consul/website/source/docs/connect/proxies.html.md

---
layout: "docs"
page_title: "Connect - Proxies"
sidebar_current: "docs-connect-proxies"
description: |-
  A Connect-aware proxy enables unmodified applications to use Connect. A per-service proxy sidecar transparently handles inbound and outbound service connections, automatically wrapping and verifying TLS connections.
---

# Connect Proxies

A Connect-aware proxy enables unmodified applications to use Connect.
A per-service proxy sidecar transparently handles inbound and outbound
service connections, automatically wrapping and verifying TLS connections.

When a proxy is used, the actual service being proxied should only accept
connections on a loopback address. This requires all external connections
to be established via the Connect protocol to provide authentication and
authorization.

Consul supports both _managed_ and _unmanaged_ proxies. A managed proxy
is started, configured, and stopped by Consul. An unmanaged proxy is the
responsibility of the user, like any other Consul service.

~> **Windows Support**: The proxy management feature was designed to run on all platforms but has a known issue on the Windows platform at Beta launch preventing it from starting proxy processes. This will be fixed in a future release.

## Managed Proxies

Managed proxies are started, configured, and stopped by Consul. They are
enabled via basic configurations within the
[service definition](/docs/agent/services.html).
This is the easiest way to start a proxy and allows Consul users to begin
using Connect with only a small configuration change.

Managed proxies also offer the best security. Managed proxies are given
a unique proxy-specific ACL token that allows read-only access to Connect
information for the specific service the proxy is representing. This ACL
token is more restrictive than can be currently expressed manually in
an ACL policy.

The default managed proxy is a basic proxy built-in to Consul and written
in Go. Having a basic built-in proxy allows Consul to have a sane default
with performance that is good enough for most workloads. In some basic
benchmarks, the service-to-service communication over the built-in proxy
could sustain 5 Gbps with a per-hop latency of less than X microseconds. Therefore,
the performance impact of even the basic built-in proxy is minimal.

Consul will be
integrating with advanced proxies in the near future to support more complex
configurations and higher performance. The configuration below is all for
the built-in proxy.

-> **Security note:** 1.) Managed proxies can only be configured
via agent configuration files. They _cannot_ be registered via the HTTP API.
And 2.) Managed proxies are not started at all if Consul is running as root.
Both of these default configurations help prevent arbitrary process
execution or privilege escalation. This behavior can be configured
[per-agent](/docs/agent/options.html#connect_proxy).

### Minimal Configuration

Managed proxies are configured within a
[service definition](/docs/agent/services.html). The simplest possible
managed proxy configuration is an empty configuration. This enables the
default managed proxy and starts a listener for that service:

```json
{
  "service": {
    "name": "redis",
    "port": 6379,
    "connect": { "proxy": {} }
  }
}
```

The listener is started on random port within the configured Connect
port range. It can be discovered using the
[DNS interface](/docs/agent/dns.html#connect-capable-service-lookups)
or
[Catalog API](#).
In most cases, service-to-service communication is established by
a proxy configured with upstreams (described below), which handle the
discovery transparently.

### Upstream Configuration

To transparently discover and establish Connect-based connections to
dependencies, they must be configured with a static port on the managed
proxy configuration:

```json
{
  "service": {
    "name": "web",
    "port": 8080,
    "connect": {
      "proxy": {
        "config": {
          "upstreams": [{
            "destination_name": "redis",
            "local_bind_port": 1234
          }]
        }
      }
    }
  }
}
```

In the example above,
"redis" is configured as an upstream with static port 1234 for service "web".
When a TCP connection is established on port 1234, the proxy
will find Connect-compatible "redis" services via Consul service discovery
and establish a TLS connection identifying as "web".

~> **Security:** Any application that can communicate to the configured
static port will be able to masquerade as the source service ("web" in the
example above). You must either trust any loopback access on that port or
use namespacing techniques provided by your operating system.

For full details of the configurable options available see the [built-in proxy
configuration reference](/docs/connect/configuration.html#built-in-proxy-options).

### Prepared Query Upstreams

The upstream destination may also be a
[prepared query](/api/query.html).
This allows complex service discovery behavior such as connecting to
the nearest neighbor or filtering by tags.

For example, given a prepared query named "nearest-redis" that is
configured to route to the nearest Redis instance, an upstream can be
configured to route to this query. In the example below, any TCP connection
to port 1234 will attempt a Connect-based connection to the nearest Redis
service.

```json
{
  "service": {
    "name": "web",
    "port": 8080,
    "connect": {
      "proxy": {
        "config": {
          "upstreams": [{
            "destination_name": "redis",
            "destination_type": "prepared_query",
            "local_bind_port": 1234
          }]
        }
      }
    }
  }
}
```

-> **Note:** Connect does not currently support cross-datacenter
service communication. Therefore, prepared queries with Connect should
only be used to discover services within a single datacenter. See
[Multi-Datacenter Connect](/docs/connect/index.html#multi-datacenter) for
more information.

For full details of the configurable options available see the [built-in proxy
configuration reference](/docs/connect/configuration.html#built-in-proxy-options).

### Dynamic Upstreams

If an application requires dynamic dependencies that are only available
at runtime, it must currently [natively integrate](/docs/connect/native.html)
with Connect. After natively integrating, the HTTP API or
[DNS interface](/docs/agent/dns.html#connect-capable-service-lookups)
can be used.

### Custom Managed Proxy

[Custom proxies](/docs/connect/proxies/integrate.html) can also be
configured to run as a managed proxy. To configure custom proxies, specify
an alternate command to execute for the proxy:

```json
{
  "service": {
    "name": "web",
    "port": 8080,
    "connect": {
      "proxy": {
        "exec_mode": "daemon",
        "command":   ["/usr/bin/my-proxy", "-flag-example"]
      }
    }
  }
}
```

The `exec_mode` value specifies how the proxy is executed. The only
supported value at this time is "daemon". The command is the binary and
any arguments to execute.
The "daemon" mode expects a proxy to run as a long-running, blocking
process. It should not double-fork into the background. The custom
proxy should retrieve its configuration (such as the port to run on)
via the [custom proxy integration APIs](/docs/connect/proxies/integrate.html).

The default proxy command can be changed at an agent-global level
in the agent configuration. An example in HCL format is shown below.

```
connect {
  proxy_defaults {
    command = ["/usr/bin/my-proxy"]
  }
}
```

With this configuration, all services registered without an explicit
proxy command will use `my-proxy` instead of the default built-in proxy.

## Unmanaged Proxies

Unmanaged proxies are regular Consul services that are registered as a
proxy type and declare the service they represent. The proxy process must
be started, configured, and stopped manually by some external process such
as an operator or scheduler.

To declare a service as a proxy, the service definition must contain
at least two additional fields:

  * `Kind` (string) must be set to `connect-proxy`. This declares that the
    service is a proxy type.

  * `ProxyDestination` (string) must be set to the service that this proxy
    is representing.

  * `Port` must be set so that other Connect services can discover the exact
    address for connections. `Address` is optional if the service is being
    registered against an agent, since it'll inherit the node address.

Example:

```json
{
  "Name": "redis-proxy",
  "Kind": "connect-proxy",
  "ProxyDestination": "redis",
  "Port": 8181
}
```

With this service registered, any Connect proxies searching for a
Connect-capable endpoint for "redis" will find this proxy.