.
* A crash during initialization when the web3 provider is refusing
to serve data (e.g. due to exceeded request quota).
2020-11-17 v0.6.4
=================
2021-02-22 15:36:54 +00:00
**New features:**
* Support for the Pyrmont testnet.
* The PCRE library is no longer necessary for building Nimbus.
* Sensitive files such as keystores are now accessible only to the
user of the beacon node on POSIX systems (the group rights have
been dropped).
2021-02-22 15:36:54 +00:00
**We've fixed:**
* An issue preventing blocks to be downloaded when the client goes
out of sync.
* Resource leaks that may lead to reduction of network activity due
to a build-up of malfunctioning peer connections.
2020-11-12 23:13:35 +00:00
2020-11-12 v0.6.2
=================
A bugfix release addressing issues discovered in the Toledo network.
2021-02-22 15:36:54 +00:00
**New features:**
2020-11-12 23:13:35 +00:00
* GossipSub 1.1
2020-11-12 23:13:35 +00:00
* The beacon node status bar (footer) now contains a
time-left-until-synced estimate.
2020-11-12 23:13:35 +00:00
* A JSON-RPC method `setLogLevel` for dynamically changing the
2020-11-12 23:13:35 +00:00
log level of selected components at run-time.
* The ability to launch Nimbus with a partially-synced Geth node.
2021-02-22 15:36:54 +00:00
**We've fixed:**
2020-11-12 23:13:35 +00:00
* A bug preventing the node from proposing blocks when connected
2020-11-12 23:13:35 +00:00
to a web3 provider
* An invalid "corrupted database" error message appearing on start-up
2020-11-12 23:13:35 +00:00
* Incorrectly set message-ids in gossip message causing other clients
2020-11-12 23:13:35 +00:00
to penalise and potentially disconnect our nodes from the network.
* An issue occuring when Nimbus is paired with a Geth node
that is not fully synced.
2020-11-12 23:13:35 +00:00
2020-11-09 Hope (v0.6.0)
========================
`Nimbus eth2` 0.6.0 was the first externally audited and stable release
of our beacon node software. When compared to the 0.5x series, it features
significant reductions in storage and memory requirements, a faster sync
speed, and a plethora of usability and security enhancements across the
board. Under normal network conditions, the delivery rate of attestations
and block proposals is expected to be above 99%. Going forward, our release
schedule will start to accelerate, with multiple new releases expected before
the Eth2 mainnet launch.
2021-02-22 15:36:54 +00:00
**Changelog highlights include:**
2020-11-12 23:13:35 +00:00
* Full support for the 1.0 Eth2 phase0 spec and the monitoring of the
mainnet validator deposit contract.
* LibP2P and GossipSub fixes which drastically improve the delivery of
attestations and blocks (nearly 100% expected rate of delivery).
* Fixes for all major resource leaks: you no longer need to restart your
node to improve its performance.
* Efficient caching and storage mechanisms: ensures our memory consumption
remains comparatively low both during smooth and turbulent network conditions.
* Several storage and networking optimisations leading to an order of magnitude
improvement in beacon chain sync speed.
* Audits to our codebase by ConsenSys Diligence, NCC Group and Trail of Bits.
More than 60 of the security findings have already been addressed.
The remaining items will be resolved before mainnet launch.
* Support for pairing with a locally running Geth instance to allow for
decentralised monitoring of the validator deposit contract.
* An extensive user guide for managing the beacon node.
* Slashing protection mechanisms + database.
* Support for storing the validator signing keys in a separate process, isolated
from the network, with a minimal attack surface.