nimbus-eth1/hive_integration/nodocker/engine/withdrawal_tests.nim

393 lines
14 KiB
Nim

import
withdrawals/wd_base_spec,
withdrawals/wd_block_value_spec,
withdrawals/wd_max_init_code_spec,
#withdrawals/wd_payload_body_spec,
withdrawals/wd_reorg_spec,
withdrawals/wd_sync_spec,
./types,
./test_env
proc specExecute[T](ws: BaseSpec): bool =
let
ws = T(ws)
conf = envConfig(ws.getForkConfig())
discard ws.getGenesis(conf.networkParams)
let env = TestEnv.new(conf)
env.engine.setRealTTD(0)
env.setupCLMock()
ws.configureCLMock(env.clMock)
result = ws.execute(env)
env.close()
let wdTestList* = [
#Re-Org tests
TestDesc(
name: "Withdrawals Fork on Block 1 - 8 Block Re-Org, Sync",
about: "Tests a 8 block re-org using NewPayload. Re-org does not change withdrawals fork height",
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 1, # Genesis is Pre-Withdrawals
wdBlockCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
reOrgBlockCount: 8,
reOrgViaSync: true,
)),
TestDesc(
name: "Withdrawals Fork on Block 8 - 10 Block Re-Org Sync",
about: " Tests a 10 block re-org using sync",
# Re-org does not change withdrawals fork height, but changes
# the payload at the height of the fork
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 8, # Genesis is Pre-Withdrawals
wdBlockCount: 8,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
reOrgBlockCount: 10,
reOrgViaSync: true,
)),
TestDesc(
name: "Withdrawals Fork on Canonical Block 8 / Side Block 7 - 10 Block Re-Org Sync",
about: "Tests a 10 block re-org using sync",
# Sidechain reaches withdrawals fork at a lower block height
# than the canonical chain
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 8, # Genesis is Pre-Withdrawals
wdBlockCount: 8,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
reOrgBlockCount: 10,
reOrgViaSync: true,
sidechaintimeIncrements: 2,
)),
TestDesc(
name: "Withdrawals Fork on Canonical Block 8 / Side Block 9 - 10 Block Re-Org Sync",
about: "Tests a 10 block re-org using sync",
# Sidechain reaches withdrawals fork at a higher block height
# than the canonical chain
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 8, # Genesis is Pre-Withdrawals
wdBlockCount: 8,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
timeIncrements: 2,
reOrgBlockCount: 10,
reOrgViaSync: true,
sidechaintimeIncrements: 1,
)),
TestDesc(
name: "Withdrawals Fork on Block 1 - 1 Block Re-Org",
about: "Tests a simple 1 block re-org",
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 1, # Genesis is Pre-Withdrawals
wdBlockCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
reOrgBlockCount: 1,
reOrgViaSync: false,
)),
TestDesc(
name: "Withdrawals Fork on Block 1 - 8 Block Re-Org NewPayload",
about: "Tests a 8 block re-org using NewPayload. Re-org does not change withdrawals fork height",
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 1, # Genesis is Pre-Withdrawals
wdBlockCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
reOrgBlockCount: 8,
reOrgViaSync: false,
)),
TestDesc(
name: "Withdrawals Fork on Block 8 - 10 Block Re-Org NewPayload",
about: "Tests a 10 block re-org using NewPayload\n" &
"Re-org does not change withdrawals fork height, but changes\n" &
"the payload at the height of the fork\n",
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 8, # Genesis is Pre-Withdrawals
wdBlockCount: 8,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
reOrgBlockCount: 10,
reOrgViaSync: false,
)),
TestDesc(
name: "Withdrawals Fork on Canonical Block 8 / Side Block 7 - 10 Block Re-Org",
about: "Tests a 10 block re-org using NewPayload",
# Sidechain reaches withdrawals fork at a lower block height
# than the canonical chain
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 8, # Genesis is Pre-Withdrawals
wdBlockCount: 8,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
reOrgBlockCount: 10,
reOrgViaSync: false,
sidechaintimeIncrements: 2,
)),
TestDesc(
name: "Withdrawals Fork on Canonical Block 8 / Side Block 9 - 10 Block Re-Org",
about: "Tests a 10 block re-org using NewPayload",
# Sidechain reaches withdrawals fork at a higher block height
# than the canonical chain
run: specExecute[ReorgSpec],
spec: ReorgSpec(
slotsToSafe: u256(32),
slotsToFinalized: u256(64),
timeoutSeconds: 300,
wdForkHeight: 8, # Genesis is Pre-Withdrawals
wdBlockCount: 8,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
timeIncrements: 2,
reOrgBlockCount: 10,
reOrgViaSync: false,
sidechaintimeIncrements: 1,
)),
# Sync Tests
TestDesc(
name: "Sync after 2 blocks - Withdrawals on Block 1 - Single Withdrawal Account - No Transactions",
about: "- Spawn a first client\n" &
"- Go through withdrawals fork on Block 1\n" &
"- Withdraw to a single account MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 2 blocks\n" &
"- Spawn a secondary client and send FCUV2(head)\n" &
"- Wait for sync and verify withdrawn account's balance\n",
run: specExecute[SyncSpec],
spec: SyncSpec(
timeoutSeconds: 6,
wdForkHeight: 1,
wdBlockCount: 2,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: 1,
txPerBlock: some(0),
syncSteps: 1,
)),
TestDesc(
name: "Sync after 2 blocks - Withdrawals on Block 1 - Single Withdrawal Account",
about: "- Spawn a first client\n" &
"- Go through withdrawals fork on Block 1\n" &
"- Withdraw to a single account MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 2 blocks\n" &
"- Spawn a secondary client and send FCUV2(head)\n" &
"- Wait for sync and verify withdrawn account's balance\n",
run: specExecute[SyncSpec],
spec: SyncSpec(
wdForkHeight: 1,
wdBlockCount: 2,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: 1,
syncSteps: 1,
)),
TestDesc(
name: "Sync after 2 blocks - Withdrawals on Genesis - Single Withdrawal Account",
about: "- Spawn a first client, with Withdrawals since genesis\n" &
"- Withdraw to a single account MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 2 blocks\n" &
"- Spawn a secondary client and send FCUV2(head)\n" &
"- Wait for sync and verify withdrawn account's balance\n",
run: specExecute[SyncSpec],
spec: SyncSpec(
wdForkHeight: 0,
wdBlockCount: 2,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: 1,
syncSteps: 1,
)),
TestDesc(
name: "Sync after 2 blocks - Withdrawals on Block 2 - Multiple Withdrawal Accounts - No Transactions",
about: "- Spawn a first client\n" &
"- Go through withdrawals fork on Block 2\n" &
"- Withdraw to MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK accounts each block for 2 blocks\n" &
"- Spawn a secondary client and send FCUV2(head)\n" &
"- Wait for sync, which include syncing a pre-Withdrawals block, and verify withdrawn account's balance\n",
run: specExecute[SyncSpec],
spec: SyncSpec(
wdForkHeight: 2,
wdBlockCount: 2,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
txPerBlock: some(0),
syncSteps: 1,
)),
TestDesc(
name: "Sync after 2 blocks - Withdrawals on Block 2 - Multiple Withdrawal Accounts",
about: "- Spawn a first client\n" &
"- Go through withdrawals fork on Block 2\n" &
"- Withdraw to MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK accounts each block for 2 blocks\n" &
"- Spawn a secondary client and send FCUV2(head)\n" &
"- Wait for sync, which include syncing a pre-Withdrawals block, and verify withdrawn account's balance\n",
run: specExecute[SyncSpec],
spec: SyncSpec(
wdForkHeight: 2,
wdBlockCount: 2,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
syncSteps: 1,
)),
TestDesc(
name: "Sync after 128 blocks - Withdrawals on Block 2 - Multiple Withdrawal Accounts",
about: "- Spawn a first client\n" &
"- Go through withdrawals fork on Block 2\n" &
"- Withdraw to many accounts MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 128 blocks\n" &
"- Spawn a secondary client and send FCUV2(head)\n" &
"- Wait for sync, which include syncing a pre-Withdrawals block, and verify withdrawn account's balance\n",
run: specExecute[SyncSpec],
spec: SyncSpec(
timeoutSeconds: 100,
wdForkHeight: 2,
wdBlockCount: 128,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: 1024,
syncSteps: 1,
)),
# EVM Tests (EIP-3651, EIP-3855, EIP-3860)
TestDesc(
name: "Max Initcode Size",
run: specExecute[MaxInitcodeSizeSpec],
spec: MaxInitcodeSizeSpec(
wdForkHeight: 2, # Block 1 is Pre-Withdrawals
wdBlockCount: 2,
overflowMaxInitcodeTxCountBeforeFork: 0,
overflowMaxInitcodeTxCountAfterFork: 1,
)),
# Block value tests
TestDesc(
name: "GetPayloadV2 Block Value",
about: "Verify the block value returned in GetPayloadV2.",
run: specExecute[BlockValueSpec],
spec: BlockValueSpec(
wdForkHeight: 1,
wdBlockCount: 1,
)),
# Base tests
TestDesc(
name: "Withdrawals Fork On Genesis",
about: "Tests the withdrawals fork happening since genesis (e.g. on a testnet).",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 0,
wdBlockCount: 2, # Genesis is a withdrawals block
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
)),
TestDesc(
name: "Withdrawals Fork on Block 1",
about: "Tests the withdrawals fork happening directly after genesis.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 1, # Only Genesis is Pre-Withdrawals
wdBlockCount: 1,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
)),
TestDesc(
name: "Withdrawals Fork on Block 2",
about: "Tests the transition to the withdrawals fork after a single block" &
" has happened. Block 1 is sent with invalid non-null withdrawals payload and" &
" client is expected to respond with the appropriate error.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 2, # Genesis and Block 1 are Pre-Withdrawals
wdBlockCount: 1,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
)),
TestDesc(
name: "Withdrawals Fork on Block 3",
about: "Tests the transition to the withdrawals fork after two blocks" &
" have happened. Block 2 is sent with invalid non-null withdrawals payload and" &
" client is expected to respond with the appropriate error.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 3, # Genesis, Block 1 and 2 are Pre-Withdrawals
wdBlockCount: 1,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
)),
TestDesc(
name: "Withdraw to a single account",
about: "Make multiple withdrawals to a single account.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 1,
wdBlockCount: 1,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: 1,
)),
TestDesc(
name: "Withdraw to two accounts",
about: "Make multiple withdrawals to two different accounts, repeated in" &
" round-robin. Reasoning: There might be a difference in implementation when an" &
" account appears multiple times in the withdrawals list but the list" &
" is not in ordered sequence.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 1,
wdBlockCount: 1,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: 2,
)),
TestDesc(
name: "Withdraw many accounts",
about: "Make multiple withdrawals to MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK * 5 different accounts." &
" Execute many blocks this way.",
# TimeoutSeconds: 240,
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 1,
wdBlockCount: 4,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK * 5,
wdAbleAccountCount: 1024,
)),
TestDesc(
name: "Withdraw zero amount",
about: "Make multiple withdrawals where the amount withdrawn is 0.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 1,
wdBlockCount: 1,
wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK,
wdAbleAccountCount: 2,
wdAmounts: @[0'u64, 1'u64]
)),
TestDesc(
name: "Empty Withdrawals",
about: "Produce withdrawals block with zero withdrawals.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 1,
wdBlockCount: 1,
wdPerBlock: 0,
)),
TestDesc(
name: "Corrupted Block Hash Payload (INVALID)",
about: "Send a valid payload with a corrupted hash using engine_newPayloadV2.",
run: specExecute[WDBaseSpec],
spec: WDBaseSpec(
wdForkHeight: 1,
wdBlockCount: 1,
testCorrupedHashPayloads: true,
)
),
]