**Notice**: This document is a work-in-progress for researchers and implementers. This is an accompanying document to [Ethereum 2.0 Phase 1](./), which describes the expected actions of a "validator" participating in the Ethereum 2.0 Phase 1 protocol.
## Table of contents
<!-- TOC -->
<!-- START doctoc generated TOC please keep comment here to allow auto update -->
<!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE -->
<!-- END doctoc generated TOC please keep comment here to allow auto update -->
<!-- /TOC -->
## Introduction
This document represents the expected behavior of an "honest validator" with respect to Phase 1 of the Ethereum 2.0 protocol. This document does not distinguish between a "node" (i.e. the functionality of following and reading the beacon chain) and a "validator client" (i.e. the functionality of actively participating in consensus). The separation of concerns between these (potentially) two pieces of software is left as a design decision that is out of scope.
A validator is an entity that participates in the consensus of the Ethereum 2.0 protocol. This is an optional role for users in which they can post ETH as collateral and verify and attest to the validity of blocks to seek financial returns in exchange for building and securing the protocol. This is similar to proof-of-work networks in which miners provide collateral in the form of hardware/hash-power to seek returns in exchange for building and securing the protocol.
## Prerequisites
This document is an extension of the [Phase 0 -- Validator](../phase0/validator.md). All behaviors and definitions defined in the Phase 0 doc carry over unless explicitly noted or overridden.
All terminology, constants, functions, and protocol mechanics defined in the [Phase 1 -- The Beacon Chain](./beacon-chain.md) and [Phase 1 -- Custody Game](./custody-game.md) docs are requisite for this document and used throughout. Please see the Phase 1 docs before continuing and use as a reference throughout.
## Constants
See constants from [Phase 0 validator guide](../phase0/validator.md#constants).
Becoming a validator in Phase 1 is unchanged from Phase 0. See the [Phase 0 validator guide](../phase0/validator.md#becoming-a-validator) for details.
## Beacon chain validator assignments
Beacon chain validator assignments to beacon committees and beacon block proposal are unchanged from Phase 0. See the [Phase 0 validator guide](../phase0/validator.md#validator-assignments) for details.
## Beacon chain responsibilities
A validator has two primary responsibilities to the beacon chain: [proposing blocks](#block-proposal) and [creating attestations](#attestations-1). Proposals happen infrequently, whereas attestations should be created once per epoch.
These responsibilities are largely unchanged from Phase 0, but utilize the updated `SignedBeaconBlock`, `BeaconBlock`, `BeaconBlockBody`, `Attestation`, and `AttestationData` definitions found in Phase 1. Below notes only the additional and modified behavior with respect to Phase 0.
`slot`, `proposer_index`, `parent_root` fields are unchanged.
#### Constructing the `BeaconBlockBody`
`randao_reveal`, `eth1_data`, and `graffiti` are unchanged.
`proposer_slashings`, `deposits`, and `voluntary_exits` are unchanged.
`attester_slashings` and `attestations` operate exactly as in Phase 0, but with new definitations of `AttesterSlashing` and `Attestation`, along with modified validation conditions found in `process_attester_slashing` and `process_attestation`.
##### Custody slashings
Up to `MAX_CUSTODY_SLASHINGS`, [`CustodySlashing`](./custody-game.md#custodyslashing) objects can be included in the `block`. The custody slashings must satisfy the verification conditions found in [custody slashings processing](./custody-game.md#custody-slashings). The validator receives a small "whistleblower" reward for each custody slashing included (THIS IS NOT CURRENTLY THE CASE BUT PROBABLY SHOULD BE).
##### Custody key reveals
Up to `MAX_CUSTODY_KEY_REVEALS`, [`CustodyKeyReveal`](./custody-game.md#custodykeyreveal) objects can be included in the `block`. The custody key reveals must satisfy the verification conditions found in [custody key reveal processing](./custody-game.md#custody-key-reveals). The validator receives a small reward for each custody key reveal included.
##### Early derived secret reveals
Up to `MAX_EARLY_DERIVED_SECRET_REVEALS`, [`EarlyDerivedSecretReveal`](./custody-game.md#earlyderivedsecretreveal) objects can be included in the `block`. The early derived secret reveals must satisfy the verification conditions found in [early derived secret reveal processing](./custody-game.md#custody-key-reveals). The validator receives a small "whistleblower" reward for each early derived secrete reveal included.
##### Shard transitions
Exactly `MAX_SHARDS` [`ShardTransition`](./beacon-chain#shardtransition) objects are included in the block. Default each to an empty `ShardTransition()`. Then for each committee assigned to the slot with an associated `committee_index` and `shard`, set `shard_transitions[shard] = full_transitions[winning_root]` if the committee had enough weight to form a crosslink this slot.
First retrieve `best_aggregate` from `get_best_light_client_aggregate` where `aggregates` is a list of valid aggregated `LightClientVote`s for the previous slot.
Then:
* Set `light_client_bits = best_aggregate.aggregation_bits`
* Set `light_client_signature = best_aggregate.signature`
if aggregate.slot == get_previous_slot(block.slot) and aggregate.beacon_block_root == block.parent_root
]
return max(
viable_aggregates,
key=lambda a: len([_ for i in a.aggregation_bits if i == 1]),
default=LightClientVote(),
)
```
#### Packaging into a `SignedBeaconBlock`
Packaging into a `SignedBeaconBlock` is unchanged from Phase 0.
### Attesting
A validator is expected to create, sign, and broadcast an attestation during each epoch.
Assignments and the core of this duty are unchanged from Phase 0. There are a few additional fields related to the assigned shard chain and custody bit.
The `Attestation` and `AttestationData` defined in the [Phase 1 Beacon Chain spec]() utilizes `shard_transition_root: Root` rather than a full `ShardTransition`. For the purposes of the validator and p2p layer, a modified `FullAttestationData` and containing `FullAttestation` are used to send the accompanying `ShardTransition` in its entirety. Note that due to the properties of SSZ `hash_tree_root`, the root and signatures of `AttestationData` and `FullAttestationData` are equivalent.
Note the timing of when to create/broadcast is altered from Phase 1.
A validator should create and broadcast the `attestation` to the associated attestation subnet when either (a) the validator has received a valid `BeaconBlock` from the expected beacon block proposer and a valid `ShardBlock` for the expected shard block porposer for the assigned `slot` or (b) one-half of the `slot` has transpired (`SECONDS_PER_SLOT / 2` seconds after the start of `slot`) -- whichever comes _first_.
#### Attestation data
`attestation_data` is constructed in the same manner as Phase 0 but uses `FullAttestationData` with the addition of two fields -- `head_shard_root` and `shard_transition`.
- Let `head_block` be the result of running the fork choice during the assigned slot.
- Let `head_state` be the state of `head_block` processed through any empty slots up to the assigned slot using `process_slots(state, slot)`.
- Let `head_shard_block` be the result of running the fork choice on the assigned shard chain during the assigned slot.
##### Head shard root
Set `attestation_data.head_shard_root = hash_tree_root(head_shard_block)`.
##### Shard transition
Set `shard_transition` to the value returned by `get_shard_transition()`.
In addition to the core beacon chain responsibilities, Phase 1 adds an additional role -- the Light Client Committee -- to aid in light client functionality.
Validators serve on the light client committee for `LIGHT_CLIENT_COMMITTEE_PERIOD` epochs and the assignment to be on a committee is known `LIGHT_CLIENT_COMMITTEE_PERIOD` epochs in advance.
#### Preparation
When `get_current_epoch(state) % LIGHT_CLIENT_COMMITTEE_PERIOD == LIGHT_CLIENT_COMMITTEE_PERIOD - LIGHT_CLIENT_PREPARATION_EPOCHS` each validator must check if they are in the next period light client committee by calling `is_in_next_light_client_committee()`.
If the validator is in the next light client committee, they must join the `light_client_votes` pubsub topic to begin duties at the start of the next period.
During a period of epochs that the validator is a part of the light client committee (`validator_index in get_light_client_committee(state, epoch)`), the validator creates and broadcasts a `LightClientVote` at each slot.
A validator should create and broadcast the `light_client_vote` to the `light_client_votes` pubsub topic when either (a) the validator has received a valid block from the expected block proposer for the current `slot` or (b) two-thirds of the `slot` have transpired (`SECONDS_PER_SLOT / 3` seconds after the start of `slot`) -- whichever comes _first_.
- Let `light_client_committee = get_light_client_committee(state, compute_epoch_at_slot(slot))`
##### Light client vote data
First the validator constructs `light_client_vote_data`, a [`LightClientVoteData`](#lightclientvotedata) object.
* Let `head_block` be the result of running the fork choice during the assigned slot.
* Set `light_client_vote.slot = slot`.
* Set `light_client_vote.beacon_block_root = hash_tree_root(head_block)`.
###### `LightClientVoteData`
```python
class LightClientVoteData(Container):
slot: Slot
beacon_block_root: Root
```
##### Construct vote
Then the validator constructs `light_client_vote`, a [`LightClientVote`](#lightclientvote) object.
* Set `light_client_vote.data = light_client_vote_data`.
* Set `light_client_vote.aggregation_bits` to be a `Bitvector[LIGHT_CLIENT_COMMITTEE_SIZE]`, where the bit of the index of the validator in the `light_client_committee` is set to `0b1` and all other bits are are set to `0b0`.
* Set `light_client_vote.signature = vote_signature` where `vote_signature` is obtained from:
Finally, the validator broadcasts `light_client_vote` to the `light_client_votes` pubsub topic.
#### Light client vote aggregation
Some validators in the light client committee are selected to locally aggregate light client votes with a similar `light_client_vote_data` to their constructed `light_client_vote` for the assigned `slot`.
#### Aggregation selection
A validator is selected to aggregate based upon the return value of `is_light_client_aggregator()`.
If the validator is selected to aggregate (`is_light_client_aggregator()`), they construct an aggregate light client vote via the following.
Collect `light_client_votes` seen via gossip during the `slot` that have an equivalent `light_client_vote_data` to that constructed by the validator, and create a `aggregate_light_client_vote: LightClientVote` with the following fields.
* Set `aggregate_light_client_vote.data = light_client_vote_data` where `light_client_vote_data` is the `LightClientVoteData` object that is the same for each individual light client vote being aggregated.
* Set `aggregate_light_client_vote.aggregation_bits` to be a `Bitvector[LIGHT_CLIENT_COMMITTEE_SIZE]`, where each bit set from each individual light client vote is set to `0b1`.
* Set `aggregate_light_client_vote.signature = aggregate_light_client_signature` where `aggregate_light_client_signature` is obtained from `get_aggregate_light_client_signature`.
signatures = [light_client_vote.signature for light_client_vote in light_client_votes]
return bls.Aggregate(signatures)
```
#### Broadcast aggregate
If the validator is selected to aggregate (`is_light_client_aggregator`), then they broadcast their best aggregate light client vote as a `SignedLightAggregateAndProof` to the global aggregate light client vote channel (`aggregate_light_client_votes`) two-thirds of the way through the `slot`-that is, `SECONDS_PER_SLOT * 2 / 3` seconds after the start of `slot`.
Selection proofs are provided in `LightAggregateAndProof` to prove to the gossip channel that the validator has been selected as an aggregator.
`LightAggregateAndProof` messages are signed by the aggregator and broadcast inside of `SignedLightAggregateAndProof` objects to prevent a class of DoS attacks and message forgeries.
First, `light_aggregate_and_proof = get_light_aggregate_and_proof(state, validator_index, aggregate_light_client_vote, privkey)` is constructed.
Then `signed_light_aggregate_and_proof = SignedLightAggregateAndProof(message=light_aggregate_and_proof, signature=signature)` is constructed and broadast. Where `signature` is obtained from:
