nimbus-eth1/run-kurtosis-check.sh

253 lines
7.8 KiB
Bash
Executable File

#!/bin/bash
# Nimbus
# Copyright (c) 2024 Status Research & Development GmbH
# Licensed under either of
# * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE) or
# http://www.apache.org/licenses/LICENSE-2.0)
# * MIT license ([LICENSE-MIT](LICENSE-MIT) or
# http://opensource.org/licenses/MIT)
# at your option. This file may not be copied, modified, or distributed except
# according to those terms.
# ------------------------------------------------
# Inputs on how to run checks
# ------------------------------------------------
echo
printf "Do you want to run the checks in terminal or visit the assertoor URL? (terminal/url) "
read reply
echo
printf "Build new changes (yes/no)? "
read use_previous_image
# ------------------------------------------------
# Installation Checks
# ------------------------------------------------
# Checking for docker installation
echo "Checking docker installation"
if command -v docker &> /dev/null; then
echo "Docker installation found"
else
echo "Docker installation not found. Please install docker."
exit 1
fi
echo "Checking kurtosis installation"
if command -v kurtosis &> /dev/null; then
echo "Kurtosis installation found"
else
echo "Kurtosis installation not found. Installing kurtosis"
echo "deb [trusted=yes] https://apt.fury.io/kurtosis-tech/ /" | sudo tee /etc/apt/sources.list.d/kurtosis.list
sudo apt-get update
sudo apt-get install -y kurtosis
fi
# Install jq if not installed already
if [ "$(which jq)" != "" ];
then
echo "jq is already installed"
else
echo "jq is not installed. Installing jq"
sudo apt-get install -y jq
fi
new_el_image="localtestnet"
# ------------------------------------------------
# Build the Docker Image
# ------------------------------------------------
if [[ "$use_previous_image" == "no" ]]; then
echo "Using the previously built docker image"
echo
echo -n "Please enter the docker image name (default: localtestnet) "
read -r el_image
if [[ "$el_image" == "" ]]; then
new_el_image="localtestnet"
else
new_el_image=$el_image
fi
else
echo "Starting the Docker Build!"
# Build the docker Image
sudo docker build . -t localtestnet
# The new el_image value
new_el_image="localtestnet"
fi
# ------------------------------------------------
# Run the Kurtosis Tests
# ------------------------------------------------
# Use sed to replace the el_image value in the file
cat kurtosis-network-params.yml | envsubst > assertoor.yaml
sed -i "s/el_image: .*/el_image: $new_el_image/" assertoor.yaml
sudo kurtosis run \
--enclave nimbus-localtestnet \
github.com/kurtosis-tech/ethereum-package \
--args-file assertoor.yaml
enclave_dump=$(kurtosis enclave inspect nimbus-localtestnet)
assertoor_url=$(echo "$enclave_dump" | grep assertoor | grep http | sed 's/.*\(http:\/\/[0-9.:]\+\).*/\1/')
# ------------------------------------------------
# Remove Generated File
# ------------------------------------------------
rm assertoor.yaml
# Check the user's input and respond accordingly
if [[ "$reply" == "url" ]]; then
echo "You chose to visit the assertoor URL."
echo "Assertoor Checks Please Visit -> ${assertoor_url}"
echo "Please visit the URL to check the status of the tests"
echo "The kurtosis enclave needs to be cleared, after the tests are done. Please run the following command ----- sudo kurtosis enclave rm -f nimbus-localtestnet"
else
echo "Running the checks over terminal"
# ------------------------------------------------
# Check for Test Status
# ------------------------------------------------
YELLOW='\033[1;33m'
GRAY='\033[0;37m'
GREEN='\033[0;32m'
RED='\033[0;31m'
NC='\033[0m'
# print assertor logs
assertoor_container=$(docker container list | grep assertoor | sed 's/^\([^ ]\+\) .*$/\1/')
docker logs -f "$assertoor_container" &
# helper to fetch task status for specific test id
get_tasks_status() {
tasks=$(curl -s "${assertoor_url}"/api/v1/test_run/"$1" | jq -c ".data.tasks[] | {index, parent_index, name, title, status, result}")
declare -A task_graph_map
task_graph_map[0]=""
while read task; do
task_id=$(echo "$task" | jq -r ".index")
task_parent=$(echo "$task" | jq -r ".parent_index")
task_name=$(echo "$task" | jq -r ".name")
task_title=$(echo "$task" | jq -r ".title")
task_status=$(echo "$task" | jq -r ".status")
task_result=$(echo "$task" | jq -r ".result")
task_graph="${task_graph_map[$task_parent]}"
task_graph_map[$task_id]="$task_graph |"
if [ ! -z "$task_graph" ]; then
task_graph="${task_graph}- "
fi
if [ "$task_status" == "pending" ]; then
task_status="${GRAY}pending ${NC}"
elif [ "$task_status" == "running" ]; then
task_status="${YELLOW}running ${NC}"
elif [ "$task_status" == "complete" ]; then
task_status="${GREEN}complete${NC}"
fi
if [ "$task_result" == "none" ]; then
task_result="${GRAY}none ${NC}"
elif [ "$task_result" == "success" ]; then
task_result="${GREEN}success${NC}"
elif [ "$task_result" == "failure" ]; then
task_result="${RED}failure${NC}"
fi
echo -e " $(printf '%-4s' "$task_id")\t$task_status\t$task_result\t$(printf '%-50s' "$task_graph$task_name") \t$task_title"
done <<< $(echo "$tasks")
}
# poll & check test status
final_test_result=""
failed_test_id=""
while true
do
pending_tests=0
failed_tests=0
total_tests=0
running_test=""
status_lines=()
task_lines=""
status_lines+=("$(date +'%Y-%m-%d %H:%M:%S') Test Status:")
tests=$(curl -s "${assertoor_url}"/api/v1/test_runs | jq -c ".data[] | {run_id, test_id, name, status}")
while read test; do
if [ -z "$test" ]; then
continue
fi
run_id=$(echo "$test" | jq -r ".run_id")
test_id=$(echo "$test" | jq -r ".test_id")
test_name=$(echo "$test" | jq -r ".name")
test_status=$(echo "$test" | jq -r ".status")
if [ "$test_status" == "pending" ]; then
pending_tests=$(expr $pending_tests + 1)
status_name="${GRAY}pending${NC}"
elif [ "$test_status" == "running" ]; then
pending_tests=$(expr $pending_tests + 1)
running_test="$run_id"
status_name="${YELLOW}running${NC}"
elif [ "$test_status" == "success" ]; then
status_name="${GREEN}success${NC}"
elif [ "$test_status" == "failure" ]; then
failed_tests=$(expr $failed_tests + 1)
failed_test_id="$run_id"
status_name="${RED}failure${NC}"
else
status_name="$test_status"
fi
status_lines+=(" $(printf '%-3s' "$test_id") $status_name \t$test_name")
total_tests=$(expr $total_tests + 1)
done <<< $(echo "$tests")
for status_line in "${status_lines[@]}"
do
echo -e "$status_line"
done
if ! [ -z "$running_test" ]; then
task_lines=$(get_tasks_status "$running_test")
echo "Active Test Task Status:"
echo "$task_lines"
fi
if [ "$failed_tests" -gt 0 ]; then
final_test_result="failure"
break
fi
if [ "$total_tests" -gt 0 ] && [ "$pending_tests" -le 0 ]; then
final_test_result="success"
break
fi
sleep 60
done
# save test results & status to github output
echo "test_result=$(echo "$final_test_result")"
echo "test_status"
for status_line in "${status_lines[@]}"
do
echo -e "$status_line"
done
echo
if ! [ -z "$failed_test_id" ]; then
echo "failed_test_status"
get_tasks_status "$failed_test_id"
echo ""
else
echo "failed_test_status="
fi
# ------------------------------------------------
# Cleanup
# ------------------------------------------------
sudo kurtosis enclave rm -f nimbus-localtestnet
fi