nimbus-eth2/tests/test_blockchain_dag.nim

1690 lines
65 KiB
Nim
Raw Normal View History

# beacon_chain
accelerate `getShufflingRef` (#4911) When an uncached `ShufflingRef` is requested, we currently replay state which can take several seconds. Acceleration is possible by: 1. Start from any state with locked-in `get_active_validator_indices`. Any blocks / slots applied to such a state can only affect that result for future epochs, so are viable for querying target epoch. `compute_activation_exit_epoch(state.slot.epoch) > target.epoch` 2. Determine highest common ancestor among `state` and `target.blck`. At the ancestor slot, same rules re `get_active_validator_indices`. `compute_activation_exit_epoch(ancestorSlot.epoch) > target.epoch` 3. We now have a `state` that shares history with `target.blck` up through a common ancestor slot. Any blocks / slots that the `state` contains, which are not part of the `target.blck` history, affect `get_active_validator_indices` at epochs _after_ `target.epoch`. 4. Select `state.randao_mixes[N]` that is closest to common ancestor. Either direction is fine (above / below ancestor). 5. From that RANDAO mix, mix in / out all RANDAO reveals from blocks in-between. This is just an XOR operation, so fully reversible. `mix = mix xor SHA256(blck.message.body.randao_reveal)` 6. Compute the attester dependent slot from `target.epoch`. `if epoch >= 2: (target.epoch - 1).start_slot - 1 else: GENESIS_SLOT` 7. Trace back from `target.blck` to the attester dependent slot. We now have the destination for which we want to obtain RANDAO. 8. Mix in all RANDAO reveals from blocks up through the `dependentBlck`. Same method, no special handling necessary for epoch transitions. 9. Combine `get_active_validator_indices` from `state` at `target.epoch` with the recovered RANDAO value at `dependentBlck` to obtain the requested shuffling, and construct the `ShufflingRef` without replay. * more tests and simplify logic * test with different number of deposits per branch * Update beacon_chain/consensus_object_pools/blockchain_dag.nim Co-authored-by: Jacek Sieka <jacek@status.im> * `commonAncestor` tests * lint --------- Co-authored-by: Jacek Sieka <jacek@status.im>
2023-05-12 17:36:59 +00:00
# Copyright (c) 2018-2023 Status Research & Development GmbH
# Licensed and distributed under either of
# * MIT license (license terms in the root directory or at https://opensource.org/licenses/MIT).
# * Apache v2 license (license terms in the root directory or at https://www.apache.org/licenses/LICENSE-2.0).
# at your option. This file may not be copied, modified, or distributed except according to those terms.
{.used.}
import
std/[random, sequtils],
unittest2,
taskpools,
../beacon_chain/el/merkle_minimal,
../beacon_chain/spec/datatypes/base,
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
../beacon_chain/spec/[beaconstate, forks, helpers, signatures, state_transition],
disentangle eth2 types from the ssz library (#2785) * reorganize ssz dependencies This PR continues the work in https://github.com/status-im/nimbus-eth2/pull/2646, https://github.com/status-im/nimbus-eth2/pull/2779 as well as past issues with serialization and type, to disentangle SSZ from eth2 and at the same time simplify imports and exports with a structured approach. The principal idea here is that when a library wants to introduce SSZ support, they do so via 3 files: * `ssz_codecs` which imports and reexports `codecs` - this covers the basic byte conversions and ensures no overloads get lost * `xxx_merkleization` imports and exports `merkleization` to specialize and get access to `hash_tree_root` and friends * `xxx_ssz_serialization` imports and exports `ssz_serialization` to specialize ssz for a specific library Those that need to interact with SSZ always import the `xxx_` versions of the modules and never `ssz` itself so as to keep imports simple and safe. This is similar to how the REST / JSON-RPC serializers are structured in that someone wanting to serialize spec types to REST-JSON will import `eth2_rest_serialization` and nothing else. * split up ssz into a core library that is independendent of eth2 types * rename `bytes_reader` to `codec` to highlight that it contains coding and decoding of bytes and native ssz types * remove tricky List init overload that causes compile issues * get rid of top-level ssz import * reenable merkleization tests * move some "standard" json serializers to spec * remove `ValidatorIndex` serialization for now * remove test_ssz_merkleization * add tests for over/underlong byte sequences * fix broken seq[byte] test - seq[byte] is not an SSZ type There are a few things this PR doesn't solve: * like #2646 this PR is weak on how to handle root and other dontSerialize fields that "sometimes" should be computed - the same problem appears in REST / JSON-RPC etc * Fix a build problem on macOS * Another way to fix the macOS builds Co-authored-by: Zahary Karadjov <zahary@gmail.com>
2021-08-18 18:57:58 +00:00
../beacon_chain/[beacon_chain_db],
../beacon_chain/consensus_object_pools/[
attestation_pool, blockchain_dag, block_quarantine, block_clearance],
./testutil, ./testdbutil, ./testblockutil
from ../beacon_chain/spec/datatypes/capella import
SignedBLSToExecutionChangeList
func `$`(x: BlockRef): string = shortLog(x)
2020-10-14 20:23:04 +00:00
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
const
nilPhase0Callback = OnPhase0BlockAdded(nil)
nilAltairCallback = OnAltairBlockAdded(nil)
nilBellatrixCallback = OnBellatrixBlockAdded(nil)
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
proc pruneAtFinalization(dag: ChainDAGRef) =
if dag.needStateCachesAndForkChoicePruning():
dag.pruneStateCachesDAG()
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
type
AddHeadRes = Result[BlockRef, VerifierError]
AddBackRes = Result[void, VerifierError]
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
suite "Block pool processing" & preset():
setup:
let rng = HmacDrbgContext.new()
var
db = makeTestDB(SLOTS_PER_EPOCH)
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor, {})
taskpool = Taskpool.new()
verifier = BatchVerifier.init(rng, taskpool)
quarantine = Quarantine.init()
state = newClone(dag.headState)
cache = StateCache()
info = ForkedEpochInfo()
att0 = makeFullAttestations(state[], dag.tail.root, 0.Slot, cache)
b1 = addTestBlock(state[], cache, attestations = att0).phase0Data
b2 = addTestBlock(state[], cache).phase0Data
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
test "basic ops":
check:
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
dag.getBlockRef(default Eth2Digest).isNone()
let
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
b0 = dag.getForkedBlock(dag.tail.root)
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
bh = dag.getForkedBlock(dag.head.root)
bh2 = dag.getForkedBlock(dag.head.bid)
check:
b0.isSome()
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
bh.isSome()
bh2.isSome()
dag.getBlockRef(dag.finalizedHead.blck.root).get() ==
dag.finalizedHead.blck
dag.getBlockRef(dag.head.root).get() == dag.head
test "Simple block add&get" & preset():
let
b1Add = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
b1Get = dag.getForkedBlock(b1.root)
check:
b1Get.isSome()
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
b1Get.get().root == b1.root
b1Add[].root == b1Get.get().root
dag.heads.len == 1
dag.heads[0] == b1Add[]
let
b2Add = dag.addHeadBlock(verifier, b2, nilPhase0Callback)
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
b2Get = dag.getForkedBlock(b2.root)
sr = dag.findShufflingRef(b1Add[].bid, b1Add[].slot.epoch)
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
er = dag.findEpochRef(b1Add[].bid, b1Add[].slot.epoch)
validators = getStateField(dag.headState, validators).lenu64()
check:
b2Get.isSome()
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
b2Get.get().root == b2.root
b2Add[].root == b2Get.get().root
dag.heads.len == 1
dag.heads[0] == b2Add[]
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
dag.containsForkBlock(b2.root)
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.parent(b2Add[].bid).get() == b1Add[].bid
# head not updated yet - getBlockIdAtSlot won't give those blocks
dag.getBlockIdAtSlot(b2Add[].slot).get() ==
BlockSlotId.init(dag.getBlockIdAtSlot(GENESIS_SLOT).get().bid, b2Add[].slot)
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
sr.isSome()
er.isSome()
# er reuses shuffling ref instance
er[].shufflingRef == sr[]
# Same epoch - same epochRef
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
er[] == dag.findEpochRef(b2Add[].bid, b2Add[].slot.epoch)[]
# Different epoch that was never processed
dag.findEpochRef(b1Add[].bid, b1Add[].slot.epoch + 1).isNone()
# ... but we know the shuffling already!
dag.findShufflingRef(b1Add[].bid, b1Add[].slot.epoch + 1).isSome()
dag.validatorKey(0'u64).isSome()
dag.validatorKey(validators - 1).isSome()
dag.validatorKey(validators).isNone()
# Skip one slot to get a gap
2020-05-19 15:46:29 +00:00
check:
process_slots(
Implement split preset/config support (#2710) * Implement split preset/config support This is the initial bulk refactor to introduce runtime config values in a number of places, somewhat replacing the existing mechanism of loading network metadata. It still needs more work, this is the initial refactor that introduces runtime configuration in some of the places that need it. The PR changes the way presets and constants work, to match the spec. In particular, a "preset" now refers to the compile-time configuration while a "cfg" or "RuntimeConfig" is the dynamic part. A single binary can support either mainnet or minimal, but not both. Support for other presets has been removed completely (can be readded, in case there's need). There's a number of outstanding tasks: * `SECONDS_PER_SLOT` still needs fixing * loading custom runtime configs needs redoing * checking constants against YAML file * yeerongpilly support `build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG` * load fork epoch from config * fix fork digest sent in status * nicer error string for request failures * fix tools * one more * fixup * fixup * fixup * use "standard" network definition folder in local testnet Files are loaded from their standard locations, including genesis etc, to conform to the format used in the `eth2-networks` repo. * fix launch scripts, allow unknown config values * fix base config of rest test * cleanups * bundle mainnet config using common loader * fix spec links and names * only include supported preset in binary * drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
defaultRuntimeConfig, state[], getStateField(state[], slot) + 1, cache,
info, {}).isOk()
let
b4 = addTestBlock(state[], cache).phase0Data
b4Add = dag.addHeadBlock(verifier, b4, nilPhase0Callback)
check:
b4Add[].parent == b2Add[]
2023-03-02 16:13:35 +00:00
dag.updateHead(b4Add[], quarantine, [])
dag.pruneAtFinalization()
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
check: # getBlockIdAtSlot operates on the head chain!
dag.getBlockIdAtSlot(b2Add[].slot).get() ==
BlockSlotId.init(b2Add[].bid, b2Add[].slot)
dag.parentOrSlot(dag.getBlockIdAtSlot(b2Add[].slot).get()).get() ==
BlockSlotId.init(b1Add[].bid, b2Add[].slot)
dag.parentOrSlot(dag.getBlockIdAtSlot(b2Add[].slot + 1).get()).get() ==
BlockSlotId.init(b2Add[].bid, b2Add[].slot)
var blocks: array[3, BlockId]
check:
dag.getBlockRange(Slot(0), 1, blocks.toOpenArray(0, 0)) == 0
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
blocks[0..<1] == [dag.tail]
dag.getBlockRange(Slot(0), 1, blocks.toOpenArray(0, 1)) == 0
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
blocks[0..<2] == [dag.tail, b1Add[].bid]
dag.getBlockRange(Slot(0), 2, blocks.toOpenArray(0, 1)) == 0
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
blocks[0..<2] == [dag.tail, b2Add[].bid]
dag.getBlockRange(Slot(0), 3, blocks.toOpenArray(0, 1)) == 1
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
blocks[1..<2] == [dag.tail] # block 3 is missing!
dag.getBlockRange(Slot(2), 2, blocks.toOpenArray(0, 1)) == 0
blocks[0..<2] == [b2Add[].bid, b4Add[].bid] # block 3 is missing!
2020-10-14 20:23:04 +00:00
# large skip step
dag.getBlockRange(Slot(0), uint64.high, blocks.toOpenArray(0, 2)) == 2
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
blocks[2..2] == [dag.tail]
2020-10-14 20:23:04 +00:00
# large skip step
dag.getBlockRange(Slot(2), uint64.high, blocks.toOpenArray(0, 1)) == 1
blocks[1..1] == [b2Add[].bid]
2020-10-14 20:23:04 +00:00
# empty length
dag.getBlockRange(Slot(2), 2, blocks.toOpenArray(0, -1)) == 0
# No blocks in sight
dag.getBlockRange(Slot(5), 1, blocks.toOpenArray(0, 1)) == 2
2020-10-14 20:23:04 +00:00
# No blocks in sight
dag.getBlockRange(Slot(uint64.high), 1, blocks.toOpenArray(0, 1)) == 2
# No blocks in sight either due to gaps
dag.getBlockRange(Slot(3), 2, blocks.toOpenArray(0, 1)) == 2
blocks[2..<2].len == 0
# A fork forces the clearance state to a point where it cannot be advanced
let
nextEpoch = dag.head.slot.epoch + 1
nextEpochSlot = nextEpoch.start_slot()
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
parentBsi = dag.head.parent.atSlot(nextEpochSlot).toBlockSlotId().get()
stateCheckpoint = dag.stateCheckpoint(parentBsi)
shufflingRef = dag.getShufflingRef(dag.head, nextEpoch, false).valueOr:
raiseAssert "false"
nextEpochProposers = withState(dag.headState):
get_beacon_proposer_indices(
forkyState.data, shufflingRef.shuffled_active_validator_indices,
nextEpoch)
check:
# get_beacon_proposer_indices based on ShufflingRef matches EpochRef
nextEpochProposers == dag.getEpochRef(
dag.head, nextEpoch, true).get.beacon_proposers
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
parentBsi.bid == dag.head.parent.bid
parentBsi.slot == nextEpochSlot
# Pre-heated caches
dag.findShufflingRef(dag.head.parent.bid, dag.head.slot.epoch).isOk()
dag.findShufflingRef(dag.head.parent.bid, nextEpoch).isOk()
dag.getEpochRef(dag.head.parent, nextEpoch, true).isOk()
# Getting an EpochRef should not result in states being stored
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
db.getStateRoot(stateCheckpoint.bid.root, stateCheckpoint.slot).isErr()
# this is required for the test to work - it's not a "public"
# post-condition of getEpochRef
getStateField(dag.epochRefState, slot) == nextEpochSlot
assign(state[], dag.epochRefState)
let
bnext = addTestBlock(state[], cache).phase0Data
bnextAdd = dag.addHeadBlock(verifier, bnext, nilPhase0Callback)
check:
# Getting an EpochRef should not result in states being stored
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
db.getStateRoot(stateCheckpoint.bid.root, stateCheckpoint.slot).isOk()
test "Adding the same block twice returns a Duplicate error" & preset():
let
b10 = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
b11 = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
check:
b11 == AddHeadRes.err VerifierError.Duplicate
not b10[].isNil
test "updateHead updates head and headState" & preset():
let
b1Add = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
2023-03-02 16:13:35 +00:00
dag.updateHead(b1Add[], quarantine, [])
dag.pruneAtFinalization()
check:
dag.head == b1Add[]
getStateField(dag.headState, slot) == b1Add[].slot
test "updateState sanity" & preset():
let
b1Add = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
b2Add = dag.addHeadBlock(verifier, b2, nilPhase0Callback)
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
bs1 = BlockSlotId.init(b1Add[].bid, b1.message.slot)
bs1_3 = BlockSlotId.init(b1Add[].bid, 3.Slot)
bs2_3 = BlockSlotId.init(b2Add[].bid, 3.Slot)
let tmpState = assignClone(dag.headState)
# move to specific block
var cache = StateCache()
check:
dag.updateState(tmpState[], bs1, false, cache)
tmpState[].latest_block_root == b1Add[].root
getStateField(tmpState[], slot) == bs1.slot
# Skip slots
check:
dag.updateState(tmpState[], bs1_3, false, cache) # skip slots
tmpState[].latest_block_root == b1Add[].root
getStateField(tmpState[], slot) == bs1_3.slot
# Move back slots, but not blocks
check:
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.updateState(
tmpState[], dag.parent(bs1_3.bid).expect("block").atSlot(), false, cache)
tmpState[].latest_block_root == b1Add[].parent.root
getStateField(tmpState[], slot) == b1Add[].parent.slot
# Move to different block and slot
check:
dag.updateState(tmpState[], bs2_3, false, cache)
tmpState[].latest_block_root == b2Add[].root
getStateField(tmpState[], slot) == bs2_3.slot
# Move back slot and block
check:
dag.updateState(tmpState[], bs1, false, cache)
tmpState[].latest_block_root == b1Add[].root
getStateField(tmpState[], slot) == bs1.slot
# Move back to genesis
check:
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.updateState(
tmpState[], dag.parent(bs1.bid).expect("block").atSlot(), false, cache)
tmpState[].latest_block_root == b1Add[].parent.root
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
getStateField(tmpState[], slot) == b1Add[].parent.slot
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
suite "Block pool altair processing" & preset():
setup:
let rng = HmacDrbgContext.new()
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
var
cfg = defaultRuntimeConfig
cfg.ALTAIR_FORK_EPOCH = Epoch(1)
var
db = makeTestDB(SLOTS_PER_EPOCH)
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, cfg, db, validatorMonitor, {})
taskpool = Taskpool.new()
verifier = BatchVerifier.init(rng, taskpool)
quarantine = Quarantine.init()
state = newClone(dag.headState)
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
cache = StateCache()
info = ForkedEpochInfo()
# Advance to altair
check:
process_slots(
cfg, state[], cfg.ALTAIR_FORK_EPOCH.start_slot(), cache,
info, {}).isOk()
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
state[].kind == ConsensusFork.Altair
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
var
b1 = addTestBlock(state[], cache).altairData
att1 = makeFullAttestations(state[], b1.root, b1.message.slot, cache)
b2 = addTestBlock(state[], cache, attestations = att1).altairData
test "Invalid signatures" & preset():
let badSignature = get_slot_signature(
Fork(), ZERO_HASH, 42.Slot,
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
MockPrivKeys[ValidatorIndex(0)]).toValidatorSig()
check:
dag.addHeadBlock(verifier, b1, nilAltairCallback).isOk()
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
block: # Main signature
var b = b2
b.signature = badSignature
let
bAdd = dag.addHeadBlock(verifier, b, nilAltairCallback)
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
check:
bAdd == AddHeadRes.err VerifierError.Invalid
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
block: # Randao reveal
var b = b2
b.message.body.randao_reveal = badSignature
let
bAdd = dag.addHeadBlock(verifier, b, nilAltairCallback)
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
check:
bAdd == AddHeadRes.err VerifierError.Invalid
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
block: # Attestations
var b = b2
b.message.body.attestations[0].signature = badSignature
let
bAdd = dag.addHeadBlock(verifier, b, nilAltairCallback)
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
check:
bAdd == AddHeadRes.err VerifierError.Invalid
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
block: # SyncAggregate empty
var b = b2
b.message.body.sync_aggregate.sync_committee_signature = badSignature
let
bAdd = dag.addHeadBlock(verifier, b, nilAltairCallback)
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
check:
bAdd == AddHeadRes.err VerifierError.Invalid
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
block: # SyncAggregate junk
var b = b2
b.message.body.sync_aggregate.sync_committee_signature = badSignature
b.message.body.sync_aggregate.sync_committee_bits[0] = true
let
bAdd = dag.addHeadBlock(verifier, b, nilAltairCallback)
Speed up altair block processing 2x (#3115) * Speed up altair block processing >2x Like #3089, this PR drastially speeds up historical REST queries and other long state replays. * cache sync committee validator indices * use ~80mb less memory for validator pubkey mappings * batch-verify sync aggregate signature (fixes #2985) * document sync committee hack with head block vs sync message block * add batch signature verification failure tests Before: ``` ../env.sh nim c -d:release -r ncli_db --db:mainnet_0/db bench --start-slot:-1000 All time are ms Average, StdDev, Min, Max, Samples, Test Validation is turned off meaning that no BLS operations are performed 5830.675, 0.000, 5830.675, 5830.675, 1, Initialize DB 0.481, 1.878, 0.215, 59.167, 981, Load block from database 8422.566, 0.000, 8422.566, 8422.566, 1, Load state from database 6.996, 1.678, 0.042, 14.385, 969, Advance slot, non-epoch 93.217, 8.318, 84.192, 122.209, 32, Advance slot, epoch 20.513, 23.665, 11.510, 201.561, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` After: ``` 7081.422, 0.000, 7081.422, 7081.422, 1, Initialize DB 0.553, 2.122, 0.175, 66.692, 981, Load block from database 5439.446, 0.000, 5439.446, 5439.446, 1, Load state from database 6.829, 1.575, 0.043, 12.156, 969, Advance slot, non-epoch 94.716, 2.749, 88.395, 100.026, 32, Advance slot, epoch 11.636, 23.766, 4.889, 205.250, 981, Apply block, no slot processing 0.000, 0.000, 0.000, 0.000, 0, Database load 0.000, 0.000, 0.000, 0.000, 0, Database store ``` * add comment
2021-11-24 12:43:50 +00:00
check:
bAdd == AddHeadRes.err VerifierError.Invalid
suite "chain DAG finalization tests" & preset():
setup:
let rng = HmacDrbgContext.new()
var
db = makeTestDB(SLOTS_PER_EPOCH)
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor, {})
taskpool = Taskpool.new()
verifier = BatchVerifier.init(rng, taskpool)
quarantine = Quarantine.init()
cache = StateCache()
info = ForkedEpochInfo()
test "prune heads on finalization" & preset():
# Create a fork that will not be taken
var
blck = makeTestBlock(dag.headState, cache).phase0Data
tmpState = assignClone(dag.headState)
check:
process_slots(
Implement split preset/config support (#2710) * Implement split preset/config support This is the initial bulk refactor to introduce runtime config values in a number of places, somewhat replacing the existing mechanism of loading network metadata. It still needs more work, this is the initial refactor that introduces runtime configuration in some of the places that need it. The PR changes the way presets and constants work, to match the spec. In particular, a "preset" now refers to the compile-time configuration while a "cfg" or "RuntimeConfig" is the dynamic part. A single binary can support either mainnet or minimal, but not both. Support for other presets has been removed completely (can be readded, in case there's need). There's a number of outstanding tasks: * `SECONDS_PER_SLOT` still needs fixing * loading custom runtime configs needs redoing * checking constants against YAML file * yeerongpilly support `build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG` * load fork epoch from config * fix fork digest sent in status * nicer error string for request failures * fix tools * one more * fixup * fixup * fixup * use "standard" network definition folder in local testnet Files are loaded from their standard locations, including genesis etc, to conform to the format used in the `eth2-networks` repo. * fix launch scripts, allow unknown config values * fix base config of rest test * cleanups * bundle mainnet config using common loader * fix spec links and names * only include supported preset in binary * drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
defaultRuntimeConfig, tmpState[],
getStateField(tmpState[], slot) + (5 * SLOTS_PER_EPOCH).uint64,
cache, info, {}).isOk()
let lateBlock = addTestBlock(tmpState[], cache).phase0Data
block:
let status = dag.addHeadBlock(verifier, blck, nilPhase0Callback)
check: status.isOk()
assign(tmpState[], dag.headState)
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
# skip slots so we can test gappy getBlockIdAtSlot
chaindag: don't keep backfill block table in memory (#3429) This PR names and documents the concept of the archive: a range of slots for which we have degraded functionality in terms of historical access - in particular: * we don't support rewinding to states in this range * we don't keep an in-memory representation of the block dag The archive de-facto exists in a trusted-node-synced node, but this PR gives it a name and drops the in-memory digest index. In order to satisfy `GetBlocksByRange` requests, we ensure that we have blocks for the entire archive period via backfill. Future versions may relax this further, adding a "pre-archive" period that is fully pruned. During by-slot searches in the archive (both for libp2p and rest requests), an extra database lookup is used to covert the given `slot` to a `root` - future versions will avoid this using era files which natively are indexed by `slot`. That said, the lookup is quite fast compared to the actual block loading given how trivial the table is - it's hard to measure, even. A collateral benefit of this PR is that checkpoint-synced nodes will see 100-200MB memory usage savings, thanks to the dropped in-memory cache - future pruning work will bring this benefit to full nodes as well. * document chaindag storage architecture and assumptions * look up parent using block id instead of full block in clearance (future-proofing the code against a future in which blocks come from era files) * simplify finalized block init, always writing the backfill portion to db at startup (to ensure lookups work as expected) * preallocate some extra memory for finalized blocks, to avoid immediate realloc
2022-02-26 18:16:19 +00:00
check process_slots(
defaultRuntimeConfig, tmpState[],
getStateField(tmpState[], slot) + 2.uint64,
cache, info, {}).isOk()
for i in 0 ..< (SLOTS_PER_EPOCH * 6):
if i == 1:
# There are 2 heads now because of the fork at slot 1
check:
dag.heads.len == 2
blck = addTestBlock(
tmpState[], cache,
attestations = makeFullAttestations(
tmpState[], dag.head.root, getStateField(tmpState[], slot), cache, {})).phase0Data
let added = dag.addHeadBlock(verifier, blck, nilPhase0Callback)
check: added.isOk()
2023-03-02 16:13:35 +00:00
dag.updateHead(added[], quarantine, [])
dag.pruneAtFinalization()
check:
dag.heads.len() == 1
dag.getBlockIdAtSlot(0.Slot).get().bid.slot == 0.Slot
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockIdAtSlot(2.Slot).get() ==
BlockSlotId.init(dag.getBlockIdAtSlot(1.Slot).get().bid, 2.Slot)
chaindag: don't keep backfill block table in memory (#3429) This PR names and documents the concept of the archive: a range of slots for which we have degraded functionality in terms of historical access - in particular: * we don't support rewinding to states in this range * we don't keep an in-memory representation of the block dag The archive de-facto exists in a trusted-node-synced node, but this PR gives it a name and drops the in-memory digest index. In order to satisfy `GetBlocksByRange` requests, we ensure that we have blocks for the entire archive period via backfill. Future versions may relax this further, adding a "pre-archive" period that is fully pruned. During by-slot searches in the archive (both for libp2p and rest requests), an extra database lookup is used to covert the given `slot` to a `root` - future versions will avoid this using era files which natively are indexed by `slot`. That said, the lookup is quite fast compared to the actual block loading given how trivial the table is - it's hard to measure, even. A collateral benefit of this PR is that checkpoint-synced nodes will see 100-200MB memory usage savings, thanks to the dropped in-memory cache - future pruning work will bring this benefit to full nodes as well. * document chaindag storage architecture and assumptions * look up parent using block id instead of full block in clearance (future-proofing the code against a future in which blocks come from era files) * simplify finalized block init, always writing the backfill portion to db at startup (to ensure lookups work as expected) * preallocate some extra memory for finalized blocks, to avoid immediate realloc
2022-02-26 18:16:19 +00:00
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockIdAtSlot(dag.head.slot).get() == BlockSlotId.init(
dag.head.bid, dag.head.slot)
dag.getBlockIdAtSlot(dag.head.slot + 1).get() == BlockSlotId.init(
dag.head.bid, dag.head.slot + 1)
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
not dag.containsForkBlock(dag.getBlockIdAtSlot(5.Slot).get().bid.root)
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
dag.containsForkBlock(dag.finalizedHead.blck.root)
dag.getBlockRef(dag.getBlockIdAtSlot(0.Slot).get().bid.root).isNone() # Finalized - no BlockRef
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockRef(dag.finalizedHead.blck.root).isSome()
isNil dag.finalizedHead.blck.parent
check:
dag.db.immutableValidators.len() == getStateField(dag.headState, validators).len()
block:
var cur = dag.head.bid
while true:
let parent = dag.parent(cur)
if cur.slot > 0:
check:
parent.isSome and parent.get().slot < cur.slot
cur = parent.get()
else:
check:
parent.isErr()
break
check: cur.slot == 0
block:
var cur = dag.head.bid.atSlot()
while true:
let parent = dag.parentOrSlot(cur)
if cur.slot > 0:
check:
parent.isSome and (parent.get().slot < cur.slot or parent.get().bid != cur.bid)
cur = parent.get()
else:
check:
parent.isErr()
break
check: cur.slot == 0
let
finalER = dag.getEpochRef(
dag.finalizedHead.blck, dag.finalizedHead.slot.epoch, false)
# The EpochRef for the finalized block is needed for eth1 voting, so we
# should never drop it!
check:
not finalER.isErr()
block:
for er in dag.epochRefs.entries:
check: er.value == nil or er.value.epoch >= dag.finalizedHead.slot.epoch
block:
let tmpStateData = assignClone(dag.headState)
# Check that cached data is available after updateState - since we
# just processed the head the relevant epochrefs should not have been
# evicted yet
cache = StateCache()
check: updateState(
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag, tmpStateData[],
dag.head.atSlot(dag.head.slot).toBlockSlotId().expect("not nil"),
false, cache)
check:
dag.head.slot.epoch in cache.shuffled_active_validator_indices
(dag.head.slot.epoch - 1) in cache.shuffled_active_validator_indices
dag.head.slot in cache.beacon_proposer_indices
block:
# The late block is a block whose parent was finalized long ago and thus
# is no longer a viable head candidate
let status = dag.addHeadBlock(verifier, lateBlock, nilPhase0Callback)
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
# This _should_ be Unviable, but we can't tell, from the data that we have
# so MissingParent is the least wrong thing to reply
check: status == AddHeadRes.err VerifierError.UnviableFork
block:
let
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
finalizedCheckpoint = dag.stateCheckpoint(dag.finalizedHead.toBlockSlotId().get())
headCheckpoint = dag.stateCheckpoint(dag.head.bid.atSlot())
prunedCheckpoint = dag.stateCheckpoint(dag.parent(dag.finalizedHead.blck.bid).get().atSlot())
check:
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
db.getStateRoot(headCheckpoint.bid.root, headCheckpoint.slot).isSome
db.getStateRoot(finalizedCheckpoint.bid.root, finalizedCheckpoint.slot).isSome
db.getStateRoot(prunedCheckpoint.bid.root, prunedCheckpoint.slot).isNone
# Roll back head block (e.g., because it was declared INVALID)
let parentRoot = dag.head.parent.root
2023-03-02 16:13:35 +00:00
dag.updateHead(dag.head.parent, quarantine, [])
check: dag.head.root == parentRoot
let
validatorMonitor2 = newClone(ValidatorMonitor.init())
dag2 = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor2, {})
# check that the state reloaded from database resembles what we had before
check:
dag2.tail.root == dag.tail.root
dag2.head.root == dag.head.root
dag2.head.root == parentRoot
dag2.finalizedHead.blck.root == dag.finalizedHead.blck.root
dag2.finalizedHead.slot == dag.finalizedHead.slot
getStateRoot(dag2.headState) == getStateRoot(dag.headState)
# No canonical block data should be pruned by the removal of the fork
for i in Slot(0)..dag2.head.slot:
let bids = dag.getBlockIdAtSlot(i).expect("found it")
if bids.isProposed:
check: dag2.getForkedBlock(bids.bid).isSome
# The unviable block should have been pruned however
check: dag2.getForkedBlock(lateBlock.root).isNone
test "orphaned epoch block" & preset():
let prestate = (ref ForkedHashedBeaconState)(kind: ConsensusFork.Phase0)
for i in 0 ..< SLOTS_PER_EPOCH:
if i == SLOTS_PER_EPOCH - 1:
assign(prestate[], dag.headState)
let blck = makeTestBlock(dag.headState, cache).phase0Data
let added = dag.addHeadBlock(verifier, blck, nilPhase0Callback)
check: added.isOk()
2023-03-02 16:13:35 +00:00
dag.updateHead(added[], quarantine, [])
dag.pruneAtFinalization()
check:
dag.heads.len() == 1
# The loop creates multiple branches, which StateCache isn't suitable for
cache = StateCache()
doAssert process_slots(
Implement split preset/config support (#2710) * Implement split preset/config support This is the initial bulk refactor to introduce runtime config values in a number of places, somewhat replacing the existing mechanism of loading network metadata. It still needs more work, this is the initial refactor that introduces runtime configuration in some of the places that need it. The PR changes the way presets and constants work, to match the spec. In particular, a "preset" now refers to the compile-time configuration while a "cfg" or "RuntimeConfig" is the dynamic part. A single binary can support either mainnet or minimal, but not both. Support for other presets has been removed completely (can be readded, in case there's need). There's a number of outstanding tasks: * `SECONDS_PER_SLOT` still needs fixing * loading custom runtime configs needs redoing * checking constants against YAML file * yeerongpilly support `build/nimbus_beacon_node --network=yeerongpilly --discv5:no --log-level=DEBUG` * load fork epoch from config * fix fork digest sent in status * nicer error string for request failures * fix tools * one more * fixup * fixup * fixup * use "standard" network definition folder in local testnet Files are loaded from their standard locations, including genesis etc, to conform to the format used in the `eth2-networks` repo. * fix launch scripts, allow unknown config values * fix base config of rest test * cleanups * bundle mainnet config using common loader * fix spec links and names * only include supported preset in binary * drop yeerongpilly, add altair-devnet-0, support boot_enr.yaml
2021-07-12 13:01:38 +00:00
defaultRuntimeConfig, prestate[], getStateField(prestate[], slot) + 1,
cache, info, {}).isOk()
# create another block, orphaning the head
let blck = makeTestBlock(prestate[], cache).phase0Data
# Add block, but don't update head
let added = dag.addHeadBlock(verifier, blck, nilPhase0Callback)
check: added.isOk()
var
validatorMonitor2 = newClone(ValidatorMonitor.init())
dag2 = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor2, {})
# check that we can apply the block after the orphaning
let added2 = dag2.addHeadBlock(verifier, blck, nilPhase0Callback)
check: added2.isOk()
test "init with gaps" & preset():
for blck in makeTestBlocks(
dag.headState, cache, int(SLOTS_PER_EPOCH * 6 - 2), attested = true):
let added = dag.addHeadBlock(verifier, blck.phase0Data, nilPhase0Callback)
check: added.isOk()
2023-03-02 16:13:35 +00:00
dag.updateHead(added[], quarantine, [])
dag.pruneAtFinalization()
# Advance past epoch so that the epoch transition is gapped
check:
process_slots(
defaultRuntimeConfig, dag.headState, Slot(SLOTS_PER_EPOCH * 6 + 2),
cache, info, {}).isOk()
let blck = makeTestBlock(
dag.headState, cache,
attestations = makeFullAttestations(
dag.headState, dag.head.root, getStateField(dag.headState, slot),
cache, {})).phase0Data
let added = dag.addHeadBlock(verifier, blck, nilPhase0Callback)
check: added.isOk()
2023-03-02 16:13:35 +00:00
dag.updateHead(added[], quarantine, [])
dag.pruneAtFinalization()
block:
# Check that we can rewind to every block from head to finalized
var
cur = dag.head
tmpStateData = assignClone(dag.headState)
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
while cur != nil: # Go all the way to dag.finalizedHead
assign(tmpStateData[], dag.headState)
check:
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.updateState(tmpStateData[], cur.bid.atSlot(), false, cache)
dag.getForkedBlock(cur.bid).get().phase0Data.message.state_root ==
getStateRoot(tmpStateData[])
getStateRoot(tmpStateData[]) == hash_tree_root(
tmpStateData[].phase0Data.data)
cur = cur.parent
let
validatorMonitor2 = newClone(ValidatorMonitor.init())
dag2 = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor2, {})
# check that the state reloaded from database resembles what we had before
check:
dag2.tail.root == dag.tail.root
dag2.head.root == dag.head.root
dag2.finalizedHead.blck.root == dag.finalizedHead.blck.root
dag2.finalizedHead.slot == dag.finalizedHead.slot
getStateRoot(dag2.headState) == getStateRoot(dag.headState)
suite "Old database versions" & preset():
setup:
let
rng = HmacDrbgContext.new()
genState = newClone(initialize_hashed_beacon_state_from_eth1(
defaultRuntimeConfig, ZERO_HASH, 0,
makeInitialDeposits(SLOTS_PER_EPOCH.uint64, flags = {skipBlsValidation}),
{skipBlsValidation}))
genBlock = get_initial_beacon_block(genState[])
var
taskpool = Taskpool.new()
verifier = BatchVerifier.init(rng, taskpool)
quarantine = Quarantine.init()
test "pre-1.1.0":
# only kvstore, no immutable validator keys
let
sq = SqStoreRef.init("", "test", inMemory = true).expect(
"working database (out of memory?)")
v0 = BeaconChainDBV0.new(sq, readOnly = false)
db = BeaconChainDB.new(sq)
# preInit a database to a v1.0.12 state
v0.putStateV0(genState[].root, genState[].data)
v0.putBlockV0(genBlock)
db.putStateRoot(
genState[].latest_block_root, genState[].data.slot, genState[].root)
db.putTailBlock(genBlock.root)
db.putHeadBlock(genBlock.root)
db.putGenesisBlock(genBlock.root)
var
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, defaultRuntimeConfig, db,validatorMonitor, {})
state = newClone(dag.headState)
cache = StateCache()
att0 = makeFullAttestations(state[], dag.tail.root, 0.Slot, cache)
b1 = addTestBlock(state[], cache, attestations = att0).phase0Data
b1Add = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
check:
b1Add.isOk()
suite "Diverging hardforks":
setup:
let rng = HmacDrbgContext.new()
var
phase0RuntimeConfig = defaultRuntimeConfig
altairRuntimeConfig = defaultRuntimeConfig
phase0RuntimeConfig.ALTAIR_FORK_EPOCH = FAR_FUTURE_EPOCH
altairRuntimeConfig.ALTAIR_FORK_EPOCH = 2.Epoch
var
db = makeTestDB(SLOTS_PER_EPOCH)
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, phase0RuntimeConfig, db, validatorMonitor, {})
taskpool = Taskpool.new()
verifier = BatchVerifier.init(rng, taskpool)
quarantine = newClone(Quarantine.init())
cache = StateCache()
info = ForkedEpochInfo()
tmpState = assignClone(dag.headState)
test "Tail block only in common":
check:
process_slots(
phase0RuntimeConfig, tmpState[],
getStateField(tmpState[], slot) + (3 * SLOTS_PER_EPOCH).uint64,
cache, info, {}).isOk()
# Because the first block is after the Altair transition, the only block in
# common is the tail block
var
b1 = addTestBlock(tmpState[], cache).phase0Data
b1Add = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
check b1Add.isOk()
2023-03-02 16:13:35 +00:00
dag.updateHead(b1Add[], quarantine[], [])
let validatorMonitorAltair = newClone(ValidatorMonitor.init())
let dagAltair = init(
ChainDAGRef, altairRuntimeConfig, db, validatorMonitorAltair, {})
discard AttestationPool.init(dagAltair, quarantine)
test "Non-tail block in common":
check:
process_slots(
phase0RuntimeConfig, tmpState[],
getStateField(tmpState[], slot) + SLOTS_PER_EPOCH.uint64,
cache, info, {}).isOk()
# There's a block in the shared-correct phase0 hardfork, before epoch 2
var
b1 = addTestBlock(tmpState[], cache).phase0Data
b1Add = dag.addHeadBlock(verifier, b1, nilPhase0Callback)
check:
b1Add.isOk()
process_slots(
phase0RuntimeConfig, tmpState[],
getStateField(tmpState[], slot) + (3 * SLOTS_PER_EPOCH).uint64,
cache, info, {}).isOk()
var
b2 = addTestBlock(tmpState[], cache).phase0Data
b2Add = dag.addHeadBlock(verifier, b2, nilPhase0Callback)
check b2Add.isOk()
2023-03-02 16:13:35 +00:00
dag.updateHead(b2Add[], quarantine[], [])
let validatorMonitor = newClone(ValidatorMonitor.init())
let dagAltair = init(
ChainDAGRef, altairRuntimeConfig, db, validatorMonitor, {})
discard AttestationPool.init(dagAltair, quarantine)
suite "Backfill":
setup:
let
genState = (ref ForkedHashedBeaconState)(
kind: ConsensusFork.Phase0,
phase0Data: initialize_hashed_beacon_state_from_eth1(
defaultRuntimeConfig, ZERO_HASH, 0,
makeInitialDeposits(SLOTS_PER_EPOCH.uint64, flags = {skipBlsValidation}),
{skipBlsValidation}))
tailState = assignClone(genState[])
blocks = block:
var blocks: seq[ForkedSignedBeaconBlock]
var cache: StateCache
for i in 0..<SLOTS_PER_EPOCH * 2:
blocks.add addTestBlock(tailState[], cache)
blocks
let
db = BeaconChainDB.new("", inMemory = true)
test "backfill to genesis":
let
tailBlock = blocks[^1]
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
genBlock = get_initial_beacon_block(genState[])
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
ChainDAGRef.preInit(db, genState[])
ChainDAGRef.preInit(db, tailState[])
let
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor, {})
var cache = StateCache()
check:
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockRef(tailBlock.root).get().bid == dag.tail
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
dag.getBlockRef(blocks[^2].root).isNone()
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockId(tailBlock.root).get() == dag.tail
dag.getBlockId(blocks[^2].root).isNone()
dag.getBlockIdAtSlot(dag.tail.slot).get().bid == dag.tail
dag.getBlockIdAtSlot(dag.tail.slot - 1).isNone()
dag.getBlockIdAtSlot(Slot(0)).isSome() # genesis stored in db
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockIdAtSlot(Slot(1)).isNone()
# No EpochRef for pre-tail epochs
dag.getEpochRef(dag.tail, dag.tail.slot.epoch - 1, true).isErr()
# Should get EpochRef for the tail however
dag.getEpochRef(dag.tail, dag.tail.slot.epoch, true).isOk()
dag.getEpochRef(dag.tail, dag.tail.slot.epoch + 1, true).isOk()
# Should not get EpochRef for random block
dag.getEpochRef(
BlockId(root: blocks[^2].root, slot: dag.tail.slot), # root/slot mismatch
dag.tail.slot.epoch, true).isErr()
dag.getEpochRef(dag.tail, dag.tail.slot.epoch + 1, true).isOk()
dag.getFinalizedEpochRef() != nil
chaindag: don't keep backfill block table in memory (#3429) This PR names and documents the concept of the archive: a range of slots for which we have degraded functionality in terms of historical access - in particular: * we don't support rewinding to states in this range * we don't keep an in-memory representation of the block dag The archive de-facto exists in a trusted-node-synced node, but this PR gives it a name and drops the in-memory digest index. In order to satisfy `GetBlocksByRange` requests, we ensure that we have blocks for the entire archive period via backfill. Future versions may relax this further, adding a "pre-archive" period that is fully pruned. During by-slot searches in the archive (both for libp2p and rest requests), an extra database lookup is used to covert the given `slot` to a `root` - future versions will avoid this using era files which natively are indexed by `slot`. That said, the lookup is quite fast compared to the actual block loading given how trivial the table is - it's hard to measure, even. A collateral benefit of this PR is that checkpoint-synced nodes will see 100-200MB memory usage savings, thanks to the dropped in-memory cache - future pruning work will bring this benefit to full nodes as well. * document chaindag storage architecture and assumptions * look up parent using block id instead of full block in clearance (future-proofing the code against a future in which blocks come from era files) * simplify finalized block init, always writing the backfill portion to db at startup (to ensure lookups work as expected) * preallocate some extra memory for finalized blocks, to avoid immediate realloc
2022-02-26 18:16:19 +00:00
dag.backfill == tailBlock.phase0Data.message.toBeaconBlockSummary()
# Check that we can propose right from the checkpoint state
dag.getProposalState(dag.head, dag.head.slot + 1, cache).isOk()
var
badBlock = blocks[^2].phase0Data
badBlock.signature = blocks[^3].phase0Data.signature
check:
dag.addBackfillBlock(badBlock) == AddBackRes.err VerifierError.Invalid
check:
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
dag.addBackfillBlock(blocks[^3].phase0Data) ==
AddBackRes.err VerifierError.MissingParent
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
dag.addBackfillBlock(genBlock.phase0Data.asSigned()) ==
AddBackRes.err VerifierError.MissingParent
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
dag.addBackfillBlock(tailBlock.phase0Data).isOk()
check:
dag.addBackfillBlock(blocks[^2].phase0Data).isOk()
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockRef(tailBlock.root).get().bid == dag.tail
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
dag.getBlockRef(blocks[^2].root).isNone()
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockId(tailBlock.root).get() == dag.tail
dag.getBlockId(blocks[^2].root).get().root == blocks[^2].root
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag.getBlockIdAtSlot(dag.tail.slot).get().bid == dag.tail
dag.getBlockIdAtSlot(dag.tail.slot - 1).get() ==
blocks[^2].toBlockId().atSlot()
dag.getBlockIdAtSlot(dag.tail.slot - 2).isNone
chaindag: don't keep backfill block table in memory (#3429) This PR names and documents the concept of the archive: a range of slots for which we have degraded functionality in terms of historical access - in particular: * we don't support rewinding to states in this range * we don't keep an in-memory representation of the block dag The archive de-facto exists in a trusted-node-synced node, but this PR gives it a name and drops the in-memory digest index. In order to satisfy `GetBlocksByRange` requests, we ensure that we have blocks for the entire archive period via backfill. Future versions may relax this further, adding a "pre-archive" period that is fully pruned. During by-slot searches in the archive (both for libp2p and rest requests), an extra database lookup is used to covert the given `slot` to a `root` - future versions will avoid this using era files which natively are indexed by `slot`. That said, the lookup is quite fast compared to the actual block loading given how trivial the table is - it's hard to measure, even. A collateral benefit of this PR is that checkpoint-synced nodes will see 100-200MB memory usage savings, thanks to the dropped in-memory cache - future pruning work will bring this benefit to full nodes as well. * document chaindag storage architecture and assumptions * look up parent using block id instead of full block in clearance (future-proofing the code against a future in which blocks come from era files) * simplify finalized block init, always writing the backfill portion to db at startup (to ensure lookups work as expected) * preallocate some extra memory for finalized blocks, to avoid immediate realloc
2022-02-26 18:16:19 +00:00
dag.backfill == blocks[^2].phase0Data.message.toBeaconBlockSummary()
check:
dag.addBackfillBlock(blocks[^3].phase0Data).isOk()
dag.getBlockIdAtSlot(dag.tail.slot - 2).get() ==
blocks[^3].toBlockId().atSlot()
dag.getBlockIdAtSlot(dag.tail.slot - 3).isNone
for i in 3..<blocks.len:
check: dag.addBackfillBlock(blocks[blocks.len - i - 1].phase0Data).isOk()
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
check:
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
dag.addBackfillBlock(genBlock.phase0Data.asSigned) ==
AddBackRes.err VerifierError.Duplicate
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
dag.backfill.slot == GENESIS_SLOT
dag.rebuildIndex()
check:
dag.getFinalizedEpochRef() != nil
test "reload backfill position":
let
tailBlock = blocks[^1]
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
ChainDAGRef.preInit(db, genState[])
ChainDAGRef.preInit(db, tailState[])
let
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor, {})
check:
dag.addBackfillBlock(blocks[^2].phase0Data).isOk()
chaindag: don't keep backfill block table in memory (#3429) This PR names and documents the concept of the archive: a range of slots for which we have degraded functionality in terms of historical access - in particular: * we don't support rewinding to states in this range * we don't keep an in-memory representation of the block dag The archive de-facto exists in a trusted-node-synced node, but this PR gives it a name and drops the in-memory digest index. In order to satisfy `GetBlocksByRange` requests, we ensure that we have blocks for the entire archive period via backfill. Future versions may relax this further, adding a "pre-archive" period that is fully pruned. During by-slot searches in the archive (both for libp2p and rest requests), an extra database lookup is used to covert the given `slot` to a `root` - future versions will avoid this using era files which natively are indexed by `slot`. That said, the lookup is quite fast compared to the actual block loading given how trivial the table is - it's hard to measure, even. A collateral benefit of this PR is that checkpoint-synced nodes will see 100-200MB memory usage savings, thanks to the dropped in-memory cache - future pruning work will bring this benefit to full nodes as well. * document chaindag storage architecture and assumptions * look up parent using block id instead of full block in clearance (future-proofing the code against a future in which blocks come from era files) * simplify finalized block init, always writing the backfill portion to db at startup (to ensure lookups work as expected) * preallocate some extra memory for finalized blocks, to avoid immediate realloc
2022-02-26 18:16:19 +00:00
dag.backfill == blocks[^2].phase0Data.message.toBeaconBlockSummary()
let
validatorMonitor2 = newClone(ValidatorMonitor.init())
dag2 = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor2, {})
check:
dag2.getFinalizedEpochRef() != nil
limit by-root requests to non-finalized blocks (#3293) * limit by-root requests to non-finalized blocks Presently, we keep a mapping from block root to `BlockRef` in memory - this has simplified reasoning about the dag, but is not sustainable with the chain growing. We can distinguish between two cases where by-root access is useful: * unfinalized blocks - this is where the beacon chain is operating generally, by validating incoming data as interesting for future fork choice decisions - bounded by the length of the unfinalized period * finalized blocks - historical access in the REST API etc - no bounds, really In this PR, we limit the by-root block index to the first use case: finalized chain data can more efficiently be addressed by slot number. Future work includes: * limiting the `BlockRef` horizon in general - each instance is 40 bytes+overhead which adds up - this needs further refactoring to deal with the tail vs state problem * persisting the finalized slot-to-hash index - this one also keeps growing unbounded (albeit slowly) Anyway, this PR easily shaves ~128mb of memory usage at the time of writing. * No longer honor `BeaconBlocksByRoot` requests outside of the non-finalized period - previously, Nimbus would generously return any block through this libp2p request - per the spec, finalized blocks should be fetched via `BeaconBlocksByRange` instead. * return `Opt[BlockRef]` instead of `nil` when blocks can't be found - this becomes a lot more common now and thus deserves more attention * `dag.blocks` -> `dag.forkBlocks` - this index only carries unfinalized blocks from now - `finalizedBlocks` covers the other `BlockRef` instances * in backfill, verify that the last backfilled block leads back to genesis, or panic * add backfill timings to log * fix missing check that `BlockRef` block can be fetched with `getForkedBlock` reliably * shortcut doppelganger check when feature is not enabled * in REST/JSON-RPC, fetch blocks without involving `BlockRef` * fix dag.blocks ref
2022-01-21 11:33:16 +00:00
dag2.getBlockRef(tailBlock.root).get().root == dag.tail.root
dag2.getBlockRef(blocks[^2].root).isNone()
Prune `BlockRef` on finalization (#3513) Up til now, the block dag has been using `BlockRef`, a structure adapted for a full DAG, to represent all of chain history. This is a correct and simple design, but does not exploit the linearity of the chain once parts of it finalize. By pruning the in-memory `BlockRef` structure at finalization, we save, at the time of writing, a cool ~250mb (or 25%:ish) chunk of memory landing us at a steady state of ~750mb normal memory usage for a validating node. Above all though, we prevent memory usage from growing proportionally with the length of the chain, something that would not be sustainable over time - instead, the steady state memory usage is roughly determined by the validator set size which grows much more slowly. With these changes, the core should remain sustainable memory-wise post-merge all the way to withdrawals (when the validator set is expected to grow). In-memory indices are still used for the "hot" unfinalized portion of the chain - this ensure that consensus performance remains unchanged. What changes is that for historical access, we use a db-based linear slot index which is cache-and-disk-friendly, keeping the cost for accessing historical data at a similar level as before, achieving the savings at no percievable cost to functionality or performance. A nice collateral benefit is the almost-instant startup since we no longer load any large indicies at dag init. The cost of this functionality instead can be found in the complexity of having to deal with two ways of traversing the chain - by `BlockRef` and by slot. * use `BlockId` instead of `BlockRef` where finalized / historical data may be required * simplify clearance pre-advancement * remove dag.finalizedBlocks (~50:ish mb) * remove `getBlockAtSlot` - use `getBlockIdAtSlot` instead * `parent` and `atSlot` for `BlockId` now require a `ChainDAGRef` instance, unlike `BlockRef` traversal * prune `BlockRef` parents on finality (~200:ish mb) * speed up ChainDAG init by not loading finalized history index * mess up light client server error handling - this need revisiting :)
2022-03-17 17:42:56 +00:00
dag2.getBlockIdAtSlot(dag.tail.slot).get().bid.root == dag.tail.root
dag2.getBlockIdAtSlot(dag.tail.slot - 1).get() ==
blocks[^2].toBlockId().atSlot()
dag2.getBlockIdAtSlot(dag.tail.slot - 2).isNone
chaindag: don't keep backfill block table in memory (#3429) This PR names and documents the concept of the archive: a range of slots for which we have degraded functionality in terms of historical access - in particular: * we don't support rewinding to states in this range * we don't keep an in-memory representation of the block dag The archive de-facto exists in a trusted-node-synced node, but this PR gives it a name and drops the in-memory digest index. In order to satisfy `GetBlocksByRange` requests, we ensure that we have blocks for the entire archive period via backfill. Future versions may relax this further, adding a "pre-archive" period that is fully pruned. During by-slot searches in the archive (both for libp2p and rest requests), an extra database lookup is used to covert the given `slot` to a `root` - future versions will avoid this using era files which natively are indexed by `slot`. That said, the lookup is quite fast compared to the actual block loading given how trivial the table is - it's hard to measure, even. A collateral benefit of this PR is that checkpoint-synced nodes will see 100-200MB memory usage savings, thanks to the dropped in-memory cache - future pruning work will bring this benefit to full nodes as well. * document chaindag storage architecture and assumptions * look up parent using block id instead of full block in clearance (future-proofing the code against a future in which blocks come from era files) * simplify finalized block init, always writing the backfill portion to db at startup (to ensure lookups work as expected) * preallocate some extra memory for finalized blocks, to avoid immediate realloc
2022-02-26 18:16:19 +00:00
dag2.backfill == blocks[^2].phase0Data.message.toBeaconBlockSummary()
test "Init without genesis / block":
let
tailBlock = blocks[^1]
genBlock = get_initial_beacon_block(genState[])
ChainDAGRef.preInit(db, tailState[])
let
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor, {})
check:
dag.getFinalizedEpochRef() != nil
for i in 0..<blocks.len:
check: dag.addBackfillBlock(
blocks[blocks.len - i - 1].phase0Data).isOk()
check:
dag.addBackfillBlock(genBlock.phase0Data.asSigned).isOk()
dag.addBackfillBlock(
genBlock.phase0Data.asSigned) == AddBackRes.err VerifierError.Duplicate
let
rng = HmacDrbgContext.new()
taskpool = Taskpool.new()
var
cache: StateCache
verifier = BatchVerifier.init(rng, taskpool)
quarantine = newClone(Quarantine.init())
let
next = addTestBlock(tailState[], cache).phase0Data
nextAdd = dag.addHeadBlock(verifier, next, nilPhase0Callback).get()
2023-03-02 16:13:35 +00:00
dag.updateHead(nextAdd, quarantine[], [])
let
validatorMonitor2 = newClone(ValidatorMonitor.init())
dag2 = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor2, {})
check:
dag2.head.root == next.root
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
suite "Starting states":
setup:
let
genState = (ref ForkedHashedBeaconState)(
kind: ConsensusFork.Phase0,
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
phase0Data: initialize_hashed_beacon_state_from_eth1(
defaultRuntimeConfig, ZERO_HASH, 0,
makeInitialDeposits(SLOTS_PER_EPOCH.uint64, flags = {skipBlsValidation}),
{skipBlsValidation}))
tailState = assignClone(genState[])
db = BeaconChainDB.new("", inMemory = true)
quarantine = newClone(Quarantine.init())
test "Starting state without block":
var
cache: StateCache
info: ForkedEpochInfo
let
genBlock = get_initial_beacon_block(genState[])
blocks = block:
var blocks: seq[ForkedSignedBeaconBlock]
while getStateField(tailState[], slot).uint64 + 1 < SLOTS_PER_EPOCH:
blocks.add addTestBlock(tailState[], cache)
blocks
tailBlock = blocks[^1]
check process_slots(
defaultRuntimeConfig, tailState[], Slot(SLOTS_PER_EPOCH), cache, info,
{}).isOk()
ChainDAGRef.preInit(db, tailState[])
let
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, defaultRuntimeConfig, db, validatorMonitor, {})
# check that we can update head to itself
2023-03-02 16:13:35 +00:00
dag.updateHead(dag.head, quarantine[], [])
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
check:
dag.finalizedHead.toBlockSlotId()[] == BlockSlotId(
bid: dag.tail, slot: (dag.tail.slot.epoch+1).start_slot)
dag.getBlockRef(tailBlock.root).get().bid == dag.tail
dag.getBlockRef(blocks[^2].root).isNone()
dag.getBlockId(tailBlock.root).get() == dag.tail
dag.getBlockId(blocks[^2].root).isNone()
dag.getBlockIdAtSlot(Slot(0)).isNone() # no genesis stored in db
dag.getBlockIdAtSlot(Slot(1)).isNone()
# Should get EpochRef for the tail however
# dag.getEpochRef(dag.tail, dag.tail.slot.epoch, true).isOk()
dag.getEpochRef(dag.tail, dag.tail.slot.epoch + 1, true).isOk()
# Should not get EpochRef for random block
dag.getEpochRef(
BlockId(root: blocks[^2].root, slot: dag.tail.slot), # root/slot mismatch
dag.tail.slot.epoch, true).isErr()
dag.getEpochRef(dag.tail, dag.tail.slot.epoch + 1, true).isOk()
dag.getFinalizedEpochRef() != nil
dag.backfill == tailBlock.phase0Data.message.toBeaconBlockSummary()
# Check that we can propose right from the checkpoint state
dag.getProposalState(dag.head, dag.head.slot + 1, cache).isOk()
var
badBlock = blocks[^2].phase0Data
badBlock.signature = blocks[^3].phase0Data.signature
check:
dag.addBackfillBlock(badBlock) == AddBackRes.err VerifierError.Invalid
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
check:
dag.addBackfillBlock(blocks[^3].phase0Data) ==
AddBackRes.err VerifierError.MissingParent
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
dag.addBackfillBlock(genBlock.phase0Data.asSigned()) ==
AddBackRes.err VerifierError.MissingParent
State-only checkpoint state startup (#4251) Currently, we require genesis and a checkpoint block and state to start from an arbitrary slot - this PR relaxes this requirement so that we can start with a state alone. The current trusted-node-sync algorithm works by first downloading blocks until we find an epoch aligned non-empty slot, then downloads the state via slot. However, current [proposals](https://github.com/ethereum/beacon-APIs/pull/226) for checkpointing prefer finalized state as the main reference - this allows more simple access control and caching on the server side - in particular, this should help checkpoint-syncing from sources that have a fast `finalized` state download (like infura and teku) but are slow when accessing state via slot. Earlier versions of Nimbus will not be able to read databases created without a checkpoint block and genesis. In most cases, backfilling makes the database compatible except where genesis is also missing (custom networks). * backfill checkpoint block from libp2p instead of checkpoint source, when doing trusted node sync * allow starting the client without genesis / checkpoint block * perform epoch start slot lookahead when loading tail state, so as to deal with the case where the epoch start slot does not have a block * replace `--blockId` with `--state-id` in TNS command line * when replaying, also look at the parent of the last-known-block (even if we don't have the parent block data, we can still replay from a "parent" state) - in particular, this clears the way for implementing state pruning * deprecate `--finalized-checkpoint-block` option (no longer needed)
2022-11-02 10:02:38 +00:00
dag.addBackfillBlock(tailBlock.phase0Data) == AddBackRes.ok()
check:
dag.addBackfillBlock(blocks[^2].phase0Data).isOk()
dag.getBlockRef(tailBlock.root).get().bid == dag.tail
dag.getBlockRef(blocks[^2].root).isNone()
dag.getBlockId(tailBlock.root).get() == dag.tail
dag.getBlockId(blocks[^2].root).get().root == blocks[^2].root
dag.getBlockIdAtSlot(dag.tail.slot).get().bid == dag.tail
dag.backfill == blocks[^2].phase0Data.message.toBeaconBlockSummary()
check:
dag.addBackfillBlock(blocks[^3].phase0Data).isOk()
dag.getBlockIdAtSlot(dag.tail.slot - 2).get() ==
blocks[^3].toBlockId().atSlot()
dag.getBlockIdAtSlot(dag.tail.slot - 3).isNone
for i in 3..<blocks.len:
check: dag.addBackfillBlock(blocks[blocks.len - i - 1].phase0Data).isOk()
check:
dag.addBackfillBlock(genBlock.phase0Data.asSigned).isOk()
dag.backfill.slot == GENESIS_SLOT
check:
dag.getFinalizedEpochRef() != nil
suite "Latest valid hash" & preset():
setup:
let rng = HmacDrbgContext.new()
var runtimeConfig = defaultRuntimeConfig
runtimeConfig.ALTAIR_FORK_EPOCH = 1.Epoch
runtimeConfig.BELLATRIX_FORK_EPOCH = 2.Epoch
var
db = makeTestDB(SLOTS_PER_EPOCH)
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, runtimeConfig, db, validatorMonitor, {})
taskpool = Taskpool.new()
verifier = BatchVerifier.init(rng, taskpool)
quarantine = newClone(Quarantine.init())
cache = StateCache()
info = ForkedEpochInfo()
state = newClone(dag.headState)
test "LVH searching":
# Reach Bellatrix, where execution payloads exist
check process_slots(
runtimeConfig, state[],
getStateField(state[], slot) + (3 * SLOTS_PER_EPOCH).uint64,
cache, info, {}).isOk()
var
b1 = addTestBlock(state[], cache, cfg = runtimeConfig).bellatrixData
b1Add = dag.addHeadBlock(verifier, b1, nilBellatrixCallback)
b2 = addTestBlock(state[], cache, cfg = runtimeConfig).bellatrixData
b2Add = dag.addHeadBlock(verifier, b2, nilBellatrixCallback)
b3 = addTestBlock(state[], cache, cfg = runtimeConfig).bellatrixData
b3Add = dag.addHeadBlock(verifier, b3, nilBellatrixCallback)
2023-03-02 16:13:35 +00:00
dag.updateHead(b3Add[], quarantine[], [])
check: dag.head.root == b3.root
# Ensure that head can go backwards in case of head being marked invalid
2023-03-02 16:13:35 +00:00
dag.updateHead(b2Add[], quarantine[], [])
check: dag.head.root == b2.root
2023-03-02 16:13:35 +00:00
dag.updateHead(b1Add[], quarantine[], [])
check: dag.head.root == b1.root
const fallbackEarliestInvalid =
Eth2Digest.fromHex("0x0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef")
check:
# Represents where LVH is two behind the invalid-marked block (because
# first param is parent). It searches using LVH (i.e. execution hash),
# but returns CL block hash, because that's what fork choice and other
# Nimbus components mostly use as a coordinate system. Since b1 is set
# to be valid here by being the LVH, it means that b2 must be invalid.
dag.getEarliestInvalidBlockRoot(
b2Add[].root, b1.message.body.execution_payload.block_hash,
fallbackEarliestInvalid) == b2Add[].root
# This simulates calling it based on b3 (child of b2), where there's no
# gap in detecting the invalid blocks. Because the API, due to testcase
# design, does not assume the block being tested is in the DAG, there's
# a manually specified fallback (CL) block root to use, because it does
# not have access to this information otherwise, because the very first
# newest block in the chain it's examining is already valid.
dag.getEarliestInvalidBlockRoot(
b2Add[].root, b2.message.body.execution_payload.block_hash,
fallbackEarliestInvalid) == fallbackEarliestInvalid
suite "Pruning":
setup:
let
rng = HmacDrbgContext.new()
cfg = block:
var res = defaultRuntimeConfig
res.MIN_VALIDATOR_WITHDRAWABILITY_DELAY = 4
res.CHURN_LIMIT_QUOTIENT = 1
doAssert res.MIN_EPOCHS_FOR_BLOCK_REQUESTS == 4
res
db = makeTestDB(SLOTS_PER_EPOCH)
validatorMonitor = newClone(ValidatorMonitor.init())
dag = init(ChainDAGRef, cfg, db, validatorMonitor, {})
tmpState = assignClone(dag.headState)
var
taskpool = Taskpool.new()
verifier = BatchVerifier.init(rng, taskpool)
quarantine = Quarantine.init()
cache = StateCache()
blocks = @[dag.head]
for i in 0 ..< (SLOTS_PER_EPOCH * (EPOCHS_PER_STATE_SNAPSHOT + cfg.MIN_EPOCHS_FOR_BLOCK_REQUESTS)):
let blck = addTestBlock(
tmpState[], cache,
attestations = makeFullAttestations(
tmpState[], dag.head.root, getStateField(tmpState[], slot), cache, {})).phase0Data
let added = dag.addHeadBlock(verifier, blck, nilPhase0Callback)
check: added.isOk()
blocks.add(added[])
2023-03-02 16:13:35 +00:00
dag.updateHead(added[], quarantine, [])
dag.pruneAtFinalization()
test "prune states":
dag.pruneHistory()
check:
dag.tail.slot == Epoch(EPOCHS_PER_STATE_SNAPSHOT).start_slot - 1
db.containsBlock(blocks[0].root)
db.containsBlock(blocks[1].root)
# Add a block
for i in 0..2:
let blck = addTestBlock(
tmpState[], cache,
attestations = makeFullAttestations(
tmpState[], dag.head.root, getStateField(tmpState[], slot), cache, {})).phase0Data
let added = dag.addHeadBlock(verifier, blck, nilPhase0Callback)
check: added.isOk()
2023-03-02 16:13:35 +00:00
dag.updateHead(added[], quarantine, [])
dag.pruneAtFinalization()
dag.pruneHistory()
check:
dag.tail.slot == Epoch(EPOCHS_PER_STATE_SNAPSHOT).start_slot - 1
not db.containsBlock(blocks[1].root)
suite "Ancestry":
test "ancestorSlot":
const numValidators = SLOTS_PER_EPOCH
let
cfg = defaultRuntimeConfig
validatorMonitor = newClone(ValidatorMonitor.init())
dag = ChainDAGRef.init(
cfg, makeTestDB(numValidators, cfg = cfg),
validatorMonitor, {})
quarantine = newClone(Quarantine.init())
rng = HmacDrbgContext.new()
taskpool = Taskpool.new()
type Node = tuple[blck: BlockRef, state: ref phase0.HashedBeaconState]
template bid(n: Node): BlockId = n.blck.bid
var verifier = BatchVerifier.init(rng, taskpool)
proc addBlock(parent: Node, slot: Slot): Node =
dag.updateHead(parent.blck, quarantine[], [])
var
cache: StateCache
info: ForkedEpochInfo
let res = process_slots(cfg, dag.headState, slot, cache, info, flags = {})
check res.isOk
let
blck = dag.headState.addTestBlock(cache, nextSlot = false, cfg = cfg)
added = dag.addHeadBlock(verifier, blck.phase0Data, nilPhase0Callback)
check added.isOk()
dag.updateHead(added[], quarantine[], [])
(blck: dag.head, state: newClone(dag.headState.phase0Data))
# s0
# / \
# s1 s3
# / \
# s2 s6
# / \ \
# s4 s5 s7
# \
# s8
# \
# s9
let
sg = (blck: dag.head, state: newClone(dag.headState.phase0Data))
s0 = sg.addBlock(Slot(10))
s1 = s0.addBlock(Slot(11))
s2 = s1.addBlock(Slot(12))
s3 = s0.addBlock(Slot(13))
s4 = s2.addBlock(Slot(14))
s5 = s2.addBlock(Slot(15))
s6 = s3.addBlock(Slot(16))
s7 = s6.addBlock(Slot(17))
s8 = s4.addBlock(Slot(18))
s9 = s8.addBlock(Slot(19))
check:
dag.ancestorSlot(s0.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s1.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s2.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s3.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s4.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s5.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s6.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s7.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s8.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s0.state[], s9.bid, Slot(10)) == Opt.some(s0.bid.slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s0.state[], b.bid, Slot(11)) == Opt.none(Slot)
check:
dag.ancestorSlot(s1.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s1.state[], s1.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s1.state[], s2.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s1.state[], s3.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s1.state[], s4.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s1.state[], s5.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s1.state[], s6.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s1.state[], s7.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s1.state[], s8.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s1.state[], s9.bid, Slot(10)) == Opt.some(s1.bid.slot)
for b in [s0, s3, s6, s7]:
check dag.ancestorSlot(s1.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s1.state[], b.bid, Slot(12)) == Opt.none(Slot)
check:
dag.ancestorSlot(s2.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s2.state[], s1.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s2.state[], s2.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s2.state[], s3.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s2.state[], s4.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s2.state[], s5.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s2.state[], s6.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s2.state[], s7.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s2.state[], s8.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s2.state[], s9.bid, Slot(10)) == Opt.some(s2.bid.slot)
for b in [s0, s3, s6, s7]:
check dag.ancestorSlot(s2.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s3, s6, s7]:
check dag.ancestorSlot(s2.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s2.state[], b.bid, Slot(13)) == Opt.none(Slot)
check:
dag.ancestorSlot(s3.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s3.state[], s1.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s3.state[], s2.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s3.state[], s3.bid, Slot(10)) == Opt.some(s3.bid.slot)
dag.ancestorSlot(s3.state[], s4.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s3.state[], s5.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s3.state[], s6.bid, Slot(10)) == Opt.some(s3.bid.slot)
dag.ancestorSlot(s3.state[], s7.bid, Slot(10)) == Opt.some(s3.bid.slot)
dag.ancestorSlot(s3.state[], s8.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s3.state[], s9.bid, Slot(10)) == Opt.some(s0.bid.slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s3.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s3.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s3.state[], b.bid, Slot(13)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s3.state[], b.bid, Slot(14)) == Opt.none(Slot)
check:
dag.ancestorSlot(s4.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s4.state[], s1.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s4.state[], s2.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s4.state[], s3.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s4.state[], s4.bid, Slot(10)) == Opt.some(s4.bid.slot)
dag.ancestorSlot(s4.state[], s5.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s4.state[], s6.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s4.state[], s7.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s4.state[], s8.bid, Slot(10)) == Opt.some(s4.bid.slot)
dag.ancestorSlot(s4.state[], s9.bid, Slot(10)) == Opt.some(s4.bid.slot)
for b in [s0, s3, s6, s7]:
check dag.ancestorSlot(s4.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s3, s6, s7]:
check dag.ancestorSlot(s4.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s5, s6, s7]:
check dag.ancestorSlot(s4.state[], b.bid, Slot(13)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s5, s6, s7]:
check dag.ancestorSlot(s4.state[], b.bid, Slot(14)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s4.state[], b.bid, Slot(15)) == Opt.none(Slot)
check:
dag.ancestorSlot(s5.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s5.state[], s1.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s5.state[], s2.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s5.state[], s3.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s5.state[], s4.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s5.state[], s5.bid, Slot(10)) == Opt.some(s5.bid.slot)
dag.ancestorSlot(s5.state[], s6.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s5.state[], s7.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s5.state[], s8.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s5.state[], s9.bid, Slot(10)) == Opt.some(s2.bid.slot)
for b in [s0, s3, s6, s7]:
check dag.ancestorSlot(s5.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s3, s6, s7]:
check dag.ancestorSlot(s5.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s6, s7, s8, s9]:
check dag.ancestorSlot(s5.state[], b.bid, Slot(13)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s6, s7, s8, s9]:
check dag.ancestorSlot(s5.state[], b.bid, Slot(14)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s6, s7, s8, s9]:
check dag.ancestorSlot(s5.state[], b.bid, Slot(15)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s5.state[], b.bid, Slot(16)) == Opt.none(Slot)
check:
dag.ancestorSlot(s6.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s6.state[], s1.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s6.state[], s2.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s6.state[], s3.bid, Slot(10)) == Opt.some(s3.bid.slot)
dag.ancestorSlot(s6.state[], s4.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s6.state[], s5.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s6.state[], s6.bid, Slot(10)) == Opt.some(s6.bid.slot)
dag.ancestorSlot(s6.state[], s7.bid, Slot(10)) == Opt.some(s6.bid.slot)
dag.ancestorSlot(s6.state[], s8.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s6.state[], s9.bid, Slot(10)) == Opt.some(s0.bid.slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s6.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s6.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s6.state[], b.bid, Slot(13)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s8, s9]:
check dag.ancestorSlot(s6.state[], b.bid, Slot(14)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s8, s9]:
check dag.ancestorSlot(s6.state[], b.bid, Slot(15)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s8, s9]:
check dag.ancestorSlot(s6.state[], b.bid, Slot(16)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s6.state[], b.bid, Slot(17)) == Opt.none(Slot)
check:
dag.ancestorSlot(s7.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s7.state[], s1.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s7.state[], s2.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s7.state[], s3.bid, Slot(10)) == Opt.some(s3.bid.slot)
dag.ancestorSlot(s7.state[], s4.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s7.state[], s5.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s7.state[], s6.bid, Slot(10)) == Opt.some(s6.bid.slot)
dag.ancestorSlot(s7.state[], s7.bid, Slot(10)) == Opt.some(s7.bid.slot)
dag.ancestorSlot(s7.state[], s8.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s7.state[], s9.bid, Slot(10)) == Opt.some(s0.bid.slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s4, s5, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(13)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(14)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(15)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(16)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(17)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s7.state[], b.bid, Slot(18)) == Opt.none(Slot)
check:
dag.ancestorSlot(s8.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s8.state[], s1.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s8.state[], s2.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s8.state[], s3.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s8.state[], s4.bid, Slot(10)) == Opt.some(s4.bid.slot)
dag.ancestorSlot(s8.state[], s5.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s8.state[], s6.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s8.state[], s7.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s8.state[], s8.bid, Slot(10)) == Opt.some(s8.bid.slot)
dag.ancestorSlot(s8.state[], s9.bid, Slot(10)) == Opt.some(s8.bid.slot)
for b in [s0, s3, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s3, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s5, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(13)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s5, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(14)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(15)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(16)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(17)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(18)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s8.state[], b.bid, Slot(19)) == Opt.none(Slot)
check:
dag.ancestorSlot(s9.state[], s0.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s9.state[], s1.bid, Slot(10)) == Opt.some(s1.bid.slot)
dag.ancestorSlot(s9.state[], s2.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s9.state[], s3.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s9.state[], s4.bid, Slot(10)) == Opt.some(s4.bid.slot)
dag.ancestorSlot(s9.state[], s5.bid, Slot(10)) == Opt.some(s2.bid.slot)
dag.ancestorSlot(s9.state[], s6.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s9.state[], s7.bid, Slot(10)) == Opt.some(s0.bid.slot)
dag.ancestorSlot(s9.state[], s8.bid, Slot(10)) == Opt.some(s8.bid.slot)
dag.ancestorSlot(s9.state[], s9.bid, Slot(10)) == Opt.some(s9.bid.slot)
for b in [s0, s3, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(11)) == Opt.none(Slot)
for b in [s0, s1, s3, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(12)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s5, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(13)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s5, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(14)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(15)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(16)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(17)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(18)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(19)) == Opt.none(Slot)
for b in [s0, s1, s2, s3, s4, s5, s6, s7, s8, s9]:
check dag.ancestorSlot(s9.state[], b.bid, Slot(20)) == Opt.none(Slot)
template runShufflingTests(cfg: RuntimeConfig, numRandomTests: int) =
const
numValidators = SLOTS_PER_EPOCH
targetNumValidators = 20 * SLOTS_PER_EPOCH * MAX_DEPOSITS
var deposits = newSeqOfCap[Deposit](targetNumValidators)
for depositIndex in 0 ..< targetNumValidators:
deposits.add Deposit(data: makeDeposit(depositIndex.int, cfg = cfg))
let
eth1Data = Eth1Data(
deposit_root: deposits.attachMerkleProofs(),
deposit_count: deposits.lenu64)
validatorMonitor = newClone(ValidatorMonitor.init())
dag = ChainDAGRef.init(
cfg, makeTestDB(
numValidators, eth1Data = Opt.some(eth1Data),
flags = {}, cfg = cfg),
validatorMonitor, {})
quarantine = newClone(Quarantine.init())
rng = HmacDrbgContext.new()
taskpool = Taskpool.new()
var
verifier = BatchVerifier.init(rng, taskpool)
graffiti: GraffitiBytes
proc addBlocks(blocks: uint64, attested: bool, cache: var StateCache) =
inc distinctBase(graffiti)[0] # Avoid duplicate blocks across branches
for forkedBlck in makeTestBlocks(
dag.headState, cache, blocks.int, eth1_data = eth1Data,
attested = attested, allDeposits = deposits,
graffiti = graffiti, cfg = cfg):
let added = withBlck(forkedBlck):
const nilCallback = (consensusFork.OnBlockAddedCallback)(nil)
dag.addHeadBlock(verifier, forkyBlck, nilCallback)
check added.isOk()
dag.updateHead(added[], quarantine[], [])
var states: seq[ref ForkedHashedBeaconState]
# Genesis state
states.add newClone(dag.headState)
# Create a segment and cache the post state (0.75 epochs + empty slots)
proc createSegment(attested: bool, delaySlots = 0.uint64) =
var cache: StateCache
# Add some empty slots to have different deposit history
if delaySlots > 0:
var info: ForkedEpochInfo
check cfg.process_slots(
dag.headState,
getStateField(dag.headState, slot) + delaySlots,
cache, info, flags = {}).isOk
# Add 0.75 epochs
addBlocks((SLOTS_PER_EPOCH * 3) div 4, attested = attested, cache)
states.add newClone(dag.headState)
# Linear part of history (3.75 epochs)
for _ in 0 ..< 5:
createSegment(attested = true)
# Start branching (6 epochs + up to 0.5 epoch)
func numDelaySlots(branchId: int): uint64 =
branchId.uint64 * SLOTS_PER_EPOCH div 8
for a in 0 ..< 2:
let oldHead = dag.head
createSegment(attested = false, delaySlots = a.numDelaySlots)
for b in 0 ..< 2:
let oldHead = dag.head
createSegment(attested = false, delaySlots = b.numDelaySlots)
for _ in 0 ..< 3:
createSegment(attested = false, delaySlots = a.numDelaySlots)
createSegment(attested = false, delaySlots = b.numDelaySlots)
dag.updateHead(oldHead, quarantine[], [])
dag.updateHead(oldHead, quarantine[], [])
# Cover entire range of epochs plus some extra
const maxEpochOfInterest = compute_activation_exit_epoch(11.Epoch) + 2
template checkShuffling(
epochRef: Result[EpochRef, cstring],
computedShufflingRefParam: Opt[ShufflingRef]) =
## Check that computed shuffling matches the one from `EpochRef`.
block:
let computedShufflingRef = computedShufflingRefParam
if computedShufflingRef.isSome:
check computedShufflingRef.get[] == epochRef.get.shufflingRef[]
test "Accelerated shuffling computation":
randomize()
let forkBlocks = dag.forkBlocks.toSeq()
for _ in 0 ..< numRandomTests: # Each test runs against _all_ cached states
let
blck = sample(forkBlocks).data
epoch = rand(GENESIS_EPOCH .. maxEpochOfInterest)
checkpoint "blck: " & $shortLog(blck) & " / epoch: " & $shortLog(epoch)
let epochRef = dag.getEpochRef(blck, epoch, true)
check epochRef.isOk
let dependentBsi = dag.atSlot(blck.bid, epoch.attester_dependent_slot)
check dependentBsi.isSome
let
memoryMix = dag.computeRandaoMixFromMemory(
dependentBsi.get.bid, epoch.lowSlotForAttesterShuffling)
databaseMix = dag.computeRandaoMixFromDatabase(
dependentBsi.get.bid, epoch.lowSlotForAttesterShuffling)
# If shuffling is computable from DAG, check its correctness
epochRef.checkShuffling dag.computeShufflingRefFromMemory(blck, epoch)
# If shuffling is computable from DB, check its correctness
epochRef.checkShuffling dag.computeShufflingRefFromDatabase(blck, epoch)
# Shuffling should be correct when starting from any cached state
for state in states:
withState(state[]):
let
stateEpoch = forkyState.data.get_current_epoch
blckEpoch = blck.bid.slot.epoch
minEpoch = min(stateEpoch, blckEpoch)
lowSlot = epoch.lowSlotForAttesterShuffling
shufflingRef = dag.computeShufflingRef(forkyState, blck, epoch)
mix = dag.computeRandaoMix(forkyState,
dependentBsi.get.bid, epoch.lowSlotForAttesterShuffling)
if compute_activation_exit_epoch(minEpoch) <= epoch or
dag.ancestorSlot(
forkyState, dependentBsi.get.bid,
epoch.lowSlotForAttesterShuffling).isNone:
check:
shufflingRef.isNone
mix.isNone
else:
check shufflingRef.isSome
epochRef.checkShuffling shufflingRef
check:
mix.isSome
memoryMix.isNone or mix == memoryMix
databaseMix.isNone or mix == databaseMix
epochRef.checkShuffling Opt.some ShufflingRef(
epoch: epoch,
attester_dependent_root: dependentBsi.get.bid.root,
shuffled_active_validator_indices: forkyState.data
.get_shuffled_active_validator_indices(epoch, mix.get))
test "Accelerated shuffling computation (with epochRefState jump)":
# Test cases where `epochRefState` is set to a very old block
# that is advanced by several epochs to a recent slot.
#
# This is not dependent on the multilayer branching of the "Shufflings"
# suite, but a function of getEpochRef extending epochRefState towards
# a slot which it is essentially hallucinating a state, because it is
# not accounting for the blocks with deposits. As it takes non-trivial
# time to set up the "Shufflings" suite, we reuse its more complex DAG.
#
# The purely random fuzzing/tests have difficulty triggering this, because
# this needs to happen across a wide portion of the sampled range so that:
# (1) it checks a maximally early slot, both to create the gaps needed for
# (2) and (3), and to keep both blocks on the same forks, with maximal
# likelihood;
# (2) calls getEpochRef with a late enough epoch to trigger the
# hallucination of relevance (>= epoch 4 typically works); and
# (3) there then have to be enough slots between the last added block and
# the next state which will be sampled so that the validators can get
# active, after some spec 5 epoch delay. This pushes the lowest epoch
# possible to not much less than 8 which is already near the high end
# of the epoch sampling. Too early an epoch and it is within range of
# the headState check which gets it first, so the epochStateRef isn't
# exercised.
let forkBlocks = dag.forkBlocks.toSeq()
proc findKeyedBlck(m: Slot): int =
# Avoid depending on implementation details of how `forkBlocks` is ordered
for idx, fb in forkBlocks:
if fb.data.slot == m:
return idx
raiseAssert "Unreachable"
# The epoch for the first block can range from at least 4 to 10
for (blockIdx, epoch) in [
(findKeyedBlck(64.Slot), 10.Epoch),
(findKeyedBlck(255.Slot), 8.Epoch)]:
let
blck = forkBlocks[blockIdx].data
epochRef = dag.getEpochRef(blck, epoch, true)
doAssert epochRef.isOk
# If shuffling is computable from DAG, check its correctness
epochRef.checkShuffling dag.computeShufflingRefFromMemory(blck, epoch)
# If shuffling is computable from DB, check its correctness
epochRef.checkShuffling dag.computeShufflingRefFromDatabase(blck, epoch)
suite "Shufflings":
let cfg = defaultRuntimeConfig
runShufflingTests(cfg, numRandomTests = 150)
suite "Shufflings (merged)":
let cfg = block:
var cfg = defaultRuntimeConfig
cfg.ALTAIR_FORK_EPOCH = GENESIS_EPOCH
cfg.BELLATRIX_FORK_EPOCH = GENESIS_EPOCH
cfg
runShufflingTests(cfg, numRandomTests = 50)