* Fix eth/common & web3 related deprecation warnings for fluffy
This commit uses the new types in the new eth/common/ structure
to remove deprecation warnings.
It is however more than just a mass replace as also all places
where eth/common or eth/common/eth_types or eth/common/eth_types_rlp
got imported have been revised and adjusted to a better per submodule
based import.
There are still a bunch of toMDigest deprecation warnings but that
convertor is not needed for fluffy code anymore so in theory it
should not be used (bug?). It seems to still get imported via export
leaks ffrom imported nimbus code I think.
* Address review comments
* Remove two more unused eth/common imports
* fix: rpc can't serve blocks in db
* shift db access to forkedchainref
* cleanup
* kurtosis test fix, should fail + eth_getTransactionReceipt
* remove kurtosis not + cleanup
* alter CI check to pass
* optimize impl
* cleanup
* fix loop case
* Rename `base` -> `coupler`, `B` -> `C`
why:
Glossary: The jargon `base` is used for the `base state` block number
which can be smaller than what is now the `coupler`.
* Rename `global state` -> `base`, `T` -> `B`
why:
See glossary
* Rename `final` -> `end`, `F` -> `E`
why:
See glossary. Previously, `final` denoted some finalised block but not
`the finalised` block from the glossary (which is maximal.)
* Properly name finalised block as such, rename `Z` -> `F`
why:
See glossary
* Rename `least` -> `dangling`, `L` -> `D`
* Metrics update (variables not covered yet)
* Docu update and corrections
* Logger updates
* Remove obsolete `skeleton*Key` kvt columns from `storage_types` module
* Remove `--sync-mode` option from nimbus config
why:
Currently there is only one sync mode available.
* Rename `flare` -> `beacon`, but not base module folder and nim source
why:
The name `flare` was used do designate an alternative `beacon` mode that.
Leaving the base folder and source as-is for a moment, makes it easier
to read change diffs.
* Rename `flare` base module folder and nim source: `flare` -> `beacon`
* Dissolve legacy `sync/types.nim` into `*/eth/eth_types.nim`
* Flare sync: Simplify scheduler and remove `runSingle()` method
why:
`runSingle()` is not used anymore (main purpose was for negotiating
best headers in legacy full sync.)
Also, `runMulti()` was renamed `runPeer()`
* Flare sync: Move `chain` field from `sync_desc` -> `worker_desc`
* Flare sync: Remove handler descriptor lateral reference
why:
Not used anymore. It enabled to turn on/off eth handler activity with
regards to the sync state, i.e.from with in the sync worker.
* Flare sync: Update `Hash256` and other deprecated `std/eth` symbols
* Protocols: Update `Hash256` and other deprecated `std/eth` symbols
* Eth handler: Update `Hash256` and other deprecated `std/eth` symbols
* Update flare TODO
* Remove redundant `sync/type` import
why:
The import module `type` has been removed
* Remove duplicate implementation
This is a minimal set of changes to make things work with the new types
in nim-eth - this is the minimal PR that merely resolves
incompatibilities while the full change set would include more cleanup
and migration.
* Cosmetics, small fixes, add stashed headers verifier
* Remove direct `Era1` support
why:
Era1 is indirectly supported by using the import tool before syncing.
* Clarify database persistent save function.
why:
Function relied on the last saved state block number which was wrong.
It now relies on the tx-level. If it is 0, then data are saved directly.
Otherwise the task that owns the tx will do it.
* Extracted configuration constants into separate file
* Enable single peer mode for debugging
* Fix peer losing issue in multi-mode
details:
Running concurrent download peers was previously programmed as running
a batch downloading and storing ~8k headers and then leaving the `async`
function to be restarted by a scheduler.
This was unfortunate because of occasionally occurring long waiting
times for restart.
While the time gap until restarting were typically observed a few
millisecs, there were always a few outliers which well exceed several
seconds. This seemed to let remote peers run into timeouts.
* Prefix function names `unprocXxx()` and `stagedYyy()` by `headers`
why:
There will be other `unproc` and `staged` modules.
* Remove cruft, update logging
* Fix accounting issue
details:
When staging after fetching headers from the network, there was an off
by 1 error occurring when the result was by one smaller than requested.
Also, a whole range was mis-accounted when a peer was terminating
connection immediately after responding.
* Fix slow/error header accounting when fetching
why:
Originally set for detecting slow headers in a row, the counter
was wrongly extended to general errors.
* Ban peers for a while that respond with too few headers continuously
why:
Some peers only returned one header at a time. If these peers sit on a
farm, they might collectively slow down the download process.
* Update RPC beacon header updater
why:
Old function hook has slightly changed its meaning since it was used
for snap sync. Also, the old hook is used by other functions already.
* Limit number of peers or set to single peer mode
details:
Merge several concepts, single peer mode being one of it.
* Some code clean up, fixings for removing of compiler warnings
* De-noise header fetch related sources
why:
Header download looks relatively stable, so general debugging is not
needed, anymore. This is the equivalent of removing the scaffold from
the part of the building where work has completed.
* More clean up and code prettification for headers stuff
* Implement body fetch and block import
details:
Available headers are used stage blocks by combining existing headers
with newly fetched blocks. Then these blocks are imported/executed via
`persistBlocks()`.
* Logger cosmetics and cleanup
* Remove staged block queue debugging
details:
Feature still available, just not executed anymore
* Docu, logging update
* Update/simplify `runDaemon()`
* Re-calibrate block body requests and soft config for import blocks batch
why:
* For fetching, larger fetch requests are mostly truncated anyway on
MainNet.
* For executing, smaller batch sizes reduce the memory needed for the
price of longer execution times.
* Update metrics counters
* Docu update
* Some fixes, formatting updates, etc.
* Update `borrowed` type: uint -. uint64
also:
Always convert to `uint64` rather than `uint` where appropriate
* ForkedChainRef.forkchoice: Skip newBase calculation and skip chain finalization if finalizedHash is zero
* Fix ForkedChainRef.forkChoice: do nothing if headHash is the same with cursorHash
* Fix stupid bug in engine API FCU when calling ForkedChainRef.forkChoice
* Wire RPC server API to nimbus RPC manager
* Add test case
* Use default(Hash256) in ForkedChainRef
* init style for Hash256
https://github.com/status-im/nim-eth/pull/733 updates `Hash256` to
become an array instead of an object - unfortunately, nim does not allow
constructing arrays with `name()`, so this PR changes it to `default`
which works with both.
* lint
* Fix multiple instances running from same dataDir
* Add exclusive lock on lock file
* Unlock lock file on process exit
* Fix minor issues in lock file implementation
The revalidateMax value is lowered to have a quicker ramp up of
the radiusCache + to keep it healthier.
The defaultMaxGossipNodes value is lowered because with the
current value a Nodes lookup is triggered almost always.
This value is dependant on the content replication value. This
is dependant on the network (and subnetwork) because of the amount
of nodes and their radius/storage capacity.
* Support RPC API namespaces as cli parameter.
* Fluffy now uses rpcFlags on startup.
* Update testnet script to enable all RPC APIs.
* Update Fluffy book and move web3 call into eth calls.
This bug would have as effect that our radius cache would not get
filled by any outgoing pings, causing:
- Node lookups to always be occurring on NH gossip
- POKEs to much more rarely
Also add metrics for the amount of offers done via POKE mechanism.
* fix: nimbus state ahead of era history
* comments
* fix: suggestions
* fix: messages
* fix edge case resume
* check from last file
* formatting
* fix: typo
* fix: unwanted quit before rlp import
* Make stop functions wait for completion before return.
* Implement graceful shutdown.
* Shutdown rpc and metric servers if enabled.
* Move metrics and rpc servers out of PortalNode.
Kim De Mey
Jordan Hrycaj
Jacek Sieka
Advaita Saha
bhartnett
tersec
andri lim
Bhaskar Metiya
web3-developer