* implement a logging proxy
The logging proxy:
- prevents the need to import chronicles (as well as export except toJson),
- prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization,
- and handles json formatting correctly in chronicles json sinks
* Rename logging -> logutils to avoid ambiguity with common names
* clean up
* add setProperty for JsonRecord, remove nim-json-serialization conflict
* Allow specifying textlines and json format separately
Not specifying a LogFormat will apply the formatting to both textlines and json sinks.
Specifying a LogFormat will apply the formatting to only that sink.
* remove unneeded usages of std/json
We only need to import utils/json instead of std/json
* move serialization from rest/json to utils/json so it can be shared
* fix NoColors ambiguity
Was causing unit tests to fail on Windows.
* Remove nre usage to fix Windows error
Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :)
* Add logutils module doc
* Shorten logutils.formatIt for `NBytes`
Both json and textlines formatIt were not needed, and could be combined into one formatIt
* remove debug integration test config
debug output and logformat of json for integration test logs
* Use ## module doc to support docgen
* Workaround for Hardhat timestamp bug
Likely due to a Hardhat bug in which the callbacks for subscription events are called and awaited before updating its local understanding of the last block time, Hardhat will report a block time in the `newHeads` event that is generally 1 second before the time reported from `getLatestBlock.timestamp`. This was causing issues with the OnChainClock's offset and therefore the `now()` used by the `OnChainClock` would sometimes be off by a second (or more), causing tests to fail.
This commit introduce a `codex_use_hardhat` compilation flag, that when set, will always get the latest block timestamp from Hardhat via the `getLatestBlock.timestamp` RPC call for `OnChainClock.now` calls. Otherwise, the last block timestamp reported in the `newHeads` event will be used.
Update the docker dist tests compilation flag for simulated proof failures (it was not correct), and explicitly add the `codex_use_hardhat=false` for clarity.
* enable simulated proof failures for coverage
* comment out failing test on linux -- will be replaced
* bump codex contracts eth
* add back clock offset for non-hardhat cases
* bump codex-contracts-eth
increases pointer by 67 blocks each period increase
* Add `codex_use_hardhat` flag to coverage tests
* [docs] fix two client scenario: add missing collateral
* [integration] separate step to wait for node to be started
* [cli] add option to specify ethereum private key
* Remove unused imports
* Fix warnings
* [integration] move type definitions to correct place
* [integration] wait a bit longer for a node to start in debug mode
When e.g. running against Taiko test net rpc, the node start
takes longer
* [integration] simplify handling of codex node and client
* [integration] add Taiko integration test
* [contracts] await token approval confirmation before next tx
* [contracts] deployment address of marketplace on Taiko
* [cli] --eth-private-key now takes a file name
Instead of supplying the private key on the command line,
expect the private key to be in a file with the correct
permissions.
* [utils] Fixes undeclared `activeChroniclesStream` on Windows
* [build] update nim-ethers to include PR #52
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [cli] Better error messages when reading eth private key
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [integration] simplify reading of cmd line arguments
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* [build] update to latest version of nim-ethers
* [contracts] updated contract address for Taiko L2
* [build] update codex contracts to latest version
---------
Co-authored-by: Eric Mastro <eric.mastro@gmail.com>
* extra utilities and tweaks
* add atlas lock
* update ignores
* break build into it's own script
* update url rules
* base off codexdht's
* compile fixes for Nim 1.6.14
* update submodules
* convert mapFailure to procs to work around type resolution issues
* add toml parser for multiaddress
* change error type on keyutils
* bump nimbus build to use 1.6.14
* update gitignore
* adding new deps submodules
* bump nim ci version
* even more fixes
* more libp2p changes
* update keys
* fix eventually function
* adding coverage test file
* move coverage to build.nims
* use nimcache/coverage
* move libp2p import for tests into helper.nim
* remove named bin
* bug fixes for networkpeers (from Dmitriy)
---------
Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com>
Goal is to provide documentation and to enable conf utils byte params.
* Create byte units NByte and plumb through in size locations.
* add json serde
* plumb parseDuration to conf
* Support for building docker images with local modifications for the purpose of testing and debugging
* exposes peer information via debug/info
* api-names slightly kinder to json serializers
* Moves debug image-building
* fixes misalignment of debug peer info array
* Changes switchPeers source from KeyBook to AddressBook (filed ticket in libp2p, discussed with Tanguy)
* Limited success with dist-test peer discovery tests
* Removes unnecessary random-timer
* bumps dht repo. Adds peerId to formatNode
* Removes unused prints
* bumps libp2p-dht
* Exposes node address on debug api
* Adds traces
* review comments by me
* Hides debug/peers api behind compile flag
* Waiting for nim-libp2p-dht PR merge
* bumps libp2p-dht back to main after PRs were merged there.
* Cleanup
* [contracts] Add SlotFreed event
* [integration] allow test node to be stopped twice
* [cli] add --validator option
* [contracts] remove dead code
* [contracts] instantiate OnChainMarket and OnChainClock only once
* [contracts] add Validation
* [sales] remove duplicate import
* [market] add missing import
* [market] subscribe to all SlotFilled events
* [market] add freeSlot()
* [sales] fix warnings
* [market] subscribe to SlotFreed events
* [contracts] fix warning
* [validator] keep track of filled slots
* [validation] remove slots that have ended
* [proving] absorb Proofs into Market
Both Proofs and Market are abstractions around
the Marketplace contract, having them separately
is more trouble than it's worth at the moment.
* [market] add markProofAsMissing()
* [clock] speed up waiting for clock in tests
* [validator] mark proofs as missing
* [timer] fix error on node shutdown
* [cli] handle --persistence and --validator separately
* [market] allow retrieval of proof timeout value
* [validator] do not subscribe to SlotFreed events
Freed slots are already handled in
removeSlotsThatHaveEnded(), and onSlotsFreed()
interfered with its iterator.
* [validator] Start validation at the start of a new period
To decrease the likelihood that we hit the validation timeout.
* [validator] do not mark proofs as missing after timeout
* [market] check whether proof can be marked as missing
* [validator] simplify validation
Simulate a transaction to mark proof as missing, instead
of trying to keep track of all the conditions that may
lead to a proof being marked as missing.
* [build] use nim-ethers PR #40
Uses "pending" blocktag instead of "latest" blocktag
for better simulation of transactions before sending
them.
https://github.com/status-im/nim-ethers/pull/40
* [integration] integration test for validator
* [validator] monitor a maximum number of slots
Adds cli parameter --validator-max-slots.
* [market] fix missing collateral argument
After rebasing, add the new argument to fillSlot calls.
* [build] update to nim-ethers 0.2.5
* [validator] use Set instead of Table to keep track of slots
* [validator] add logging
* [validator] add test for slot failure
* [market] use "pending" blocktag to use more up to date block time
* [contracts] remove unused import
* [validator] fix: wait until after period ends
The smart contract checks that 'end < block.timestamp',
so we need to wait until the block timestamp is greater
than the period end.
* [build] disable XCannotRaiseY hint
There are too many {.raises:[Defect].} in the
libraries that we use, drowning out all other
warnings and hints
* [build] disable BareExcept warning
Not yet enabled in a released version of Nim,
so libraries that we depend on have not fixed
this yet, drowning out our own hints and warnings
* [build] disable DotLikeOps warning
dot-like ops were an experiment that is not going
land in Nim
* [build] compile log statements in tests
When running tests, all log statements are compiled.
They are filtered out at runtime during a test run.
* [build] do not build executable when running unit test
It's already built in the integration test
* [build] Fix warnings
- remove unused code
- remove unused imports
- stop using deprecated stuff
* [build] Put compiler flags behind nim version checks
* [CI] remove Nim 1.2 compatibility
* setting up
* Implements timer utility
* applies async and cancellation to timer loop
* Sets up mocktimer and mockblockstore to set up first maintenance module test
* wip: first test that calls blockChecker
* wip: adding user type to timer callback
* Chronicles doesn't like type-arguments? Disables logging in timer module for now
* Implementing block check test for blockMaintainer module
* Sets up additional tests for blockmaintainer
* Removes generic from timer module. Implements numberOfBlocks per interval in blockMaintainer.
* Implements blockMaintainer
* Sets up tests for blockChecker
* Some comments by Mark
* Cleanup repostore tests
* Setting up the use of std/times for block TTL tracking
* repostore adds expiration timestamp
* Defaults the repostore clock to the system clock
* Applies updates to repostore interface.
* Implements retrieving of block expiration information from repostore
* Sets up tests for maintenance module behavior
* Implements block maintenance module
* Wires maintenance module into codex. Sets up integration tests for block expiration
* Sets up test for missing behavior: removing timestamp metadata on block delete
* Implements removing of expiration metadata in repoStore
* Fixes integration tests for block expiration
* Adds block expiration tests to integration test run
* Handled some comments by Dmitriy
* Review comment by Dmitriy: Removes seq[cid] from runBlockCheck
* Review comment by Dmitriy: Moves key formatting methods to keyutils.
* Review comment by Dmitriy: Encodes durations using chronos
* Fixes conversion of TTL type in conf.
* Review comments by Dmitriy
* Adds unit tests for keyUtils.
* Adds test coverage for exception in maintenance module
* Sets up working dockerized build and codex docker image creation
* Making codex configurable from the docker environment
* Sets up two networks with three codex nodes
* enables and exposes metrics endpoint for first node
* Manually performed two-client test scenario with docker containers
* Sets up docker-ignore and docker github workflow
* Wires up all codex CLI arguments to docker env vars
* Makes API_PORT variable optional as well
* Removes duplicate docker-login step
* Fixes path to docker file
* Switches target dockerhub for debugging
* Adds git tag info to --version output
* Exposes version information via debug endpoint
* Debugging docker image
* specifies target platforms for docker build
* specifies platform for QEMU and buildx steps
* Attempt to debug line endings
* Disables march-native in config.nims as test
* Applies make argument to disable architecture optimization during docker build
* Removes subset version tags from docker build
* Restore multi-arch build
* Removes docker-build test branch from CI branches
* initial implementation of repo store
* allow isManifest on multicodec
* rework with new blockstore
* add raw codec
* rework listBlocks
* remove fsstore
* reworking with repostore
* bump datastore
* fix listBlocks iterator
* adding store's common tests
* run common store tests
* remove fsstore backend tests
* bump datastore
* add `listBlocks` tests
* listBlocks filter based on block type
* disabling tests in need of rewriting
* allow passing block type
* move BlockNotFoundError definition
* fix tests
* increase default advertise loop sleep to 10 mins
* use `self`
* add cache quota functionality
* pass meta store and start repo
* add `CacheQuotaNamespace`
* pass meta store
* bump datastore to latest master
* don't use os `/` as key separator
* Added quota limits support
* tests for quota limits
* add block expiration key
* remove unnesesary space
* use idleAsync in listBlocks
* proper test name
* re-add contrlC try/except
* add storage quota and block ttl config options
* clarify comments
* change expires key format
* check for block presence before storing
* bump datastore
* use dht with fixed datastore `has`
* bump datastore to latest master
* bump dht to latest master
* setup and persist private key
* return dht record spr
* helper to remap multiaddr ip and port
* set/update discovery and announce addrs
* add nat and discovery IPs
* allow for announce and DHT addresses separatelly
* update tests
* check for nat or discoveryIp
* fix integration tests
* misc align
* don't share data dirs and and set bootstrap node
* add log scope
* remap announceAddrs after node start
* simplify discovery initialization
* make nat and disc-ip required
* add log scope don't init dht spr in constructor
* bump dht
* dissallow `0.0.0.0` for `--nat`
* [contracts] ContractInteractions.new() now requires account parameter
* [cli] Only perform Ethereum interactions when --eth-account is specified
* [cli] Add --persistence option that is disabled by default
* [cli] Use Option for ethDeployment parameter
* [node] Better error reporting when Ethereum node cannot be reached
Dmitriy Ryajov
Eric
Ben Bierens
markspanbroek
Adam Uhlíř
Jaremy Creechley
Eric Mastro
c-blake
Michael Bradley