* Updated to the latest nim-eth, nim-rocksdb, nim-web3
* Bump nimbus-eth2 module and fix related issues
Temporarily disabling Portal beacon light client network as it is
a lot of copy pasted code that did not yet take into account
forks. This will require a bigger rework and was not yet tested
in an actual network anyhow.
* More nimbus fixes after module bumps
---------
Co-authored-by: Adam Spitz <adamspitz@status.im>
Co-authored-by: jangko <jangko128@gmail.com>
Two unresolved items currently:
- Three tests that are temporarily disabled as they fail in the
macro_assembler code, which seems to be due to an ambigious
identifier Stop (Ops and chronos ServerCommand enum).
- i386 CI disabled as it fails at Nim compilation already. Failed
tests where already ignored for this target.
why:
Clique relies on the even/odd position of an address after sorting. For
address generation, the Nim PRNG was used which seems to have changed
with Nim 1.6.11 (Linux, Windoes only.)
As a replace, the Posix.1-2001 example (two-liner calculation) generator
is used.
* Extracted RocksDB timing unit tests into separate file
why:
make space for more in main module :)
* Extracted `inspectionRunner()` unit tests into separate file
why:
make space for more in main module :)
* Extracted `storagesRunner()` unit tests into separate file
why:
make space for more in main module :)
* Extracted pivot checkpoint store/retrieval unit tests into separate file
why:
make space for more in main module :)
* Extract helper functions into separate source file
* Extracted account import unit tests into separate file
why:
make space for more in main module :)
* Rename `test_decompose()` => `test_NodeRangeDecompose()`
why:
There will be more functions with `test_NodeRange` prefix.
* Move BlockHeaderWithProof content to content key selector 0
- Remove as content type with content key selector 4
- Replace regular block header with BlockHeaderWithProof at
content key selector 0
* Apply blockHeader content key also to bridge
* Add tests for header with proof generation and verification
* Cosmetics, update logger `topics`
* Clean up sync/start methods in nimbus
why:
* The `protocols` list selects served (as opposed to sync) protocols only.
* The `SyncMode.Default` object is allocated with the other possible sync
mode objects.
* Add snap service stub to `nimbus`
* Provide full set of snap response handler stubs
* Bicarb for the latest CI hiccup
why:
Might be a change in the CI engine for MacOS.
This is an example of how the beacon state historical_roots could
be added with a proof to be able to provide on the network and
verify by means of proof against the state root.
* Simplify pivot update
why:
No need to fetch the pivot header from the network when it can be
be made available in the ivot cache
also:
Keep `txPool` update disabled while syncing
* Cosmetics, tune down some logging noise
* Support `snap/1` without `eth/6?`
why:
Eth is not needed here.
* Snap is an (optional) extension of `eth`
so:
It it must be supported somehow. Nevertheless it will be currently
unused in the snap syncer.
* Register external beacon stream header
why:
This will be used to sync the peers against.
* Update total coverage book-keeping for 100% roll-over
details:
Provide commonly available/used function
* Replace best pivot by beacon stream tracker
details:
Beacon stream header cache will be updated by external chain monitor via
RPC. This cached header will then be used to sync the pivot.
why:
Some peers reconnect recurrently after dialogue was found useless. The
reconnect loop protection was in place already, albeit insufficient.
also:
Some updates to allow setting previously constant parameters at run
time.
* Simplify accounts healing threshold management
why:
Was over-engineered.
details:
Previously, healing was based on recursive hexary trie perusal.
Due to "cheap" envelope decomposition of a range complement for the
hexary trie, the cost of running extra laps have become time-affordable
again and a simple trigger mechanism for healing will do.
* Control number of dangling result nodes in `hexaryInspectTrie()`
also:
+ Returns number of visited nodes available for logging so the maximum
number of nodes can be tuned accordingly.
+ Some code and docu update
* Update names of constants
why:
Declutter, more systematic naming
* Re-implemented `worker_desc.merge()` for storage slots
why:
Provided as proper queue management in `storage_queue_helper`.
details:
+ Several append modes (replaces `merge()`)
+ Added third queue to record entries currently fetched by a worker. So
another parallel running worker can safe the complete set of storage
slots in as checkpoint. This was previously lost.
* Refactor healing
why:
Simplify and remove deep hexary trie perusal for finding completeness.
Due to "cheap" envelope decomposition of a range complement for the
hexary trie, the cost of running extra laps have become time-affordable
again and a simple trigger mechanism for healing will do.
* Docu update
* Run a storage job only once in download loop
why:
Download failure or rejection (i.e. missing data) lead to repeated
fetch requests until peer disconnects, otherwise.
* Relocated mothballing (i.e. swap-in preparation) logic
details:
Mothballing was previously tested & started after downloading
account ranges in `range_fetch_accounts`.
Whenever current download or healing stops because of a pivot change,
swap-in preparation is needed (otherwise some storage slots may get
lost when swap-in takes place.)
Also, `execSnapSyncAction()` has been moved back to `pivot_helper`.
* Reorganised source file directories
details:
Grouped pivot focused modules into `pivot` directory
* Renamed `checkNodes`, `sickSubTries` as `nodes.check`, `nodes.missing`
why:
Both lists are typically used together as pair. Renaming `sickSubTries`
reflects moving away from a healing centric view towards a swap-in
attitude.
* Multi times coverage recording
details:
Per pivot account ranges are accumulated into coverage range set. This
set fill eventually contain a singe range of account hashes [0..2^256]
which amounts to 100% capacity.
A counter has been added that is incremented whenever max capacity is
reached. The accumulated range is then reset to empty.
The effect of this setting is that the coverage can be evenly duplicated.
So 200% would not accumulate on a particular region.
* Update range length comparisons (mod 2^256)
why:
A range interval can have sizes 1..2^256 as it cannot be empty by
definition. The number of points in a range intervals set can have
0..2^256 points. As the scalar range is a residue class modulo 2^256,
the residue class 0 means length 2^256 for a range interval, but can
be 0 or 2^256 for the number of points in a range intervals set.
* Generalised `hexaryEnvelopeDecompose()`
details:
Compile the complement of the union of some (processed) intervals and
express this complement as a list of envelopes of sub-tries.
This facility is directly applicable to swap-in book-keeping.
* Re-factor `swapIn()`
why:
Good idea but baloney implementation. The main algorithm is based on
the generalised version of `hexaryEnvelopeDecompose()` which has been
derived from this implementation.
* Refactor `healAccounts()` using `hexaryEnvelopeDecompose()` as main driver
why:
Previously, the hexary trie was searched recursively for dangling nodes
which has a poor worst case performance already when the trie is
reasonably populated.
The function `hexaryEnvelopeDecompose()` is a magnitude faster because
it does not peruse existing sub-tries in order to find missing nodes
although result is not fully compatible with the previous function.
So recursive search is used in a limited mode only when the decomposer
will not deliver a useful result.
* Logging & maintenance fixes
details:
Preparation for abandoning buddy-global healing variables `node`,
`resumeCtx`, and `lockTriePerusal`. These variable are trie-perusal
centric which will be run on the back burner in favour of
`hexaryEnvelopeDecompose()` which is used for accounts healing already.
* Additional logging for scheduler
* Fix duplicate occurrence of `bestNumber`
why:
Happened when the `block_queue` module was separated out of
the `worker` module. Somehow testing was insufficient or skipped,
at all.
* Update `runPool()` mixin for scheduler
details:
Could be simplified
* Dynamically adapt pivot header negotiation mode
details:
After accepting one peer and some timeout, do not search for more
peers for start syncing but rather continue in relaxed mode with a
single peer.
The portal_*Offer call was changed in the specs to actually do
gossip. Make it no longer possible to test purely an offer with
one node. Add OfferReal call for now until spec potentially gets
adjusted.
Also Add some Node information logging for FindContent and Offer
to be able to better debug failures and interoperability.
Kim De Mey
Jordan Hrycaj
Adam Spitz
jangko
KonradStaniec