nimbus-eth2/CHANGELOG.md

270 lines
8.5 KiB
Markdown
Raw Normal View History

2020-12-03 17:17:15 +00:00
2020-12-03 v1.0.2
=================
A release that fixes an issue regarding the occasional missed block proposal.
Proposing a block is arguably the most important duty you have as a validator.
So it's important you update at your earliest convenience.
-----
**New additions:**
* 8 new JSON-RPC calls that bring us to feature parity with the official
beacon node API.
**We've fixed:**
* A deposit merkle proofs generation issue which occasionally resulting
in missed block proposals shortly after a new Eth1 head was selected.
* Slow status bar updates in the absense of logging messages.
2020-12-02 12:31:13 +00:00
2020-12-02 v1.0.1
=================
2020-12-03 17:17:15 +00:00
A release with a number of important fixes and optimisations.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
**Please update** at your earliest convenience.
In order to minimise downtime, we recommend updating and rebuilding
the beacon node **before restarting.**
-----
**New additions:**
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* More conservative Eth1 syncing requests to reduce the likelihood of
going over the maximum allowed burst rates under the Infura free plan
(predominantly aimed at those running Nimbus on resource-restricted
device like Raspberry Pi's) + more resiliency in case of errors.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
**We've fixed:**
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* A "Only one concurrent read allowed" crash reported by multiple users.
2020-12-02 12:31:13 +00:00
* An error in the default configuration preventing the node from discovering
2020-12-03 17:17:15 +00:00
peers on mainnet unless the `--network=mainnet` flag was passed. Please note
that this not affect users starting their node with the `./run-mainnet-beacon-node`
command.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* The fractional part of the ETH balance in the Nimbus status bar
(the value displayed should now be correct).
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* An issue that occasionally caused the Eth1 syncing process to get stuck
before reaching the head of the chain.
2020-12-02 12:31:13 +00:00
* Unnecessary network traffic related to GossipSub `IHAVE`.
2020-12-03 17:17:15 +00:00
* Incorrect gossipsub pruning which occasionally resulted in messages
getting lost.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* An issue where an excessively long graffiti string could cause a crash on
startup.
2020-12-02 12:31:13 +00:00
2020-12-03 17:17:15 +00:00
* A Linux-only issue that resulted in the `deposits import` command ignoring
its supplied arguments.
2020-12-02 12:31:13 +00:00
2020-11-29 21:36:00 +00:00
2020-11-29 v1.0.0-stateofus
===========================
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
As promised, a slightly more polished release before Mainnet launch ✨
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
Please make sure you update to this release before Eth2 genesis this
Tuesday (December 1 12:00:23 UTC), as it contains some important improvements.
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
New additions:
* Updated list of bootstrap nodes for Mainnet.
* Prometheus metrics for validator balances. The beacon node will also
display the total balance of all attached validators in the status
footer by default.
* `deposits import` now automagically finds the `validator_keys` directory
produced by the `eth2.0-deposit-cli` if it is located in the same working
directory.
* A `deposits exit` command for submitting a voluntary validator exit.
* A `record` CLI command for inspecting and creating ENR records.
* An `--agent-string` option for specifying how Nimbus will present itself
in LibP2P messages. The default value is now `nimbus`.
* New RPC calls to track node and config status. Specifically, a JSON-RCP
call for inspecting the active config preset (`get_v1_config_spec`).
We've fixed:
* Inaccurate peer counts (an occasional mismatch between the number of
syncing peers and GossipSub peers) -- the default peer limit has been
increased to maintain a healthy gossip mesh.
* High bandwidth usage of GossipSub (due to sub-optimal caching and lack
of limits in the IWANT/IHAVE exchange messages) -- we're now using the
latest spec GossipSub parameters.
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
* High sync memory footprint -- we've reduced the number of sync workers
from 20 to 10 (note, this should not affect sync speed).
2020-11-29 14:13:34 +00:00
2020-11-29 21:36:00 +00:00
2020-11-25 v1.0.0-rc1
2020-11-25 01:36:02 +00:00
=====================
We're happy to join the other client teams in announcing our `v1.0.0` release
candidate with support for Mainnet ✨
You can use this release/binary to set up your rig and monitoring for Eth2
genesis next Tuesday (*December 1 12:00:23 UTC*).
> **N.B.** There will be at least one more release, before December 1st.
> In particular, **we are planning a more polished release for Sunday** which
> will act as a drop-in replacement for this release candidate.
Don't worry if your peer count appears low at first -- It should increase as
more validators connect to Mainnet.
-----------------
**Highlights include:**
* The addition of a deposit contract "state snapshot" to network metadata.
This allows the client to skip syncing deposits made prior to the snapshot.
* A much faster startup time. We've removed the deposits table from the database,
which means the client no longer needs to process all deposits on start-up.
* The Eth1 monitor no longer starts if the beacon node has zero validators attached to it.
* The genesis detection code is now optional and disabled by default.
* An RPC call to get Chronos futures at runtime.
* Eth2 spec gossip parameters.
**We've fixed:**
* A database corruption issue affecting Pyrmont nodes.
* Unnecessary copy/memory alloc when loading DbSeq entries.
2020-11-29 21:36:00 +00:00
* A block production issue affecting clients that hadn't finished downloading the latest deposits.
2020-11-25 01:36:02 +00:00
2020-11-20 20:31:03 +00:00
2020-11-20 v0.6.6
=================
New additions:
* New RPC APIs for inspecting the internal state of the Eth1 monitor.
We've fixed:
* A fork-choice issue causing Nimbus to get stuck on a particular slot.
* A logic error causing Nimbus to vote for an incorrect Eth1 block.
* A crash during initialization when the web3 provider is refusing
to serve data (e.g. due to exceeded request quota).
2020-11-17 v0.6.4
=================
New additions:
* Support for the Pyrmont testnet.
* The PCRE library is no longer necessary for building Nimbus.
* Sensitive files such as keystores are now accessible only to the
user of the beacon node on POSIX systems (the group rights have
been dropped).
We've fixed:
* An issue preventing blocks to be downloaded when the client goes
out of sync.
* Resource leaks that may lead to reduction of network activity due
to a build-up of malfunctioning peer connections.
2020-11-12 23:13:35 +00:00
2020-11-12 v0.6.2
=================
A bugfix release addressing issues discovered in the Toledo network.
New features include:
2020-11-12 23:13:35 +00:00
* GossipSub 1.1
2020-11-12 23:13:35 +00:00
* The beacon node status bar (footer) now contains a
time-left-until-synced estimate.
2020-11-12 23:13:35 +00:00
* A JSON-RPC method `setLogLevel` for dynamically changing the
2020-11-12 23:13:35 +00:00
log level of selected components at run-time.
* The ability to launch Nimbus with a partially-synced Geth node.
We've fixed:
2020-11-12 23:13:35 +00:00
* A bug preventing the node from proposing blocks when connected
2020-11-12 23:13:35 +00:00
to a web3 provider
* An invalid "corrupted database" error message appearing on start-up
2020-11-12 23:13:35 +00:00
* Incorrectly set message-ids in gossip message causing other clients
2020-11-12 23:13:35 +00:00
to penalise and potentially disconnect our nodes from the network.
* An issue occuring when Nimbus is paired with a Geth node
that is not fully synced.
2020-11-12 23:13:35 +00:00
2020-11-09 Hope (v0.6.0)
========================
`Nimbus eth2` 0.6.0 was the first externally audited and stable release
of our beacon node software. When compared to the 0.5x series, it features
significant reductions in storage and memory requirements, a faster sync
speed, and a plethora of usability and security enhancements across the
board. Under normal network conditions, the delivery rate of attestations
and block proposals is expected to be above 99%. Going forward, our release
schedule will start to accelerate, with multiple new releases expected before
the Eth2 mainnet launch.
Changelog highlights include:
* Full support for the 1.0 Eth2 phase0 spec and the monitoring of the
mainnet validator deposit contract.
* LibP2P and GossipSub fixes which drastically improve the delivery of
attestations and blocks (nearly 100% expected rate of delivery).
* Fixes for all major resource leaks: you no longer need to restart your
node to improve its performance.
* Efficient caching and storage mechanisms: ensures our memory consumption
remains comparatively low both during smooth and turbulent network conditions.
* Several storage and networking optimisations leading to an order of magnitude
improvement in beacon chain sync speed.
* Audits to our codebase by ConsenSys Diligence, NCC Group and Trail of Bits.
More than 60 of the security findings have already been addressed.
The remaining items will be resolved before mainnet launch.
* Support for pairing with a locally running Geth instance to allow for
decentralised monitoring of the validator deposit contract.
* An extensive user guide for managing the beacon node.
* Slashing protection mechanisms + database.
* Support for storing the validator signing keys in a separate process, isolated
from the network, with a minimal attack surface.