nim-codex/codex/conf.nim

678 lines
20 KiB
Nim
Raw Normal View History

2022-05-19 19:56:03 +00:00
## Nim-Codex
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
## Copyright (c) 2021 Status Research & Development GmbH
## Licensed under either of
## * Apache License, version 2.0, ([LICENSE-APACHE](LICENSE-APACHE))
## * MIT license ([LICENSE-MIT](LICENSE-MIT))
## at your option.
## This file may not be copied, modified, or distributed except according to
## those terms.
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
{.push raises: [].}
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
import std/os
2022-04-12 13:21:07 +00:00
import std/terminal
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
import std/options
import std/strutils
2022-04-12 13:21:07 +00:00
import std/typetraits
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
import pkg/chronos
import pkg/chronicles/helpers
2022-04-12 13:21:07 +00:00
import pkg/chronicles/topics_registry
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
import pkg/confutils/defs
import pkg/confutils/std/net
import pkg/toml_serialization
import pkg/metrics
import pkg/metrics/chronos_httpserver
import pkg/stew/shims/net as stewnet
import pkg/stew/shims/parseutils
import pkg/stew/byteutils
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
import pkg/libp2p
import pkg/ethers
import pkg/questionable
import pkg/questionable/results
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
import ./codextypes
import ./discovery
feat: create logging proxy (#663) * implement a logging proxy The logging proxy: - prevents the need to import chronicles (as well as export except toJson), - prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization, - and handles json formatting correctly in chronicles json sinks * Rename logging -> logutils to avoid ambiguity with common names * clean up * add setProperty for JsonRecord, remove nim-json-serialization conflict * Allow specifying textlines and json format separately Not specifying a LogFormat will apply the formatting to both textlines and json sinks. Specifying a LogFormat will apply the formatting to only that sink. * remove unneeded usages of std/json We only need to import utils/json instead of std/json * move serialization from rest/json to utils/json so it can be shared * fix NoColors ambiguity Was causing unit tests to fail on Windows. * Remove nre usage to fix Windows error Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :) * Add logutils module doc * Shorten logutils.formatIt for `NBytes` Both json and textlines formatIt were not needed, and could be combined into one formatIt * remove debug integration test config debug output and logformat of json for integration test logs * Use ## module doc to support docgen * bump nim-poseidon2 to export fromBytes Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening. * fixes to get compiling after rebasing master * Add support for Result types being logged using formatIt
2024-01-23 07:35:03 +00:00
import ./logutils
import ./stores
import ./units
import ./utils
2024-12-18 09:30:48 +00:00
import ./nat
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
from ./validationconfig import MaxSlots, ValidationGroups
2024-12-18 09:30:48 +00:00
export units, net, codextypes, logutils,completeCmdArg,parseCmdArg,NatConfig
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
export ValidationGroups, MaxSlots
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
Rework merkle tree (#654) * rework merkle tree support * deps * rename merkletree -> codexmerkletree * treed and proof encoding/decoding * small change to invoke proof verification * rename merkletree to codexmerkletree * style * adding codex merkle and coders tests * fixup imports * remove new codecs for now * bump deps * adding trace statement * properly serde of manifest block codecs * use default hash codec * add more trace logging to aid debugging * misc * remove double import * revert un-needded change * proof size changed * bump poseidon2 * add from nodes test * shorte file names * remove upraises * wip poseidon tree * adjust file names * misc * shorten file names * fix bad `elements` iter * don't do asserts * add fromNodes and converters * root and getProof now return result * add poseidon2 tree tests * root now returns result * misc * had to make merkletree a ref, because nim blows up otherwise * root returns a result * root returns a result * import poseidon tests * bump * merkle poseidon2 digest * misc * add merkle digest tests * bump * don't use checksuite * Update tests/codex/merkletree/generictreetests.nim Co-authored-by: markspanbroek <mark@spanbroek.net> Signed-off-by: Dmitriy Ryajov <dryajov@gmail.com> * Update codex/merkletree/merkletree.nim Co-authored-by: markspanbroek <mark@spanbroek.net> Signed-off-by: Dmitriy Ryajov <dryajov@gmail.com> * Update codex/merkletree/merkletree.nim Co-authored-by: markspanbroek <mark@spanbroek.net> Signed-off-by: Dmitriy Ryajov <dryajov@gmail.com> * Update tests/codex/merkletree/generictreetests.nim Co-authored-by: markspanbroek <mark@spanbroek.net> Signed-off-by: Dmitriy Ryajov <dryajov@gmail.com> * missing return * make toBool private (it's still needed otherwise comparison won't work) * added `digestTree` that returns a tree and `digest` for root * test against both poseidon trees - codex and poseidon2 * shorten merkle tree names * don't compare trees - it's going to be too slow * move comparison to mekrle helper * remove merkle utils --------- Signed-off-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: markspanbroek <mark@spanbroek.net>
2023-12-21 06:41:43 +00:00
export
DefaultQuotaBytes,
DefaultBlockTtl,
DefaultBlockMaintenanceInterval,
DefaultNumberOfBlocksToMaintainPerInterval
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
proc defaultDataDir*(): string =
let dataDir = when defined(windows):
"AppData" / "Roaming" / "Codex"
elif defined(macosx):
"Library" / "Application Support" / "Codex"
else:
".cache" / "codex"
getHomeDir() / dataDir
const
codex_enable_api_debug_peers* {.booldefine.} = false
codex_enable_proof_failures* {.booldefine.} = false
codex_enable_log_counter* {.booldefine.} = false
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
DefaultDataDir* = defaultDataDir()
Rework circuit downloader (#882) * Introduces a start method to prover * Moves backend creation into start method * sets up three paths for backend initialization * Extracts backend initialization to backend-factory * Implements loading backend from cli files or previously downloaded local files * Wires up downloading and unzipping * functional implementation * Fixes testprover.nim * Sets up tests for backendfactory * includes libzip-dev * pulls in updated contracts * removes integration cli tests for r1cs, wasm, and zkey file arguments. * Fixes issue where inner-scope values are lost before returning * sets local proof verification for dist-test images * Adds two traces and bumps nim-ethers * Adds separate path for circuit files * Create circuit dir if not exists * fix: make sure requestStorage is mined * fix: correct place to plug confirm * test: fixing contracts tests * Restores gitmodules * restores nim-datastore reference * Sets up downloader exe * sets up tool skeleton * implements getting of circuit hash * Implements downloader tool * sets up test skeleton * Implements test for cirdl * includes testTools in testAll * Cleanup building.md * cleans up previous downloader implementation * cleans up testbackendfactory * moves start of prover into node.nim * Fills in arguments in example command * Initializes backend in prover constructor * Restores tests * Restores tests for cli instructions * Review comments by Dmitriy, part 1 * Quotes path in download instruction. * replaces curl with chronos http session * Moves cirdl build output to 'build' folder. * Fixes chronicles log output * Add cirdl support to the codex Dockerfile Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the docker entrypoint Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the release workflow Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Disable verify_circuit flag for releases Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Removes backendFactory placeholder type * wip * Replaces zip library with status-im/zippy library (which supports zip and tar) * Updates cirdl to not change circuitdir folder * Switches from zip to tar.gz * Review comments by Dmitriy * updates codex-contracts-eth * Adds testTools to CI * Adds check for access to config.circuitdir * Update fixture circuit zkey * Update matrix to run tools tests on Windows * Adds 'deps' dependency for cirdl * Adjust docker-entrypoint.sh to use CODEX_CIRCUIT_DIR env var * Review comments by Giuliano --------- Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> Co-authored-by: Adam Uhlíř <adam@uhlir.dev> Co-authored-by: Veaceslav Doina <20563034+veaceslavdoina@users.noreply.github.com>
2024-09-23 14:37:17 +00:00
DefaultCircuitDir* = defaultDataDir() / "circuits"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
type
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
StartUpCmd* {.pure.} = enum
noCmd
persistence
PersistenceCmd* {.pure.} = enum
noCmd
prover
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
feat: create logging proxy (#663) * implement a logging proxy The logging proxy: - prevents the need to import chronicles (as well as export except toJson), - prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization, - and handles json formatting correctly in chronicles json sinks * Rename logging -> logutils to avoid ambiguity with common names * clean up * add setProperty for JsonRecord, remove nim-json-serialization conflict * Allow specifying textlines and json format separately Not specifying a LogFormat will apply the formatting to both textlines and json sinks. Specifying a LogFormat will apply the formatting to only that sink. * remove unneeded usages of std/json We only need to import utils/json instead of std/json * move serialization from rest/json to utils/json so it can be shared * fix NoColors ambiguity Was causing unit tests to fail on Windows. * Remove nre usage to fix Windows error Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :) * Add logutils module doc * Shorten logutils.formatIt for `NBytes` Both json and textlines formatIt were not needed, and could be combined into one formatIt * remove debug integration test config debug output and logformat of json for integration test logs * Use ## module doc to support docgen * bump nim-poseidon2 to export fromBytes Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening. * fixes to get compiling after rebasing master * Add support for Result types being logged using formatIt
2024-01-23 07:35:03 +00:00
LogKind* {.pure.} = enum
2022-04-12 13:21:07 +00:00
Auto = "auto"
Colors = "colors"
NoColors = "nocolors"
Json = "json"
None = "none"
RepoKind* = enum
repoFS = "fs"
repoSQLite = "sqlite"
repoLevelDb = "leveldb"
2022-05-19 19:56:03 +00:00
CodexConf* = object
configFile* {.
desc: "Loads the configuration from a TOML file"
defaultValueDesc: "none"
defaultValue: InputFile.none
name: "config-file" }: Option[InputFile]
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
logLevel* {.
defaultValue: "info"
2022-04-12 13:21:07 +00:00
desc: "Sets the log level",
name: "log-level" }: string
2022-04-12 13:21:07 +00:00
logFormat* {.
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
desc: "Specifies what kind of logs should be written to stdout (auto, " &
"colors, nocolors, json)"
2022-04-12 13:21:07 +00:00
defaultValueDesc: "auto"
defaultValue: LogKind.Auto
name: "log-format" }: LogKind
metricsEnabled* {.
desc: "Enable the metrics server"
defaultValue: false
name: "metrics" }: bool
metricsAddress* {.
desc: "Listening address of the metrics server"
defaultValue: ValidIpAddress.init("127.0.0.1")
defaultValueDesc: "127.0.0.1"
name: "metrics-address" }: ValidIpAddress
metricsPort* {.
desc: "Listening HTTP port of the metrics server"
defaultValue: 8008
name: "metrics-port" }: Port
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
dataDir* {.
2024-01-29 19:31:29 +00:00
desc: "The directory where codex will store configuration and data"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValue: DefaultDataDir
defaultValueDesc: $DefaultDataDir
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
abbr: "d"
name: "data-dir" }: OutDir
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
listenAddrs* {.
desc: "Multi Addresses to listen on"
defaultValue: @[
MultiAddress.init("/ip4/0.0.0.0/tcp/0")
.expect("Should init multiaddress")]
defaultValueDesc: "/ip4/0.0.0.0/tcp/0"
abbr: "i"
name: "listen-addrs" }: seq[MultiAddress]
# TODO: change this once we integrate nat support
2024-12-18 09:30:48 +00:00
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
nat* {.
2024-12-18 09:30:48 +00:00
desc: "Specify method to use for determining public address. " &
"Must be one of: any, none, upnp, pmp, extip:<IP>"
defaultValue: NatConfig(hasExtIp: false, nat: NatAny)
defaultValueDesc: "any"
name: "nat" }: NatConfig
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
discoveryPort* {.
desc: "Discovery (UDP) port"
defaultValue: 8090.Port
defaultValueDesc: "8090"
abbr: "u"
name: "disc-port" }: Port
netPrivKeyFile* {.
desc: "Source of network (secp256k1) private key file path or name"
defaultValue: "key"
name: "net-privkey" }: string
bootstrapNodes* {.
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
desc: "Specifies one or more bootstrap nodes to use when " &
"connecting to the network"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
abbr: "b"
name: "bootstrap-node" }: seq[SignedPeerRecord]
maxPeers* {.
desc: "The maximum number of peers to connect to"
defaultValue: 160
name: "max-peers" }: int
agentString* {.
defaultValue: "Codex"
desc: "Node agent string which is used as identifier in network"
name: "agent-string" }: string
apiBindAddress* {.
desc: "The REST API bind address"
defaultValue: "127.0.0.1"
name: "api-bindaddr"
}: string
apiPort* {.
desc: "The REST Api port",
defaultValue: 8080.Port
defaultValueDesc: "8080"
name: "api-port"
abbr: "p" }: Port
apiCorsAllowedOrigin* {.
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
desc: "The REST Api CORS allowed origin for downloading data. " &
"'*' will allow all origins, '' will allow none.",
defaultValue: string.none
defaultValueDesc: "Disallow all cross origin requests to download data"
name: "api-cors-origin" }: Option[string]
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
repoKind* {.
desc: "Backend for main repo store (fs, sqlite, leveldb)"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValueDesc: "fs"
defaultValue: repoFS
name: "repo-kind" }: RepoKind
storageQuota* {.
desc: "The size of the total storage quota dedicated to the node"
defaultValue: DefaultQuotaBytes
defaultValueDesc: $DefaultQuotaBytes
name: "storage-quota"
abbr: "q" }: NBytes
blockTtl* {.
desc: "Default block timeout in seconds - 0 disables the ttl"
defaultValue: DefaultBlockTtl
defaultValueDesc: $DefaultBlockTtl
name: "block-ttl"
abbr: "t" }: Duration
blockMaintenanceInterval* {.
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
desc: "Time interval in seconds - determines frequency of block " &
"maintenance cycle: how often blocks are checked " &
"for expiration and cleanup"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValue: DefaultBlockMaintenanceInterval
defaultValueDesc: $DefaultBlockMaintenanceInterval
name: "block-mi" }: Duration
blockMaintenanceNumberOfBlocks* {.
desc: "Number of blocks to check every maintenance cycle"
defaultValue: DefaultNumberOfBlocksToMaintainPerInterval
defaultValueDesc: $DefaultNumberOfBlocksToMaintainPerInterval
name: "block-mn" }: int
cacheSize* {.
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
desc: "The size of the block cache, 0 disables the cache - " &
"might help on slow hardrives"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValue: 0
defaultValueDesc: "0"
name: "cache-size"
abbr: "c" }: NBytes
logFile* {.
desc: "Logs to file"
defaultValue: string.none
name: "log-file"
hidden
.}: Option[string]
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
case cmd* {.
defaultValue: noCmd
command }: StartUpCmd
of persistence:
ethProvider* {.
desc: "The URL of the JSON-RPC API of the Ethereum node"
defaultValue: "ws://localhost:8545"
name: "eth-provider"
.}: string
ethAccount* {.
desc: "The Ethereum account that is used for storage contracts"
defaultValue: EthAddress.none
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValueDesc: ""
name: "eth-account"
.}: Option[EthAddress]
ethPrivateKey* {.
desc: "File containing Ethereum private key for storage contracts"
defaultValue: string.none
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValueDesc: ""
name: "eth-private-key"
.}: Option[string]
marketplaceAddress* {.
desc: "Address of deployed Marketplace contract"
defaultValue: EthAddress.none
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValueDesc: ""
name: "marketplace-address"
.}: Option[EthAddress]
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
# TODO: should go behind a feature flag
simulateProofFailures* {.
desc: "Simulates proof failures once every N proofs. 0 = disabled."
defaultValue: 0
name: "simulate-proof-failures"
hidden
.}: int
Validator (#387) * [contracts] Add SlotFreed event * [integration] allow test node to be stopped twice * [cli] add --validator option * [contracts] remove dead code * [contracts] instantiate OnChainMarket and OnChainClock only once * [contracts] add Validation * [sales] remove duplicate import * [market] add missing import * [market] subscribe to all SlotFilled events * [market] add freeSlot() * [sales] fix warnings * [market] subscribe to SlotFreed events * [contracts] fix warning * [validator] keep track of filled slots * [validation] remove slots that have ended * [proving] absorb Proofs into Market Both Proofs and Market are abstractions around the Marketplace contract, having them separately is more trouble than it's worth at the moment. * [market] add markProofAsMissing() * [clock] speed up waiting for clock in tests * [validator] mark proofs as missing * [timer] fix error on node shutdown * [cli] handle --persistence and --validator separately * [market] allow retrieval of proof timeout value * [validator] do not subscribe to SlotFreed events Freed slots are already handled in removeSlotsThatHaveEnded(), and onSlotsFreed() interfered with its iterator. * [validator] Start validation at the start of a new period To decrease the likelihood that we hit the validation timeout. * [validator] do not mark proofs as missing after timeout * [market] check whether proof can be marked as missing * [validator] simplify validation Simulate a transaction to mark proof as missing, instead of trying to keep track of all the conditions that may lead to a proof being marked as missing. * [build] use nim-ethers PR #40 Uses "pending" blocktag instead of "latest" blocktag for better simulation of transactions before sending them. https://github.com/status-im/nim-ethers/pull/40 * [integration] integration test for validator * [validator] monitor a maximum number of slots Adds cli parameter --validator-max-slots. * [market] fix missing collateral argument After rebasing, add the new argument to fillSlot calls. * [build] update to nim-ethers 0.2.5 * [validator] use Set instead of Table to keep track of slots * [validator] add logging * [validator] add test for slot failure * [market] use "pending" blocktag to use more up to date block time * [contracts] remove unused import * [validator] fix: wait until after period ends The smart contract checks that 'end < block.timestamp', so we need to wait until the block timestamp is greater than the period end.
2023-04-19 13:06:00 +00:00
validator* {.
desc: "Enables validator, requires an Ethereum node"
defaultValue: false
name: "validator"
.}: bool
validatorMaxSlots* {.
desc: "Maximum number of slots that the validator monitors"
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
longDesc: "If set to 0, the validator will not limit " &
"the maximum number of slots it monitors"
Validator (#387) * [contracts] Add SlotFreed event * [integration] allow test node to be stopped twice * [cli] add --validator option * [contracts] remove dead code * [contracts] instantiate OnChainMarket and OnChainClock only once * [contracts] add Validation * [sales] remove duplicate import * [market] add missing import * [market] subscribe to all SlotFilled events * [market] add freeSlot() * [sales] fix warnings * [market] subscribe to SlotFreed events * [contracts] fix warning * [validator] keep track of filled slots * [validation] remove slots that have ended * [proving] absorb Proofs into Market Both Proofs and Market are abstractions around the Marketplace contract, having them separately is more trouble than it's worth at the moment. * [market] add markProofAsMissing() * [clock] speed up waiting for clock in tests * [validator] mark proofs as missing * [timer] fix error on node shutdown * [cli] handle --persistence and --validator separately * [market] allow retrieval of proof timeout value * [validator] do not subscribe to SlotFreed events Freed slots are already handled in removeSlotsThatHaveEnded(), and onSlotsFreed() interfered with its iterator. * [validator] Start validation at the start of a new period To decrease the likelihood that we hit the validation timeout. * [validator] do not mark proofs as missing after timeout * [market] check whether proof can be marked as missing * [validator] simplify validation Simulate a transaction to mark proof as missing, instead of trying to keep track of all the conditions that may lead to a proof being marked as missing. * [build] use nim-ethers PR #40 Uses "pending" blocktag instead of "latest" blocktag for better simulation of transactions before sending them. https://github.com/status-im/nim-ethers/pull/40 * [integration] integration test for validator * [validator] monitor a maximum number of slots Adds cli parameter --validator-max-slots. * [market] fix missing collateral argument After rebasing, add the new argument to fillSlot calls. * [build] update to nim-ethers 0.2.5 * [validator] use Set instead of Table to keep track of slots * [validator] add logging * [validator] add test for slot failure * [market] use "pending" blocktag to use more up to date block time * [contracts] remove unused import * [validator] fix: wait until after period ends The smart contract checks that 'end < block.timestamp', so we need to wait until the block timestamp is greater than the period end.
2023-04-19 13:06:00 +00:00
defaultValue: 1000
name: "validator-max-slots"
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
.}: MaxSlots
validatorGroups* {.
desc: "Slot validation groups"
longDesc: "A number indicating total number of groups into " &
"which the whole slot id space will be divided. " &
"The value must be in the range [2, 65535]. " &
"If not provided, the validator will observe " &
"the whole slot id space and the value of " &
"the --validator-group-index parameter will be ignored. " &
"Powers of twos are advised for even distribution"
defaultValue: ValidationGroups.none
name: "validator-groups"
.}: Option[ValidationGroups]
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
validatorGroupIndex* {.
desc: "Slot validation group index"
longDesc: "The value provided must be in the range " &
"[0, validatorGroups). Ignored when --validator-groups " &
"is not provided. Only slot ids satisfying condition " &
"[(slotId mod validationGroups) == groupIndex] will be " &
"observed by the validator"
defaultValue: 0
name: "validator-group-index"
.}: uint16
Validator (#387) * [contracts] Add SlotFreed event * [integration] allow test node to be stopped twice * [cli] add --validator option * [contracts] remove dead code * [contracts] instantiate OnChainMarket and OnChainClock only once * [contracts] add Validation * [sales] remove duplicate import * [market] add missing import * [market] subscribe to all SlotFilled events * [market] add freeSlot() * [sales] fix warnings * [market] subscribe to SlotFreed events * [contracts] fix warning * [validator] keep track of filled slots * [validation] remove slots that have ended * [proving] absorb Proofs into Market Both Proofs and Market are abstractions around the Marketplace contract, having them separately is more trouble than it's worth at the moment. * [market] add markProofAsMissing() * [clock] speed up waiting for clock in tests * [validator] mark proofs as missing * [timer] fix error on node shutdown * [cli] handle --persistence and --validator separately * [market] allow retrieval of proof timeout value * [validator] do not subscribe to SlotFreed events Freed slots are already handled in removeSlotsThatHaveEnded(), and onSlotsFreed() interfered with its iterator. * [validator] Start validation at the start of a new period To decrease the likelihood that we hit the validation timeout. * [validator] do not mark proofs as missing after timeout * [market] check whether proof can be marked as missing * [validator] simplify validation Simulate a transaction to mark proof as missing, instead of trying to keep track of all the conditions that may lead to a proof being marked as missing. * [build] use nim-ethers PR #40 Uses "pending" blocktag instead of "latest" blocktag for better simulation of transactions before sending them. https://github.com/status-im/nim-ethers/pull/40 * [integration] integration test for validator * [validator] monitor a maximum number of slots Adds cli parameter --validator-max-slots. * [market] fix missing collateral argument After rebasing, add the new argument to fillSlot calls. * [build] update to nim-ethers 0.2.5 * [validator] use Set instead of Table to keep track of slots * [validator] add logging * [validator] add test for slot failure * [market] use "pending" blocktag to use more up to date block time * [contracts] remove unused import * [validator] fix: wait until after period ends The smart contract checks that 'end < block.timestamp', so we need to wait until the block timestamp is greater than the period end.
2023-04-19 13:06:00 +00:00
feat: add `--payout-address` (#870) * feat: add `--payout-address` Allows SPs to be paid out to a separate address, keeping their profits secure. Supports https://github.com/codex-storage/codex-contracts-eth/pull/144 in the nim-codex client. * Remove optional payoutAddress Change --payout-address so that it is no longer optional. There is no longer an overload in `Marketplace.sol` for `fillSlot` accepting no `payoutAddress`. * Update integration tests to include --payout-address * move payoutAddress from fillSlot to freeSlot * Update integration tests to use required payoutAddress - to make payoutAddress required, the integration tests needed to avoid building the cli params until just before starting the node, otherwise if cli params were added ad-hoc, there would be an error after a non-required parameter was added before a required parameter. * support client payout address - withdrawFunds requires a withdrawAddress parameter, directs payouts for withdrawing of client funds (for a cancelled request) to go to that address. * fix integration test adds --payout-address to validators * refactor: support withdrawFunds and freeSlot optional parameters - withdrawFunds has an optional parameter for withdrawRecipient - freeSlot has optional parameters for rewardRecipient and collateralRecipient - change --payout-address to --reward-recipient to match contract signature naming * Revert "Update integration tests to include --payout-address" This reverts commit 8f9535cf35b0f2b183ac4013a7ed11b246486964. There are some valid improvements to the integration tests, but they can be handled in a separate PR. * small fix * bump contracts to fix marketplace spec * bump codex-contracts-eth, now rebased on master * bump codex-contracts-eth now that feat/reward-address has been merged to master * clean up, comments
2024-09-17 04:18:15 +00:00
rewardRecipient* {.
desc: "Address to send payouts to (eg rewards and refunds)"
name: "reward-recipient"
.}: Option[EthAddress]
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
case persistenceCmd* {.
defaultValue: noCmd
command }: PersistenceCmd
of PersistenceCmd.prover:
Rework circuit downloader (#882) * Introduces a start method to prover * Moves backend creation into start method * sets up three paths for backend initialization * Extracts backend initialization to backend-factory * Implements loading backend from cli files or previously downloaded local files * Wires up downloading and unzipping * functional implementation * Fixes testprover.nim * Sets up tests for backendfactory * includes libzip-dev * pulls in updated contracts * removes integration cli tests for r1cs, wasm, and zkey file arguments. * Fixes issue where inner-scope values are lost before returning * sets local proof verification for dist-test images * Adds two traces and bumps nim-ethers * Adds separate path for circuit files * Create circuit dir if not exists * fix: make sure requestStorage is mined * fix: correct place to plug confirm * test: fixing contracts tests * Restores gitmodules * restores nim-datastore reference * Sets up downloader exe * sets up tool skeleton * implements getting of circuit hash * Implements downloader tool * sets up test skeleton * Implements test for cirdl * includes testTools in testAll * Cleanup building.md * cleans up previous downloader implementation * cleans up testbackendfactory * moves start of prover into node.nim * Fills in arguments in example command * Initializes backend in prover constructor * Restores tests * Restores tests for cli instructions * Review comments by Dmitriy, part 1 * Quotes path in download instruction. * replaces curl with chronos http session * Moves cirdl build output to 'build' folder. * Fixes chronicles log output * Add cirdl support to the codex Dockerfile Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the docker entrypoint Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the release workflow Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Disable verify_circuit flag for releases Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Removes backendFactory placeholder type * wip * Replaces zip library with status-im/zippy library (which supports zip and tar) * Updates cirdl to not change circuitdir folder * Switches from zip to tar.gz * Review comments by Dmitriy * updates codex-contracts-eth * Adds testTools to CI * Adds check for access to config.circuitdir * Update fixture circuit zkey * Update matrix to run tools tests on Windows * Adds 'deps' dependency for cirdl * Adjust docker-entrypoint.sh to use CODEX_CIRCUIT_DIR env var * Review comments by Giuliano --------- Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> Co-authored-by: Adam Uhlíř <adam@uhlir.dev> Co-authored-by: Veaceslav Doina <20563034+veaceslavdoina@users.noreply.github.com>
2024-09-23 14:37:17 +00:00
circuitDir* {.
desc: "Directory where Codex will store proof circuit data"
defaultValue: DefaultCircuitDir
defaultValueDesc: $DefaultCircuitDir
abbr: "cd"
name: "circuit-dir" }: OutDir
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
circomR1cs* {.
desc: "The r1cs file for the storage circuit"
Rework circuit downloader (#882) * Introduces a start method to prover * Moves backend creation into start method * sets up three paths for backend initialization * Extracts backend initialization to backend-factory * Implements loading backend from cli files or previously downloaded local files * Wires up downloading and unzipping * functional implementation * Fixes testprover.nim * Sets up tests for backendfactory * includes libzip-dev * pulls in updated contracts * removes integration cli tests for r1cs, wasm, and zkey file arguments. * Fixes issue where inner-scope values are lost before returning * sets local proof verification for dist-test images * Adds two traces and bumps nim-ethers * Adds separate path for circuit files * Create circuit dir if not exists * fix: make sure requestStorage is mined * fix: correct place to plug confirm * test: fixing contracts tests * Restores gitmodules * restores nim-datastore reference * Sets up downloader exe * sets up tool skeleton * implements getting of circuit hash * Implements downloader tool * sets up test skeleton * Implements test for cirdl * includes testTools in testAll * Cleanup building.md * cleans up previous downloader implementation * cleans up testbackendfactory * moves start of prover into node.nim * Fills in arguments in example command * Initializes backend in prover constructor * Restores tests * Restores tests for cli instructions * Review comments by Dmitriy, part 1 * Quotes path in download instruction. * replaces curl with chronos http session * Moves cirdl build output to 'build' folder. * Fixes chronicles log output * Add cirdl support to the codex Dockerfile Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the docker entrypoint Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the release workflow Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Disable verify_circuit flag for releases Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Removes backendFactory placeholder type * wip * Replaces zip library with status-im/zippy library (which supports zip and tar) * Updates cirdl to not change circuitdir folder * Switches from zip to tar.gz * Review comments by Dmitriy * updates codex-contracts-eth * Adds testTools to CI * Adds check for access to config.circuitdir * Update fixture circuit zkey * Update matrix to run tools tests on Windows * Adds 'deps' dependency for cirdl * Adjust docker-entrypoint.sh to use CODEX_CIRCUIT_DIR env var * Review comments by Giuliano --------- Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> Co-authored-by: Adam Uhlíř <adam@uhlir.dev> Co-authored-by: Veaceslav Doina <20563034+veaceslavdoina@users.noreply.github.com>
2024-09-23 14:37:17 +00:00
defaultValue: $DefaultCircuitDir / "proof_main.r1cs"
defaultValueDesc: $DefaultCircuitDir & "/proof_main.r1cs"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
name: "circom-r1cs"
.}: InputFile
circomWasm* {.
desc: "The wasm file for the storage circuit"
Rework circuit downloader (#882) * Introduces a start method to prover * Moves backend creation into start method * sets up three paths for backend initialization * Extracts backend initialization to backend-factory * Implements loading backend from cli files or previously downloaded local files * Wires up downloading and unzipping * functional implementation * Fixes testprover.nim * Sets up tests for backendfactory * includes libzip-dev * pulls in updated contracts * removes integration cli tests for r1cs, wasm, and zkey file arguments. * Fixes issue where inner-scope values are lost before returning * sets local proof verification for dist-test images * Adds two traces and bumps nim-ethers * Adds separate path for circuit files * Create circuit dir if not exists * fix: make sure requestStorage is mined * fix: correct place to plug confirm * test: fixing contracts tests * Restores gitmodules * restores nim-datastore reference * Sets up downloader exe * sets up tool skeleton * implements getting of circuit hash * Implements downloader tool * sets up test skeleton * Implements test for cirdl * includes testTools in testAll * Cleanup building.md * cleans up previous downloader implementation * cleans up testbackendfactory * moves start of prover into node.nim * Fills in arguments in example command * Initializes backend in prover constructor * Restores tests * Restores tests for cli instructions * Review comments by Dmitriy, part 1 * Quotes path in download instruction. * replaces curl with chronos http session * Moves cirdl build output to 'build' folder. * Fixes chronicles log output * Add cirdl support to the codex Dockerfile Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the docker entrypoint Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the release workflow Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Disable verify_circuit flag for releases Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Removes backendFactory placeholder type * wip * Replaces zip library with status-im/zippy library (which supports zip and tar) * Updates cirdl to not change circuitdir folder * Switches from zip to tar.gz * Review comments by Dmitriy * updates codex-contracts-eth * Adds testTools to CI * Adds check for access to config.circuitdir * Update fixture circuit zkey * Update matrix to run tools tests on Windows * Adds 'deps' dependency for cirdl * Adjust docker-entrypoint.sh to use CODEX_CIRCUIT_DIR env var * Review comments by Giuliano --------- Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> Co-authored-by: Adam Uhlíř <adam@uhlir.dev> Co-authored-by: Veaceslav Doina <20563034+veaceslavdoina@users.noreply.github.com>
2024-09-23 14:37:17 +00:00
defaultValue: $DefaultCircuitDir / "proof_main.wasm"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValueDesc: $DefaultDataDir & "/circuits/proof_main.wasm"
name: "circom-wasm"
.}: InputFile
circomZkey* {.
desc: "The zkey file for the storage circuit"
Rework circuit downloader (#882) * Introduces a start method to prover * Moves backend creation into start method * sets up three paths for backend initialization * Extracts backend initialization to backend-factory * Implements loading backend from cli files or previously downloaded local files * Wires up downloading and unzipping * functional implementation * Fixes testprover.nim * Sets up tests for backendfactory * includes libzip-dev * pulls in updated contracts * removes integration cli tests for r1cs, wasm, and zkey file arguments. * Fixes issue where inner-scope values are lost before returning * sets local proof verification for dist-test images * Adds two traces and bumps nim-ethers * Adds separate path for circuit files * Create circuit dir if not exists * fix: make sure requestStorage is mined * fix: correct place to plug confirm * test: fixing contracts tests * Restores gitmodules * restores nim-datastore reference * Sets up downloader exe * sets up tool skeleton * implements getting of circuit hash * Implements downloader tool * sets up test skeleton * Implements test for cirdl * includes testTools in testAll * Cleanup building.md * cleans up previous downloader implementation * cleans up testbackendfactory * moves start of prover into node.nim * Fills in arguments in example command * Initializes backend in prover constructor * Restores tests * Restores tests for cli instructions * Review comments by Dmitriy, part 1 * Quotes path in download instruction. * replaces curl with chronos http session * Moves cirdl build output to 'build' folder. * Fixes chronicles log output * Add cirdl support to the codex Dockerfile Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the docker entrypoint Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Add cirdl support to the release workflow Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Disable verify_circuit flag for releases Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> * Removes backendFactory placeholder type * wip * Replaces zip library with status-im/zippy library (which supports zip and tar) * Updates cirdl to not change circuitdir folder * Switches from zip to tar.gz * Review comments by Dmitriy * updates codex-contracts-eth * Adds testTools to CI * Adds check for access to config.circuitdir * Update fixture circuit zkey * Update matrix to run tools tests on Windows * Adds 'deps' dependency for cirdl * Adjust docker-entrypoint.sh to use CODEX_CIRCUIT_DIR env var * Review comments by Giuliano --------- Signed-off-by: Slava <20563034+veaceslavdoina@users.noreply.github.com> Co-authored-by: Adam Uhlíř <adam@uhlir.dev> Co-authored-by: Veaceslav Doina <20563034+veaceslavdoina@users.noreply.github.com>
2024-09-23 14:37:17 +00:00
defaultValue: $DefaultCircuitDir / "proof_main.zkey"
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
defaultValueDesc: $DefaultDataDir & "/circuits/proof_main.zkey"
name: "circom-zkey"
.}: InputFile
# TODO: should probably be hidden and behind a feature flag
circomNoZkey* {.
desc: "Ignore the zkey file - use only for testing!"
defaultValue: false
name: "circom-no-zkey"
.}: bool
numProofSamples* {.
desc: "Number of samples to prove"
defaultValue: DefaultSamplesNum
defaultValueDesc: $DefaultSamplesNum
name: "proof-samples" }: int
maxSlotDepth* {.
desc: "The maximum depth of the slot tree"
defaultValue: DefaultMaxSlotDepth
defaultValueDesc: $DefaultMaxSlotDepth
name: "max-slot-depth" }: int
maxDatasetDepth* {.
desc: "The maximum depth of the dataset tree"
defaultValue: DefaultMaxDatasetDepth
defaultValueDesc: $DefaultMaxDatasetDepth
name: "max-dataset-depth" }: int
maxBlockDepth* {.
desc: "The maximum depth of the network block merkle tree"
defaultValue: DefaultBlockDepth
defaultValueDesc: $DefaultBlockDepth
name: "max-block-depth" }: int
maxCellElms* {.
desc: "The maximum number of elements in a cell"
defaultValue: DefaultCellElms
defaultValueDesc: $DefaultCellElms
name: "max-cell-elements" }: int
of PersistenceCmd.noCmd:
discard
of StartUpCmd.noCmd:
discard # end of persistence
Node setup (#32) * settup basic nim node * adding http utils * adding confutils * rough rest api proto * adding missing deps * turn tls emulation off * adding toml serialization * wip * adding missing deps * make sure to clean old state in teardown * adding file upload rest endpoint * renaming blockexchange to networkstore * updating nim-presto * updating libp2p * wip adding streaming upload * reworked chunking * bump to latest unstable * adding asyncfutures stream * make streamable * deleting unused files * reworking stores api * use new stores api * rework blockset and remove blockstream * don't return option from constructor * rework chunker * wip implement upload * fix tests * move unrelated logic to engine * don't print entire message * logging * basic encode/decode to/from dag-pb * add basic upload/download support * fix tests * renaming blockset to manifest * don't pass config to node * remove config and use new manifest * wip: make endpoints more reliable * wip: adding node tests * include correct manifest test * removing asyncfutures * proper chunking of files * simplify stream reading * test with encoding/decoding with many blocks * add block storing tests * adding retrieval test * add logging * tidy up chunker * tidy up manifest and node * use default chunk size * fix tests * fix tests * make sure Eof is set properly * wip * minor cleanup * add file utils * cleanup config * splitout DaggerServer and "main" * remove events since they are not used * add broadcast method to network peer * add and wire localstore * use localstore in the node * wip * logging * move file utils * use the constant * updating deps * fix memstore * use latest libp2p unstable * fix tests * rework block streaming * don't fail storing if the block already exists * add helper info endpoint * correct comment * rename localstore to fsstore * fix tests * remove unused tests * add test to retrieve one block * move some test files around * consolidate setup * Update dagger/blockexchange/engine.nim Co-authored-by: Tanguy <tanguy@status.im> * typo * better block path handling * don't inherit rootobj * remove useless template * Update tests/dagger/blockexc/testblockexc.nim Co-authored-by: markspanbroek <mark@spanbroek.net> * use isMainModule * use proper flag for starter/stoped * cleanup optional use * wrap in isMainModule * use `cancelAndAwait` * remove unused imports * wip * don't use optional * use functional error api * rework store tests and add fs tests * Block.new() to Block.init() * don't use optional for engine blocks * use result instead of optional for getBlock * remove unused imports * move stopping servers to `shutdown` * use result instead of optional * rework with results * fix tests * use waitFor in signal handlers * error helper * use `?` and mapFailure where possible * remove unnecesary `=?` * improve empty cid digest initialization Co-authored-by: Tanguy <tanguy@status.im> Co-authored-by: markspanbroek <mark@spanbroek.net>
2022-01-10 15:32:56 +00:00
EthAddress* = ethers.Address
feat: create logging proxy (#663) * implement a logging proxy The logging proxy: - prevents the need to import chronicles (as well as export except toJson), - prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization, - and handles json formatting correctly in chronicles json sinks * Rename logging -> logutils to avoid ambiguity with common names * clean up * add setProperty for JsonRecord, remove nim-json-serialization conflict * Allow specifying textlines and json format separately Not specifying a LogFormat will apply the formatting to both textlines and json sinks. Specifying a LogFormat will apply the formatting to only that sink. * remove unneeded usages of std/json We only need to import utils/json instead of std/json * move serialization from rest/json to utils/json so it can be shared * fix NoColors ambiguity Was causing unit tests to fail on Windows. * Remove nre usage to fix Windows error Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :) * Add logutils module doc * Shorten logutils.formatIt for `NBytes` Both json and textlines formatIt were not needed, and could be combined into one formatIt * remove debug integration test config debug output and logformat of json for integration test logs * Use ## module doc to support docgen * bump nim-poseidon2 to export fromBytes Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening. * fixes to get compiling after rebasing master * Add support for Result types being logged using formatIt
2024-01-23 07:35:03 +00:00
logutils.formatIt(LogFormat.textLines, EthAddress): it.short0xHexLog
logutils.formatIt(LogFormat.json, EthAddress): %it
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
func persistence*(self: CodexConf): bool =
self.cmd == StartUpCmd.persistence
func prover*(self: CodexConf): bool =
self.persistence and self.persistenceCmd == PersistenceCmd.prover
proc getCodexVersion(): string =
let tag = strip(staticExec("git tag"))
if tag.isEmptyOrWhitespace:
return "untagged build"
return tag
proc getCodexRevision(): string =
# using a slice in a static context breaks nimsuggest for some reason
var res = strip(staticExec("git rev-parse --short HEAD"))
return res
proc getNimBanner(): string =
staticExec("nim --version | grep Version")
const
codexVersion* = getCodexVersion()
codexRevision* = getCodexRevision()
nimBanner* = getNimBanner()
2022-05-19 19:56:03 +00:00
codexFullVersion* =
"Codex version: " & codexVersion & "\p" &
"Codex revision: " & codexRevision & "\p" &
nimBanner
proc parseCmdArg*(T: typedesc[MultiAddress],
input: string): MultiAddress
{.upraises: [ValueError, LPError].} =
var ma: MultiAddress
let res = MultiAddress.init(input)
if res.isOk:
ma = res.get()
else:
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
warn "Invalid MultiAddress", input=input, error = res.error()
quit QuitFailure
ma
2022-04-12 13:21:07 +00:00
proc parseCmdArg*(T: type SignedPeerRecord, uri: string): T =
var res: SignedPeerRecord
try:
if not res.fromURI(uri):
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
warn "Invalid SignedPeerRecord uri", uri = uri
quit QuitFailure
except CatchableError as exc:
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
warn "Invalid SignedPeerRecord uri", uri = uri, error = exc.msg
quit QuitFailure
res
proc parseCmdArg*(T: type EthAddress, address: string): T =
EthAddress.init($address).get()
proc parseCmdArg*(T: type NBytes, val: string): T =
var num = 0'i64
let count = parseSize(val, num, alwaysBin = true)
if count == 0:
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
warn "Invalid number of bytes", nbytes = val
quit QuitFailure
NBytes(num)
proc parseCmdArg*(T: type Duration, val: string): T =
var dur: Duration
let count = parseDuration(val, dur)
if count == 0:
Prover CLI updates (#735) * rework cli to accept circuit params * check circom files extension * adding new required cli changes * don't use ufcs * persistence is a command now * use `nimOldCaseObjects` switch for nim confutils compat * misc * Update cli integration tests * Fix: simulateProofFailures option is not for validator * moving circom params under `prover` command * update tests * Use circuit assets from codex-contract-eth in tests * Add "prover" cli command to tests * use correct stores * make `verifier` a cmd option * update circuit artifacts path * fix cli tests * Update integration tests to use cli commands Integration tests have been updated to use the new cli commands. The api for usage in the integration tests has also changed a bit. Proofs tests have been updated to use 5 nodes and 8 blocks of data. The remaining integration tests also need to be updated. * remove parsedCli from CodexConfig Instead, parse the cli args on the fly when needed * remove unneeded gcsafes * graceful shutdowns Where possible, do not raise assert, as other nodes in the test may already be running. Instead, raise exceptions, catch them in multinodes.nim, and attempt to do a teardown before failing the test. `abortOnError` is set to true so that `fail()` will quit immediately, after teardown has been run. * update testmarketplace to new api, with valid EC params --------- Co-authored-by: Dmitriy Ryajov <dryajov@gmail.com> Co-authored-by: Eric <5089238+emizzle@users.noreply.github.com>
2024-03-12 09:57:13 +00:00
warn "Cannot parse duration", dur = dur
quit QuitFailure
dur
proc readValue*(r: var TomlReader, val: var EthAddress)
{.upraises: [SerializationError, IOError].} =
val = EthAddress.init(r.readValue(string)).get()
proc readValue*(r: var TomlReader, val: var SignedPeerRecord) =
without uri =? r.readValue(string).catch, err:
error "invalid SignedPeerRecord configuration value", error = err.msg
quit QuitFailure
val = SignedPeerRecord.parseCmdArg(uri)
proc readValue*(r: var TomlReader, val: var MultiAddress) =
without input =? r.readValue(string).catch, err:
error "invalid MultiAddress configuration value", error = err.msg
quit QuitFailure
let res = MultiAddress.init(input)
if res.isOk:
val = res.get()
else:
warn "Invalid MultiAddress", input=input, error=res.error()
quit QuitFailure
proc readValue*(r: var TomlReader, val: var NBytes)
{.upraises: [SerializationError, IOError].} =
var value = 0'i64
var str = r.readValue(string)
let count = parseSize(str, value, alwaysBin = true)
if count == 0:
error "invalid number of bytes for configuration value", value = str
quit QuitFailure
val = NBytes(value)
proc readValue*(r: var TomlReader, val: var Duration)
{.upraises: [SerializationError, IOError].} =
var str = r.readValue(string)
var dur: Duration
let count = parseDuration(str, dur)
if count == 0:
error "Invalid duration parse", value = str
quit QuitFailure
val = dur
2024-12-18 09:30:48 +00:00
proc readValue*(r: var TomlReader, val: var NatConfig)
{.raises: [SerializationError].} =
val = try: parseCmdArg(NatConfig, r.readValue(string))
except CatchableError as err:
raise newException(SerializationError, err.msg)
# no idea why confutils needs this:
proc completeCmdArg*(T: type EthAddress; val: string): seq[string] =
discard
proc completeCmdArg*(T: type NBytes; val: string): seq[string] =
discard
proc completeCmdArg*(T: type Duration; val: string): seq[string] =
discard
2022-04-12 13:21:07 +00:00
# silly chronicles, colors is a compile-time property
feat: create logging proxy (#663) * implement a logging proxy The logging proxy: - prevents the need to import chronicles (as well as export except toJson), - prevents the need to override `writeValue` or use or import nim-json-seralization elsewhere in the codebase, allowing for sole use of utils/json for de/serialization, - and handles json formatting correctly in chronicles json sinks * Rename logging -> logutils to avoid ambiguity with common names * clean up * add setProperty for JsonRecord, remove nim-json-serialization conflict * Allow specifying textlines and json format separately Not specifying a LogFormat will apply the formatting to both textlines and json sinks. Specifying a LogFormat will apply the formatting to only that sink. * remove unneeded usages of std/json We only need to import utils/json instead of std/json * move serialization from rest/json to utils/json so it can be shared * fix NoColors ambiguity Was causing unit tests to fail on Windows. * Remove nre usage to fix Windows error Windows was erroring with `could not load: pcre64.dll`. Instead of fixing that error, remove the pcre usage :) * Add logutils module doc * Shorten logutils.formatIt for `NBytes` Both json and textlines formatIt were not needed, and could be combined into one formatIt * remove debug integration test config debug output and logformat of json for integration test logs * Use ## module doc to support docgen * bump nim-poseidon2 to export fromBytes Before the changes in this branch, fromBytes was likely being resolved by nim-stew, or other dependency. With the changes in this branch, that dependency was removed and fromBytes could no longer be resolved. By exporting fromBytes from nim-poseidon, the correct resolution is now happening. * fixes to get compiling after rebasing master * Add support for Result types being logged using formatIt
2024-01-23 07:35:03 +00:00
proc stripAnsi*(v: string): string =
2022-04-12 13:21:07 +00:00
var
res = newStringOfCap(v.len)
i: int
while i < v.len:
let c = v[i]
if c == '\x1b':
var
x = i + 1
found = false
while x < v.len: # look for [..m
let c2 = v[x]
if x == i + 1:
if c2 != '[':
break
else:
if c2 in {'0'..'9'} + {';'}:
discard # keep looking
elif c2 == 'm':
i = x + 1
found = true
break
else:
break
inc x
if found: # skip adding c
continue
res.add c
inc i
res
proc updateLogLevel*(logLevel: string) {.upraises: [ValueError].} =
# Updates log levels (without clearing old ones)
let directives = logLevel.split(";")
try:
setLogLevel(parseEnum[LogLevel](directives[0].toUpperAscii))
except ValueError:
Validator - support partitioning of the slot id space (#890) * Adds validatorPartitionSize and validatorPartitionIndex config options * adds partitioning options to the validation type * adds partitioning logic to the validator * ignores partitionIndex when partitionSize is either 0 or 1 * clips the partition index to <<partitionIndex mod partitionSize>> * handles negative values for the validation partition index * updates long description of the new validator cli options * makes default partitionSize to be 0 for better backward compatibility * Improving formatting on validator CLI * reactors validation params into a separate type and simplifies validation of validation params * removes suspected duplication * fixes typo in validator CLI help * updates README * Applies review comments - using optionals and range types to handle validation params * Adds initializer to the configFactory for validatorMaxSlots * [Review] update validator CLI description and README * [Review]: renaming validationParams to validationConfig (config) * [Review]: move validationconfig.nim to a higher level (next to validation.nim) * changes backing type of MaxSlots to be int and makes sure slots are validated without limit when maxSlots is set to 0 * adds more end-to-end test for the validator and the groups * fixes typo in README and conf.nim * makes `maxSlotsConstraintRespected` and `shouldValidateSlot` private + updates the tests * fixes public address of the signer account in the marketplace tutorial * applies review comments - removes two tests
2024-10-02 22:00:40 +00:00
raise (ref ValueError)(
msg: "Please specify one of: trace, debug, " &
"info, notice, warn, error or fatal"
)
if directives.len > 1:
for topicName, settings in parseTopicDirectives(directives[1..^1]):
if not setTopicState(topicName, settings.state, settings.logLevel):
warn "Unrecognized logging topic", topic = topicName
2022-05-19 19:56:03 +00:00
proc setupLogging*(conf: CodexConf) =
when defaultChroniclesStream.outputs.type.arity != 3:
2022-04-12 13:21:07 +00:00
warn "Logging configuration options not enabled in the current build"
else:
var logFile: ?IoHandle
2022-04-12 13:21:07 +00:00
proc noOutput(logLevel: LogLevel, msg: LogOutputStr) = discard
proc writeAndFlush(f: File, msg: LogOutputStr) =
try:
f.write(msg)
f.flushFile()
except IOError as err:
logLoggingFailure(cstring(msg), err)
proc stdoutFlush(logLevel: LogLevel, msg: LogOutputStr) =
writeAndFlush(stdout, msg)
proc noColorsFlush(logLevel: LogLevel, msg: LogOutputStr) =
writeAndFlush(stdout, stripAnsi(msg))
proc fileFlush(logLevel: LogLevel, msg: LogOutputStr) =
if file =? logFile:
if error =? file.writeFile(stripAnsi(msg).toBytes).errorOption:
error "failed to write to log file", errorCode = $error
defaultChroniclesStream.outputs[2].writer = noOutput
if logFilePath =? conf.logFile and logFilePath.len > 0:
let logFileHandle = openFile(
logFilePath,
{OpenFlags.Write, OpenFlags.Create, OpenFlags.Truncate}
)
if logFileHandle.isErr:
error "failed to open log file",
path = logFilePath,
errorCode = $logFileHandle.error
else:
logFile = logFileHandle.option
defaultChroniclesStream.outputs[2].writer = fileFlush
2022-04-12 13:21:07 +00:00
defaultChroniclesStream.outputs[1].writer = noOutput
let writer =
2022-04-12 13:21:07 +00:00
case conf.logFormat:
of LogKind.Auto:
if isatty(stdout):
stdoutFlush
else:
noColorsFlush
of LogKind.Colors: stdoutFlush
of LogKind.NoColors: noColorsFlush
of LogKind.Json:
defaultChroniclesStream.outputs[1].writer = stdoutFlush
noOutput
of LogKind.None:
noOutput
when codex_enable_log_counter:
var counter = 0.uint64
proc numberedWriter(logLevel: LogLevel, msg: LogOutputStr) =
inc(counter)
let withoutNewLine = msg[0..^2]
writer(logLevel, withoutNewLine & " count=" & $counter & "\n")
defaultChroniclesStream.outputs[0].writer = numberedWriter
else:
defaultChroniclesStream.outputs[0].writer = writer
try:
updateLogLevel(conf.logLevel)
except ValueError as err:
try:
stderr.write "Invalid value for --log-level. " & err.msg & "\n"
except IOError:
echo "Invalid value for --log-level. " & err.msg
quit QuitFailure
2022-05-19 19:56:03 +00:00
proc setupMetrics*(config: CodexConf) =
if config.metricsEnabled:
let metricsAddress = config.metricsAddress
notice "Starting metrics HTTP server",
url = "http://" & $metricsAddress & ":" & $config.metricsPort & "/metrics"
try:
startMetricsHttpServer($metricsAddress, config.metricsPort)
except CatchableError as exc:
raiseAssert exc.msg
except Exception as exc:
raiseAssert exc.msg # TODO fix metrics