import withdrawals/wd_base_spec, withdrawals/wd_block_value_spec, withdrawals/wd_max_init_code_spec, #withdrawals/wd_payload_body_spec, withdrawals/wd_reorg_spec, withdrawals/wd_sync_spec, ./types, ./test_env proc specExecute[T](ws: BaseSpec): bool = let ws = T(ws) conf = envConfig(ws.getForkConfig()) discard ws.getGenesis(conf.networkParams) let env = TestEnv.new(conf) env.engine.setRealTTD(0) env.setupCLMock() ws.configureCLMock(env.clMock) result = ws.execute(env) env.close() let wdTestList* = [ #Re-Org tests TestDesc( name: "Withdrawals Fork on Block 1 - 8 Block Re-Org, Sync", about: "Tests a 8 block re-org using NewPayload. Re-org does not change withdrawals fork height", run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 1, # Genesis is Pre-Withdrawals wdBlockCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, reOrgBlockCount: 8, reOrgViaSync: true, )), TestDesc( name: "Withdrawals Fork on Block 8 - 10 Block Re-Org Sync", about: " Tests a 10 block re-org using sync", # Re-org does not change withdrawals fork height, but changes # the payload at the height of the fork run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 8, # Genesis is Pre-Withdrawals wdBlockCount: 8, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, reOrgBlockCount: 10, reOrgViaSync: true, )), TestDesc( name: "Withdrawals Fork on Canonical Block 8 / Side Block 7 - 10 Block Re-Org Sync", about: "Tests a 10 block re-org using sync", # Sidechain reaches withdrawals fork at a lower block height # than the canonical chain run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 8, # Genesis is Pre-Withdrawals wdBlockCount: 8, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, reOrgBlockCount: 10, reOrgViaSync: true, sidechaintimeIncrements: 2, )), TestDesc( name: "Withdrawals Fork on Canonical Block 8 / Side Block 9 - 10 Block Re-Org Sync", about: "Tests a 10 block re-org using sync", # Sidechain reaches withdrawals fork at a higher block height # than the canonical chain run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 8, # Genesis is Pre-Withdrawals wdBlockCount: 8, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, timeIncrements: 2, reOrgBlockCount: 10, reOrgViaSync: true, sidechaintimeIncrements: 1, )), TestDesc( name: "Withdrawals Fork on Block 1 - 1 Block Re-Org", about: "Tests a simple 1 block re-org", run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 1, # Genesis is Pre-Withdrawals wdBlockCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, reOrgBlockCount: 1, reOrgViaSync: false, )), TestDesc( name: "Withdrawals Fork on Block 1 - 8 Block Re-Org NewPayload", about: "Tests a 8 block re-org using NewPayload. Re-org does not change withdrawals fork height", run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 1, # Genesis is Pre-Withdrawals wdBlockCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, reOrgBlockCount: 8, reOrgViaSync: false, )), TestDesc( name: "Withdrawals Fork on Block 8 - 10 Block Re-Org NewPayload", about: "Tests a 10 block re-org using NewPayload\n" & "Re-org does not change withdrawals fork height, but changes\n" & "the payload at the height of the fork\n", run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 8, # Genesis is Pre-Withdrawals wdBlockCount: 8, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, reOrgBlockCount: 10, reOrgViaSync: false, )), TestDesc( name: "Withdrawals Fork on Canonical Block 8 / Side Block 7 - 10 Block Re-Org", about: "Tests a 10 block re-org using NewPayload", # Sidechain reaches withdrawals fork at a lower block height # than the canonical chain run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 8, # Genesis is Pre-Withdrawals wdBlockCount: 8, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, reOrgBlockCount: 10, reOrgViaSync: false, sidechaintimeIncrements: 2, )), TestDesc( name: "Withdrawals Fork on Canonical Block 8 / Side Block 9 - 10 Block Re-Org", about: "Tests a 10 block re-org using NewPayload", # Sidechain reaches withdrawals fork at a higher block height # than the canonical chain run: specExecute[ReorgSpec], spec: ReorgSpec( slotsToSafe: u256(32), slotsToFinalized: u256(64), timeoutSeconds: 300, wdForkHeight: 8, # Genesis is Pre-Withdrawals wdBlockCount: 8, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, timeIncrements: 2, reOrgBlockCount: 10, reOrgViaSync: false, sidechaintimeIncrements: 1, )), # Sync Tests TestDesc( name: "Sync after 2 blocks - Withdrawals on Block 1 - Single Withdrawal Account - No Transactions", about: "- Spawn a first client\n" & "- Go through withdrawals fork on Block 1\n" & "- Withdraw to a single account MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 2 blocks\n" & "- Spawn a secondary client and send FCUV2(head)\n" & "- Wait for sync and verify withdrawn account's balance\n", run: specExecute[SyncSpec], spec: SyncSpec( timeoutSeconds: 6, wdForkHeight: 1, wdBlockCount: 2, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: 1, txPerBlock: some(0), syncSteps: 1, )), TestDesc( name: "Sync after 2 blocks - Withdrawals on Block 1 - Single Withdrawal Account", about: "- Spawn a first client\n" & "- Go through withdrawals fork on Block 1\n" & "- Withdraw to a single account MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 2 blocks\n" & "- Spawn a secondary client and send FCUV2(head)\n" & "- Wait for sync and verify withdrawn account's balance\n", run: specExecute[SyncSpec], spec: SyncSpec( wdForkHeight: 1, wdBlockCount: 2, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: 1, syncSteps: 1, )), TestDesc( name: "Sync after 2 blocks - Withdrawals on Genesis - Single Withdrawal Account", about: "- Spawn a first client, with Withdrawals since genesis\n" & "- Withdraw to a single account MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 2 blocks\n" & "- Spawn a secondary client and send FCUV2(head)\n" & "- Wait for sync and verify withdrawn account's balance\n", run: specExecute[SyncSpec], spec: SyncSpec( wdForkHeight: 0, wdBlockCount: 2, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: 1, syncSteps: 1, )), TestDesc( name: "Sync after 2 blocks - Withdrawals on Block 2 - Multiple Withdrawal Accounts - No Transactions", about: "- Spawn a first client\n" & "- Go through withdrawals fork on Block 2\n" & "- Withdraw to MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK accounts each block for 2 blocks\n" & "- Spawn a secondary client and send FCUV2(head)\n" & "- Wait for sync, which include syncing a pre-Withdrawals block, and verify withdrawn account's balance\n", run: specExecute[SyncSpec], spec: SyncSpec( wdForkHeight: 2, wdBlockCount: 2, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, txPerBlock: some(0), syncSteps: 1, )), TestDesc( name: "Sync after 2 blocks - Withdrawals on Block 2 - Multiple Withdrawal Accounts", about: "- Spawn a first client\n" & "- Go through withdrawals fork on Block 2\n" & "- Withdraw to MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK accounts each block for 2 blocks\n" & "- Spawn a secondary client and send FCUV2(head)\n" & "- Wait for sync, which include syncing a pre-Withdrawals block, and verify withdrawn account's balance\n", run: specExecute[SyncSpec], spec: SyncSpec( wdForkHeight: 2, wdBlockCount: 2, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, syncSteps: 1, )), TestDesc( name: "Sync after 128 blocks - Withdrawals on Block 2 - Multiple Withdrawal Accounts", about: "- Spawn a first client\n" & "- Go through withdrawals fork on Block 2\n" & "- Withdraw to many accounts MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK times each block for 128 blocks\n" & "- Spawn a secondary client and send FCUV2(head)\n" & "- Wait for sync, which include syncing a pre-Withdrawals block, and verify withdrawn account's balance\n", run: specExecute[SyncSpec], spec: SyncSpec( timeoutSeconds: 100, wdForkHeight: 2, wdBlockCount: 128, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: 1024, syncSteps: 1, )), # EVM Tests (EIP-3651, EIP-3855, EIP-3860) TestDesc( name: "Max Initcode Size", run: specExecute[MaxInitcodeSizeSpec], spec: MaxInitcodeSizeSpec( wdForkHeight: 2, # Block 1 is Pre-Withdrawals wdBlockCount: 2, overflowMaxInitcodeTxCountBeforeFork: 0, overflowMaxInitcodeTxCountAfterFork: 1, )), # Block value tests TestDesc( name: "GetPayloadV2 Block Value", about: "Verify the block value returned in GetPayloadV2.", run: specExecute[BlockValueSpec], spec: BlockValueSpec( wdForkHeight: 1, wdBlockCount: 1, )), # Base tests TestDesc( name: "Withdrawals Fork On Genesis", about: "Tests the withdrawals fork happening since genesis (e.g. on a testnet).", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 0, wdBlockCount: 2, # Genesis is a withdrawals block wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, )), TestDesc( name: "Withdrawals Fork on Block 1", about: "Tests the withdrawals fork happening directly after genesis.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 1, # Only Genesis is Pre-Withdrawals wdBlockCount: 1, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, )), TestDesc( name: "Withdrawals Fork on Block 2", about: "Tests the transition to the withdrawals fork after a single block" & " has happened. Block 1 is sent with invalid non-null withdrawals payload and" & " client is expected to respond with the appropriate error.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 2, # Genesis and Block 1 are Pre-Withdrawals wdBlockCount: 1, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, )), TestDesc( name: "Withdrawals Fork on Block 3", about: "Tests the transition to the withdrawals fork after two blocks" & " have happened. Block 2 is sent with invalid non-null withdrawals payload and" & " client is expected to respond with the appropriate error.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 3, # Genesis, Block 1 and 2 are Pre-Withdrawals wdBlockCount: 1, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, )), TestDesc( name: "Withdraw to a single account", about: "Make multiple withdrawals to a single account.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 1, wdBlockCount: 1, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: 1, )), TestDesc( name: "Withdraw to two accounts", about: "Make multiple withdrawals to two different accounts, repeated in" & " round-robin. Reasoning: There might be a difference in implementation when an" & " account appears multiple times in the withdrawals list but the list" & " is not in ordered sequence.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 1, wdBlockCount: 1, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: 2, )), TestDesc( name: "Withdraw many accounts", about: "Make multiple withdrawals to MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK * 5 different accounts." & " Execute many blocks this way.", # TimeoutSeconds: 240, run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 1, wdBlockCount: 4, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK * 5, wdAbleAccountCount: 1024, )), TestDesc( name: "Withdraw zero amount", about: "Make multiple withdrawals where the amount withdrawn is 0.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 1, wdBlockCount: 1, wdPerBlock: MAINNET_MAX_WITHDRAWAL_COUNT_PER_BLOCK, wdAbleAccountCount: 2, wdAmounts: @[0'u64, 1'u64] )), TestDesc( name: "Empty Withdrawals", about: "Produce withdrawals block with zero withdrawals.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 1, wdBlockCount: 1, wdPerBlock: 0, )), TestDesc( name: "Corrupted Block Hash Payload (INVALID)", about: "Send a valid payload with a corrupted hash using engine_newPayloadV2.", run: specExecute[WDBaseSpec], spec: WDBaseSpec( wdForkHeight: 1, wdBlockCount: 1, testCorrupedHashPayloads: true, ) ), ]