The idea of the beacon-lc-bridge was to allow to bridge data into
the Portal network while only using p2p protocols to get access
to the data.
It is however incomplete as for history content the receipts are
missing. These could be added by also adding devp2p access.
But for the beacon content, there would be no way for getting the
historical summaries over p2p.
And then we did not even look yet on how to do this for state.
Considering it is incomplete it was also not being used by anyone
and thus we remove it.
* rename nimbus binary to nimbus_execution_client
* additional replacements
* makefile and dockerfile
* fix ci building errors
* github workflows
* improved Makefile target
---------
Co-authored-by: Pedro Miranda <pedro.miranda@nimbus.team>
- Add new content + content key functionality for header by number
- Remove EpochRecords from the network
- Add pruning call for the EpochRecords + required deprecated
functionality
- Adjust getBlock and getBlockHashByNumber to make use of the
new functionality instead
- Delete content_verifier as it was only verifying the now
deprecated EpochRecord
* Remove redundant `eth/68` message and clean up docu
details:
There is only eth/68 available at the moment
* Allow to turn on chronicles line number logging in `Makefile`
* Accept (and forget) tx hashes announcements
why:
Does no harm to just ignore it at the moment
* Bump nim-eth (rlp fix)
* Started state bridge.
* Implement call to fetch stateDiffs using trace_replayBlockTransactions.
* Convert JSON responses to stateDiff types.
* State updates working for first few blocks.
* Correctly building state for first 200K blocks.
* Add storage of code and cleanup.
* Start state bridge refactor.
* More cleanup and fixes.
* Use RocksDb as backend for state.
* Implement transactions.
* Build RocksDb dependency when building fluffy tools.
* Move code to world state helper.
* Implement producer and consumer queue.
* Cleanup exceptions.
* Improve logging.
* Add update caches to DatabaseRef backends.
* Bump nim-eth, nim-web3, nimbus-eth2
- Replace std.Option with results.Opt
- Fields name changes
* More fixes
* Fix Portal stream async raises and portal testnet Opt usage
* Bump eth + nimbus-eth2 + more fixes related to eth_types changes
* Fix in utp test app and nimbus-eth2 bump
* Fix test_blockchain_json rebase conflict
* Fix EVMC block_timestamp conversion plus commentary
---------
Co-authored-by: kdeme <kim.demey@gmail.com>
The `rocksdb` version shipped with distributions is typically old and
therefore often lacks features we use - it also doesn't match the one
assumed by nim-rocksdb leading to ABI mismatch risks.
Instead of depending on the system rocksdb, we'll now use the rocksdb
version assumed by nim-rocksdb and locked in its vendor folder by always
building it together with nimbus.
This avoids the problem of unknown rocksdb versions at a (small) cost to
build time.
CI caching and full windows support for building from source [remains
TODO](https://github.com/status-im/nim-rocksdb/issues/44).
* Suspend `snap` sync tests
why:
Snap needs to be updated. While this is not done, tests are obsolete
and eat up memory resources only
* Suspend rocks DB timing tests
why:
Currently of no use for general test suite.
* Mothballed unused evm code for opportunistic DB handling
why:
Needs to be refactored anyway. Uses hard coded protocol dependencies.
* Update `eth` protocol configuration
why:
+ new upcoming version `eth68`
+ prepare for eth-multi protocol stack support
* Strip the `legacy_` prefix from eth66 compiler flag variable
why:
Being it is an oddity having `eth67_enabled`, `eth68_enabled`, and
`legacy_eth_66_enabled`.
* Providing eth68 stubs
* Fix copyright year
* Fix eth68 stub method name
* Static link rocksdb into Nimbus.
* Link in additional compression libraries.
* Support static linking for MacOS.
* Add flag to support disabling rocksdb static linking.
* Static linking is disabled by default. Build nimbus with static linking using: make nimbus_rocksdb_static
* Update nim-rocksdb to latest.
- The fluffy test vector repo got forked (well, copied rather) to
become the official one under ethereum github org, so we change
to that repo now and archive ours.
- Our repo also stored accumulator / historical_roots, replace
that with a new repo which is only for network configs.
- Several changes needed to be made due to test vectors that got
updated + some of them got changed to / are yaml format instead of
json.
* Add premix persist tool to Makefile to build as separate binary.
* Fix rootBytes.len > 0 assertion defect in HexaryTrie by adding call to com.db.compensateLegacySetup().
* Run hardForkTransition before executing transactions in getBlockWitness.
* Improve logging and add help message.
* Retry requests for block data.
* Nimbus light client integration with status-go
* Add cleanup code, address review comments
* Disable metrics for libverifproxy only
* Update confutils
* missing import
* build proxy in tests
* more build stuff
* namespace make vars
* export NimMain for windows
* reduce dependency on Nim compiler in header file
* copyright
---------
Co-authored-by: Vitaliy Vlasov <siphiuel@protonmail.com>
Co-authored-by: Jacek Sieka <jacek@status.im>
* Launch Fluffy builds directly from make to avoid compile issue
Without this change, builds on latest macos fails when ulimit is
not set to 1024. But it will still cause libbacktrace error to occur
when launching the binaries so it would be still advised to
set it to 1024.
* Fix fluffy local testnet for some macOS systems
And some additional improvements to the script + run the fluffy
nodes at INFO log-level to speed-up the testing time.
* Split up fluffy tests in separate targets
This way the two test binaries can be build and ran
concurrently.
* Build Fluffy tools individually through Makefile
Before the builds were launched sequentually from a nimble task,
this would not allow for concurrent builds of the individual tools
* Some Makefile / nimble clean-up
* Recreating some of the speculative-execution code.
Not really using it yet. Also there's some new inefficiency in
memory.nim, but it's fixable - just haven't gotten around to it yet.
The big thing introduced here is the idea of "cells" for stack,
memory, and storage values. A cell is basically just a Future (though
there's also the option of making it an Identity - just a simple
distinct wrapper around a value - if you want to turn off the
asynchrony).
* Bumped nim-eth.
* Cleaned up a few comments.
* Bumped nim-secp256k1.
* Oops.
* Fixing a few compiler errors that show up with EVMC enabled.
* Enable `snap/1` accounts range service
* Allow to change the garbage collector to `boehm` as a Makefile option.
why:
There is still an unsolved memory corruption problem that might be
related to the standard `gc`. It seemingly goes away if the `gc` is
changed to `boehm`.
Specifying another `gc` on the make level simplifies debugging and
development.
* Code cosmetics
details:
* updated exception annotations
* extracted `worker_desc.nim` from `full/worker.nim`
* etc.
* Implement option to state a sync modifier file
why:
This allows to specify extra sync type specific options which might
change over time. This file is regularly checked for updates.
* Implement a threshold when to suspend full syncing
why:
For a test scenario, a full sync beep may work as a local snap server.
There is no need to download the full block chain.
details:
The file containing the pivot specs is specified by the
`--sync-ctrl-file` option. It is regularly parsed for updates.
* Change Light client proxy naming to verified proxy naming in code
* Rename the lc_proxy files to the verified proxy naming
* Update to the verified proxy name in the docs
* Added basic async capabilities for vm2.
This is a whole new Git branch, not the same one as last time
(https://github.com/status-im/nimbus-eth1/pull/1250) - there wasn't
much worth salvaging. Main differences:
I didn't do the "each opcode has to specify an async handler" junk
that I put in last time. Instead, in oph_memory.nim you can see
sloadOp calling asyncChainTo and passing in an async operation.
That async operation is then run by the execCallOrCreate (or
asyncExecCallOrCreate) code in interpreter_dispatch.nim.
In the test code, the (previously existing) macro called "assembler"
now allows you to add a section called "initialStorage", specifying
fake data to be used by the EVM computation run by that test. (In
the long run we'll obviously want to write tests that for-real use
the JSON-RPC API to asynchronously fetch data; for now, this was
just an expedient way to write a basic unit test that exercises the
async-EVM code pathway.)
There's also a new macro called "concurrentAssemblers" that allows
you to write a test that runs multiple assemblers concurrently (and
then waits for them all to finish). There's one example test using
this, in test_op_memory_lazy.nim, though you can't actually see it
doing so unless you uncomment some echo statements in
async_operations.nim (in which case you can see the two concurrently
running EVM computations each printing out what they're doing, and
you'll see that they interleave).
A question: is it possible to make EVMC work asynchronously? (For
now, this code compiles and "make test" passes even if ENABLE_EVMC
is turned on, but it doesn't actually work asynchronously, it just
falls back on doing the usual synchronous EVMC thing. See
FIXME-asyncAndEvmc.)
* Moved the AsyncOperationFactory to the BaseVMState object.
* Made the AsyncOperationFactory into a table of fn pointers.
Also ditched the plain-data Vm2AsyncOperation type; it wasn't
really serving much purpose. Instead, the pendingAsyncOperation
field directly contains the Future.
* Removed the hasStorage idea.
It's not the right solution to the "how do we know whether we
still need to fetch the storage value or not?" problem. I
haven't implemented the right solution yet, but at least
we're better off not putting in a wrong one.
* Added/modified/removed some comments.
(Based on feedback on the PR.)
* Removed the waitFor from execCallOrCreate.
There was some back-and-forth in the PR regarding whether nested
waitFor calls are acceptable:
https://github.com/status-im/nimbus-eth1/pull/1260#discussion_r998587449
The eventual decision was to just change the waitFor to a doAssert
(since we probably won't want this extra functionality when running
synchronously anyway) to make sure that the Future is already
finished.
Kim De Mey
andri lim
Jacek Sieka
Pedro Miranda
Jordan Hrycaj
Advaita Saha
Kim De Mey
tersec
web3-developer
Vit∀ly Vlasov
Daniel Sobol
Adam Spitz
KonradStaniec
Adam Spitz